Hayati Pro Max Plus 4000 Replacement Pods

Overview

The Hayati Pro Max Plus 4000 Replacement Pods by Hayati at 10mg and 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Hayati Pro Max Plus 4000 Replacement Pods: Overview

The Hayati Pro Max Plus 4000 Replacement Pods are pre-filled, swap-in pods made for the Hayati Pro Max Plus rechargeable device. Rather than throwing away an entire vape once the liquid runs out, you keep the device and clip in a fresh pod. For UK vapers that matters more than it used to: the sale of single-use vapes has been banned across the UK since 1 June 2025, so a rechargeable kit with replaceable pods is now the normal way to use a Hayati-style flavour range. This page explains what you are buying, how the pods perform, and whether they suit the way you vape.

The 4000 in the name is the manufacturer's rated puff count for a single pod. Treat it as a ceiling rather than a promise, because puff ratings are produced under controlled testing and real-world use is rarely as tidy. Hayati has built a following in the UK with bold, dessert-leaning and candy-leaning flavours, a soft throat hit at nicotine salt strengths, and a draw that sits between a tight mouth-to-lung pod and a loose, airy sub-ohm style. The Pro Max Plus pods continue in that direction, with a larger liquid reservoir than the pocket-sized entry-level pods that many people start on.

What you can expect to receive in a standard order:

• A pre-filled pod in the flavour you select, with the coil already built in, so there is nothing to prime, wick or assemble.
• Nicotine salt e-liquid at the strength listed on the product page. UK law caps nicotine at 20mg/ml (2%), and that cap applies to every vape sold here, not only to the old disposables.
• A sealed pod ready to push into the compatible Pro Max Plus device. The pod does not contain a battery; the device supplies the power.

One compatibility point is worth stating plainly before anything else. These pods are intended for the Pro Max Plus device. Pod shapes, contact points and airflow channels differ between product lines, even within the same brand, so do not assume a Pro Max Plus pod will seat or fire correctly in another Hayati kit or a third-party device. If you are unsure which device you own, compare the markings on the base of your device with the product listing, or contact our team before ordering.

The sections below cover performance, flavour, build quality, battery and charging on the device side, the coil, nicotine strength, who the pods suit, how to use them, troubleshooting, value for money and how they compare with similar pod systems. Where we are working from the manufacturer's stated figures rather than our own bench measurements, we say so, so you can weigh the numbers sensibly.

Performance and Puff Delivery

Performance with a pod system comes down to three things: how consistently the coil vaporises the liquid, how long the liquid lasts, and how the pod behaves as it empties. With the Hayati Pro Max Plus 4000 pods the stated rating is 4000 puffs per pod. A puff in that context is a standardised draw of a couple of seconds, and the number is calculated from the liquid volume and an assumed amount of vapour per puff. Your own result depends on draw length, how often you chain-vape, and the power setting if your device offers more than one.

In practical terms, here is a sensible way to think about longevity if a pod reaches its rating:

• Light use (around 100 puffs a day, mostly short draws): close to the full rated figure, which works out at roughly five to six weeks.
• Moderate use (150 to 250 puffs a day): roughly two to four weeks, and a little less if you take long, slow draws.
• Heavy use (300 puffs or more a day, long draws, frequent chain-vaping): around ten days to two weeks, with the final stretch being where flavour tends to flatten.

Vapour production on a mesh pod of this type is moderate to generous. It is not a cloud-chasing setup, and it is not meant to be, but you will notice a fuller, denser vapour than you get from the tight draw of the smallest pod kits. The vapour is warm rather than hot when the pod is full, and it stays that way for most of the pod's life. As the liquid level drops towards the bottom, the wicking has less to work with, so keep an eye on the level if your pod has a viewing window and avoid long, repeated draws when it is nearly empty.

