Peach Mango Watermelon SKE Crystal CL6000 Prefilled Pods and Refill Containers

Overview

The Peach Mango Watermelon SKE Crystal CL6000 Prefilled Pods and Refill Containers by SKE delivers up to 6,000 puffs in Peach Mango Watermelon at 10mg and 20mg. Pick up the BUY 4 FOR £23 multibuy — free UK delivery over £20 and same-day dispatch on weekday orders before 4pm.

SKE Crystal CL6000 Peach Mango Watermelon: what this listing covers

SKE Crystal CL6000 Prefilled Pods and Refill Containers Peach Mango Watermelon is a three-fruit nicotine salt flavour for the SKE Crystal CL6000 system, carrying the range's headline rating of 6,000 puffs. It is sold as the consumable side of the CL6000 line. That means prefilled pods and refill containers, not a battery body. If you do not already own a CL6000 device, the separate CL6000 vape kit is the place to start, and this listing is the one you come back to once you are running the system.

SKE is the company behind the Crystal Bar name, which many UK vapers will remember from the 600-puff disposable years. Single-use vapes have been illegal to sell anywhere in the UK since 1 June 2025, and products like the CL6000 are part of what filled that gap: a rechargeable device you keep, and a pod or refill you replace. This flavour is Peach Mango Watermelon, which puts stone fruit, tropical fruit and melon into one blend aimed at adults who like a vape that is sweet and juicy rather than cool or sharp.

The quick facts, so you can decide whether to read further:

• Brand and line: SKE, Crystal CL6000
• Format: prefilled pods and refill containers, used with a CL6000 device
• Flavour: Peach Mango Watermelon
• Headline rating: 6,000 puffs, as quoted by the manufacturer
• Liquid type: nicotine salt
• Strength: 20mg/ml is listed, which is also the UK legal ceiling
• Age restriction: 18+ only, with age verification at checkout

Nicotine is addictive. This product is for adult smokers and vapers, and it is not intended for anyone who does not already use nicotine. The rest of this page covers performance, flavour, hardware, strength choice, who should skip it, how to use it, what goes wrong and how it compares on value.

How the 6,000 puff rating works in practice

A puff rating is a manufacturer's estimate, not a measured guarantee, and the 6,000 puff figure on this listing should be read that way. What matters is understanding what the number describes, because it is easy to misread when the product is a pod system rather than a sealed disposable.

UK rules cap any prefilled pod or tank at 2ml of liquid, and refill containers for nicotine liquid at 10ml. A single 2ml pod cannot deliver anything close to 6,000 puffs on its own. A commonly used yardstick is somewhere around 300 puffs per millilitre of nicotine salt liquid at a normal draw length, which would put 6,000 puffs in the region of 20ml of liquid in total. So the rating describes what the CL6000 system can deliver across the pods and refill containers used with it, not what one pod holds. We would rather say that plainly than have anyone expect weeks of use from a single pod.

Real numbers move with the way you vape. Three things shift the figure more than the label does:

• Draw length. Long, slow pulls use more liquid per puff than short taps, so the same liquid gives fewer puffs.
• Frequency. Taking draws back to back heats the coil without a rest, which uses liquid faster and can flatten the flavour.
• Nicotine strength. Adults on a lower strength often take more draws to feel satisfied, which uses the liquid faster.

On paper, someone taking about 200 draws a day would stretch 6,000 puffs across roughly a month, and a lighter user would go further. In practice most people finish short of the printed figure, so treat it as an upper marker rather than a promise.

In use, a pod system of this type gives a modest, even cloud and a tight draw that sits closer to a cigarette than to a sub-ohm tank. Flavour is usually strongest through the first half of a pod and tails off gently as the wick dries. A burnt or flat taste is your cue that the pod is spent, not a fault with the device. If you want large, billowing clouds, this is the wrong category entirely, and we say so in the section on who should skip it.

Flavour profile: Peach Mango Watermelon in detail

Peach Mango Watermelon is a layered fruit blend, and it helps to think of it in three parts rather than one. We describe it from the way fruit blends of this type are built, and individual palates differ, so treat the notes below as a guide rather than a lab result.

