Berry Lemonade Mix Lab Salts 10mg

Overview

The Berry Lemonade Mix Lab Salts 10mg by Mix in Berry Lemonade at 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Overview: Mix Lab Salts 10mg Berry Lemonade

Mix Lab Salts 10mg Berry Lemonade is a nicotine salt e-liquid from the Mix brand, sold as a refill bottle rather than a ready-to-use device. The flavour pairs mixed berries with a tart, lightly sweetened lemonade note, and it is aimed at adult vapers who use pod kits or low-power mouth-to-lung (MTL) tanks. You pour it into a compatible refillable device; you do not vape from the bottle or from the box. If you have only ever used disposables, the how-to-use section further down walks through a first fill step by step.

The 10mg in the name is the nicotine strength: 10mg per millilitre, which is 1% by volume. Under UK rules (the Tobacco and Related Products Regulations 2016), nicotine e-liquid is capped at 20mg/ml and bottles are limited to 10ml, so 10mg sits at the midpoint of what is legal to sell. That 20mg/ml ceiling is the same one that applied to the single-use disposables sold in UK shops, which is why 20mg salts are the usual point of comparison. Since 1 June 2025 the sale of single-use disposable vapes has been banned in Great Britain, and refillable kits paired with bottles like this one have become the main route for people who want a similar, simple experience.

Nicotine salts differ from the freebase nicotine used in older-style liquids. They combine nicotine with an acid, commonly benzoic acid, which lowers the pH and makes the throat hit gentler at a given strength. Many vapers also find that salts deliver nicotine in a way that feels closer to smoking, which is why they are popular with people moving away from cigarettes. At 10mg/ml the effect is moderate rather than strong, which suits lighter smokers and people who are tapering down.

Here is a quick snapshot of the product:

• Product type: nicotine salt e-liquid refill, not a disposable vape
• Brand and range: Mix, Lab Salts range
• Flavour: mixed berries with a tart lemonade finish
• Nicotine strength: 10mg/ml (1%) nic salt
• Bottle size: 10ml, the maximum UK size for nicotine e-liquid (check the label for the exact fill)
• Suitable devices: pod kits and MTL tanks, roughly 8W to 20W
• PG/VG ratio: salt liquids of this type commonly use a balanced blend such as 50/50, so confirm the ratio printed on your bottle
• Age restriction: 18+ only; vaping is intended for adult smokers and is not risk-free

Where a figure below is an estimate rather than a number printed on the bottle, we say so. Vaping outcomes depend heavily on the device you pair the liquid with, so treat the ranges as a guide and check your kit's manual for its own limits.

Performance and puff delivery

A bottle of e-liquid does not carry a printed puff count the way a disposable does, because the number of puffs depends on your device, wattage, draw length and coil. It is still useful to have a rough figure, so here is how we reason about it. A typical 2ml refillable pod or tank (2ml is the legal maximum for refillable tanks sold in the UK) fitted with a standard MTL coil will often give somewhere in the region of 400 to 700 puffs per fill. A 10ml bottle holds five of those fills, which puts the bottle at roughly 2,000 to 3,500 puffs. That is an estimate, not a guarantee. Slow, gentle draws at low wattage sit at the generous end of the range, while hard, long draws on a hot setting use liquid much faster.

Nicotine delivery is the other half of performance. At 10mg/ml, a 10ml bottle contains about 100mg of nicotine in total, and each 2ml fill contains about 20mg. For comparison, a 20mg/ml salt delivers roughly twice the nicotine per puff in the same device. Many light-to-moderate smokers find 10mg satisfying in a pod kit because salts absorb efficiently, but someone coming off a 20-a-day habit may find it leaves cravings unaddressed and end up vaping far more often to compensate. The strength guidance section below goes into this in more detail.

Vapour production with this liquid is modest and dense rather than billowing. A balanced PG/VG ratio in a low-power MTL device produces a compact cloud, a smooth throat hit and a flavour that arrives early in the draw. If you are used to sub-ohm clouds, this is a different experience, closer to a cigarette in the way it feels in the mouth and chest. That is by design: nicotine salts are meant to be used at lower power, and running them hard wastes liquid, shortens coil life and makes the throat hit harsher rather than better.

Consistency over a bottle is generally good when the device is kept topped up and the coil is in decent condition. The usual performance dips are caused by the coil rather than the liquid. Sweet fruit flavours leave a thin residue on the coil over time, and as that builds up the flavour dulls and vapour thins out. If flavour fades noticeably after a week or two but the liquid level is fine, swap the coil or pod before assuming anything is wrong with the bottle.

