Blueberry Lost Mary BM600 Prefilled Pods

Overview

The Blueberry Lost Mary BM600 Prefilled Pods by Lost Mary delivers up to 600 puffs in Blueberry at 10mg and 20mg. Pick up the BUY 3 FOR £10 multibuy — free UK delivery over £20 and same-day dispatch on weekday orders before 4pm.

Overview of the Lost Mary BM600 Blueberry Prefilled Pods

The Lost Mary BM600 Prefilled Pods in Blueberry are replacement pods for the Lost Mary BM600 rechargeable pod device. Each pod arrives sealed and already filled with nicotine salt e-liquid, so there is nothing to pour, no bottle to carry and no coil to prime by hand. You push the pod into the battery section, take a draw, and the device does the rest. It is a straightforward format, and it is the reason prefilled pod systems have become a common landing spot for adult smokers and vapers who want something simple that still behaves like a proper device rather than a throwaway stick.

Lost Mary built its reputation on compact, colourful vapes with a strong flavour focus, and the BM600 line carries that approach into a refillable-battery format. The idea is easy to follow. The battery lasts and recharges over USB-C, while the pod is the consumable part. When a pod runs dry you swap in a new one instead of throwing away a whole device along with a lithium cell. That matters in the UK, where single-use disposable vapes were banned from sale in June 2025 and where pod systems now make up much of the sealed, no-fuss end of the market.

This listing is for the Blueberry pods specifically. You will need a compatible BM600 battery device to use them, so check you already own one or add one to your basket. The pods are not refillable and are not designed to be opened, and they are not a stand-alone vape on their own.

In this guide we go through what the pods actually deliver: realistic puff counts, what the Blueberry flavour tastes like, how the battery and mesh coil behave, how to choose a nicotine strength, who should look elsewhere, and how the pods compare with other UK pod systems. We have kept the claims measured. A rated figure of around 600 puffs is a manufacturer estimate, and your own use will push the real number up or down. Where something depends on how you vape, we say so.

• Format: prefilled, sealed pod for the Lost Mary BM600 device
• Flavour: Blueberry
• Rated puffs: around 600 per pod
• Nicotine: nicotine salt at the UK maximum of 20mg/ml
• Age: 18+ only, with age checks at sale and on delivery

Specifications at a glance

Before looking at how the pods feel in use, it helps to have the numbers in one place. The figures below reflect the BM600 platform as it is normally sold in the UK. Pod and device details can change slightly between production batches, so treat the list as a guide and check the packaging for the final word.

• Product type: prefilled replacement pod for a rechargeable pod device
• Flavour: Blueberry
• E-liquid capacity: 2ml per pod, which is the maximum pod size allowed for nicotine vaping products sold in the UK
• Nicotine type and strength: nicotine salt, 20mg/ml (2%), which is the UK legal maximum
• Rated puffs: around 600 per pod, based on the manufacturer figure
• Coil: integrated mesh coil inside the pod
• Battery (in the device): approximately 550mAh, rechargeable
• Charging: USB-C
• Activation: draw-activated, with no button to press
• Refillable: no, the pod is sealed and prefilled

Two details are worth pausing on. First, the 2ml capacity is not a marketing choice. UK rules cap the volume of a nicotine-containing refill pod or tank at 2ml, which is why you see the same capacity across Lost Mary, Elf Bar, SKE, Geek Bar and most other UK pod products. Second, the 20mg/ml strength is the highest legal option. Lower strengths exist elsewhere in the BM600 family and across other brands, and we cover how to choose between them later in this guide.

The 550mAh battery sits in the device rather than in the pod. That means each time you change a pod you are re-using the same battery and the same charging port. A battery of this size is modest compared with larger kits, but it is matched to a low-power, mouth-to-lung draw that does not ask much of the cell. In practice a single full charge of the battery commonly outlasts at least one pod, and often more, depending on how hard and how often you draw.

