SKE Crystal CL6000 Vape Kit

Overview

The SKE Crystal CL6000 Vape Kit by SKE delivers up to 6,000 puffs across 26 flavours at 10mg and 20mg. Pick up the BUY 3 FOR £25 multibuy — free UK delivery over £20 and same-day dispatch on weekday orders before 4pm.

SKE Crystal CL6000 Vape Kit at a glance

SKE Crystal CL6000 Vape Kit is a rechargeable pod device from the SKE range, supplied with a prefilled pod that carries a 6,000 puff rating and nicotine salt e-liquid. It sits in the big-puff part of the market, where the idea is to carry one pod for a long stretch instead of swapping or refilling every day. At the time of writing the kit is priced at £8.99, with a Buy 3 for £25 offer, and it is sold in a family of fruit-led and iced flavours that we walk through in detail below.

This guide follows the order in which most buyers ask their questions: how the kit performs, what the flavours taste like, how it is built, how long the battery lasts, which nicotine strength to pick, who it suits, how to set it up, what to do when something misbehaves, and whether the price holds up against the alternatives. Where a specification is confirmed in our product data we state it plainly. Where it is not, we say so, because an invented milliamp-hour figure or coil resistance does nothing for a buyer except mislead them.

• Puff rating: 6,000 puffs per prefilled pod, as stated by the manufacturer
• Format: reusable, rechargeable kit with a replaceable prefilled pod
• E-liquid: nicotine salt
• Strengths: 10mg and 20mg
• Price: £8.99 per kit, or three kits for £25
• Delivery: free UK delivery on orders over £20, with dispatch before 4pm

Like everything we sell, this kit is strictly for adults. You must be 18+ to buy nicotine products in the UK, and orders are age checked. The kit is popular with adults who are moving away from cigarettes and want something simple to carry, but it contains nicotine, which is addictive, and it is not intended for anyone who does not already use nicotine.

Performance and puff delivery

The headline number on this kit is 6,000 puffs, and it deserves some context. A puff rating is the manufacturer's own figure, normally produced on a machine that takes short, evenly spaced draws. A person is not a machine. Someone who takes long, slow four second pulls will use the pod faster than the rating suggests, while someone who takes brief, light draws may match it or get close. Treat 6,000 as an upper-end guide to how long a pod can last, not as a promise of how many puffs you will personally get.

It helps to turn the number into days. A light user taking around 150 puffs a day is looking at roughly 40 days from a pod on paper. At 300 puffs a day that falls to about 20 days, and at 500 puffs a day, which is a heavy pattern, you are closer to 12 days. Real life will usually land a little under those figures, so budget for the lower end and be pleasantly surprised if it stretches.

On delivery, the kit uses nicotine salt e-liquid, which is known for a smoother feel in the throat than traditional freebase liquid at the same strength. The draw style is mouth to lung, meaning you pull the vapour into your mouth first, pause briefly and then inhale. Vapour volume is moderate rather than cloud-heavy, which suits discreet use and keeps the flavour concentrated instead of diluted by a huge airflow.

• Consistency: flavour should be steady from the first puff through most of the pod's life, then thin out as the liquid runs low.
• End of life signs: weaker taste, a drier or slightly harsh draw, and less vapour all point to a pod that is nearly finished.
• Pacing: short, spaced puffs keep the coil from overheating and make the pod last longer.

Most kits at this price point are draw activated, which means you simply inhale and there is no button to press. Check the leaflet in your pack to confirm how yours behaves, since we do not want to describe a feature that your unit may handle differently.

Flavour profile across the range

The CL6000 family leans towards fruit, sour and ice profiles, with very little in the way of tobacco or dessert styles. The ten flavours we can describe with confidence are below. These notes are based on the flavour names and the typical way each profile is built, and individual palates always differ a little.