• Estimated puffs per 2ml fill: about 400 to 700, depending on device and draw style
• Estimated puffs per 10ml bottle: about 2,000 to 3,500
• Total nicotine per bottle: about 100mg at 10mg/ml
• Recommended power range: roughly 8W to 20W, or whatever your pod kit sets automatically

Flavour profile: mixed berries with a tart lemonade finish

The name tells you the structure. Berry Lemonade is a two-part flavour: a sweet berry layer and a citrus-sour lemonade layer, and the way they sit relative to each other changes through the draw. On the inhale you can expect the berry to lead, with a rounded, jammy sweetness rather than a sharp or sour fruit note. As the vapour passes over the tongue, the lemon begins to come through with a mild tartness, the kind you get from a cold fizzy lemonade without the fizz. The exhale tends to be where the lemon is most obvious, leaving a slightly sherbet-like tang that clears quickly.

Mix does not break the berry element down into named fruits in the product title, so we will not pretend to identify a specific one. Think of it as a general mixed-berry profile rather than a single recognisable fruit such as strawberry or blueberry on its own. If you like blends where no single fruit dominates, that ambiguity is a feature. If you prefer a clear, named fruit with a lemon accent, a single-fruit flavour in a similar range may suit you better.

Cooling is not part of the name, and this is not an ice flavour. That is worth saying because many UK fruit liquids add a menthol or cooling agent as standard. Here the freshness comes from the lemon rather than from menthol, so the chill on the exhale is gentle and the vapour feels closer to room temperature or slightly warm. Vapers who want an icy hit should look at the Mix Lab Salts 10mg Banana Ice in the same strength, or another cooled flavour.

How the flavour behaves depends on your setup in a few predictable ways:

• Lower wattage: the lemon is clearer and the berry stays soft and sweet
• Higher wattage: the sweetness intensifies and the lemon note flattens, and the vapour warms noticeably
• Fresh coil: the layers are distinct and the lemon finish is crisp
• Tired coil: everything blurs into a generic sweet taste, which is a sign the coil is due for replacement

Sweet and tart flavours can cause what vapers call vape fatigue, where your palate stops registering the flavour after a long session. If that happens, take a short break, drink some water, or alternate with a different flavour for a day. Lemonade-style profiles are usually easier on the palate over time than heavy dessert flavours, which is one reason fruit and citrus remain popular for all-day use. As always, flavour is subjective, so treat this description as a guide rather than a promise of what you will taste.

Bottle design and build quality

Because this is a refill rather than a device, build quality here means the bottle, its cap and its label. Nicotine e-liquid sold in the UK has to meet packaging requirements under the Tobacco and Related Products Regulations 2016, and a 10ml bottle like this one is made to those rules. Expect a plastic bottle with a narrow nozzle for controlled filling, a child-resistant cap and a tamper-evident seal that you break on first opening. The nozzle is designed to be leak-resistant when the cap is on, but any liquid bottle can drip if it is stored on its side or squeezed, so keep it upright.

The narrow nozzle matters more than it looks. Most pod kits have small fill ports, sometimes only a few millimetres across, and a wide nozzle will overspill or force you to fill by guesswork. A thin tip lets you aim the liquid into the port and control the flow, which cuts down on the sticky mess that tends to end up on kit housings and fingers. If your device has a particularly tight port, fill slowly and let air escape between squeezes.

The label carries the information you are legally entitled to see. Check it for the following before first use:

• Nicotine strength in mg/ml, which should read 10mg/ml for this product
• The ingredients list, including the nicotine salt component
• A health warning stating that the product contains nicotine, which is a highly addictive substance
• Batch number and best-before or expiry date
• Manufacturer or importer details for traceability

Plastic e-liquid bottles are lightweight and do not shatter if dropped, but they can be punctured or crushed in a bag. If you carry a bottle with you, keep it inside a sealed bag or a separate pocket of your bag, and avoid leaving it in a hot car, since heat can thin the liquid and push it past the nozzle. Store the bottle out of direct sunlight in a cool place, away from children and pets, because nicotine liquid is poisonous if swallowed or if it contacts skin or eyes in quantity.

