Blue Razz Lemonade Hayati Pro Max Plus 4000 Replacement Pods

Overview

The Blue Razz Lemonade Hayati Pro Max Plus 4000 Replacement Pods by Hayati in Blue Razz Lemonade at 10mg and 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Overview: Hayati Pro Max Plus 4000 Replacement Pods in Blue Razz Lemonade

The Hayati Pro Max Plus 4000 Replacement Pods in Blue Razz Lemonade are prefilled pods designed to click into a compatible Hayati Pro Max Plus battery base. The idea is simple. You keep the rechargeable base, and when a pod runs dry you swap in a fresh one rather than throwing the whole device away. That model has become far more relevant to UK vapers since the ban on single-use vapes came into force on 1 June 2025, because a reusable base with replaceable pods sits on the right side of that change while still giving you the convenience of a prefilled, no-maintenance format.

This listing is for the pod only. The battery base is not included, so if you do not already own a compatible Hayati Pro Max Plus device you will need to buy one separately before the pod is of any use. The pod is the consumable part of the system. It holds the e-liquid reservoir, the mesh coil and the mouthpiece in one sealed unit, and it is the component you will replace repeatedly over the life of the base.

Blue Razz Lemonade pairs a blue raspberry candy note with a tart, sparkling lemonade finish. It sits in the sweet-and-sour corner of the fruit range, which is a popular style among UK vapers who find plain fruit flavours a little flat and ice-heavy flavours a little cold.

Here is the short version of what you are buying:

• Product type: prefilled replacement pod, flavour Blue Razz Lemonade
• Rated capacity: up to 4000 puffs per pod, which is the manufacturer's headline rating rather than a guaranteed figure
• Heating element: a mesh coil built into the pod
• Nicotine: nicotine salt e-liquid, with the UK maximum of 20mg/ml (2%) as the top strength; always check the strength on the variant you select
• Activation: draw-activated, so there is no button to press
• Compatibility: designed for the Hayati Pro Max Plus battery base

The rest of this guide covers how the pod performs, what the flavour actually tastes like, how the hardware is put together, how to use it, how to fix common problems, and how it stacks up against other options on the UK market. It is written to help you decide whether this specific pod suits you, and equally to point out where it might not.

Performance and puff delivery

The headline figure is up to 4000 puffs per pod. As with every puff rating in the vape industry, that number comes from machine testing under fixed conditions, usually short, evenly spaced draws that bear little resemblance to how people really vape. Your own result will depend on how long you draw for, how often you vape, and how much you chain puff. Treat 4000 as a ceiling and think of a realistic range as somewhat below it.

To put it in everyday terms, a moderate user taking around 200 to 300 puffs a day would expect a pod to last roughly two to three weeks. A heavy user who is replacing a pack-a-day cigarette habit and vaping constantly may get through a pod in about a week. A light, occasional user could stretch one pod across a month or more, although e-liquid left sitting in a pod for a long time can lose some of its vibrancy, so there is a point where slower is not better.

In terms of delivery, this is a mouth-to-lung (MTL) style experience. You draw gently into your mouth first, then inhale. The airflow is moderately restricted, which keeps the vapour dense and the flavour concentrated on a small hit. It is not designed for large, airy clouds. If you want big vapour production, a sub-ohm tank with freebase liquid is the correct tool, and this pod will frustrate you.

What you can expect from a healthy pod:

• Consistent output early on: the first several hundred puffs usually deliver the cleanest, most defined flavour.
• Gradual softening: as the liquid level drops, the flavour tends to mellow slightly, and the last stretch can taste a touch flatter.
• Steady throat hit: nicotine salt keeps the hit smooth rather than harsh, even at the top UK strength.
• Quick ramp-up: mesh coils heat fast, so there is little delay between drawing and getting vapour.

One honest caveat. If you vape in rapid succession, the coil can run hot and the vapour may taste slightly toasted. Leaving a few seconds between draws avoids this and also makes the pod last longer.

Blue Razz Lemonade flavour profile

Blue raspberry is a flavour that does not exist in nature as a single fruit. It is a candy profile, built from a bright, slightly tangy raspberry note with a sweet, almost syrupy backbone. Anyone who has had a blue slush drink or a blue ice lolly will recognise it straight away. Blue Razz Lemonade takes that familiar candy base and adds a lemonade element on top, which changes the character of the whole thing.