The mesh coil inside the pod is the part that turns liquid into vapour. Because it is built into the pod, you get a fresh coil every time you change pods. There is no coil to clean, no resistance to look up and no wicking cotton to prepare.

Performance and puff delivery

A rated 600 puffs is the headline figure on these pods, and it is a useful comparison number rather than a promise. Puff counts are derived by manufacturers from machine testing, usually with short, evenly spaced draws of fixed length. Human vaping is messier. Long draws, chain vaping and warm environments all drain a 2ml pod faster than the lab figure suggests. Short, sparing draws and occasional use stretch it further.

As a reasonable expectation, many users get somewhere between 450 and 700 puffs from a pod, with the typical daily vaper working through one pod in two to four days. A lighter user who vapes mostly in the evenings might make a pod last most of a week. A heavy user who treats the device as a constant companion could finish a pod in a day and a half. Those are ranges to plan around, not guarantees.

Delivery on the first few puffs is smooth. The mesh coil heats up quickly, so vapour arrives almost as soon as you draw, without the half-second lag that some older cotton coils had. The draw itself is a gentle mouth-to-lung pull with light-to-moderate resistance. It is not a tight, cigarette-style restriction, and it is not as airy as a sub-ohm tank. If you are coming from a conventional cigarette, the draw feels familiar enough to adapt to within a few minutes.

Throat hit at 20mg/ml nicotine salt is noticeable but not harsh. Nicotine salts are formulated to feel smoother than freebase nicotine at the same strength, which is why a 20mg salt can be easier on the throat than a 12mg freebase juice, even though it delivers nicotine more efficiently. If you have only used low-strength freebase before, expect a stronger, quicker hit from these pods and take your first few puffs gently.

Performance does dip towards the end of a pod. As the liquid level falls, you may notice vapour thinning and the flavour flattening a touch. That is the signal that the pod is nearly empty, and it is worth changing it at that point rather than pushing on, because a dry mesh coil produces a burnt taste that can linger.

• First puffs: quick vapour and full flavour
• Mid-pod: consistent delivery with steady throat hit
• Final stretch: thinner vapour, flatter taste, time to swap

Blueberry flavour profile and the wider range

Blueberry is one of the more approachable fruit flavours in the Lost Mary range, and it leans towards a ripe, juicy berry rather than a sharp or sour one. On the inhale you get a sweet, slightly jammy blueberry note, closer to the taste of fresh berries than to a candy or a cough sweet. On the exhale the sweetness settles and a subtle tartness comes through, which stops the flavour feeling cloying across a full pod.

There is no deliberate menthol or ice layer in a straight Blueberry pod, so the vapour is not cooling in the way that an ice variant would be. It tastes warm, round and fruity. If you prefer something with a cold finish, a berry-and-ice flavour elsewhere in the range will suit you better. If you want a clean, unfussy fruit taste that is easy to vape all day, plain Blueberry is a sensible pick.

Flavour intensity is moderate to strong at the start of a pod and stays steady through the first two thirds. The mesh coil is good at preserving flavour accuracy, so the berry note does not drift into a muddy blend as the coil warms up. Towards the end of the pod the sweetness can feel slightly stronger as the liquid level drops, which is normal for prefilled pods.

Lost Mary BM600 pods are made in a broad spread of flavours, and the available list shifts from time to time with stock and supplier changes. Flavours commonly seen across the range include:

• Blue Razz Lemonade: blue raspberry with a lemonade snap
• Blueberry Sour Raspberry: a berry mix with a tangy edge
• Strawberry Ice: sweet strawberry with a cooling finish
• Watermelon Ice: light, juicy melon with menthol
• Triple Mango: a rounded tropical mango blend
• Pink Lemonade: sweet and tart citrus
• Cherry Cola: fizzy cola with a cherry lift
• Cream Tobacco: a smoother tobacco-leaning option

If you buy Blueberry pods and later want to switch, you can swap flavours simply by buying a different pod. The battery device stays the same. Because the pods are sealed and individually coiled, there is little flavour ghosting from one pod to the next, although it is a good idea to take a few puffs and let the new coil settle before judging it.

