Oxva Xlim Pro Pod Vape Kit

Overview

The Oxva Xlim Pro Pod Vape Kit by Oxva across 7 flavours at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Oxva Xlim Pro Pod Vape Kit overview

The Oxva Xlim Pro Pod Vape Kit is a refillable pod system aimed at adult smokers and existing vapers who want something pocketable but more adjustable than a basic starter pen. It belongs to the Xlim family from Oxva, a Shenzhen-based manufacturer whose pod devices have been stocked by UK vape shops for several years. The Xlim Pro keeps the slim, rounded-oval body the family is known for, then adds a bigger battery and a wider power range than the entry-level Xlim models, so one device can cover both a tight, cigarette-style draw and a looser, warmer lung inhale.

Because this is a kit rather than a disposable, the box contains the device and a pod, and you supply your own e-liquid. That one fact changes both the economics and the environmental footprint. You buy a single device that is meant to last months or years, replace the pod when the coil starts to fade, and pay for e-liquid by the bottle rather than by the throwaway unit. Since the UK ban on single-use vapes came into force in June 2025, refillable kits like this one have become the straightforward route for people who liked the convenience of a disposable but want something legal, repairable in the sense of replaceable parts, and cheaper to run.

Here is the short version of what the kit offers:

• Battery: built-in rechargeable cell, published by Oxva at around 1000mAh, charged over USB-C.
• Output: adjustable power, with a top end in the region of 30W.
• Pod capacity: 2ml, which is the maximum tank size permitted for nicotine vaping products sold in the UK.
• Coil: mesh coil pods, available in more than one resistance across the Xlim Pro pod range.
• Airflow: adjustable, so you can tighten or loosen the draw to suit your habit.
• E-liquid: works with nicotine salt and standard freebase liquids, in 10ml bottles with a maximum strength of 20mg/ml.
• Variants: the Xlim Pro listing on our store covers eight variants in the family. For a kit these are typically colour and finish options rather than flavours, so check the variant selector for the current line-up.

The rest of this guide goes through how the Xlim Pro actually behaves in use, where it is strong, where it is merely adequate, and who might be better served by a different device. Specifications quoted here are taken from the manufacturer's published figures and sensible reasoning from them, and it is always worth confirming the exact numbers against the packaging that arrives with your order.

Performance and vapour delivery

Performance on a pod kit is mostly a question of how the battery, the coil and the airflow work together, and the Xlim Pro gives you control over all three. With output adjustable up to about 30W, it sits above the fixed-power pen-style devices that fire at a single setting and below the box mods that push well past 60W. That middle ground suits a lot of people. A mesh coil pod reaches vaping temperature quickly, so there is very little lag between pressing or inhaling and getting vapour, and the draw feels consistent from the first puff to the last rather than tailing off as the battery drains.

In practice most users will end up somewhere between 12W and 22W. At the lower end, with the airflow closed down, you get a restricted, mouth-to-lung style draw that feels closer to smoking a cigarette: modest vapour, a noticeable throat sensation with a nicotine salt, and strong flavour concentration. At the upper end, with the airflow opened up, the draw loosens, vapour production rises and the temperature of the inhale climbs. The top of the power range is better treated as headroom rather than a target, because running a small 2ml pod hard burns through e-liquid and drains the battery faster without always improving the experience.

Since the Xlim Pro is refillable, there is no fixed puff count in the way a disposable has one. A realistic expectation for a full 2ml pod is somewhere in the region of 350 to 600 puffs, depending on power, airflow and how long you draw. Short two-second puffs at modest power sit at the upper end of that range. Long four-second pulls at higher wattage sit at the lower end. Heavier users may refill two or three times a day, and lighter users may stretch one fill across a full day.

A few practical points on performance:

• Start low. Begin around 12W to 15W and raise the output in small steps until the flavour and throat feel suit you. If the vapour tastes hot or slightly harsh, you have gone too far.
• Match airflow to nicotine. A tighter draw pairs naturally with a higher-strength nicotine salt. A looser draw usually calls for a lower-strength liquid, which we cover in the nicotine section below.
• Choose the e-liquid ratio carefully. Balanced 50/50 PG and VG liquids wick reliably through a mesh coil of this size. Very thick, high-VG liquids can wick slowly and cause dry or burnt hits.
• Expect consistency, not extremes. This is a device for steady, predictable vaping through the day, not for cloud-chasing competitions.

