Pink Lemonade Hayati Pro Max Plus 4000 Replacement Pods

Overview

The Pink Lemonade Hayati Pro Max Plus 4000 Replacement Pods by Hayati in Pink Lemonade at 10mg and 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Hayati Pro Max Plus 4000 Pink Lemonade pods: what you are buying

These are replacement pods for the Hayati Pro Max Plus 4000 pod system, pre-filled with a Pink Lemonade nicotine salt e-liquid. You do not refill them, you do not drip onto a coil and you do not need to touch a bottle of juice. When the pod runs dry, you pull it out of the device, click in a fresh one and carry on. That one-step swap is the whole point of the pod-refill format, and it is why this product sits in its own category rather than alongside sealed single-use devices.

The 4000 in the name is the puff rating Hayati assigns to the product. Treat it as a manufacturer estimate rather than a promise. Puff counts are calculated under machine conditions with short, even draws, and real-world vaping is rarely that tidy. Most people find that a pod rated at 4000 puffs lasts from roughly one to two weeks of moderate use, and noticeably less if you take long, hard draws or chain vape through an evening.

Here is the short version of what the pack gives you:

• Format: sealed, pre-filled replacement pod for the Hayati Pro Max Plus device
• Flavour: Pink Lemonade, a sweet-tart lemonade with a soft pink-fruit note
• Puff rating: 4000 puffs (manufacturer figure)
• Coil: mesh coil built into the pod
• Nicotine: nicotine salt, with the strength shown on the variant you select, capped at 20mg/ml in the UK
• Needs: a compatible Hayati Pro Max Plus battery device, which is a separate purchase

This page walks through how the pod performs, what the flavour is actually like, how the coil and battery side works, how to choose a nicotine strength, what to do when something goes wrong and how it stacks up on price against similar pod systems. We have tried to be straight about the limits as well as the strengths, because a pod that suits one vaper will be wrong for another.

One practical note before going further. Everything on this page assumes you are an adult who already smokes or vapes. Vaping products are for existing nicotine users who want an alternative to cigarettes, and they are not intended for under-18s or for people who have never used nicotine. We carry out age checks on orders, and we would rather lose a sale than make a wrong one.

Compatibility: what the pod fits and what you need alongside it

A replacement pod is only half of a vape. The pod holds the liquid and the coil, while the battery device supplies the power and the draw-activated firing. These Pink Lemonade pods are made for the Hayati Pro Max Plus 4000 device. If you already own one, you need nothing else. If you do not, you will need to buy the starter kit that includes the device first, then come back to this listing for refills.

It is worth being blunt about cross-compatibility, because it is the most common reason people order the wrong thing. Pods from different brands almost never fit each other. Even within one brand, the connection can differ between product lines, so a pod for an older Hayati device may not seat properly in a Pro Max Plus battery. Check the model name on your device before ordering. If it says Pro Max Plus, you are in the right place. If it says something else, look for the matching pod listing rather than forcing a fit.

Do not try to modify a pod to make it work in another device, and do not try to open a sealed pod to refill it. The pod is designed as a closed, tamper-resistant cartridge. Cutting it open voids any claim for faults, can damage the coil, and risks leaking e-liquid onto your hands and your battery contacts. If you want a refillable system, that is a different category of product altogether, and a refillable pod kit with separate bottled e-liquid will serve you better.

Some other compatibility points that catch people out:

• Old pods in new devices: if you have recently upgraded, check that your new battery matches the pod model, not just the brand
• Multiple flavours: any Pro Max Plus pod, whatever the flavour, fits the same device, so you can keep two or three flavours on hand and rotate them
• Pod contacts: the metal contacts at the base of the pod should be clean and dry when you fit it, since residue can cause a poor connection
• Packaging: keep the pod in its sealed wrapper until you are ready to use it, and store it upright in a cool, dry place

If you are unsure whether your existing device is the right one, send us a photo of the label on the base of the battery and we will confirm before you order.