Consistency from first puff to last is where a pre-filled pod either earns its keep or does not. The usual pattern with this style of pod is a strong, well-defined flavour for the bulk of the pod, followed by a gradual thinning in the last few hundred puffs. That is normal and it is the cue to swap in a fresh pod rather than push on. If you continue vaping a nearly empty pod, the coil can overheat and you will get a burnt, acrid taste that can also shorten the life of the replacement pod if the taste lingers in the airflow path.

Throat hit at 20mg/ml nicotine salt is smooth rather than harsh, with the nicotine delivery arriving quickly. Former smokers often describe that quick, rounded hit as the feature that makes the switch stick, because it takes the edge off cravings without the rasp of freebase nicotine at the same strength. If you find it too strong, the section on nicotine strength below explains how to adjust.

As a final note on performance, remember that a puff rating is a manufacturer's figure. We state it because it is the number printed on the product, not because we can promise every pod will hit it. Treat 4000 as the upper bound and plan on roughly 70 to 90 percent of it in mixed daily use.

Flavour Profile and Choosing a Variant

Hayati's reputation rests on flavour. The house style leans towards layered, sweet and fruit-forward profiles, often with a cooling finish, rather than the thin, single-note flavours of a basic budget pod. On this product page you choose from the available variants, and each pod carries its own sealed e-liquid, so the flavour you pick is the flavour you get from the first puff to the last.

Because we list the flavours as separate options, here is a framework for choosing between them:

• Fruit and berry blends: bright, juicy and sweet, usually with a slightly tart edge. These are the easiest flavours to vape all day because the sweetness is balanced by acidity.
• Ice and menthol-cooled options: the cooling agent adds a crisp, refreshing finish and a slightly stronger sensation in the throat. Good in summer and for people who find unadorned fruit cloying.
• Candy and sweet profiles: rounded, sugary and instantly recognisable. They are fun, but they can feel heavy after a few hundred puffs, so they suit people who like a distinct treat-style flavour rather than a background one.
• Dessert and cream-led blends: thicker, smoother and richer. They can coat the mouth more than a fruit flavour, so a sip of water between sessions helps keep the taste fresh.
• Tobacco and menthol-only styles: if listed, these are the closest to a cigarette routine and are popular with smokers who are new to vaping.

Mesh coil technology plays a large part in flavour delivery. Because the heating surface is wider and more even than a single round wire, the liquid is vaporised more consistently and the flavour has more definition. In plain terms, you taste the individual components of a blend rather than a generic sweetness. That is also why the flavour can feel intense in the first few puffs on a fresh pod and then settle slightly as the coil comes up to a stable working temperature.

If you are trying Hayati for the first time, a sensible approach is to start with one fruit-led flavour and one cooling flavour, then decide which family you prefer before buying in bulk. Flavour is subjective and a flavour that sounds appealing on the page may feel different in use, particularly at 20mg/ml where the nicotine itself contributes a little bitterness at the back of the throat. Cooling variants can mask that bitterness, which is one reason ice flavours are popular with people moving up from lower-strength products.

When you swap between flavours, the coil is part of the pod, so there is no flavour carry-over from the previous pod in the coil. A little residue can remain on the device's mouthpiece area or contacts, so a quick wipe with a dry cloth before fitting a different flavour keeps the first few puffs clean.

Pod Design and Build Quality

A replacement pod is a small, sealed component, and good build quality here means three things: a secure fit in the device, no leaks in transit or in your pocket, and an airflow path that stays clear. The Hayati Pro Max Plus pods are a push-fit design, so fitting involves aligning the pod with the opening in the device and pressing it home until it seats with a firm click or a solid resistance. They are not threaded and there is nothing to screw on, which keeps the swap quick and reduces the chance of over-tightening.

The pod body is moulded plastic, which is standard for pre-filled pods because it keeps weight down and lets manufacturers shape the airflow and liquid channels precisely. Pods in this class commonly include a window or translucent section so you can check the remaining liquid; check the listing images for the variant you choose. The mouthpiece is shaped for a comfortable lip fit and is part of the pod, so every fresh pod comes with a clean mouthpiece, which is a small hygiene benefit compared with a long-lived tank.