If your previous experience is a disposable, the first thing you may notice is how much more control you have, and the second is how much more consistent the flavour is from fill to fill, because you are no longer at the mercy of a sealed coil that degrades over a fixed number of puffs.

Flavour profile and choosing e-liquid

Because the Xlim Pro ships without e-liquid, the flavour you get is the flavour you pour in. What the device contributes is the delivery: a mesh coil spreads heat across a wide surface, which tends to give a rounded, well-defined flavour with less of the muted or scorched character you can get from cheaper single-wire coils. Fruit liquids come across with clear top notes, menthol and mint liquids keep their coolness without turning sharp, and tobacco liquids retain some of their dry, earthy depth.

To give you a sense of what works well in a pod this size, here are the flavour families that suit a 15W to 20W mesh pod and a 2ml tank:

• Tobacco: a Virginia or classic tobacco nicotine salt is the usual choice for smokers making the switch, because the familiar profile eases the transition.
• Menthol and mint: spearmint, peppermint and strong menthol all hold up well, and cooling blends keep their freshness through a full pod.
• Blue raspberry: a popular sweet-and-sharp profile that shows off a mesh coil's ability to keep tart and sweet notes distinct.
• Strawberry ice: a soft berry with a cooling finish, which is forgiving at lower wattages.
• Watermelon: light, juicy flavours that suit a slightly looser airflow setting.
• Apple: crisp green or red apple blends, often paired with a hint of menthol.
• Cola and soft drinks: fizzy profiles read clearly on a mesh coil at moderate power.
• Dessert and custard: rich, sweet liquids deliver the flavour but are heavier on the coil, so expect to change pods slightly more often.

On the variant count, the Xlim Pro family on our store lists eight variants. For a kit these are generally finish and colour options. If you want to try several flavours, the practical route is to buy one device and a few 10ml bottles of nicotine salt liquid, rather than looking for flavour-specific hardware.

A few habits keep flavour clean. Rinse or replace the pod when you move between very different profiles, such as a menthol to a dessert, to avoid ghosting, where the previous flavour lingers in the cotton. Keep the pod about two-thirds to three-quarters full rather than topped to the brim, which reduces flooding. Store e-liquid away from direct sunlight, since heat and light dull flavour over time. And be honest with yourself about sweetness: very sweet liquids caramelise on a coil and shorten its life, so if a pod tastes burnt after only a few days, a lower-sweetener liquid may be the fix, not a new device.

Finally, the 10ml bottle size limit in the UK means you will refill often enough that trying a new flavour costs very little. That is one of the quiet advantages of refillables over disposables: experimenting is cheap, and a flavour you do not like does not mean a wasted device.

Design and build quality

The Xlim Pro is a slim, rounded-oval device, roughly the size of a small pack of chewing gum, and light enough to carry in a jeans pocket without a bulge. The family resemblance to the other Xlim models is obvious: a smooth body, a pod that sits in the top, and a minimal set of controls. That familiarity is a point in its favour. Oxva has refined this shape across several generations, and the grip is comfortable in a standard hand, with no sharp edges and enough width that the device does not feel like it will slip out when you take a draw.

Build quality is in line with what you would expect from an established pod brand at this price. The body feels solid, the finish is clean, and the pod seats into the device with a firm, secure fit rather than a loose rattle. The fill port on the pod is sealed with a silicone plug, which keeps e-liquid in place during carrying but needs to be pressed fully back in after each refill. Most leaks reported with pod kits of this type are caused by that plug not being seated, not by any fault in the device itself.

Some design points worth knowing before you buy:

• Compact footprint. The device suits smaller hands and pockets, and it is easy to carry in a bag or jacket without feeling like a piece of equipment.
• Adjustable airflow. The airflow control lets you change the draw without swapping hardware. Check the setting before a draw if you share the device between different settings, because the difference between tight and open is considerable.
• Finish options. The listing covers eight variants. As with most kits, the colour is cosmetic and does not change the electronics.
• USB-C port. The port is a standard, reversible connector, which means no hunting for a proprietary cable.
• Sealed battery. The battery is built in. That keeps the body slim, but it also means the device should be treated as a unit and not opened up or modified.

Honest limitations are worth stating. A slim aluminium or alloy-style body shows fingerprints and light scratches, particularly in darker finishes, and it will pick up marks if you carry it in a pocket with keys. There is no included case in most kits, so a silicone sleeve or a small pouch is a cheap addition for anyone who is hard on their gear. And the pod, being plastic, is the part that wears out first, so treat it as a consumable, not a permanent component.