When the bottle is empty, follow your local council guidance on small plastic bottles. Do not put a bottle that still contains liquid into recycling or the household bin; empty it into your device first, and let any residue dry out. Nicotine residue is a hazardous waste concern in large amounts, so if you are ever unsure, take the bottle to your household waste recycling centre rather than guessing.

Battery and charging: choosing the right device

This liquid has no battery of its own. Battery life and charging depend entirely on the device you use it in, so this section is about choosing a suitable kit and looking after it. For a 10mg nicotine salt, most users go for a pod kit or a small pen-style system. These typically carry an internal battery of roughly 400mAh to 1,000mAh. As a rough guide, a 400 to 600mAh battery covers a full day for a light vaper, while a 800 to 1,000mAh battery suits someone who vapes steadily through the day or who prefers a slightly higher output.

Charging is almost always by USB-C these days. A flat device usually takes somewhere between 30 and 90 minutes to charge, depending on battery size and charger. Use a standard 5V USB adapter or a computer port rather than a fast-charge brick unless the manufacturer says otherwise, and use the cable supplied or a reputable replacement. Do not leave a device charging unattended overnight, do not charge on a soft surface such as a bed or sofa where heat can build up, and stop using any device that gets unusually hot, swells, or smells of burning.

Some kits have a feature called draw activation, where the device fires when you inhale, while others use a button. Draw-activated kits are simpler and avoid the risk of a button being pressed in a pocket. Either way, battery health is influenced by the same few habits:

• Avoid running the battery to zero repeatedly; top up when convenient
• Keep contacts between pod and battery clean and dry
• Do not leave the kit in a hot place such as a car on a sunny day
• Replace any device with a damaged casing or a loose battery

When a device reaches the end of its life, do not put it in a household bin or kerbside recycling. Lithium-ion batteries can ignite when crushed in bin lorries and recycling plants, and this is a real fire risk across the UK. Instead, take used vapes and pod kits to a proper drop-off point. Shops that sell vapes are expected to take back waste vapes, and most household waste recycling centres run by local councils have a small electrical or battery bin. The Recycle Your Electricals postcode finder can show nearby drop-off points. Remove the pod and empty any liquid first where you can, and do not try to take the battery out of a sealed device yourself.

Coil and mesh tech: what works with this liquid

Nicotine salt liquids work best with coils that heat gently and evenly at low power. The ideal coil for this bottle is a higher-resistance MTL coil, commonly in the range of around 0.8 to 1.2 ohm, running somewhere between 8W and 20W. These coils draw liquid slowly, produce moderate vapour, and let the flavour settle on the tongue rather than blasting past it. Many pod kits ship with a coil in this range, and you may not need to change anything beyond choosing a pod and filling it.

You will come across three main coil types:

• Standard wire coils: a coil of resistance wire wrapped around a cotton wick. Simple, inexpensive and widely available, with solid flavour at low power.
• Mesh coils: a flat sheet of fine mesh in place of a wire wrap. The larger heating surface warms the liquid more evenly and tends to give a fuller, more consistent flavour with less chance of hot spots.
• Ceramic coils: a porous ceramic wick with a heating element built in. These are common in sealed pod systems and offer clean flavour, though they can be sensitive to being run dry.

For a sweet and tart fruit liquid, mesh and quality wire coils are both sensible. Mesh gives slightly better layering of the berry and lemon notes at the same wattage, but it is not a requirement. What matters more is that the coil resistance and your device settings match the liquid. A very low-resistance coil designed for sub-ohm vaping will pull a large amount of liquid at high power, and with a nic salt that means a large nicotine dose, a harsh throat hit and a bottle that empties at an alarming rate. If you want a bigger cloud, a nicotine salt at 10mg is probably not the right tool; a lower-strength freebase liquid in a sub-ohm device is a different category entirely.

Coil life with fruit and lemonade flavours is usually shorter than with plain tobacco or menthol liquids, because the sweeteners caramelise on the coil. A reasonable expectation is somewhere between one and three weeks of regular use per coil, or two to four pod fills, though this is an estimate and varies with how you vape. Signs that a coil is ready to be replaced include a burnt or flat taste, reduced vapour, a gurgling sound, and a harsher throat hit than usual.

Always prime a new coil before use. Fill the pod, wait for five to ten minutes so the cotton or ceramic wick can saturate, and take a few gentle draws without firing the device if your kit allows. Skipping this step is the single most common cause of a burnt first taste, and it can ruin a fresh coil within a few puffs.