Flavour profile: how Pink Lemonade actually tastes

Pink Lemonade is a flavour with a fairly clear idea of itself. Think of a cold glass of lemonade with a splash of red berry cordial stirred through it. The lead note is lemon: bright, slightly sharp and juicy rather than peel-bitter or perfume-like. Underneath that sits a soft pink fruit sweetness, which most people read as a mix of strawberry and raspberry rather than one specific berry. The two work together so the tartness never becomes harsh and the sweetness never turns syrupy.

On the inhale, the lemon arrives first and the sweet fruit follows a beat later. On the exhale you get a rounded, slightly sugary finish that lingers lightly on the tongue. It is not a menthol flavour, and we do not describe it as an ice or chilled profile. Some vapers pick up a faint freshness from the citrus, which is natural for lemon, but there is no deliberate cooling agent for the throat to notice in the way there would be in a menthol or ice pod.

A few things shape how the flavour comes across in practice:

• Draw style: a slow, gentle mouth-to-lung draw tends to bring out the sweetness, while a firmer draw pushes the lemon forward
• Temperature: a cold device straight from a delivery van or a cold pocket can taste thinner for the first few puffs, so let it come up to room temperature
• Pod age: flavour is usually at its most defined in the first third of the pod and settles into a smoother, slightly sweeter pattern as the liquid level drops
• Palate fatigue: sweet fruit flavours can mute after a day or two of constant use, so swapping to a different flavour for an afternoon often restores the taste

If you are new to citrus-berry blends, Pink Lemonade sits in the middle of the sweetness scale. It is sweeter than a straight lemon or lime pod and lighter than a dessert or candy flavour. Vapers coming off sharp menthol often find it an easy step because the tartness gives a bit of bite without any cooling. Vapers who like heavy dessert flavours may find it too light and fresh.

As with any flavour, taste is personal. If you have a specific favourite, such as a lemon sherbet or a strawberry lemonade, you can use it as a rough reference point: Pink Lemonade is closer to the strawberry-lemonade end than to the sherbet end, with less sour and more rounded fruit.

Performance and puff delivery

Performance with a pod system comes down to three things: how quickly the coil responds when you draw, how consistent the vapour and flavour are from the first puff to the last and how long the pod lasts. The Pro Max Plus 4000 pod is built around a mesh coil and a draw-activated battery, so there is no button to press. You inhale and the device fires.

In use, the first thing most people notice is that the response is quick and the vapour is smooth rather than harsh. Nicotine salt formulations are designed to deliver nicotine with less throat scratch than older freebase liquids, which is why they suit pod devices where the power output is modest. The hit is steady and moderate at the 20mg/ml ceiling that UK law allows, and softer at lower strengths.

On the subject of the 4000 puff figure, it helps to understand what that number is and is not:

• It is a rating, not a counter. The device does not count puffs. The number comes from the manufacturer's testing under standardised, short-draw conditions.
• Your real count will vary. Long draws, frequent use and high ambient temperatures all drain a pod faster than the rating suggests.
• The end is gradual. As the liquid runs low, the flavour thins and the vapour becomes warmer before the pod stops producing. That is your cue to change it.

For a vaper replacing a pack of cigarettes a day with a nicotine-salt pod, a rough planning figure is a pod every seven to ten days. Lighter users, who vape a few times an hour or only socially, may stretch a pod to two weeks or more. Heavy users who take long draws all day may get through one in four or five days. Track your own first pod and you will know your pattern for every one after.

Consistency is where mesh coils tend to earn their keep. Because the mesh has a large surface area, it heats evenly and resists the drop-off in flavour that older wire coils show as they age. You should expect the last quarter of the pod to taste broadly like the first, with the exception of the final few dozen puffs when the liquid is almost gone.

Finally, do not judge a pod by its first two or three puffs. A new pod needs a short priming period, covered in the how-to-use section below, to let the liquid saturate the mesh. Skipping that step is the single most common cause of a weak or burnt first impression.