Overall, the Xlim Pro feels like a considered, practical device rather than a showpiece. It does not draw attention to itself, it fits in a hand and a pocket, and the controls are simple enough to learn within a day of use.

Battery life and charging

The built-in battery is rated by Oxva at around 1000mAh. That figure on its own does not tell you much, so it helps to translate it into something practical. A 1000mAh lithium cell at a nominal 3.7V holds roughly 3.7 watt-hours of energy, which is about 13,000 joules. A three-second puff at 18W uses around 54 joules, which means a theoretical maximum of about 245 puffs from a full charge at that setting. Allowing for real-world losses, you should expect roughly 200 to 250 puffs at 18W with three-second draws. Drop to 12W with shorter two-second draws and the same battery can stretch beyond 400 puffs.

Put differently, a single charge covers about a day of moderate vaping at sensible settings, and light users may get two days. Heavy users or anyone running the device near the top of its power range should expect to top up during the day, which is where USB-C charging helps. You can plug into a phone charger, a laptop port or a power bank, and there is no need for a special adapter.

Practical charging advice:

• Charging time. From low to full typically takes around an hour to an hour and a half on a standard 1A to 2A USB source. Slower sources such as older laptop ports will take longer.
• Use a reputable charger. A branded phone charger is fine. Avoid unbranded, very cheap chargers, which can have unreliable output.
• Do not leave it unattended. Charging overnight in a place you cannot monitor is not recommended for any lithium device, and sensible practice is to unplug once the indicator shows full.
• Avoid heat. Do not charge or store the device in direct sunlight, on a hot dashboard or on a radiator. Lithium cells age faster when hot.
• Partial charges are fine. Modern lithium cells do not need to be run flat before recharging, and regular top-ups from 20 to 80 percent are gentler on the cell than deep discharges.

Battery lifespan is the other consideration. A typical lithium cell in a device like this holds good capacity for several hundred charge cycles. For a daily user topping up once a day, that is the better part of a year of dependable use before capacity noticeably drops, and often longer with careful habits. When the battery eventually fades, the whole device reaches end of life, because the cell is sealed inside, and the sensible step is to recycle it properly, which we cover in the UK rules section.

If battery life matters more to you than size, it is worth being honest that 1000mAh is a middle-of-the-road capacity for a compact pod. Larger devices with 1500mAh to 3000mAh cells run longer between charges, at the cost of weight and bulk. The Xlim Pro trades some endurance for portability, and for most daily users that trade is acceptable.

Pods, coil and mesh technology

The pod is where the Xlim Pro earns or loses its keep. Each pod holds 2ml of e-liquid and contains a built-in coil, so replacing the pod replaces the heating element at the same time. Oxva's Xlim Pro pods use a mesh coil, which is a flat, perforated sheet of resistance material rather than a round wire wrapped around cotton. The larger heating area warms the e-liquid more evenly and tends to produce smoother vapour and more consistent flavour than a conventional wire coil of the same size.

The pod range for the Xlim Pro includes more than one coil resistance. As a rule of thumb for this class of device, a lower-resistance mesh pod, in the region of 0.4 to 0.6 ohms, suits a looser draw and higher output, while a higher-resistance pod suits a tighter, mouth-to-lung style at lower output. The resistance is printed on the pod, so check it when you order replacements, and confirm the exact options against the product listing and packaging, since Oxva has released several pod variants across the Xlim family and they are not all interchangeable.

Getting reliable results from a mesh pod comes down to habit:

• Prime before first use. After filling, let the pod sit for five to ten minutes so the cotton behind the coil saturates. Firing a dry coil is the quickest way to ruin it.
• Do not chain vape hard. Short pauses between puffs let the cotton re-wet. Rapid, long draws at high power can outpace the wicking and cause a burnt taste.
• Keep the e-liquid level healthy. If the pod gets very low, refill it. Running a pod nearly empty is another common cause of dry hits.
• Choose suitable e-liquid. Balanced PG and VG ratios, around 50/50, wick most reliably. Very thick liquids and heavily sweetened ones are harder on the coil.
• Match power to the pod. Stay within the range suggested for the resistance printed on the pod, which usually sits well below the device's maximum.

Pod life varies a lot with use. A typical mesh pod lasts somewhere between one and three weeks for a regular daily vaper, shorter with sweet liquids and high power, longer with menthol, tobacco and lower settings. Signs that a pod has finished include a flat or burnt taste that does not clear when you refill, vapour that seems thinner than before, or gurgling that persists even with a clean airflow channel.