Nicotine strength guidance: is 10mg right for you?

Choosing a strength is the decision that most affects whether switching works for you, so it is worth getting right. As a general guide used by many UK vape shops, nicotine salts are chosen roughly like this. These are rules of thumb, not medical advice, and everyone's tolerance and habit is different.

• 20mg/ml: typically for heavier smokers, for example people on around 15 to 20 or more cigarettes a day, or those who need a strong hit to stay off cigarettes
• 10mg/ml: typically for light-to-moderate smokers, roughly up to 10 to 15 cigarettes a day, or for people stepping down from 20mg
• 5mg/ml and below: typically for very light smokers, for people close to quitting nicotine, or for those who find 10mg too strong

10mg is a sensible starting point if you smoke fewer than a pack a day, if you only smoke socially, or if you have previously used 20mg and found it harsh or too strong. It is also a common strength for someone who has already been vaping for a while and wants to cut down gradually. If you are a heavy smoker, you may find 10mg is not enough in the first week or two, and you might vape more often to chase the same relief. In that case it is more effective to move to a higher strength than to chain vape on a lower one.

Signs that 10mg may be too low for you:

• You still crave a cigarette soon after vaping
• You find yourself vaping constantly through the day
• Cravings return within 20 to 30 minutes of a session
• You return to smoking alongside vaping

Signs that it may be too high:

• A harsh feeling in the throat or chest
• Lightheadedness, nausea or a racing heart after a few puffs
• A headache or an unusual jittery feeling

If you get the second set of symptoms, stop and take a break. The device matters too: the same liquid at 10mg in a high-wattage device gives noticeably more nicotine per puff than in a low-wattage pod kit, because more liquid is vaporised with each draw. Start with gentle draws and low power, then adjust.

Vaping is intended for adult smokers who want to stop or cut down. It is not recommended for people who do not currently use nicotine, and nobody under 18 can legally buy it in the UK. If you are pregnant, have a heart condition, or are taking medication, speak to a pharmacist or GP before using any nicotine product. NHS stop smoking services offer free support and can help you choose a method that fits your situation.

Who this is for, and who should skip it

Mix Lab Salts 10mg Berry Lemonade is a practical fit for a fairly specific group of adults. It suits you if most of the following are true:

• You are an adult smoker or existing nicotine user looking for an alternative
• You smoke around ten cigarettes a day or fewer, or you are tapering down from a higher strength
• You own, or plan to buy, a refillable pod kit or a low-power MTL tank
• You prefer fruity, sweet-and-sour flavours to tobacco or menthol
• You want a smooth throat hit and moderate vapour rather than large clouds
• You like the lower cost per millilitre of bottled liquid compared with pre-filled pods

It is also a reasonable choice for former disposable users. Since single-use disposables were banned from sale in Great Britain on 1 June 2025, many people have moved to a rechargeable pod kit and a bottle of salt. A 10mg bottle is a gentler landing than a 20mg one if your old disposable was strong enough to leave you jittery, and you can step up to a 20mg bottle later if you find 10mg is not satisfying.

You should think twice or skip this product if any of these apply:

• You are under 18. It is illegal to sell nicotine products to anyone under 18 in the UK.
• You have never smoked or used nicotine. Nicotine is addictive, and there is no reason to start.
• You are pregnant or breastfeeding, or you have a heart condition, without medical advice first.
• You only own a sealed, non-refillable device. This is a bottle, and it will not work with devices that cannot be refilled.
• You want sub-ohm clouds. A high-power setup with a nicotine salt is a poor match and uses liquid quickly.
• You are a heavy smoker needing maximum nicotine. A 20mg strength may suit your needs better at the start.
• You dislike tart or sour flavours. The lemonade finish is noticeable, and a creamy or tobacco flavour would suit you better.

If you are not sure where you fit, the safest approach is to start with a low-power setup, take short gentle draws, and see how you feel over a few days. You can always move up a strength later, but you cannot take nicotine back once you have taken it. Our product pages list the other strengths and flavours in the range, so you can compare options before you order.

How to use: filling, priming and vaping

Using a bottled nicotine salt is simple once you have done it a couple of times. Follow these steps for a clean first fill, and always read your device's own instructions because filling points and pod designs vary.