Design and build quality of the pod

A pod is a small piece of engineering, and the details matter more than the size suggests. The Pro Max Plus pod is a compact, sealed cartridge with a moulded plastic body, a transparent or semi-transparent window so you can see the liquid level, a mouthpiece at the top and a set of electrical contacts at the base. The coil sits inside, between the liquid reservoir and the airflow channel.

Here is what to look at when you open the pack, and what good looks like:

• Seal: the pod should be intact, with no visible cracks and no liquid on the outside of the body or on the contacts
• Mouthpiece: a smooth, rounded finish without sharp mould lines, which makes a difference over many hours of use
• Window: clear enough to judge the remaining liquid at a glance, so you are never surprised when it runs out
• Contacts: clean, bright metal at the base with no discolouration, since this is where power transfers from battery to coil

The pod is designed to click into the battery device with a firm, positive seat. If it feels loose or wobbles, remove it, check the contacts for dust or residue and refit it. A properly seated pod should not rotate or slide, and you should not need to force it.

On materials, pods in this class are typically made from food-grade or vaping-grade plastics, with a stainless or nickel-based mesh element inside. We cannot test every batch for you, which is one reason we encourage customers to check each pod on arrival and report problems quickly. A leak or a cracked body found on day one is easy to resolve. One discovered after a fortnight of use is harder to assess.

It is worth saying plainly that these are not premium, metal-bodied devices, and they are not meant to be. The design goal is a pod that is light, pocketable, affordable and easy to swap. The trade-off is that it is plastic and it will not take rough treatment. Do not carry loose pods in a pocket with keys or coins, avoid leaving them in a hot car, and keep the mouthpiece covered if the pack came with a cap. A little care keeps leaks and weak flavour at bay.

Hayati as a brand has built its range around fruit-forward flavours and straightforward, no-fuss hardware. This pod follows that approach: simple to use, easy to read and not trying to impress with features it does not need.

Battery and charging on the Pro Max Plus device

The pod itself contains no battery. All the power comes from the Pro Max Plus battery device it clicks into, so the way you charge and look after that device has a direct effect on how the pod performs. Devices in this class normally carry a built-in rechargeable lithium-ion cell in the region of 500 to 650mAh, charged through a USB-C port. The exact figure is printed on the device packaging, and you should treat that as the reference for your unit.

That capacity is chosen to match the pod. A modest cell is enough to heat a mesh coil through one pod and some way into the next, and it keeps the device small and light. In real use, most vapers find a single charge lasts about a day of moderate use, and a top-up while you do something else is quick.

Some simple charging habits will protect the battery and the pod:

• Use a standard USB-C cable and a normal phone-style charger. There is no need for a fast charger, and a basic 5V source is the safest choice.
• Do not charge unattended overnight on soft surfaces. Place the device on a hard, non-flammable surface while it charges, away from bedding and curtains.
• Stop when it is full. A charge indicator light normally changes colour or switches off when charging is complete. Unplug at that point rather than leaving it connected for days.
• Keep the contacts clean. Wipe the pod connector on the battery with a dry cotton bud now and then. Condensation and e-liquid residue are common causes of an apparent battery fault.

Take care with temperature too. Lithium cells do not like extremes. Leaving the device on a sunny windowsill or in a freezing car will shorten its life and can cause the pod to leak. If the device has been somewhere very cold, let it reach room temperature before you charge or use it.

If the battery seems to drain far faster than it used to, the usual explanations are ordinary: a worn cell after several months of daily use, a dirty connection or very frequent long draws. A new pod does not fix a tired battery, and a new battery does not fix a leaking pod. Work out which half of the pair is the problem before you spend money on either.

Finally, never use a damaged device. If the casing is cracked, the USB port is bent, or the unit gets unusually hot while charging, stop using it, unplug it and contact us or the manufacturer. A faulty lithium cell is not something to gamble on.