Design and build quality

The BM600 design is pocket-friendly. The device is a slim, rounded shape that holds a pod at the top and a battery body below, and it sits comfortably in a closed hand. The pod is a small clear-and-coloured cartridge that shows a rough liquid level through its window, which is helpful because it lets you judge how much is left before you run out unexpectedly. The mouthpiece is a flattened oval with a soft-edged rim that is comfortable to hold between the lips.

The pod fits into the battery body with a push-fit connection, and it seats with a firm click. A good fit is important. If the pod is not fully seated, the contacts may not line up and the device will not fire, or it may fire intermittently. In normal use the connection is secure enough that the pod does not rattle or twist loose in a jacket pocket. The pod can be removed by pulling it straight out rather than twisting it.

Materials are mostly plastic on the pod and a plastic-and-coated finish on the battery section, which keeps the weight low. The result is a device that feels light rather than premium. It will not impress someone used to anodised metal mods, but it does the job and survives day-to-day carrying. If you tend to drop devices, keep it in a case or a separate pocket from keys and coins, because coated finishes pick up scuffs.

Air intake is handled by a small hole at the base of the pod area. It is worth keeping this clear of lint, which can happen in coat pockets, because a blocked airflow path leads to a tight draw and can cause the device to misfire. A quick wipe with a dry cloth is usually all it takes.

Leaking is the classic weak spot of any prefilled pod, and these are no exception if they are mistreated. Pods stored upside down, kept in a hot car or squeezed hard in a bag can seep a little e-liquid into the airflow or the battery contacts. Store the device upright where you can, keep it out of direct sunlight, and wipe the contacts dry if you notice moisture. Treated sensibly, the pods stay clean and dry in normal use.

• Weight: light enough for a jacket or trouser pocket
• Pod window: lets you check liquid level at a glance
• Connection: push-fit pod, firm click when seated
• Care point: keep air intake clear and the contacts dry

Battery and charging

The battery lives in the BM600 device, not in the pod, and it is rated at roughly 550mAh. That figure is modest on paper, but the power draw of a low-wattage mouth-to-lung pod is small, so the cell goes further than you might expect. For most people one full charge covers the better part of a pod and often a whole one, and many users recharge every day or two as a habit rather than because the battery is flat.

Charging is over USB-C, which means you can use the same cable as your phone, tablet or many wireless headphones. A standard 5V phone charger or a computer USB port is fine. You do not need a fast charger, and there is no benefit to using one because the battery draws only a small current. A full charge generally takes in the region of an hour to an hour and a half from a low state, depending on the charger and how depleted the battery is.

A few sensible habits will keep the battery healthy over time:

• Charge before it hits empty. Lithium cells prefer being topped up rather than run completely flat every time.
• Do not leave it charging unattended overnight on a soft surface. Place it on a hard, clear surface where it can shed heat.
• Use a decent cable and charger. Cheap, damaged or poorly made cables are the most common cause of charging faults.
• Keep the port dry and free of lint. A dirty USB-C port is a common reason a device seems not to charge.
• Avoid heat. Leaving the device on a car dashboard or radiator shortens battery life and risks leaking from the pod.

The device usually signals its battery state with an indicator light. A flashing light when you draw commonly means the battery is low, while a light that stays on during charging and turns off or changes when finished shows it is full. Exact behaviour can differ slightly between production runs, so if the pattern looks different from what you expect, run through the troubleshooting section further down.

Because the battery is rechargeable and reused across many pods, the environmental picture is better than it is for a single-use stick. A device that lasts for dozens of pods keeps lithium cells and circuit boards out of the waste stream for much longer. When the battery finally fails, it should not go in household bin bags. We cover safe disposal and recycling in the final section.