On the inhale, the blue raspberry leads. It is sweet and rounded, with a vivid berry quality that arrives quickly. Partway through the draw the lemon begins to cut in, bringing a clean citrus tartness that stops the sweetness from becoming heavy. On the exhale you are left with a lingering lemonade finish: light, slightly sparkling, and mildly sour rather than sharp.

This balance is the real point of the flavour. Straight blue raspberry liquids can feel cloying after an hour of vaping, because the sugar-like sweetness builds up on the palate. The lemon acts as a counterweight, so the flavour stays refreshing for longer. It is the same logic that makes a squeeze of lemon work in a sweet cocktail.

A rough tasting breakdown:

• Top note: blue raspberry candy, sweet and juicy
• Middle: a tart lemon edge that brightens the draw
• Finish: soft lemonade sweetness with a faint fizzy impression
• Cooling: little to none, so it should not feel icy; this is a fruit flavour, not a menthol blend

Who will enjoy it? People who like sweet-and-sour sweets, fizzy drinks, or the blue raspberry flavours common in other disposable and pod ranges. Who may not? Anyone who dislikes artificial-leaning candy profiles, or prefers a natural, juicy fruit taste, might find it a bit sugary. Equally, if you want a strong menthol kick you should look at an ice flavour instead.

As with all prefilled pods, flavour intensity is a matter of personal perception, and your palate will shift over a few days of vaping the same thing. If you find it too sweet at first, give it a couple of days before judging.

Design and build quality

The pod is a compact, sealed plastic cartridge intended to seat firmly into the top of the Hayati Pro Max Plus battery base. It carries the mouthpiece at the top, a transparent or translucent reservoir window so you can see the liquid level, and the contacts at the bottom that connect to the base and power the mesh coil. Because it is a prefilled design, there is no fill port to open, no coil to prime separately and no liquid to spill.

Build quality in this category is generally judged on four things, and they are worth checking when your pod arrives:

• Seating: the pod should click in with a firm, positive fit and should not rattle or wobble once inserted.
• Seals: the mouthpiece and the base of the pod should be dry. A little condensation on the mouthpiece is normal, but liquid pooling around the contacts is not.
• Mouthpiece shape: a comfortable, slightly rounded mouthpiece makes a real difference over a long session, and this one is shaped for an easy lip fit.
• Clarity: the liquid window should show a clean, even level with no large air pockets trapped on arrival.

The liquid itself is tinted to suit the flavour, so expect a blue-leaning hue through the window rather than a clear liquid. That tint is cosmetic and does not affect how the pod performs.

Because the pod is a consumable, the design priority is reliability and ease rather than longevity of the plastic itself. That said, handle it with a little care. Dropping a pod onto a hard floor can crack the reservoir or loosen the seal, which leads to leaks. Avoid storing pods loose in a pocket with keys or coins, and keep them out of direct sunlight or hot cars, as heat thins the liquid and encourages weeping.

The pod and base together are pocketable and light. The pod itself weighs very little, so the overall feel is dominated by the battery base. If you already like the ergonomics of your Hayati base, a replacement pod will feel exactly the same in hand, which is one of the quiet advantages of sticking with a single system.

Battery and charging: what the base does

The pod has no battery of its own. All the power comes from the Hayati Pro Max Plus base it clicks into. This is an important point, because it means the battery on the base is what determines how many pods you can get through before the hardware needs attention, and it is the thing you charge between pods.

For a device in the 4000-puff class, a rechargeable battery in the region of 600 to 650mAh is typical. That is a sensible match for a pod of this size, because it supplies enough energy to run one pod's worth of liquid, with a bit of margin. Exact capacity is set by the manufacturer and varies between revisions, so if the precise figure matters to you, check the base's own listing.

Charging is done over USB-C, the same connector used by most current phones, tablets and earbuds, so you almost certainly already have a suitable cable somewhere in the house. Some practical guidelines:

• Use a standard 5V adapter or a computer USB port: there is no benefit to a high-wattage fast charger, and a basic phone charger is fine.
• Do not leave it charging unattended overnight on a soft surface: charge on a hard, non-flammable surface where you can see it.
• Top up rather than run to zero: lithium cells are happier when not repeatedly fully drained.
• Stop if it gets hot: a warm base is normal; a base too hot to hold is not, and should be unplugged and checked.
• Use an undamaged cable: frayed or bent cables are a common cause of charging faults.