The pod is a pre-filled design and is not intended for refilling. There is no user-accessible fill port, and trying to force the pod open or inject liquid is a bad idea: it risks damaging the seal, wetting the coil unevenly and creating leaks inside the device. If you prefer to use your own e-liquid, a refillable pod kit is a better tool for that job, and we cover how the two approaches compare later on.

On receiving your order, give each pod a quick inspection:

• Check that the packaging and any tamper seal are intact.
• Look for cracks or visible damage to the pod body.
• Confirm there is no wet residue on the outside of the pod or inside the packaging.
• Check that the contacts on the pod are clean and free of liquid.

If anything looks wrong, do not use the pod and contact us with photos and your order number. Our returns section below explains what we can do.

For day-to-day handling, store spare pods upright in a cool, dry place and keep them away from direct sunlight and radiators. Heat can thin the liquid and push it past the wick, which is a common cause of leaking. Avoid carrying a loose pod in a pocket with coins or keys, as scratches to the contacts can cause intermittent firing. A small case or the original packaging is enough to keep them safe.

Finally, remember that the pod is a consumable. It is designed to be used and replaced, and the build is tuned for that purpose rather than for long-term refilling or cleaning. Once the liquid is finished, the pod should be recycled rather than reused.

Battery and Charging on the Pro Max Plus Device

The replacement pods contain no battery; power comes from the Pro Max Plus device they plug into. That makes this section really about the device, but it is worth covering because the battery decides how often you are tethered to a charger and how pleasant the pods are to live with.

The exact battery capacity depends on the device version you own, and we would rather point you to your device's packaging than quote a figure we cannot verify for your unit. As a rough guide, rechargeable pod devices of this size commonly carry a battery in the region of 500 to 800mAh. At the power levels used by mesh pods, a full charge of a battery in that class delivers somewhere in the low hundreds of puffs. Over the life of a single 4000-puff pod, you can therefore expect to charge the device many times, which is a normal part of life with any pod system.

Charging tips that make a real difference:

• Use the right cable and a sensible charger. Current devices charge over USB, typically via a USB-C port. A standard 5V phone charger or a computer USB port is fine; avoid unbranded fast chargers that push more power than the device is designed for.
• Do not charge unattended overnight. Lithium-ion cells are safe when treated properly, but any battery should be watched while it charges, and a charger left in a socket all night adds risk for no benefit.
• Charge at room temperature. Do not charge a device that is very hot or very cold, and never leave it charging in a car or on a radiator.
• Top up little and often. Lithium-ion batteries last longer if they are not run to zero every time. Charging when the indicator warns you is better than waiting for the device to cut out.
• Check the cable. A frayed or loose cable can cause intermittent charging or heat build-up. Replace damaged cables rather than taping them up.

Most devices in this class show charging status with an LED, and many use a short flash pattern to warn that the battery is low or that the pod is not making proper contact. Because the pod contacts are on the pod itself, a fresh pod gives a clean electrical connection each time, which is one of the practical advantages of replacing the pod rather than running one coil for months.

If the battery seems to drain quickly, it is worth ruling out a few common causes before blaming the device: a pod that is not fully seated, a blocked airflow path that makes the device fire for longer than needed, or cold weather, which temporarily reduces battery output. If the device is more than a year old and used daily, battery capacity will have dropped naturally, as it does with any rechargeable product. For battery safety and disposal, never throw a vape device into household rubbish or general recycling. Take it to a drop-off point as described in the value and recycling section below.

Mesh Coil Technology and Airflow

The coil is the working heart of any pod, and the Hayati Pro Max Plus pods use a mesh-style coil. A mesh coil is built from a thin sheet of metal mesh rather than a single round wire wound into a spiral. The sheet is pressed against an absorbent wick, and when current passes through it, the whole surface heats at once.