Coil and mesh technology

Inside every BM600 pod is an integrated mesh coil. Rather than a coiled wire wrapped around a wick, a mesh coil uses a flat, perforated metal sheet that heats across a wide surface area. In plain terms, the liquid is warmed more evenly, so the vapour is produced more consistently and the flavour comes through cleaner. Mesh coils also tend to reach working temperature faster than traditional round-wire coils, which explains the quick vapour on the first draw.

Because the coil is part of the pod, you never touch it. Each pod is sold with a matched coil and wick already soaked in e-liquid at the factory, which takes care of the usual beginner problems. You do not need to prime a coil, you do not need to know resistance values, and you cannot flood it by over-filling. When the pod is finished, you remove it and recycle it.

The trade-off with any integrated coil is lifespan. The coil lasts about as long as the e-liquid in the pod, and no longer. Sweet fruit flavours like Blueberry can leave a thin film of residue on the mesh over time, which slowly dulls the flavour towards the end of the pod. That is part of why pods are sold as single-use consumables rather than as long-term cartridges that you refill again and again. Trying to refill a sealed pod is not recommended and can damage the coil and create leaks. It can also expose you to unlabelled e-liquid of unknown strength.

A few practical coil tips help the pod last its full course:

• Take shorter puffs. Long, hard draws overheat the mesh and burn through liquid.
• Wait a few seconds between puffs when chain vaping. This lets the wick re-saturate and avoids dry hits.
• Do not draw on an empty pod. A dry coil burns, and the burnt taste can stick around even after you change pods.
• Stop when the flavour fades. Thin vapour is the sign that the wick is running low on liquid.

For the wattage-minded, these pods run at low fixed power, which is the key to why they feel smooth. There is no variable-wattage dial, no temperature control and nothing to adjust. The power is set at the factory for the pod and coil combination, so you get an identical experience from the first pod to the last.

Nicotine strength and UK rules

The Blueberry BM600 pods listed here contain nicotine salt at 20mg/ml, equal to 2%. That is the maximum strength permitted for vaping products sold in the UK, and it applies to disposable and prefilled pod products alike. You will sometimes see the same flavour sold elsewhere as 10mg or 0mg versions, but those are different listings, and what you receive depends on the exact product you choose. Always check the strength on the pod label when it arrives.

Choosing the right strength is a matter of matching what you were used to before. As a rough guide:

• Moving from a pack a day or more of cigarettes: 20mg/ml is the usual starting point, because it supplies nicotine quickly enough to take the edge off cravings.
• Moving from around ten cigarettes a day or fewer: 20mg/ml may still feel strong. A lower-strength pod, if available, could be more comfortable, or you can simply vape less often.
• Occasional or social smokers: a lower strength is generally a better fit, as 20mg salt can feel intense when you have little tolerance.
• Existing vapers on 10mg to 12mg freebase: a 20mg salt will deliver considerably more nicotine per puff than you are used to, so go slowly at first.

If you feel dizzy, queasy, hot or unusually jittery after vaping, you are probably taking in more nicotine than your body wants. Stop, rest, drink some water, and consider a lower strength next time. If you have never used nicotine, a nicotine product is not a good idea in the first place. Vapes are intended for adults who currently smoke or use nicotine, as a route away from tobacco.

On the wider rules, a few points are worth knowing as a UK buyer. Nicotine vapes may only be sold to people aged 18 or over, and reputable retailers check age at purchase and at delivery. Pod capacity for nicotine products is capped at 2ml. Nicotine strength is capped at 20mg/ml. Single-use disposable vapes were banned from sale in Great Britain in June 2025, which means a reusable device with replaceable pods, like the BM600, sits on the lawful side of that change. Rules continue to develop around flavours, packaging and display, so it is sensible to check current guidance from the UK government if you are unsure.