• Peach. This usually arrives first on the inhale: soft, slightly syrupy, with the gentle floral edge of ripe stone fruit. It is the lightest of the three and tends to set the tone for how sweet the blend feels.
• Mango. The mango gives the blend its body. Expect a rounder, fuller tropical note that fills the middle of each draw and carries most of the sweetness.
• Watermelon. Watermelon tends to appear on the exhale as a light, watery sweetness that lifts the heavier fruit and leaves a clean finish rather than a heavy one.

The name does not mention ice or menthol, so there is no reason to expect a chilled finish. The profile should read as warm, juicy fruit with a candy-like sweetness, in the same family as a fruit punch or a tropical smoothie. If you like a cooling edge, the range has options for that, covered in the next section.

Sweetness sits in the medium to high bracket. That suits adults who vape on a fruit flavour all day and want something rounded, but it can feel heavy if you prefer a drier, sharper profile. Sweet blends also invite palate fatigue, where the flavour seems to fade after a few days even though the liquid has not changed. Rotating with a contrasting flavour, such as something sour or cool, usually brings the taste back.

Nicotine salts are smoother on the throat than traditional freebase nicotine at a comparable strength, which lets the fruit come through without a harsh scratch at the back of the throat. That smoothness is part of why fruit blends dominate pod systems like this one. If you are moving from tobacco, expect a clear step away from the flavour you are used to, and give it a week or two before you judge it.

Peach Mango Watermelon against the rest of the CL6000 range

Peach Mango Watermelon is one of a larger family under the CL6000 name. Not every flavour is in stock at all times, so the list below shows the shape of the range rather than a promise of availability. It includes:

• Watermelon Ice, the closest sibling, with a single melon note and a chilled finish
• Sour Pineapple, a sharper tropical option with a tangy edge
• Strawberry Burst, a sweet red-berry flavour with no sour component
• Blue Razz Lemonade, a blue raspberry and lemon blend that leans tart
• Cherry Ice and Fizzy Cherry, one cool and one fizzy take on cherry
• Pink Lemonade, a light, drink-style citrus and berry flavour
• Lemon and Lime, a bright citrus pairing for people who want less sweetness
• Blueberry Raspberries and Blueberry Sour Raspberry, for berry fans

Other names such as Double Apple, Berry Medley, Grape Splash and Strawberry Raspberry Cherry have also appeared under the CL6000 banner, so it is worth checking the SKE collection if your first choice is out of stock.

Where does Peach Mango Watermelon sit among them? It is the softest and most tropical of the group. Watermelon Ice is the better pick if you want a cooler, simpler melon. Sour Pineapple suits anyone who finds peach and mango too sweet. Strawberry Burst is the straightforward choice for someone who wants plain sweetness with no tang. Blue Razz Lemonade and Lemon and Lime sit at the sharper end, which makes them sensible partners for rotation.

A practical approach for a first order is to buy this flavour alongside one contrasting option, then settle on whichever you reach for more. Nobody gets every flavour right first time, and pods within the same line share a format, so changing flavour does not mean changing device.

Design, pod format and what you need alongside it

This listing is the consumable half of the system, so it helps to be clear about the parts. The CL6000 device is a rechargeable battery body. The prefilled pod holds the liquid, the wick and the coil, and it fits into the device. The refill container is a sealed container of matching liquid, intended to extend the life of the pod, and the pack instructions explain how it is used. If you are new to the range, check the pack contents on the listing before you order.

Pods and bodies in this price class are generally moulded plastic, built to be light enough to carry in a pocket and simple enough that there is nothing to adjust. There is no screen to learn and no wattage dial. The trade-off is that plastic pods are not designed to last: they are a consumable, and a pod that has been dropped, squeezed or left in the sun is more likely to leak than one that has been looked after.

A few points about the format that are worth knowing before you buy:

• Pods are not universal. A CL6000 pod is made for the CL6000 body. It will not fit a different brand's device, and a different brand's pod will not fit this one.
• The pod size is capped. In the UK a prefilled pod holds no more than 2ml, and a nicotine refill container holds no more than 10ml, so you will not see larger sizes sold legally.
• Packaging has legal requirements. Nicotine liquid containers must be child-resistant and tamper-evident and must carry a health warning, which is why the packaging looks more clinical than the flavour name suggests.
• You need a device. Without a CL6000 body this pack does nothing on its own, so buy the kit first if this is your first purchase.