Compared with a conventional round-wire coil, the practical differences are:

• More even heating. The large surface area reduces hot spots, which means fewer scorched notes and a more accurate flavour.
• Faster ramp-up. The mesh warms quickly, so the first puff of a session is rarely thin or weak.
• More vapour for the power. Spreading the heat across a wide area lets the coil vaporise more liquid per puff at a given wattage.
• Better liquid contact. The mesh sits flush against the wick, so liquid is drawn through steadily, which supports longer pod life with a consistent flavour.

Mesh coils are usually lower in resistance than the coils used in the smallest pod kits, commonly under one ohm for this kind of design. We do not quote an exact figure for this pod because manufacturers do not always publish it and it can vary between production batches. What matters in use is the combination of coil, device output and airflow, and Hayati has tuned that combination for a draw that feels relaxed rather than restrictive.

Airflow on pods of this type is fixed, meaning there is no adjustable airflow ring. The airflow channel runs through the pod and out to the mouthpiece, and it needs to stay clear for the pod to behave. Keep the air inlet free of lint, dust and condensation, and do not block it with your fingers while vaping. If you find the draw tighter than you like, check that the pod is fully seated first; an unseated pod partly closes the inlet.

Mesh coils reward careful treatment in a few specific ways:

• Let a fresh pod rest. After fitting a new pod, wait around five minutes before the first draw. This lets the liquid soak into the wick and avoids a dry, burnt first puff.
• Take steady draws. Three to four seconds with a gap of 20 to 30 seconds between draws gives the wick time to refill.
• Avoid chain-vaping. Repeated draws without a pause drain the wick faster than it can resupply and are the single most common cause of a burnt taste.
• Do not fire an empty pod. Once the liquid is gone, replace the pod rather than getting a few more puffs out of it.

Because the coil is built into the pod and replaced with it, you never need to clean, re-wick or rebuild anything. That removes a lot of the maintenance burden associated with refillable systems, and it is a major reason pre-filled pods remain popular with people who simply want a reliable vape.

Nicotine Strength Guidance

Choosing the right nicotine strength is the single most important decision when you buy a pod, because too little leaves you reaching for a cigarette and too much leaves you feeling unwell. In the UK, e-liquid nicotine is capped at 20mg/ml (2%), and that ceiling applies to all vapes, including the pods for the Hayati Pro Max Plus. Pods in this range are most commonly sold at 20mg/ml nicotine salt, though you should always check the strengths listed for the specific variant on the product page, because availability can differ between flavours.

Nicotine salt, as opposed to freebase nicotine, is formulated to be gentler on the throat at higher strengths, so 20mg/ml feels much smoother than the same number would in a traditional liquid. It is also absorbed fairly quickly, which is why it works well for people replacing cigarettes. A rough guide to matching strength to smoking history:

• 20mg/ml: usually suits people who smoke around 10 or more cigarettes a day, or who have their first cigarette within half an hour of waking. If you are switching completely from smoking, this is the strength most people start on, because underdosing is a common reason people drift back to cigarettes.
• 10 to 12mg/ml (if available): suits lighter or social smokers, or people who find 20mg too sharp. This is also a natural stepping stone for vapers who have been using higher strengths for a while and want to taper.
• 5 to 6mg/ml (if available): for very light users, or those close to stopping altogether.

Signs you may have too much nicotine include dizziness, nausea, a racing heart, headache, sweating or an unpleasant harshness in the throat. If you notice these, stop vaping, drink water and consider a lower strength next time. Signs you have too little include persistent cravings, irritability and a tendency to vape constantly without feeling satisfied.

Remember that puffing pattern changes the effective dose. Taking long, frequent draws on a 20mg/ml pod delivers significantly more nicotine than short, occasional ones. Many people find they naturally vape less once their nicotine needs are met, and some switch down a strength within a few weeks.