When the battery runs low, the base typically signals it with an indicator light. If the light flashes and the device stops responding, plug it in. A full charge generally takes in the region of an hour or so depending on the adapter, which is a short wait compared with the time a pod lasts.

Battery safety matters. Lithium cells that are punctured, crushed or overheated can fail dangerously. Never charge a visibly swollen or damaged base. When a base eventually reaches the end of its life, do not put it in household rubbish or recycling. Take it to a retailer with a take-back scheme or a household waste recycling centre that accepts small electricals and batteries.

Mesh coil technology explained

Inside the pod, the heating element is a mesh coil. Older vape pods used a wound coil, which is a thin wire wrapped around a wick of cotton. A mesh coil replaces the wire with a flat, perforated metal sheet, usually formed into a small curved or cylindrical shape that sits against the cotton. The key difference is surface area. A mesh sheet touches far more of the wick than a thin wire does, so heat is spread across a larger area.

This has three practical effects that you will notice when vaping:

• More even heating: the liquid is vaporised more uniformly, which reduces the hot spots that cause a burnt or acrid taste.
• Better flavour definition: because the temperature is steadier, fruit and citrus notes come through more clearly, and a layered flavour like blue raspberry with lemon benefits noticeably from that.
• Faster response: mesh warms up quickly, so draws feel immediate rather than laggy.

The coil resistance in pods of this type typically sits near one ohm, though the exact figure is fixed by the manufacturer and cannot be changed. A resistance in that area suits mouth-to-lung vaping with nicotine salts. Much lower resistance coils are built for direct-to-lung vaping with high-power devices, which is a different style of vaping altogether.

There is a trade-off worth knowing about. Mesh coils are more sensitive to being run dry than some wound coils. If you keep drawing on a pod that has run out of liquid, or if the cotton has not had a chance to soak after a long period of storage, the mesh can scorch the wick. This produces a harsh, burnt taste that does not go away, and at that point the pod is finished. The remedy is straightforward. When a brand new pod is inserted, take two or three gentle draws without firing at full length, or simply wait a minute so the cotton can saturate. And do not keep vaping a pod once the flavour has clearly faded and the window shows almost no liquid.

Because the coil is built into the pod and cannot be replaced separately, you never need to prime, clean or rewick anything. A new pod is a new coil.

Nicotine strength guidance

In the UK, the maximum permitted strength for nicotine e-liquid is 20mg/ml, which is 2 percent. Nothing sold legally here exceeds that, and it is the figure you will most often see on prefilled pods of this kind. Always confirm the strength shown on the variant you select and on the pod label itself before you vape, because it is the label on the product in your hand that matters.

These pods use nicotine salts rather than freebase nicotine. Nicotine salt is a form that is absorbed in a way that feels smoother on the throat and delivers nicotine to the bloodstream more quickly, much like a cigarette does. That is why a 20mg/ml salt pod feels noticeably gentler than a 20mg/ml freebase liquid would. It also means that the strength number is not directly comparable between salt and freebase, so do not assume that what you used to vape in a refillable tank translates one-to-one.

As a rough guide to matching strength to your smoking habit:

• Heavy smokers (about 15 or more cigarettes a day, or the first cigarette within half an hour of waking): 20mg/ml is usually the strength that holds the line and stops you slipping back to cigarettes.
• Moderate smokers (roughly 10 to 15 a day): 20mg/ml may still be right, although some people settle better on 10 to 12mg/ml if it is offered.
• Light or social smokers (under about 10 a day): lower strengths of 10mg/ml or below are often enough, and 20mg/ml may feel too much.
• Non-smokers and never-smokers: nicotine is addictive and these products are not intended for you.

If your chosen pod only comes in a high strength and it feels too strong, you can reduce your intake by taking shorter, less frequent puffs. Signs that the strength is too high include dizziness, nausea, a racing heartbeat, sweating or a headache. If any of those happen, stop, sit down, sip some water and take a break. If you find yourself needing to vape constantly and never feeling satisfied, the opposite may be true and a higher strength could help.

Vaping products containing nicotine are for adults only, and in the UK you must be 18 or over to buy them. Anyone who is pregnant, has a heart condition or has other health concerns should speak to a doctor or pharmacist first.

Who the Hayati Pro Max Plus pod is for

A prefilled pod system is not for everybody, and being honest about that saves you money. Here is how to tell whether Blue Razz Lemonade suits you.