Mesh coil technology and why it matters

The coil is the part of a pod that does the work. It is a small heating element wrapped around or pressed against an absorbent wick. When you draw, the battery sends current through the coil, the coil heats up, and the heat turns a tiny amount of e-liquid into vapour. How the coil is built decides how that vapour feels and tastes.

This pod uses a mesh coil rather than a traditional round-wire coil. Instead of a wire wrapped in a spiral, a mesh coil is a thin sheet of metal with a fine grid pattern, laid against the wick. That sheet has a much larger heating surface than a wire of the same size, and the difference shows up in four practical ways:

• Faster ramp-up: the mesh reaches working temperature quickly, so the vapour starts as soon as you draw rather than a moment later
• More even heating: because heat is spread across the surface, the liquid is vaporised more evenly, which supports consistent flavour
• Fewer hot spots: wire coils can develop a hot spot that scorches the wick, while mesh is less prone to this at the power levels used in pod devices
• Smoother vapour: the vapour tends to feel cooler and less dense in the throat, which suits a salt nicotine formula

None of this makes mesh coils magic. A mesh coil still depends on a properly saturated wick and a stable power supply. If the wick is dry, any coil will burn. If the liquid level is very low, the coil is exposed and will give a harsh, hot puff. That is why the guidance on priming and on retiring a pod once the liquid is nearly gone matters so much.

The mesh in a sealed pod is not serviceable. You cannot replace the coil separately, clean it or rewick it, and the coil's life is tied to the liquid in the pod. In a well-matched pod, the coil should last roughly as long as the liquid does, which is the intention behind the design. This is also why the pod is a consumable you replace as a whole.

For comparison, wire-coil pods are typically a little slower to respond and may give a warmer, more concentrated hit. Many vapers like that. Others prefer the instant, even response of mesh. If you have used both, this pod will feel closer to the mesh pods from other brands than to the older wire cartridges.

Nicotine strength guidance for UK vapers

Nicotine strength is the single most important choice you make with a pod, and it is worth getting right the first time. In the UK, e-liquids sold as consumer vape products are capped at 20mg/ml of nicotine, often written as 2%. You will not find a legal consumer pod in the UK with a higher figure, so if you see a listing claiming one, treat it with suspicion.

Choose the strength shown on the variant selector for this listing. Where more than one is available, the following rough guide may help:

• 20mg/ml (2%): usually suited to people leaving regular smoking, especially anyone who has been smoking ten or more cigarettes a day. It gives a firm throat hit and a satisfying nicotine delivery, which helps cravings stay under control.
• 10mg to 12mg/ml (1% to 1.2%): a middle option for lighter smokers, social smokers or people who have already started to step down
• 5mg to 6mg/ml (0.5% to 0.6%): a gentle level for those close to finishing, or for vapers who find the higher strengths too strong
• 0mg/ml: nicotine-free, for anyone who has quit nicotine completely and wants to keep the vaping habit and the flavour

If you are not sure, start by thinking about what you currently use. Someone on a pack a day will typically find that a lower strength leaves them reaching for the device constantly, and then going through pods faster than they expected. A strength that is too high, on the other hand, can feel harsh, cause dizziness and nausea and make you cough. Symptoms of taking in too much nicotine include light-headedness, sweating, a racing heart and a headache. If you feel any of these, stop, take a drink of water and get some fresh air.

A key point about nicotine salts is that they feel smoother than freebase nicotine at the same number. A 20mg salt pod can feel gentler on the throat than a 20mg freebase liquid, but the nicotine content is still the same, and your body absorbs it quickly. Do not assume a smooth hit means a light dose.

Over time, many vapers step down gradually. They begin at 20mg, move to 10mg after a few weeks and then go lower. There is no hurry. The goal is to stop smoking, and the right strength is the one that stops you going back to cigarettes. If you want advice tailored to you, your pharmacist or local stop-smoking service can help, and many offer free support.