This guide is general information and not medical advice. If you are pregnant, have a heart condition or take regular medication, talk to a doctor or pharmacist before using any nicotine product. Smokers who want help quitting can also use NHS stop-smoking services.

Who it suits and who should skip it

These pods are built around simplicity, and the people who tend to be happiest with them are the ones who value that above everything else. If you want to vape without thinking about coils, juice bottles or settings, a prefilled pod format takes the effort away.

Good fit for:

• Adult smokers switching from cigarettes who want a nicotine hit that feels quick and familiar, with a mouth-to-lung draw similar to a cigarette.
• Former disposable users who liked the convenience but want to avoid throwing away a whole device with a battery every few days.
• Vapers who like fruit flavours and want a clean, uncomplicated blueberry taste.
• People who travel or commute and need something small, light and spill-free.
• Beginners who do not want to learn about resistance, wattage or wicking.

You might want to skip it if:

• You have never used nicotine. Nicotine is addictive, and a 20mg pod is not a sensible way to start.
• You are under 18. These products are strictly for adults.
• You want big clouds or a direct-to-lung draw. A low-power pod system is designed for a gentler experience, and a sub-ohm kit would suit you better.
• You want to mix your own e-liquid or tune your device. The pods are sealed and not meant to be refilled, so a refillable system is a better match.
• You prefer lower nicotine than 20mg. Make sure the listing you pick states the strength you want.
• You are very price-sensitive and heavy-use. Per-puff, a refillable tank with bottled e-liquid is usually cheaper over time.
• You dislike sweet flavours. A tobacco or menthol pod will be more satisfying.

In short, these pods are aimed at smokers and existing vapers who want a tidy, easy-to-use system with a fruit flavour. They are not aimed at curious non-smokers, and they are not the cheapest route for high-volume vapers, which is why the value section below includes a plain comparison with refillable alternatives.

How to fit, activate and use the pods

Setting up is quick, and you can be vaping within a minute of opening the pack. Follow these steps for a clean first start.

• Check your device battery. If it has been sitting unused, plug it in for a short top-up first so it does not cut out on your first few puffs.
• Remove the pod from its packaging. Take off any protective film, plastic cap or sticker on the mouthpiece and on the base of the pod. Check that the bottom contacts are clean and free of liquid.
• Push the pod into the device. Line it up so it sits straight, then press firmly until you feel it click into place. Do not twist.
• Wait a minute or so. A fresh pod benefits from a short rest so the e-liquid can saturate the wick fully. This avoids dry or burnt-tasting first puffs.
• Take a gentle first draw. The device is draw-activated, so there is no button. Simply inhale through the mouthpiece with a slow, steady pull of around two to three seconds.
• Vape in short puffs. Pause between puffs rather than chaining them. You will get better flavour and the pod will last longer.
• Change the pod when the flavour fades. Pull the empty pod straight out and fit a new one the same way.

A few additional notes help things go smoothly. Hold the device upright when you can, because this keeps the liquid sitting properly against the wick. Do not block the air intake with your fingers while you draw. If you are carrying the device in a bag, a case will stop the contacts getting dirty and the pod being squeezed.

When you swap pods, there is no need to clean the device in any elaborate way. A dry tissue or a cotton bud wiped over the metal contacts is plenty. Avoid using water or alcohol directly on the contacts.

Keep the device and spare pods away from children and pets. E-liquid containing nicotine can be harmful if swallowed or if it touches skin or eyes for a long time. If a pod leaks onto your skin, wash with soap and water. If anyone swallows e-liquid, seek medical advice immediately.

Troubleshooting common problems

Prefilled pod systems are generally trouble-free, but a handful of small issues come up now and then. Most can be fixed in under a minute.