Nicotine is addictive. These products are for adult smokers and existing vapers, and they are not intended for anyone under 18 or for non-smokers. The NHS position is that vaping is substantially less harmful than smoking but is not risk-free, and that it is best used as a way to stop smoking rather than as a lifestyle habit. If you are pregnant, have a heart condition or take regular medication, speak to a healthcare professional before using nicotine products. Local NHS stop smoking services offer free support and can combine vaping with other methods if you want help quitting completely.

Who the Pods Are For, and Who Should Skip Them

No single vape suits everybody. The Hayati Pro Max Plus pods are well matched to a particular type of user, and it is more useful to tell you honestly where they fit than to claim they suit everyone.

These pods are a good fit if you:

• Are an adult smoker moving away from cigarettes and want a straightforward, low-maintenance way to do it.
• Previously used single-use vapes and want something with a similar ease of use now that they are no longer sold in the UK.
• Prefer a draw that is fuller and airier than the tight, cigarette-like pull of the smallest pod kits.
• Like bold, sweet or cooled flavours and want a wide choice without learning about e-liquid mixing.
• Do not want to refill, clean or rebuild anything, and are happy to swap a sealed pod when it runs out.
• Already own a compatible Pro Max Plus device and need replacements.

You may want to look elsewhere if you:

• Want to use your own e-liquid. These pods are pre-filled and not refillable. A refillable pod kit gives you control over flavour and nicotine strength.
• Want adjustable airflow or wattage. Fixed-airflow pods give a consistent experience but no tuning. Larger pod mods and sub-ohm kits are better for people who like to adjust.
• Are looking for a very cheap running cost. A refillable setup using bottled e-liquid is generally cheaper per millilitre, although it needs more upkeep.
• Do not own a compatible device. Replacement pods are not usable on their own. Make sure you have the right device before ordering.
• Are a non-smoker or under 18. Nicotine vapes are not for you. We verify age at checkout and on delivery, and it is illegal to sell nicotine vapes to anyone under 18 in the UK.
• Want a very long-lasting single purchase with minimal waste. Pre-filled pods generate plastic waste with every swap, which is a real environmental trade-off compared with a refillable pod or tank that is reused.

A final category worth mentioning is the person who is tapering off nicotine. Pods are fine for this, particularly if the variant you choose is available in a lower strength, but you will need to plan the step-down in advance. Because each pod has a fixed nicotine strength, you cannot dilute it as you can with a refillable kit.

How to Fit and Use the Pods

Fitting a replacement pod is quick, but a few habits make the experience smoother and help each pod last as long as it can. Follow these steps for a first-time installation:

• Check the device first. Make sure the device is switched off or idle, and that the pod opening and contacts are clean and dry. Wipe away any dust with a dry cloth.
• Remove the old pod, if there is one. Pull it out in a straight line rather than twisting, and dispose of it with your vape recycling rather than the general bin.
• Unpack the new pod. Remove any protective cap, seal or plug from the base and mouthpiece according to the packaging. Do not pierce or open the pod in any other way.
• Align and seat the pod. Line up the pod with the opening and press it in until it sits flush and feels secure. A pod that rocks or sits proud is not fully seated.
• Wait about five minutes. This gives the wick time to saturate. Skipping this step is the most common reason for a burnt first puff on a brand new pod.
• Take a gentle first draw. Most devices in this class fire when you inhale, so there is no button to hold. If your unit has a button, check your device instructions for the correct operation.

For everyday use, a few simple habits help. Draw slowly for three to four seconds and pause between puffs. Keep the device upright when you are not using it, as laying it flat for long periods can let liquid pool around the airflow channel. Do not leave the device in direct sunlight or a hot car, and keep it away from water. If liquid or condensation collects on the mouthpiece, wipe it with a dry tissue instead of blowing through it.