Spare pods are sold in packs, and it is sensible to keep one in reserve so a worn coil does not leave you without a way to vape. If the pod is the only consumable you replace regularly, the running cost is modest next to buying a disposable every day or two, which we compare in the value section.

Nicotine strength guidance

Choosing the right nicotine strength is one of the most important decisions for anyone moving from smoking to vaping, and it interacts directly with the settings on the Xlim Pro. In the UK, nicotine e-liquid is capped at 20mg/ml, which is 2 percent, and bottles are limited to 10ml. That cap applies to refillable e-liquid and to disposable vapes alike, so you will not find a legal retail liquid stronger than 20mg/ml. The kit itself contains no nicotine until you fill it.

The two main types of nicotine behave differently, and that affects which you pick:

• Nicotine salts are available at 10mg and 20mg in the UK. They are smoother at a given strength and deliver nicotine quickly, which makes them a common choice for smokers on a pod device with a tighter draw.
• Freebase nicotine is usually sold at 3mg, 6mg or 12mg. It is harsher at higher strengths and suits looser, higher-power setups with larger vapour volume.

As general guidance, not medical advice, a sensible starting point looks like this:

• Heavier smokers who are used to around 15 or more cigarettes a day often start on 20mg nicotine salt with the airflow tightened and output around 12W to 16W.
• Moderate smokers of roughly 10 cigarettes a day often settle on 10mg to 18mg salt, adjusting by how satisfied they feel and how harsh the throat hit is.
• Lighter smokers and social smokers typically do well with 10mg salt, or a lower freebase strength if they prefer a looser draw.
• Experienced vapers stepping down may move to 5mg to 10mg once they feel in control of their habit.

Power and nicotine strength work against each other. A higher output with an open airflow produces more vapour per puff, so the same strength of liquid delivers more nicotine in a single draw. If you raise the wattage and notice a harsh throat hit, dizziness or a jittery feeling, the cure is to lower the strength or the output, not to push through it. If you feel unsatisfied and keep reaching for the device, a modest increase in strength or a slightly tighter draw is a better response than vaping constantly at a weak setting.

Nicotine is addictive, and the Xlim Pro is intended for adults who currently smoke or already vape. If you do not smoke, you do not need to start. Anyone who is pregnant, has a heart condition or takes regular medication should speak to a GP or pharmacist first. Free local stop-smoking services are available through the NHS, and they often provide vaping starter support alongside behavioural advice, which improves quit rates for many people.

Who the Xlim Pro is for, and who should skip it

No device suits everyone, and a sensible buying decision starts by being honest about what you want. Here is where the Xlim Pro fits well and where another option may serve you better.

The Xlim Pro suits:

• Smokers switching to vaping who want a compact, easy-to-learn device with a draw they can tune towards a cigarette-like feel.
• Former disposable users who want to leave single-use devices behind, reduce running costs and keep the pocket-friendly format.
• Vapers who like to adjust their output and airflow rather than being locked to a single factory setting.
• People who like to vary flavours and are happy to buy several 10ml bottles and swap them in.
• Adults wanting a reliable everyday device that sits in a pocket and charges from a standard USB-C cable.

You may want to skip it if:

• You want zero effort. A refillable kit means filling, priming and occasionally changing pods. If you want to open a box and vape immediately with no preparation, a pre-filled option, where legal and available, will feel simpler, though it will cost more to run.
• You want big clouds. The Xlim Pro is a pod system, not a sub-ohm tank. If large vapour volume is your priority, a larger device with a wider coil and more power is a better fit.
• You need all-day battery without charging. A 1000mAh cell is fine for typical use, but heavy vapers will want to carry a charger or consider a larger-capacity device.
• You dislike maintenance. Wiping the pod, checking the plug and replacing coils is part of ownership. It is not difficult, but it is not zero.
• You do not smoke or vape already. Nicotine is addictive, and a vape is intended as a tool for adults who smoke, not a recreational product for non-smokers.
• You are under 18. It is illegal to sell nicotine vapes to anyone under 18 in the UK, and our checkout requires age confirmation.

There is also a middle group: occasional vapers. If you vape once or twice a week, a refillable kit still works, but you will need to keep the pod fresh. E-liquid left in a pod for weeks can pick up a stale taste, so empty and rinse the pod if the device will sit unused. If your usage is that light, it is worth asking whether you need nicotine at all, or whether a lower strength would do the job.

The short answer is that the Xlim Pro is a good match for the everyday adult user who wants adjustability and portability without moving up to a larger, more complicated device.