• The device does not fire when you draw. Check the pod is fully seated by pulling it out and pushing it back in until it clicks. Check the battery is charged. Wipe the contacts on both the pod and the device with a dry cloth.
• A flashing light on every puff. This usually points to a low battery. Plug the device in with a USB-C cable and let it charge. If the light flashes and the device still will not fire after charging, try a different pod to rule out a faulty pod.
• A burnt or acrid taste. The pod may be running low or the coil may have dried out from chain vaping. Change the pod. Do not keep drawing on a burnt coil, as the taste does not improve.
• Thin vapour and weak flavour. This is the normal end-of-pod signal. A new pod should restore full performance.
• Gurgling or liquid in the mouthpiece. Excess liquid can collect after the device has been stored on its side or in warm conditions. Hold the device upright and take a gentle puff to clear it, or blow lightly through the mouthpiece with the pod fitted. If it continues, change the pod.
• Leaking from the base of the pod. Wipe the pod and device dry. Keep the device upright. Persistent leaking means the pod is faulty, so replace it and contact the retailer if the problem repeats.
• Tight draw. Check that the air intake is not blocked by lint and that the pod is seated properly.
• The device will not charge. Try a different cable and charger, check the USB-C port for lint and test it with a computer port. If it is still dead after this, it may be a battery fault.
• Device gets warm. A little warmth during heavy use is normal. If it becomes hot to the touch, stop using it, unplug it if it is charging, let it cool, and do not use it again if the heat repeats.

If a fault persists after these steps, stop using the device and contact the retailer. Do not try to open the battery section or the pod, and do not use a damaged device. Damaged lithium cells can be dangerous. For anything that looks swollen, smells odd or feels unusually hot, take it to a recycling point for batteries and avoid charging it again.

Value for money, alternatives and recycling

On a per-pod basis, a BM600 Blueberry pod gives you around 600 rated puffs for a modest outlay, and because the battery is reused, the running cost drops compared with buying a fresh device every time. For a typical user who goes through a pod every few days, the cost is easy to track and does not require a stockpile of bottles and spare coils. The convenience premium is real, though. Over a year, a refillable tank with bottled nicotine salt is cheaper per millilitre than any prefilled pod.

Here is how the BM600 stacks up against common alternatives in a fair comparison:

• Elf Bar pod kits: a close rival in the prefilled pod space with a similar size and a large flavour range. Draw and power are comparable, so the choice often comes down to which flavours you prefer and which pods are in stock.
• SKE Crystal and similar pod kits: also draw-activated and pocket-sized, with their own catalogue of flavours. Day-to-day experience is similar, and flavour preference is the main deciding factor.
• Vuse ePod and other closed-pod systems: more established in supermarkets and tobacconists, with a tighter draw and a narrower flavour range. They are often seen as closer to the cigarette experience, but the pod choice is usually more limited.
• Refillable pod kits such as Vaporesso XROS or OXVA Xlim: these cost more upfront and need bottled e-liquid, but they offer lower running costs, more flavour choice and adjustable airflow. They suit people ready to learn a little more about vaping.
• Sub-ohm tank kits: better for large clouds and a direct-to-lung draw but bulkier, and generally not the best match for a person coming straight from smoking.

The BM600 sits in the middle of this field. It is simpler than a refillable kit and more sustainable than a single-use stick. It does not have the adjustability of a refillable kit, and the flavour list is limited to what Lost Mary produces. If your priority is a sealed, no-fuss pod with a familiar fruit flavour, the value is fair. If your priority is the lowest cost per millilitre, look at refillable options.

Recycling and disposal. Used pods contain residual e-liquid and a small coil, and the battery device contains a lithium cell. None of these belong in household rubbish or general recycling. In the UK, vapes and their components fall under waste electrical and electronic equipment rules, and shops that sell vaping products are expected to take back used items. You can also use council recycling centres and designated WEEE drop-off points. Take empty pods and old devices to one of these, and never put a battery in a kerbside recycling bin, where it can start a fire in a collection vehicle. Looking after the environment starts with disposing of these items properly.