On build quality, the honest summary is that this is a mainstream consumer product and should be judged as one. The pod connection should seat with a firm click, the mouthpiece should feel stable, and nothing should rattle. If a pod will not seat cleanly or you see liquid on the contacts out of the packet, treat that as a fault and contact us rather than forcing it.

Battery and charging

The battery lives in the device, not in the pod. That is one of the practical advantages of the format: the part that holds a rechargeable lithium cell is the part you keep, and the part you throw away is the pod. One CL6000 body will see through many pods across its life, so charging habits matter more than they would on a disposable that you never charged at all.

We do not quote a milliamp-hour figure for the CL6000 body on this page, because we would rather not repeat a number that cannot be checked against the listing. The kit page carries the device details. What we can say is that these are draw-activated devices that recharge over USB, and that for a pod system of this size the battery is rarely the limiting factor. The pod runs out of liquid before the battery runs out of life, provided you charge it when it is low.

Sensible charging habits are short and boring, which is the point:

• Use a standard low-power USB source. A laptop port or a basic phone charger is fine. A very high-output fast charger is unnecessary.
• Do not charge on soft furnishings. A sofa cushion or a duvet traps heat. Charge on a hard, dry, clear surface.
• Do not leave it charging unattended overnight as a habit. Most devices stop when full, but there is no reason to stack the odds.
• Keep it out of heat. A hot car or a sunny windowsill stresses the cell and also encourages liquid to leak.
• Stop using it if it swells, gets unusually hot or smells of burning. Do not charge it again, and take it to a proper recycling point.

Top up when the device is running low rather than running it flat every time, and keep the charging contacts clean and dry. When the device finally wears out, do not put it in the household bin. A vape contains a lithium battery, and lithium cells are a known cause of fires in bin lorries and waste sites. Many council recycling centres, large supermarkets and electrical retailers accept small electrical items and vapes for recycling, and it is worth using one.

Coil and wick: how the liquid becomes vapour

Every pod contains a heating coil wrapped in an absorbent wick. When you draw, the device detects the airflow, powers the coil, and the heated wick turns the liquid into vapour. In a prefilled pod the coil is built in, which means your coil is replaced every time you replace the pod. There is no coil to buy, fit or prime separately, and no way of putting in a worn one by mistake.

Coils in this class are typically mesh or cotton-wicked designs tuned for a mouth-to-lung draw. That is the tighter, cigarette-like pull where you draw into your mouth first and then inhale. SKE does not publish a coil resistance on the listing, so we do not quote an ohm figure, and we would not trust a number we could not source. What you can rely on is the behaviour: low power, a modest vapour volume, and a flavour that stays reasonably true to the liquid.

Because the liquid is a nicotine salt, the coil does not need high wattage. Salts are designed for low-output devices, which suits a small battery and keeps the throat feel smooth. High power would only scorch the liquid and waste battery.

A few coil-related points are worth understanding:

• Priming matters. A new coil needs the wick to be saturated before you draw on it. Clicking the pod in and waiting a minute lets liquid soak through. Drawing straight away is the usual cause of a burnt first hit.
• Sweet liquids age coils faster. Sugar-style sweeteners in dessert and fruit blends tend to build up on a coil over time, which is why flavour can seem to dim towards the end of a pod. It is a normal part of how these systems wear, not a defect.
• A dry wick cannot be fixed. If you scorch the wick, the burnt taste stays. Swapping to a fresh pod is the only remedy.
• Constant draws shorten coil life. Short breaks let the wick re-saturate and keep the taste cleaner.

The upside of a closed pod design is simplicity: the coil is matched to the liquid by the manufacturer, so you are not left guessing about compatibility.