How to set up and use the Xlim Pro

Setup takes about ten minutes of hands-on time, plus a short wait for the pod to prime. The steps below apply to most pod kits of this style. Check the leaflet in your box for model-specific button sequences, since the controls can differ slightly between production batches.

• Step 1: Charge the device. Plug it into a USB-C source and let it reach a full charge before first use, which helps the battery settle. Do not use it while it is charging on a regular basis.
• Step 2: Prepare the pod. Remove the pod from the device and take out the silicone plug on the fill port. Check that the coil side is intact and that any protective film has been removed.
• Step 3: Fill the pod. Angle the bottle tip into the fill port and add e-liquid slowly. Stop below the top of the fill line, aiming for around three-quarters full. Do not cover the central airflow tube, which would flood the coil.
• Step 4: Reseat the plug. Press the silicone plug fully back into the port. A partly seated plug is the most common cause of leaking.
• Step 5: Let it prime. Wait five to ten minutes so the cotton wicks properly. For a brand new pod this step matters, because firing dry will damage the coil.
• Step 6: Insert the pod. Push the pod into the device until it seats firmly. Wipe off any e-liquid on the outside.
• Step 7: Turn it on. Follow the on and off sequence in the leaflet, which usually involves a set number of presses on the button.
• Step 8: Set output and airflow. Begin at a low output, around 12W to 15W, with the airflow partly closed, and adjust one step at a time.
• Step 9: Take a gentle first few puffs. Draw slowly, hold for a moment, then exhale. Fire by inhaling or by pressing the fire button, depending on how your unit is configured.

For everyday use, a few habits will save you trouble. Refill when the pod is about a third full rather than waiting until it is empty. Wipe the contacts and the mouthpiece with a dry tissue now and then. Turn the device off, or use the lock function if available, when it goes in a bag or pocket so it cannot fire by accident. And keep it upright where possible, since carrying it mouthpiece-down can encourage condensation to run into the airflow channel.

If you are new to vaping, give yourself a week to adapt. Your taste for flavour and your tolerance for throat hit will change as you stop smoking, and your preferred settings will probably move. That is normal. Keep notes if you like, or just adjust gradually until the device feels like it suits you.

Troubleshooting common problems

Most issues with pod kits have simple causes. Work through the following list before assuming a device is faulty, and contact us if the problem persists after the basic checks.

• The pod leaks. Check that the silicone plug is fully pressed in, and that you did not fill past the line or block the central airflow tube. Wipe the pod and the device contacts dry. Leaks are also more likely with very thin e-liquids and with pods that have been kept at an angle or in a warm pocket.
• Gurgling or spitting. This usually means condensation or flooding. Remove the pod, blow gently through the mouthpiece to clear the airflow channel, and wipe the area. Lower the output slightly or open the airflow a notch if it keeps happening.
• Burnt or dry taste. The most common cause is a coil that has not been primed, an almost empty pod, or a worn coil. Refill, wait five minutes and try again. If the burnt taste returns after a refill, replace the pod.
• Weak or flat flavour. The coil may be tired, or the e-liquid may be old. Try a fresh pod and a fresh bottle. Very sweet liquids can also coat the coil and dull the flavour, in which case a rinse or a replacement helps.
• The device will not fire. Check that it is switched on, that the pod is seated properly, and that the battery has charge. Clean the contacts at the base of the pod with a dry tissue. If the device displays an error, consult the leaflet for the specific meaning.
• The battery does not last. High output, long draws and heavy use all drain the cell faster. Lower the power, shorten the puffs, and make sure you are using a reliable charger. If the device is more than a year old and used daily, some capacity loss is normal.
• The device will not charge. Try a different cable and a different power source. Check the USB-C port for lint, and clean it carefully with a wooden toothpick, never a metal object. If it still does not charge, contact us with your order details.
• A throat hit that is too harsh. Reduce the nicotine strength, lower the output, or open the airflow a little. A strong throat hit on a good setup can also mean the liquid has too high a nicotine level for your current habits.
• The pod will not seat. Make sure the pod is the correct type for the device and that the contacts are free of residue.

If you find a fault that is not on this list, remove the pod, stop using the device and contact us. Do not open the body, and do not try to replace the battery. A sealed lithium cell should only ever be handled by the manufacturer or a professional recycler, and a damaged cell should be taken out of use immediately and stored somewhere safe until it can be recycled.

For safe habits in general, keep the device out of reach of children and pets, since both the e-liquid and the device itself can cause harm if misused, and store nicotine bottles with their child-resistant caps in place.