When you travel, put the device in a bag or case rather than loose in a pocket. Changes in cabin pressure can force liquid out of any pod, so on a flight it is a good idea to keep the pod in the device and carry it in your hand luggage, upright where possible. Vapes must not go in the hold, because lithium-ion batteries are a fire risk in checked baggage, and airlines require them in the cabin.

Keep pods and devices out of the reach of children and pets. Nicotine e-liquid is toxic if swallowed or if it gets onto skin in larger amounts, and a pod should be treated with the same caution as any other nicotine product. If liquid gets on your skin, wash it off with soap and water. If it gets in your eyes, rinse with plenty of clean water and seek medical advice if irritation persists.

Finally, remember that you are using a nicotine product. Vape in places where it is permitted, be mindful of people around you, and do not use the device while driving.

Troubleshooting Common Problems

Most problems with replacement pods have simple causes and quick fixes. Work through the likely issue before concluding that a pod is faulty.

• No vapour or the device does not fire. First check that the pod is fully seated and the contacts are clean. Remove the pod, wipe the contacts on the pod and device with a dry cloth, and re-insert it firmly. Then confirm the device battery is charged; a low-battery warning will prevent firing. If the device still does not respond with a fresh, correctly seated pod and a charged battery, the device itself may be at fault.
• Weak or muted flavour. This is often the sign that the pod is almost empty, or that the wick has not saturated after a fresh install. Give a new pod a few minutes to rest, and take slower, shorter draws. If the pod is near the end of its life, it is time to swap it. Heavy use of sweet flavours can also cause temporary taste fatigue, so a break or a switch to a cooling flavour can help.
• Burnt or acrid taste. This usually comes from chain-vaping, from firing an empty pod, or from skipping the rest period on a new pod. A pod that has tasted burnt rarely recovers, so replace it and adjust your pacing. Do not keep vaping through a burnt taste.
• Leaking. Small amounts of condensation around the mouthpiece are normal. Liquid pooling in the device or on the pod base is not. Check for cracks, make sure the pod is fully seated, and wipe the contacts dry. Heat and pressure changes are common causes, so avoid leaving pods in hot places. If a pod leaks persistently out of the packet, contact us.
• Gurgling or spitting. This suggests excess liquid in the airflow path. Remove the pod, tap the mouthpiece lightly on a tissue and give it a minute. Taking slower draws helps prevent it.
• Device flashes or shows an error. Flash patterns vary, but they typically point to a low battery, a short circuit or a poor pod connection. Re-seat the pod, clean the contacts and charge the device. If the fault continues, test with a second pod.
• Pod will not seat properly. Check that you are using a Pro Max Plus pod and not a pod from another product line. Make sure any protective cap has been removed. Do not force a pod in, as this can damage the contacts.
• Throat irritation or coughing. This may mean the nicotine strength is too high for you, or the draw is too forceful. Try slower, gentler draws, or consider a lower-strength option.

If you have worked through these steps and a new pod still fails to work in a known-good device, keep the packaging and contact us with your order number, the flavour and a short description of the fault. Photos of any leak or damage help us deal with the request quickly. Do not attempt to open the pod or the device, and never use a device that is hot, swollen, damaged or smells of burning.

Value for Money and Recycling

Working out value for a pod is easier than it looks. Take the pod price on this page and divide it by the rated puff count of 4000 to get a rated cost per puff. Then, because real-world use rarely matches the rating, divide the price by roughly 3000 to 3500 for a more realistic figure. That gives you a ballpark of what each puff actually costs you.

A few points help put the number in context:

• Compared with smoking. Even allowing for the cost of the device, the weekly spend on pods for a typical vaper is considerably lower than the cost of a pack of cigarettes a day, and the gap has widened as tobacco duty has risen. The exact saving depends on your usage and the strength you choose.
• Compared with the old disposables. A rechargeable device with replaceable pods spreads the cost of the battery and body across many pods, so it is cheaper over the long run than buying a whole new disposable each time. It is also legal to sell, which disposables no longer are.
• Compared with refillable pods. A refillable kit with bottled e-liquid will usually be cheaper per millilitre. In exchange, you pay in time and effort: refilling, replacing coils and cleaning. If convenience matters to you, the extra cost of pre-filled pods is the price of that convenience.
• Buying in multiples. If you vape daily, buying more than one pod at a time avoids running out unexpectedly and, where multi-buy pricing is shown on the page, can reduce the cost per pod.