• Blue Razz Lemonade: sweet blue raspberry up front with a tart lemonade finish. It reads like a sparkling fruit drink and is among the more approachable choices for first-time pod users.
• Blueberry Raspberries: a darker, jammier berry blend. Expect the blueberry to lead with the raspberry adding a slightly sharper edge underneath.
• Blueberry Sour Raspberry: the same berry base with a sour twist on the exhale. Good if plain sweet flavours feel flat to you.
• Cherry Ice: sweet cherry followed by a clean cooling sensation. The ice is present but not harsh, which makes it a sensible all-day flavour.
• Fizzy Cherry: cherry with a sherbet-style sparkle. It is sweeter and more playful than Cherry Ice and carries no deliberate menthol chill.
• Lemon and Lime: a crisp citrus soda impression, sharp rather than sugary. It suits people who like their flavours dry and refreshing.
• Pink Lemonade: a rounder, softer lemonade with a hint of red berry sweetness. Gentler than Lemon and Lime.
• Sour Pineapple: bright tropical pineapple with a tangy bite. Tangy flavours can be a little tough on the tongue over a long session, so pace yourself.
• Strawberry Burst: straightforward ripe strawberry sweetness. A safe pick if you want something familiar.
• Watermelon Ice: juicy melon with a cooling finish. Light, clean and easy to vape through a long day.

If you are unsure where to start, the iced fruit options (Cherry Ice and Watermelon Ice) tend to be the least polarising, because the cooling note balances the sweetness. If you enjoy sharper flavours, the sour berry and pineapple options are the ones to try. Anyone sensitive to menthol-style cooling should stay with Strawberry Burst, Fizzy Cherry or Pink Lemonade.

Changing flavour is done by changing the pod. The pods are sold as a matching range, so a pod in a different flavour should slot into the same CL6000 device. Always check that the listing names the CL6000 before ordering, because other SKE lines use different pod formats that will not fit. After switching, take a few gentle puffs to clear the previous flavour before judging the new one.

Design, build and everyday handling

The CL6000 is a compact pod kit made to live in a pocket or bag. We do not publish measurements or weight for it, so rather than guess, we will tell you what to check when it arrives and how to look after it. Look at how firmly the pod seats in the body, because a pod that clicks in squarely is less likely to leak or lose contact. Check that the mouthpiece is clean and that the airflow opening is not blocked. The Crystal name suggests a glossy, translucent look, but finishes vary by colour, so the product photos are the best guide to what you will receive.

For a device you carry every day, build quality shows up in small things rather than in specifications. A pod that wobbles, a charging port that feels loose or a body that creaks under light pressure are all reasons to contact us in the first days of ownership. A solid unit should feel tight, quiet and consistent every time you pull it out of your pocket.

• Pocket carry: keep the kit away from keys and loose coins, which can scratch the body and press on the pod.
• Orientation: carry it mouthpiece up where you can. Liquid sits where gravity puts it, and a kit carried upside down is more likely to seep.
• Heat: never leave it on a car dashboard, near a radiator or in direct summer sun. Heat thins the liquid and stresses the battery.
• Cleaning: wipe the body and mouthpiece with a dry cloth or tissue. Do not rinse the pod under a tap or soak any part of the device.

Because the unit is not a sealed single-use item, there is a little more to look after than with the disposables that used to dominate the shelves. That extra care is the trade for a device you keep, recharge and refit with new pods.

Battery, charging and safe disposal

Our product data does not state a battery capacity for the CL6000, and we are not going to invent one. What we can reason is this: a device built to carry a pod with a 6,000 puff rating has to run for a long time between charges, and kits in this class generally contain a lithium-ion cell somewhere between several hundred and just over a thousand milliamp-hours. Treat that as a general expectation for the category, not a specification of this unit.

In practice, a moderate user will find that the battery goes a few days between charges. A heavy user may need to plug in daily. A good habit is to top the kit up whenever it is convenient, such as at your desk or in the evening, rather than letting it run completely flat each time.

• Charger: use a standard 5V phone-style charger or a computer USB port, with the cable that suits the charging port on your device. Check the port type on your unit before buying a spare cable.
• Supervision: do not charge on a bed, sofa or any soft surface, and do not leave it charging unattended for long periods.
• Temperature: if the unit feels hot while charging, unplug it and let it cool. Do not charge a device that has been left in the cold or the heat until it has returned to room temperature.
• Damage: if the casing is cracked, swollen or smells unusual, stop using it and do not charge it.
• Indicator lights: light patterns for charging, full and low battery differ between kits, so rely on the leaflet in your pack.