Who this pod is for, and who should look elsewhere

No pod suits everyone, and being clear about the fit saves you money. Here is who tends to be happiest with the Hayati Pro Max Plus Pink Lemonade pods.

• Adult smokers moving to vaping. The draw-activated, no-button design is close to the simplicity of a cigarette, and a 20mg salt pod gives a familiar throat hit.
• Existing Pro Max Plus owners. If you already have the device, replacement pods are the cheapest way to keep it running.
• Fruit-flavour fans. Anyone who likes lemonade, berry or soft citrus profiles will find this one straightforward.
• People who want low maintenance. No coils to change, no bottles to carry and no liquid to spill.
• Vapers who like to rotate flavours. Because pods fit the same battery, you can keep a few flavours and swap as your mood changes.

On the other side, here is who should consider a different product.

• Non-smokers and under-18s. Vapes are not for you. Nicotine is addictive, and there is no benefit in starting.
• Vapers who want maximum customisation. If you enjoy mixing your own liquids, adjusting wattage or fitting different coils, a refillable pod or tank system will give you more control.
• Anyone who wants a big cloud. This is a modest-power pod system aimed at a tight, flavourful draw, not a high-output device for large vapour production.
• Those who dislike sweet or fruity flavours. If you prefer tobacco, coffee or sharp menthol, choose a pod in that style.
• People with health conditions that nicotine can aggravate. Pregnant or breastfeeding women, and anyone with a heart condition or on certain medicines, should talk to a GP or pharmacist first.

It is also worth being honest about expectations. A pod like this is a tool for swapping cigarettes for something with fewer harmful substances in the vapour, not a risk-free product. The UK health bodies' position is that vaping is much less harmful than smoking for adult smokers, but not harmless, and it should not be taken up by people who do not already smoke.

If you are in two minds, a good approach is to order a single pod to try alongside your device, see how it fits your routine, and then stock up. Because the format is consistent across flavours, trying one will tell you most of what you need to know about the rest.

How to use: fitting, priming and the first few puffs

Getting started takes about a minute, and doing it properly prevents most early problems. The steps below apply to the Hayati Pro Max Plus battery device and a sealed replacement pod.

• Check the battery. Make sure the device has some charge. If the indicator is flashing or the device is cold and unresponsive, charge it first.
• Unwrap the pod. Remove any plastic film, caps or protective seals according to the pack instructions. Take care not to touch the base contacts with wet hands.
• Remove the old pod. Pull the empty pod straight out of the device. Do not twist or lever it with a tool.
• Fit the new pod. Line it up with the opening and push it in until it seats firmly. You should feel a positive click or snug fit.
• Prime the pod. Wait three to five minutes so the liquid can soak into the mesh and wick. This is the step most people skip and it matters.
• Take two or three gentle draws. Use short, soft puffs without inhaling deeply, which clears air from the system and finishes the saturation.
• Settle into your normal draw. From here, use whatever draw style you like. A slow, steady inhale of two to three seconds works well.

A few habits will help the pod last and keep the flavour intact. Take puffs with a pause between them rather than chaining, since back-to-back draws overheat the coil and burn through liquid. Keep the device upright when you are not using it, to avoid liquid pooling around the coil. Do not leave the pod fitted in a pocket with the mouthpiece pointing down for long periods.

When you notice the liquid level in the window getting low and the flavour thinning, change the pod. Vaping a pod to bone dry produces a hot, burnt taste and can damage the coil, and a burnt coil is not recoverable. It is better to swap a little early than to push on to the very end.

Store spare pods in their sealed wrapper, upright, in a cool, dry place away from direct sunlight, and well out of reach of children and pets. E-liquid containing nicotine is poisonous if swallowed or if it gets onto skin in quantity. If you do get e-liquid on your skin, wash it off with soap and water, and if any is swallowed or gets in the eyes, seek medical advice straight away.