Choosing a nicotine strength

The listing for this flavour shows 20mg. UK law caps nicotine in e-liquid at 20mg per ml, and the same ceiling applied to the single-use disposables sold before the 2025 ban, so a 20mg pod sits at the legal maximum rather than above anything. If a 10mg option appears in the strength selector on the page, it is the gentler choice. Everything below applies to nicotine salt, which is what this is.

Strength is the single decision on this page most worth thinking about, because getting it wrong costs you either satisfaction or money:

• 20mg gives the firmest throat hit and is the usual starting point for adults who smoked heavily, for example around a pack a day, and want the vape to stand in properly for cigarettes. Because nicotine salts are smooth, 20mg does not feel as harsh as the same label strength in a freebase bottle.
• 10mg suits lighter smokers, adults who have already been vaping for some time and want to step down, and anyone who finds 20mg too sharp. It is the common middle ground.

The instinct to go as low as possible usually backfires. If a strength does not satisfy you, you compensate by vaping more often, which costs more, empties the pod faster and rarely feels better. A heavier former smoker typically starts at the top of the range and steps down over weeks or months once the habit settles. Someone who smoked lightly is usually comfortable in the middle from the start.

Be aware that nicotine salts are absorbed more efficiently than freebase at the same label strength. Some adults who are used to a 12mg freebase bottle find that a 10mg salt feels closer to it than the numbers suggest, so do not assume the lower number is weak.

If you do not smoke or vape already, do not start. Nicotine is addictive, and this product exists for adult smokers and vapers who want an alternative. Under-18s cannot legally buy it, and we verify age on every order. If you are unsure about strength, ask us before ordering, as it is quicker than finding out by trial and error.

Who this suits, and who should skip it

No product is for everyone, and a pod system with a sweet fruit flavour is a narrower fit than the marketing implies. Here is the honest split.

This is likely to suit you if:

• You are an adult smoker moving to vaping and want something with no settings, no tank to fill and no coil to build.
• You already own a CL6000 device and want a flavour with more body than a single-fruit option.
• You like sweet, juicy fruit blends and find menthol or ice too cold.
• You want a pocketable device that you charge and forget about rather than manage.
• You like to rotate flavours and are happy to buy two or three at a time.

You should probably skip it if:

• You do not have a CL6000 device. This listing is the pod and refill, not the hardware. Buy the kit first.
• You want a cooling flavour. There is no ice in the name, and you should not expect one. Watermelon Ice or Cherry Ice are closer to that.
• You prefer tobacco or dessert flavours. This is a fruit blend and will not scratch that itch.
• You want large clouds or adjustable power. A low-power closed pod does not do that, and a refillable tank kit would suit you better.
• You are price-led on a per-millilitre basis. Bottled e-liquid in a refillable kit is cheaper per ml than any prefilled pod.
• You are under 18 or do not currently use nicotine. Do not buy this.

There is also a middle group worth naming: people who find very sweet liquid cloying after a few days. If that is you, buy one of the sharper flavours alongside this so you can swap before the sweetness wears on you.

How to use it: setup, priming and refilling

The CL6000 system is deliberately simple, but a few habits make the difference between a pod that tastes right to the end and one that does not. Always read the leaflet in the pack, as it takes precedence over anything general here.

• Step 1, charge the device. If your CL6000 body has been sitting unused, give it a charge over USB before the first session so it does not cut out mid-use.
• Step 2, unpack the pod. Take the pod out of its packaging and remove any protective cap or seal from the mouthpiece and the base. Check that nothing is leaking.
• Step 3, fit it. Push the pod firmly into the device until it clicks into place. It should seat flush with no wobble.
• Step 4, wait a minute. This is the step people skip. The wick needs time to soak up liquid. Drawing on a dry wick scorches it and leaves a burnt taste you cannot get rid of.
• Step 5, draw gently. The device is draw-activated, so there is no button to press. A smooth, slow pull works better than a hard one. Hard pulls pull in more liquid than the coil can vaporise and can cause gurgling or leaks.
• Step 6, rest between sessions. Short gaps keep the coil from overheating and help the wick stay saturated.

On the refill container, follow the instructions printed in the pack, as the exact method depends on how the pod is designed to be topped up. As general good practice, keep the pod upright while you refill, do not exceed the pod's stated capacity, wipe up any spills at once and let the pod rest a minute afterwards so the wick can absorb the new liquid. Never top up a pod with anything other than the liquid it was made for, and do not mix liquids from different containers.