• Check compatibility. Make sure your device is refillable and suitable for nicotine salts. Pre-filled sealed pods cannot be refilled.
• Wash and dry your hands. Nicotine liquid can be absorbed through skin, so wipe up any spills straight away.
• Turn the device off and remove the pod or tank. Work over a surface you do not mind wiping down.
• Open the fill port. Most pods have a silicone plug or a sliding cover. Lift it carefully.
• Remove the bottle cap and fill slowly. Aim the nozzle at the inside wall of the pod, not at the central tube, and squeeze gently so the liquid runs down the side.
• Stop below the maximum. Leave a few millimetres of air space at the top, and never fill past the marked line. Remember that 2ml is the UK maximum for refillable tanks.
• Close the port, wipe the pod and cap the bottle. Put the cap back on firmly and store the bottle upright.
• Let the pod rest. Wait five to ten minutes for the wick to soak up the liquid. A new coil needs the full ten.
• Reattach and start gently. Take a couple of short draws at low power, then settle into your normal rhythm.

For the vaping itself, use slow, steady mouth-to-lung draws of roughly two to three seconds, hold the vapour in your mouth briefly, then inhale into the lungs or exhale, depending on what feels comfortable. Pause for 20 to 30 seconds between draws so the coil can re-wet. Chain vaping, meaning back-to-back draws without a pause, is the quickest way to get a burnt taste and to take in more nicotine than you intended.

Top the pod up when the liquid drops to about a third full, rather than letting it run dry. Running a coil dry is the most common reason for dry hits and for a coil failing early. If you leave the device unused for a few days, store it upright in a cool place and give it a few gentle test draws before returning to normal use. Keep the bottle, the pods and the charger out of the reach of children and pets at all times.

Finally, if you switch from another flavour, rinse or replace the pod first. Mixing residue from a previous liquid with a fresh fill muddies the taste, and the lemon note in particular can be overpowered by a stronger leftover flavour. A fresh pod or coil for each new flavour keeps things clean.

Troubleshooting common problems

Most problems with bottled salts come from the coil, the fill or the device settings rather than the liquid itself. Here are the issues we hear about most often, with practical fixes.

• Burnt or acrid taste. Usually a dry or worn coil, or a coil that was not primed. Replace the pod or coil, prime it for ten minutes, and lower the power if your device allows it. Do not keep vaping through a burnt taste; it will not clear.
• Weak or muted flavour. Often coil gunk from sweetener build-up, or vape fatigue. Try a fresh coil first, then a break of a day or two from this flavour. Check the pod is not running low on liquid.
• Leaking from the pod or device. Overfilling, a loose fill-port plug, or a cracked pod can cause leaks. Wipe everything dry, check the seals, avoid filling to the very top, and store the kit upright. Changes in air pressure on flights or at altitude can also push liquid out, so keep devices upright and consider emptying the pod before travel.
• Gurgling sound or spitting. Excess liquid in the airway or condensation. Blow gently through the mouthpiece with the device off, or wipe the airway with a tissue, and avoid overfilling.
• Dry hits, with hot vapour and little flavour. The wick is not getting enough liquid. Check the level, let the pod soak, take slower draws, and pause between puffs. Dry hits damage coils, so replace the coil if the taste does not recover.
• Harsh throat hit. Power may be too high, or the strength too much for your tolerance. Turn the wattage down, take slower draws, or move to a lower nicotine strength.
• Nausea, dizziness or a racing heart. Signs of too much nicotine. Stop vaping, sit down, drink water and wait for it to pass. If symptoms are severe or do not ease, seek medical advice. Reduce your strength or take longer pauses between sessions next time.
• No vapour at all. Check the battery is charged, the pod is seated properly and the contacts are clean. If the liquid level is fine and the device still does not fire, the coil may have failed.
• Bottle hard to squeeze or dripping. A blocked nozzle or a warm bottle can cause dripping. Store it upright in a cool place and wipe the tip after each use.
• Cravings not satisfied. The strength may be too low for your habit, or the device may be delivering less than you expect. See the strength guidance section above before deciding to buy again.

If you have tried these fixes and something still seems wrong with the liquid itself, such as an unusual smell, separation, or a colour that looks different to previous bottles, stop using it and keep the bottle with its batch number. Contact customer service with your order details. A liquid that has been stored in warm conditions for a long time can darken slightly, which is normal for some flavourings, but if you are unsure, do not use it.