When the device or its battery reaches the end of its life, do not put it in a household bin or kerbside recycling. Lithium-ion batteries that are crushed in refuse lorries are a known cause of fires. Take the device to a household waste recycling centre or to a retailer take-back point, and use an online drop-off locator to find the nearest option. Used pods should go the same way where local rules allow, and your council can tell you whether they are accepted in your area.

We would rather you recycle properly than see the device end up in a hedge or a bin. A recharged and well-kept kit also lasts longer, which is better for your wallet as well.

Pod, coil and airflow technology

Inside every pod kit sits a pod holding e-liquid and a coil that heats it. The two common coil styles in this category are mesh and ceramic. A mesh coil spreads heat across a wide area, which usually means quicker warm-up, more even vapour and better flavour retention through the life of the pod. A ceramic coil heats more gently and can deliver a smooth, consistent draw, though flavour can feel a little softer. The product data for the CL6000 does not specify which type it uses, and it does not list a coil resistance, so we will not name one.

What matters more than the label is how the pod behaves over its life. A good coil gives you steady flavour for most of the pod's life, minimal gurgling and no sudden burnt taste while the liquid level is still comfortably high. If you notice the opposite, the first fix is to rest the device and take lighter, shorter puffs, and the second is to replace the pod.

On e-liquid capacity, UK rules cap a single pod or tank at 2ml, and bottles of refill liquid at 10ml. That cap is worth bearing in mind when you read any large puff number. A single 2ml pod cannot hold six thousand average puffs of liquid at normal puff sizes, so a 6,000 puff rating should be read as a manufacturer's marketing figure. The matching pods in this range are listed as prefilled pods and refill containers, so read the listing to see exactly what is supplied and whether refilling is part of how the maker reaches its rating. We recommend setting your expectations a little below the headline and judging the pod by your own use.

• Liquid type: nicotine salt, chosen for smoothness at the higher end of UK strengths.
• Airflow: pod kits in this class are generally fixed-airflow, so you adjust your draw rather than a dial. Draw gently for a cooler, flavour-led pull and slightly harder for more vapour.
• Coil care: never dry-fire a coil by pulling on an empty pod. A burnt coil cannot be fixed, only replaced.

Choosing between 10mg and 20mg nicotine

The CL6000 is available in two strengths, 10mg and 20mg, both expressed per millilitre of e-liquid. The UK limit for nicotine in vape liquid is 20mg per millilitre, which applies to pods and tanks just as it applied to the disposable devices that dominated the market until single-use vapes were banned on 1 June 2025. Our 20mg option sits at the legal ceiling, and the 10mg option sits at half of it.

Nicotine salt e-liquid is absorbed in a way that feels smoother than freebase at the same strength, so a 20mg salt does not have the harsh throat hit of a 20mg freebase. That smoothness is helpful, but it also makes it easy to take more nicotine than you intend, so judge a strength by how you feel, not just by how it tastes.

• Choose 20mg if: you currently smoke a fair number of cigarettes a day, you want a fuller, more satisfying hit from each puff, or you have tried lower strengths and kept reaching for your cigarettes.
• Choose 10mg if: you smoke lightly, you are moving down from a higher strength, you vape frequently through the day and prefer a milder feel, or you simply find 20mg too strong.

A simple rule of thumb is that heavier smokers often start at 20mg and lighter smokers at 10mg, then adjust. If you feel lightheaded, queasy or get a headache after a session, that is a sign that the strength is too high for you, and you should stop, take a break and consider the lower option next time. If you are an adult who wants support with stopping smoking, a pharmacist or your GP can talk through your options.

Strength also interacts with flavour. Sharp, sour and iced profiles can feel more intense at 20mg, since the extra nicotine adds its own bite. If you are choosing a sour flavour like Sour Pineapple or Blueberry Sour Raspberry for the first time, 10mg is a gentle place to try it.

Who the CL6000 suits, and who should skip it

The kit is aimed at adults who already use nicotine and want a low-effort device with a long-lasting pod. Used sensibly, it fits a number of everyday situations.