When you store spares, keep them upright, out of direct sun and away from children and pets. Nicotine liquid is harmful if swallowed or if it gets on the skin or in the eyes, so keep containers closed and rinse any skin contact with water.

Troubleshooting common problems

Most problems with pod systems come down to a handful of causes. Run through these before assuming something is faulty.

• Burnt or harsh taste. The usual cause is drawing before the wick has soaked, or draws that are too frequent and too hard. A scorched wick cannot be rescued, so the answer is a fresh pod, and a one minute wait next time.
• Weak or fading flavour. This is often palate fatigue rather than a problem with the pod. Try a contrasting flavour for a day or two. If the pod is old, flavour also thins as the liquid runs down, which is normal.
• No vapour or no response. Check the battery first, then check that the pod is seated fully and that the contacts are clean and dry. Remove the pod, wipe the contacts gently with a dry cloth and refit it.
• Leaking. Heat and pressure are the usual culprits. A warm pocket, a hot car or a flight can push liquid through the seals. Store pods upright and avoid squeezing the device. If liquid is pooling on the contacts, wipe it off before charging.
• Gurgling or a hard draw. A gurgle means there is excess liquid in the airflow path, often from a draw that is too hard. Hold the device upright, wipe the mouthpiece, and take gentler pulls.
• Device flashes or cuts out. Most devices use a light pattern to show low battery or a fault. Charge it, and if the pattern persists with a full battery, contact us with the details.
• Pod will not fit. Confirm you have a CL6000 body and not a different SKE device. Different SKE lines use different pods.

Do not try to open, refill or modify a sealed pod beyond what the pack instructions describe. If something feels wrong, such as heat, swelling or a chemical smell, stop using it.

Disposal also counts as part of looking after the product. Used pods contain a coil and residual nicotine liquid, and the device contains a battery. Neither belongs in household waste. Use a retailer take-back or a council recycling centre drop-off point for small electricals, and keep the pod out of the reach of children until you have done so.

Value for money and how it compares with other options

The useful figure is not the shelf price but the cost across a month of use. We have left an exact price off this page, because it can change with offers, so check the price on the listing and divide it by the puffs you realistically expect. Multibuy offers appear on the listing when they are running, and they are usually the biggest single lever on cost.

Here is how the CL6000 pod and refill format stacks up honestly against the alternatives:

• Against bottled e-liquid in a refillable kit. Bottles are cheaper per millilitre, and a nicotine salt bottle is capped at 10ml in the UK. You pay for that saving with fiddly filling, coil changes and a device with more settings. If you value convenience, a prefilled pod is worth the premium. If you value cost, bottles win.
• Against the SKE 30K Pro Max pods. The Pro Max line carries a much higher puff rating and a higher price per pod, on a different device. If you vape heavily and want fewer purchases, the larger system may suit you. If you prefer a smaller, simpler device and a lower outlay, the CL6000 is easier to start with.
• Against the Hula 7000 prefilled pod kit. This sits in a similar puff class and is built around the same idea of a rechargeable body and a prefilled pod. The difference comes down to flavour range, device feel and price on the day, so compare the flavours you actually want rather than the number on the box.
• Against the Al Fakher 30K Hypermax pods. Another larger-rating system. Again, the rating is higher but the device is different, and you commit to that ecosystem instead of this one.
• Against closed pod systems from other brands. The differences tend to be flavour selection, pod availability and how easy the brand's pods are to find. Staying in a range with plenty of flavours, as SKE has, makes it easy to change without changing device.

Be wary of any comparison that rests purely on the puff number. Every brand measures generously, and the rating does not tell you how the draw feels, how the flavour holds up or how often you will be buying. The honest position is that the CL6000 is a mid-range convenience product. It is not the cheapest way to vape, and it does not claim to be.

Where it earns its place is in a broad flavour range under one device, low effort, and a format that survives the UK rules on single-use products. If those matter to you, it is reasonable value. If you are counting every penny per millilitre, look at bottles.