Value for money

The cost question for bottled liquid is best answered with simple arithmetic rather than a headline price, because prices change and multi-buy offers shift the figures. Divide the bottle price by 10 to get the cost per millilitre. As a purely illustrative example, a bottle priced at £4.00 works out at 40p per millilitre. If a 10ml bottle gives roughly 2,000 to 3,500 puffs, as estimated above, the liquid cost sits at about £1.15 to £2.00 per thousand puffs. Check the current price on the product page and apply the same sums.

Bottled liquid usually costs less per millilitre than pre-filled sealed pods, because you are not paying for packaging, a pre-built coil and a branded cartridge with every refill. The trade-off is that you buy and look after a refillable device, replace coils or pods from time to time, and handle the filling yourself. For most regular vapers the running cost over a few months comes out lower than a pre-filled pod system, although the saving depends on which pods you are comparing against.

The costs to factor into your overall budget are:

• The device: a refillable pod kit is a one-off purchase, and entry-level kits are usually modest in price
• Coils or pods: replaced every one to three weeks of regular use, and these are the main recurring cost beyond liquid
• Liquid: how fast you go through a bottle depends on your habit
• Spare batteries or chargers: occasional, if you want a backup

A worked example helps. If you use around 2ml of liquid per day, a 10ml bottle lasts about five days, and six bottles cover a month. If you are a lighter user at 1ml per day, a bottle lasts around ten days and you will need three bottles a month. These figures are estimates, and your own consumption will tell you more after the first bottle than any average. Keeping a note of how many days your first bottle lasts is the quickest way to plan your spend.

On quality for the price, a salt at 10mg in a 10ml bottle is a straightforward, mainstream format. You are not paying for a novelty feature, and what you get is a consistent nicotine salt in a flavour with a clear identity. Buying several bottles at once, when the shop offers a bundle deal, tends to lower the cost per bottle. Just make sure you can use them before their best-before date, and store spares in a cool, dark cupboard away from children.

Finally, factor in what you are replacing. Many people who switch from cigarettes find the monthly cost of vaping noticeably lower than what they were spending on tobacco, but that depends on your habit and local prices, so calculate it with your own numbers rather than relying on a generalisation.

How it compares with similar nic salt ranges

Mix Lab Salts sits in a crowded part of the UK market, where 10ml nicotine salt bottles from many brands compete on flavour, price and range size. Names you will commonly see alongside it include Elfliq, IVG Salts, Nasty Salt and Dinner Lady Salts. We are not going to claim this liquid beats any of them, because flavour is a matter of taste and we cannot guarantee how one person's palate will respond. What we can do is point out where the practical differences tend to lie.

• Flavour range: larger, long-established ranges offer many more flavours across fruit, dessert, menthol and tobacco. If you want to rotate through a dozen options, a bigger range gives you more to choose from. Mix Lab Salts is a smaller offering, so check how many flavours are listed on our site.
• Strength options: most 10ml salt ranges sell 10mg and 20mg, and some add 5mg or lower. This listing is a 10mg product; check the other strengths in the range if you may want to step up or down.
• Berry and lemonade flavours: berry-and-lemon blends are common, and you will find similar profiles from other brands. If you have a favourite already, compare the descriptions: some lean sweeter, others sharper, and some add cooling.
• Price: 10ml salts from different brands usually sit within a similar band, and promotions change often. Compare the cost per millilitre on the day, not the brand reputation.
• Brand recognition: the established names have wider reviews and community feedback. A smaller range has less public feedback, so you rely more on product descriptions and your own trial.

It is also worth comparing the format rather than just the brand. Against 20mg salts, this 10mg bottle gives a gentler hit and suits lighter use, but a heavy smoker may find it falls short. Against pre-filled sealed pod systems, bottled liquid costs less per millilitre but needs a refillable device and a bit of handling. Against freebase liquids in the 3mg to 6mg range, salts are smoother at higher strengths and suit low-power kits, whereas freebase works better in higher-power, larger-cloud devices. And against shortfill liquids with added nicotine shots, a 10ml salt is simpler, more portable and needs no mixing, but it offers less liquid per purchase.

The honest summary is that this is a straightforward, mainstream 10mg nic salt with a clear fruit-and-citrus identity. It is a good fit if the flavour appeals and 10mg is the right strength for you. If you want the widest choice of flavours, or a particular strength we do not list, look at larger ranges alongside it. Whichever you choose, buy from a reputable UK retailer, check the label on arrival, and keep your purchase within the legal limits of 10ml bottles and 20mg/ml strength.