It is a good fit if you are:

• A smoker looking to switch: a draw-activated, mouth-to-lung pod with nicotine salts is the closest format to a cigarette, which is why it is popular with people trying to quit tobacco.
• A former disposable user: if you were buying single-use vapes before the June 2025 ban, a reusable base with replaceable pods gives you a very similar experience without the waste.
• Someone who wants no maintenance: there is nothing to fill, prime or clean. You insert the pod and vape.
• A fan of sweet-and-sour flavours: if you enjoy fizzy sweets, blue slush drinks or lemonade, the flavour will make sense to you straight away.
• Someone already on the Hayati Pro Max Plus base: in that case, this is simply a flavour option for a system you already know.

It is probably not the right choice if you are:

• A non-smoker or under 18: nicotine vaping is not for you, and sales to under-18s are illegal in the UK.
• A cloud chaser: if large vapour production is the point for you, a sub-ohm kit is the proper tool.
• Someone without a compatible base: the pod does nothing on its own, and you would need to buy the base first.
• A strong menthol or ice fan: this flavour has little cooling, so an ice or mint variety will suit you better.
• Anyone who likes to mix their own liquid: a sealed prefilled pod gives you no control over the recipe or the strength.
• A very light, occasional user: a pod that sits for months may lose punch, and a smaller, cheaper pod might make more sense.

If you are not sure where you fall, think about how you vape. If you want something close to a disposable but more responsible and often better value over time, you are in the target audience. If you enjoy tinkering with devices, you are not.

How to use the pod, step by step

Using the pod is straightforward, but a few small habits will help you get a cleaner flavour and a longer-lasting pod. Here is the full process, from opening the packaging to the final puff.

• Step 1, check the base is charged: if the battery is low, charge it first. A weak battery can cause weak vapour and a burnt taste because the coil is not heated properly.
• Step 2, unpack the pod: remove any wrapper or protective cap from the mouthpiece and the base of the pod. Check the seals are intact and that the liquid is not leaking.
• Step 3, seat the pod: line up the pod with the top of the base and push it down until it clicks into place. It should sit flush with no visible gap.
• Step 4, let the coil soak: wait about a minute, particularly if the pod has been in transit or storage. This allows the cotton to saturate and protects the mesh coil.
• Step 5, take a gentle first draw: start with a short, easy pull rather than a long one. This is a mouth-to-lung style, so draw into your mouth first, then inhale into your lungs.
• Step 6, find your rhythm: draws of two to four seconds with a short pause between are usually ideal. Avoid chain puffing, as the coil needs a moment to re-wet.
• Step 7, keep it upright when stored: store the base with the mouthpiece facing up so liquid does not pool towards the contacts.
• Step 8, replace when spent: when the flavour fades, the liquid window is nearly empty, or the vapour thins out, remove the pod by gently pulling it free and fit a fresh one.

A few additional tips. Wipe the pod contacts and the base contacts with a dry cloth now and then, because a little residue can interrupt the connection. Never use water or alcohol on the electrical contacts. Never try to refill a prefilled pod. They are not designed for it, and doing so risks leaks, poor coil performance and damage.

Finally, store spare pods in a cool, dry place away from direct sunlight, ideally in their original packaging, and use them within a sensible time frame. Check the best-before date on the pod label. A pod that has been stored well will taste fresher than one left in a warm bag for months.

Troubleshooting common problems

Most problems with pod systems are minor and can be fixed in under a minute. Here are the issues UK vapers run into most often, along with sensible remedies.

• No vapour or the pod will not fire: first check the pod is fully seated and clicks into place. Remove it, wipe the contacts with a dry cloth, and reinsert it. Make sure the base is charged. Because the device is draw-activated, also check the airflow inlet is not blocked by your finger or by lint.
• Weak or muted flavour: a new pod may need a minute to saturate. If the pod is nearly empty, the flavour will fade as the liquid runs out. It can also be vaper's tongue, where your palate gets used to a flavour. Try a different flavour for a day to reset.
• Burnt or harsh taste: this usually means the coil has dried out from chain puffing, or from continuing to vape an empty pod. If it persists after a rest, the pod is spent and should be replaced.
• Leaking or gurgling: a small amount of condensation is normal, but liquid pooling out of the pod is not. Causes include heat, pressure changes in luggage, or a damaged seal. Wipe it clean, keep the device upright, and replace the pod if it keeps weeping.
• Device will not charge: try a different USB-C cable and adapter, make sure the port is free of lint or debris, and check the indicator light. If it still will not charge after trying known good equipment, the base may be faulty.
• Battery flashing or cutting out: flashing usually signals a low battery, or a connection or short-circuit protection issue. Recharge, reseat the pod, and clean the contacts.
• Sticky or gummy mouthpiece: sweet liquids can leave a residue. Wipe the mouthpiece with a clean, dry cloth.
• Throat irritation: if it feels harsh, the strength may be too high, or you may be drawing too hard. Take softer puffs and check you are hydrated.