• Adults switching from smoking: a pod you fit and forget makes the habit easier to manage than a refillable tank.
• Existing vapers who want less hassle: no bottles, no coil changes, and a pod swap takes seconds.
• Commuters and travellers: the compact body slips into a pocket and a single pod can cover days of use for a light-to-moderate vaper.
• Flavour-led buyers: ten fruit, sour and ice options give plenty of choice without any mixing.
• Budget-conscious buyers: a low entry price and a multibuy offer keep upfront cost modest.

It is not for everyone, and it is better to say so plainly. You should skip the CL6000 in the following cases.

• You are under 18 or you do not use nicotine. Nicotine products are for adult users only.
• You are pregnant, breastfeeding or have a heart condition. Speak to a doctor before using any nicotine product.
• You want adjustable power, adjustable airflow or a display. This is a simple fixed-airflow kit, and tinkerers will find it limiting.
• You prefer tobacco or dessert flavours. The family here is fruit-led, with very few options outside fruit, sour and ice.
• You want the lowest cost per millilitre. Refillable tank systems using 10ml bottles are generally cheaper to run over a long period, although they take more effort.
• You want large clouds. Output is moderate by design.

Being honest about the fit matters because a kit that does not suit you ends up in a drawer. If you are weighing it against another device, read the comparison section further down before you decide.

Setting up and using the kit

Setting up the CL6000 takes a couple of minutes. Because designs differ slightly between production batches, always read the leaflet in your pack alongside the steps below.

• Step 1, unbox and inspect: check the body, the pod and the charging port for damage. Remove any protective film, seal or cap from the pod and mouthpiece as instructed.
• Step 2, charge if needed: if your kit arrives with a low battery, charge it fully before first use. Charging first also confirms that the port and cable work.
• Step 3, fit the pod: push the prefilled pod firmly into the body until it seats. It should sit snug with no gap and no movement.
• Step 4, wait a few minutes: a fresh pod needs a short rest so the liquid can soak into the wick. Skipping this is the single most common cause of a burnt first puff.
• Step 5, take gentle first puffs: draw slowly for two to three seconds. If the kit is draw activated, no button is needed. If your unit has one, follow the leaflet.
• Step 6, settle into a rhythm: short, spaced puffs keep the coil cool and the flavour clean.

For technique, hold the vapour in your mouth for a second, then inhale lightly. A hard, fast pull wastes liquid and can make the draw feel hot. Because the strength is nicotine salt, a few puffs often go further than they would with a cigarette, so give it a few minutes before deciding whether you want more.

To swap pods, pull the old pod straight out, do not twist it, and wipe the contacts and the socket with a dry tissue if they look damp. Then fit the new pod and give it the same short rest. If you change flavour, expect the first puffs to taste slightly mixed and give them time to clear.

Store the kit upright where possible, away from heat, and out of reach of children and pets. Nicotine is hazardous if swallowed, and a spare pod is a particular risk, so keep spares in their packaging.

Troubleshooting common problems

Most problems with pod kits have simple causes. Work through the list below before assuming the device is faulty.

• No vapour, no response: check the charge first, then reseat the pod firmly. Dirty or damp contacts can also interrupt the connection, so wipe them gently with a dry tissue.
• Burnt or harsh taste: usually caused by a nearly empty pod, chain vaping that does not give the wick time to refill, or a fresh pod that was not rested. Pause for a few minutes and try gentler puffs. If it persists with a pod you know has liquid, replace the pod.
• Weak flavour: flavour fatigue is common when you use one flavour constantly. Try a different flavour for a day. If the flavour fades alongside less vapour, the pod is close to empty.
• Leaking: wipe the device and pod clean. Heat, pressure changes and squeezing in a pocket can push liquid out, so keep the kit upright and away from warm places. If a pod keeps leaking after being reseated, replace it.
• Gurgling or spitting: condensation has collected in the airflow path. Blow gently back through the mouthpiece, away from your face, or wipe the mouthpiece clean with a tissue.
• Hard draw: check that the mouthpiece and airflow opening are clear. A pod that is not fully seated can also restrict airflow.
• Not charging: try a different cable and a different power source, then check the port for lint or dust. Use a dry wooden toothpick, not a metal tool, to clear debris.
• Flashing light: flashing patterns usually signal low battery or a connection problem, but meanings differ between kits, so check the leaflet.