Do not judge value on price alone. A pod that gives you consistent flavour and a satisfying hit that keeps you off cigarettes is worth more than a cheaper pod that you abandon after a week. Conversely, a pod you end up discarding half full because you dislike the flavour is poor value however low the headline price. If you are unsure, buy one or two flavours before committing to a larger quantity.

Environmental responsibility is part of the real cost of vaping, and the law is clear on it. Used vapes and pods should never go in household rubbish or general recycling, because they can contain residual e-liquid and, in the case of the device, a lithium-ion battery. Instead, use a designated drop-off point. Retailers who sell vapes are required to offer take-back for waste electrical equipment, and many household waste recycling centres have collection points for small electricals and vape waste. Check your local council's website or the retailer's scheme for the nearest option. Where possible, keep used pods in a small container until you have enough to take in one trip, and make sure any remaining liquid cannot leak.

Choosing a rechargeable device with replaceable pods is already a better environmental choice than a single-use vape, since the most energy-intensive and valuable parts are reused. Recycling the pods properly completes the picture.

How They Compare With Other Pod Systems

An honest comparison helps you decide whether these pods are the right tool for you. Here is how the Hayati Pro Max Plus replacement pods compare with the main alternatives available to UK vapers.

Against other pre-filled mesh pod systems. Several brands sell rechargeable devices with pre-filled pods, including the pod-style kits from Elf Bar, Lost Mary, and other mainstream names. The general concept is the same: a sealed pod, a built-in coil, nicotine salt and a simple draw-activated device. Differences come down to flavour range, pod capacity, device battery size and price. Hayati's selling points are its flavour style and the larger pod capacity suggested by the 4000-puff rating. The trade-off is that pods are specific to their own device, so you are tied to Hayati's pod supply once you buy the kit.

Against pocket-sized pod kits. The smallest pod kits are discreet and light, with a tight, cigarette-like draw. They are good for people who want a close match to the feel of smoking and who vape only occasionally. The Pro Max Plus pods give a fuller draw and more vapour, but they are larger and not as pocket-friendly.

Against refillable pod systems. Devices such as the Vaporesso XROS series, Oxva Xlim or Smok Novo lines are popular examples. Their advantages are clear:

• Lower running costs when using bottled e-liquid.
• Freedom to choose any flavour and nicotine strength, including lower strengths for tapering.
• Replaceable coils, which means less plastic waste per vape than a stream of sealed pods.
• Often adjustable airflow and, on some models, adjustable power.

Their disadvantages are equally clear: you need to learn to fill, prime and maintain the pod, there is a risk of leaks and mess, and coil changes are a regular chore. For people who want to grab a device and vape without thinking, a sealed pod is simpler.

Against larger pod mods and sub-ohm kits. These offer bigger clouds, more flavour intensity and more control, but they also demand more power, more liquid and more maintenance. They are better suited to experienced vapers who enjoy the hobby side of vaping than to someone replacing cigarettes with the least fuss.

Where the Hayati pods fall short. To be fair, the weaknesses are worth stating: the puff rating is optimistic, the pods cannot be refilled, they work only with the matching device, and each one adds to plastic waste. If any of those points is a deal-breaker, a refillable system is a better choice.

Where they do well. For an adult smoker who wants flavour variety, strong nicotine delivery at a smooth throat feel and almost no upkeep, the Pro Max Plus pods are a sensible, easy-to-use option, and the replaceable-pod format means the device keeps working long after the first pod is finished.