If you have tried the basic fixes and a brand new pod still does not work in a known good base, contact the retailer you bought from and describe the fault clearly, ideally with a photo. Do not attempt to open the pod or the base, since a lithium battery is inside the base and tampering with it is dangerous.

Value for money

Judging value on a pod system means looking beyond the price of a single pod. The relevant comparisons are against cigarettes, against single-use vapes, and against other reusable systems.

Against cigarettes the maths is clear. A pack of 20 in the UK costs well over ten pounds, and a pack-a-day smoker spends several hundred pounds a month. A pod rated for up to 4000 puffs, even at a conservative real-world figure, typically costs a small fraction of that per week. For a smoker who switches fully, the saving is large and quickly noticeable. That said, savings only materialise if you actually stop smoking rather than doing both.

Against single-use vapes, the situation has changed. Disposables are now banned for sale in the UK, so a comparison only makes sense against the reusable and refillable options that replaced them. Within that group, replacement pods avoid the repeated cost of a new battery with every purchase. You buy the base once, then spend only on pods. Over several months the pods-only spend is lower than repeatedly buying whole devices.

Against refillable open pod or tank systems, the cost picture is more mixed. A refillable kit with bottled e-liquid is usually the cheaper route per millilitre, because you are buying liquid in bulk without the cost of a built-in coil and plastic housing each time. The price of that saving is convenience: you must fill, prime, change coils and clean up the occasional spill.

Factors that influence value for you:

• Your usage: heavy users get through pods faster, so the cost per week rises.
• Multi-buy pricing: buying several pods at once usually lowers the per-pod cost.
• Flavour loyalty: if you stay with one flavour you like, you avoid wasting money on pods you end up not enjoying.
• Care of the base: a base that lasts a year or more spreads its cost across many pods.

In short, it is reasonable value for people who want convenience and a prefilled format, and it is not the cheapest way to vape. If minimum cost is your main goal, a refillable system will win, but you will do more work for it.

Honest comparison with other pod options

No single pod suits everyone, and it is only fair to set this one against the alternatives you are likely to be considering. These comparisons are general and based on the typical characteristics of each style, so check the specifics of any individual product before you buy.

• Against small closed pod kits such as Elfa-style 2ml pods: compact pods in the 2ml class are cheaper per pod, and the hardware is smaller and lighter. The trade-off is that you will replace them far more often, as they hold a fraction of the liquid. If you value pocket size and low upfront cost, they are attractive; if you hate changing pods, a 4000-puff pod makes more sense.
• Against other pod-style systems from the Lost Mary and Geek Bar families: these compete in much the same space, with mesh coils, USB-C charging and a large range of fruit flavours. The differences come down to flavour tuning, draw feel and which base you already own. If you have a Hayati base, staying with Hayati pods avoids buying a second device.
• Against refillable pod kits: a refillable kit gives you control over flavour and strength and is cheaper per millilitre, but needs bottles, filling, and occasional coil changes. A prefilled pod needs none of that.
• Against sub-ohm tanks: these produce larger vapour and a different, warmer draw, and they suit people who want to vape at lower nicotine in big volumes. They are not a like-for-like swap for a pod and take more learning.
• Against other Hayati flavours: if you like fruit but find blue raspberry too candy-like, a more natural fruit or a mint or ice blend from the same range may suit you better. The pod format, battery base and puff rating stay the same, so you can swap flavours easily.

The strengths of this pod are straightforward: a no-fuss format, a large rated puff count, a mesh coil that handles layered flavours well and a sweet-and-sour profile that stays pleasant over a long session. The limitations are equally plain. It needs a compatible base, it is not suited to cloud chasing, it gives you no control over nicotine strength or recipe, and prefilled plastic pods generate more waste than a refillable system. If those limits are acceptable, it does what it sets out to do.

Whatever you choose, recycle used pods and batteries through a retailer take-back scheme or a household waste recycling centre, and keep all vaping products out of reach of children and pets.