Value for money and how it compares

The value case for the Xlim Pro rests on running costs. The upfront price of the kit is a one-off, and our product page shows the current price. After that, your regular costs are 10ml bottles of e-liquid and replacement pods. A moderate vaper on nicotine salts often uses around 2ml to 4ml a day, which means a 10ml bottle lasts roughly three to five days. With UK nicotine salt bottles commonly priced in the low single-digit pounds, weekly liquid spending is typically small. A pod every one to three weeks adds a modest amount on top. Compare that with a disposable at around the five or six pound mark that lasts a day or two for a regular user, and the gap grows quickly over a few months. The disposable ban has also made the comparison academic in most shops, since single-use devices can no longer be sold.

Here is how the Xlim Pro compares against alternatives in the same bracket, in fair terms:

• Vaporesso XROS series. These are the closest direct rivals, with similar pod capacity, similar battery sizes and widely available spares. They are often simpler in operation, and the XROS pods are stocked by many shops. The Xlim Pro's advantage is the adjustable output and airflow in a small body, which some users want and some find unnecessary.
• Uwell Caliburn series. The Caliburn line is aimed at tight, mouth-to-lung vaping with a fixed output and a strong reputation among former smokers. If you want simplicity and a cigarette-like draw with no adjustment, a Caliburn can be easier. If you want to vary your draw, the Xlim Pro offers more flexibility.
• Smok Novo series. Novo pods are cheap and widely stocked, which helps running costs, and some models are very slim. The trade-off is that flavour and power options are narrower than a device like the Xlim Pro with an adjustable range.
• Geekvape Wenax series. These pod kits cover a broad range of sizes and styles, and several suit a similar user. Choice between them often comes down to personal preference on ergonomics and local pod availability.

Taken together, the Xlim Pro is a competitive choice without being the only reasonable one. It does not beat every rival on every measure. Pod availability on the high street can be patchier than for the biggest-selling brands, which is a point worth weighing if you rely on corner shops for spares. Buying a spare pod pack with your first order removes that concern.

If your priority is lowest outlay and simplest use, a basic fixed-output pod kit may cost less. If your priority is flexibility, a compact body and mesh coil flavour, the Xlim Pro offers fair value for the money. Weigh the one-off price against your realistic weekly use, and remember that the device itself should last far longer than any disposable ever could, as long as you look after the battery and replace pods on time.

UK rules, care and recycling

Vaping products sold in the UK come with clear rules, and knowing them helps you buy and use the Xlim Pro responsibly. Nicotine e-liquid is limited to a maximum of 20mg/ml and sold in bottles of no more than 10ml. Refillable tanks and pods are limited to a 2ml capacity, which is why the Xlim Pro pod holds 2ml. Packaging must carry health warnings, and nicotine products may only be sold to people aged 18 or over. Our store carries out age checks at order stage, and carriers may ask for ID on delivery for some orders.

On use in public, there is no single national ban on vaping in every public place, but many venues, workplaces, public transport operators and schools have their own policies, and some are expanding them. Always check the rules where you are and be considerate of others nearby, particularly children and anyone sensitive to vapour.

Care for the device is straightforward:

• Keep it clean. Wipe the pod base, the contacts and the mouthpiece with a dry tissue or a slightly damp cloth, and let it dry before use.
• Store it sensibly. Keep the device and e-liquid at room temperature, out of direct sun and away from heat sources. Never leave them in a hot car.
• Protect it from damage. Avoid dropping the device or crushing it in a bag. Damage to the casing can also damage the battery inside.
• Stop using damaged batteries. If the device becomes unusually hot, swells, smells odd or leaks, stop using and charging it immediately and keep it somewhere safe away from flammable materials.

Recycling matters because the Xlim Pro contains a lithium-ion battery. Vape devices must never go in household rubbish or normal recycling bins, because crushed batteries can start fires in collection vehicles and waste facilities. Instead, take the device to a drop-off point. UK shops that sell vapes are required to accept waste electrical items back, and household waste recycling centres run by local councils will take small electricals and batteries. Many supermarkets also have collection points for small electrical items. Empty the pod of e-liquid first where you can, and follow local guidance on pods and empty bottles, which vary between councils.

Choosing a refillable kit over repeat disposables already cuts the volume of electronic waste you create. Recycling the device at the end of its life closes the loop and keeps valuable materials in use. It also keeps hazardous cells out of the general waste stream, which protects the people who work in the recycling chain.