Troubleshooting common pod problems

Most problems with pod systems have simple causes. Work through the likely ones in order before assuming a pod or device is faulty.

• No vapour, device does not respond. Check that the battery is charged and that the pod is fully seated. Remove the pod, wipe the contacts on both pod and battery with a dry cotton bud and refit it. If the device still does not fire, try a different pod to find out which half is at fault.
• Weak flavour from a new pod. Almost always a priming issue. Leave the pod to sit for five minutes, then take a few gentle draws. Also check that you are not drawing too fast, which can starve the wick.
• Burnt or harsh taste. This usually means the wick is dry or the pod is nearly empty. If the liquid level is still reasonable, rest the device for a few minutes and try again with slower puffs. If the level is low, replace the pod.
• Gurgling or spitting. Condensation or liquid in the airflow path. Remove the pod, blow gently through the mouthpiece to clear it and wipe any residue away.
• Leaking from the pod. Small amounts of condensation are normal. Liquid running down the outside of the pod is not. Check for a cracked body, wipe the pod and device dry, and avoid squeezing the pod. If the leak continues, stop using it and contact us.
• Device gets warm. Mild warmth during use is normal. Hot to the touch is not. Stop using it, let it cool and check for damage.
• Charging light behaves oddly. Try a different cable and a different power source. If the problem continues, the battery may be the fault and not the pod.

Where it makes sense, a quick elimination test saves time. If you have two pods and one device, swap them and see whether the problem follows the pod or stays with the device. If a pod fails in a second device, the pod is the culprit. If a different pod fails in your device, the device is.

For any issue you cannot solve, contact us with your order number and a photo or short description of the problem. We would rather help with a quick message than see a customer give up on a product that only needed cleaning contacts.

Finally, remember that opened and used e-liquid products cannot be returned for hygiene reasons unless they are faulty. That is the main reason it is worth testing a pod soon after delivery, while any manufacturing defect is still clearly a defect and not a case of wear.

Value for money, honest comparisons and UK rules

Price is where replacement pods earn their place. Once you own the Pro Max Plus device, each pod costs far less than buying a complete new unit, and you keep the battery rather than throwing it away. Compare that with the cost of cigarettes and the maths becomes clear. Even at a pod a week, the running cost is typically well under what a regular smoker spends in the same period, though your own numbers will depend on your usage and on current prices.

Here is how the pod format stacks up against the alternatives in fair terms:

• Against refillable pod kits: bottled e-liquid is cheaper per millilitre and gives more choice, but it needs more handling, and the coil still has to be replaced. A sealed pod is easier and cleaner, and costs more per puff.
• Against other sealed-pod systems: pods from similar brands in this class offer comparable mesh-coil performance. Differences come down to flavour tuning, battery size and price. If another brand's flavour suits you better, there is no reason to stay loyal.
• Against older wire-coil cartridges: mesh gives faster response and steadier flavour, though some vapers prefer the warmer hit of wire.
• Against a bigger mod or tank: more power and bigger clouds, but with more maintenance and more to learn. A pod system is a simpler starting point.

On UK rules, a few facts are worth knowing. Nicotine in consumer vape liquids is capped at 20mg/ml. Single-use vapes were banned for sale in the UK from June 2025, which is why reusable devices with replaceable pods have become the standard. A rechargeable device with a swap-in pod, like this one, is the legal alternative format. Sales are restricted to adults aged 18 and over, and we check age on orders.

Recycling matters. Used pods contain residual nicotine liquid, plastic and a metal coil, and should not go in your general rubbish. Drop used pods and old devices into the vape recycling bins that many retailers now provide, or take them to your local household waste recycling centre. Lithium batteries should always be recycled through proper collection points because of the fire risk in bin lorries and waste plants.

On the whole, this pod is good value if you already own the device and like fruit flavours, and it is a reasonable choice for a first pod system. It is not the cheapest way to vape, and it is not the most customisable. It is a well-judged middle option that is easy to live with.