There are situations where you should stop using the device straight away. If the unit gets very hot in use, swells, makes unusual noises or gives off a burning smell, stop, do not charge it, and contact us. A faulty battery is not something to troubleshoot at home.

If the pod seems to run out far earlier than the 6,000 puff rating suggests, remember that the rating comes from the maker's own testing and that heavy draws use liquid faster. If a pod is clearly defective, contact us with your order number and photos so we can look into it.

Value for money and the multibuy maths

The kit costs £8.99, and the replacement pods in the matching range cost £5.99. The difference of £3.00 is effectively what you pay for the device itself, which is a low entry cost for a rechargeable pod system. After the first pod is finished you only need to buy pods, so your running cost is the pod price.

The offers make the numbers friendlier. Three kits for £25 works out at £8.33 each, which saves £1.97 compared with the £26.97 you would pay buying them one at a time. Pods have their own offer, Buy 4 for £23, which brings each pod down to £5.75 and saves 96p against the £23.96 full price. Both multibuys put your basket over the £20 line, which unlocks free UK delivery.

• Kit alone: £8.99 for a rated 6,000 puffs works out at about £1.50 per 1,000 puffs.
• Kit with the 3 for £25 offer: about £1.39 per 1,000 puffs.
• Pod alone: £5.99 gives about £1.00 per 1,000 puffs.
• Pod with the 4 for £23 offer: about 96p per 1,000 puffs.

These figures assume you reach the rating, which many users will not. If you only get two thirds of the headline figure, divide the savings accordingly and you still end up with a running cost that compares well with most pre-filled pod systems. A single order that combines a kit and spare pods in a flavour you already like is usually the sensible way to buy, because it spreads the delivery threshold across items you will use.

Delivery and genuineness also count towards value. Orders over £20 ship free within the UK, orders placed before 4pm are dispatched the same day, and every product we sell is 100% genuine. That matters in a market where counterfeit devices and mislabelled strengths are a real problem. The price is worth less if the kit is a fake that performs poorly.

If you are the type of person who keeps a spare in a bag and another in a drawer, three kits for £25 is the offer that suits you. If you only want to try one flavour, buy a single kit and judge it before stocking up.

How it compares with the alternatives

The sensible way to judge the CL6000 is against the other ways you could spend a similar amount. Here is a fair look at the main options, including the limits of this kit.

• Other SKE lines: the Crystal 600 range is named for a much smaller puff rating, and the SKE 30K Pro Max pods target far higher puff counts. The 30K Pro Max pods are priced at £8.99 in our shop, the same as a CL6000 kit, so if you want the very longest pod life, look at that range too. The CL6000 sits between them as a mid-to-high rating with a low entry price.
• Established closed-pod systems: brands such as Vuse offer reusable devices that take replaceable pods. These tend to have a more established brand and a long track record, but the choice of flavours and the price per pod differ, so compare both before deciding.
• Other reusable pod kits: brands like Elf Bar and Lost Mary have moved into rechargeable kits since single-use vapes were banned. They compete directly with the CL6000 and may offer different battery sizes, coil designs and flavour lists. We do not claim the CL6000 wins on every count.
• Refillable pod or tank systems: you buy a device once, then fill it from 10ml bottles. Running costs are generally lower and flavour choice is huge, but you take on filling, coil changes and a little learning.

Where the CL6000 does well is simplicity and entry price. You get a pre-filled pod, a modest choice of ten flavours, and a recognisable rating, and you can be vaping within minutes. Where it falls short is flexibility. There is no adjustable airflow, no screen to show battery or liquid level, and no published battery capacity or coil resistance in the data we hold. If those details matter to you, a more specified device is a better fit.

On UK rules, nicotine in vape liquid is capped at 20mg per millilitre, pods and tanks are capped at 2ml, and nicotine products are for people aged 18+. Single-use vapes were banned on 1 June 2025, which is why a rechargeable kit with replaceable pods is the format on offer here. Whichever device you choose, recycle it properly at a household recycling centre or retailer take-back point when it reaches the end of its life.

Our summary is simple. If you want an inexpensive, low-effort pod kit with a long rated life and a good flavour list, the CL6000 is a reasonable choice. If you want maximum control, the lowest running cost or a published technical specification, look elsewhere.