Smok Nfix Pod (Pack of 3) 0.8Ohm

Overview

The Smok Nfix Pod (Pack of 3) 0.8Ohm by Smok in 0.8Ohm at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Smok Nfix Pod (Pack of 3) 0.8Ohm: what you are buying

The Smok Nfix Pod (Pack of 3) 0.8Ohm is a replacement pod multipack for the Smok Nfix pod system. Each pod has a 0.8 ohm mesh coil built into it, so every time you swap a pod you also swap the heating element, which is the part of any vape that wears out first. Three pods in one pack means three fresh coils on the shelf, ready for the moment flavour starts to fade or the wick begins to taste burnt.

This is an accessory listing, not a complete kit. You need an Nfix battery handset to use these pods, and they will not work as a stand-alone vape. If you are new to the Nfix platform, buy a starter kit first and treat this pack as your restock. If you already own the device, a pack of three normally works out cheaper per pod than buying singles, and it stops you running dry halfway through the week.

Smok has been selling pod systems in the UK for years, from pen-style devices like the Novo line to the Nord series and the larger RPM kits. The Nfix sits in the compact, lower-power part of that range. It is aimed at vapers who want a simple refillable pod without temperature menus, app connectivity or adjustable airflow dials. A 0.8 ohm coil gives a looser draw than the 1.0 ohm and higher coils you find in tight mouth-to-lung pods, which makes it suited to people who want a little more vapour while still using nicotine salt or modest-strength freebase liquid.

In this guide we cover what is in the pack, how the pods perform, how the mesh coil works, which nicotine strength to choose, how to prime and fit a pod, what to do when something goes wrong, and how the pack compares with other options on the UK market. Where we give figures such as puff counts or coil life, treat them as realistic estimates based on how 0.8 ohm mesh pods behave in general rather than lab-certified numbers, because your own vaping style changes them a great deal.

• Product type: replacement refillable pods with integrated coil
• Coil resistance: 0.8 ohm mesh
• Pack size: 3 pods
• Intended use: Smok Nfix pod devices, 18+ only

Pack contents and device compatibility

The pack contains three Smok Nfix pods, each with its 0.8 ohm coil already installed. You do not need to build, wrap or wick anything. The pods arrive empty, so you will need your own bottle of e-liquid to fill them. Nothing in the box contains nicotine until you add it yourself.

Compatibility is the question we get asked most often with pod accessories, so it is worth being direct. Smok uses different pod shapes and connector layouts across its ranges, and pods from the Novo, Nord and RPM families are not interchangeable with each other. The Nfix pods are made for the Nfix handset. If you own a different Smok device, do not assume these will fit, even if the pod looks similar in the photo. Check the model name printed on your device or on the original box before ordering.

If you own the Nfix and are unsure whether you are buying the right resistance, look at the label on the pod currently fitted. A 0.8 ohm coil is the standard looser option for this system, and the number is usually printed on the pod base or on the packaging. Different resistances can be offered for the same device, so matching the number is a sensible check if you want the same vape you have been enjoying.

Inside the pack you should expect the following:

• Three sealed Nfix pods with 0.8 ohm mesh coils fitted
• Protective plugs or caps over the pod connections to keep them clean in transit
• Basic safety and recycling information printed on the packaging

Keep the pods in their packaging until you need them. Mesh coils are sensitive to dust, pocket lint and moisture on the contacts, and a clean contact is what gives you a reliable connection to the battery. Store spare pods upright, away from direct heat, and away from keys or coins in a bag or pocket.

Because this is a pod multipack and not a kit, there is no charger, no handset and no bottle of e-liquid included. Factor in that cost if you are starting from nothing.

Performance and vapour delivery at 0.8 ohm

A 0.8 ohm coil sits in a useful middle ground. It is not as restricted as a 1.2 ohm or 1.4 ohm pod, which is built for a cigarette-style tight draw, but it is nowhere near the sub-ohm resistances that need lots of power and produce big clouds. On a low-power pod battery, 0.8 ohm lets the device heat the coil quickly without draining the battery as fast as a very low resistance would.

In practice you get a medium-airy draw that most ex-smokers describe as an easy step up from a tight pod. Vapour production is moderate. It is noticeably more than a 1.0 ohm pod but still discreet enough that you will not fill a room. Throat hit depends heavily on your liquid. A 20mg nicotine salt feels sharper and closer to a cigarette, while a 10mg or lower freebase gives a softer hit and a warmer vapour.

Puff count is the number people always want, and honest answers are always ranges. A 2ml fill at this resistance typically gives somewhere in the region of 250 to 400 puffs, depending on how long each inhale lasts, how high the liquid sits in the pod and what the nicotine strength is. Stronger nicotine tends to be vaped in shorter, fewer puffs, so a high-strength salt fill can last longer than the same volume of low-strength freebase, which many people vape in longer drags.

Consistency from first puff to last is one of the main points of a decent mesh coil. Because mesh spreads heat over a wide surface area, the coil heats evenly and the last third of a fill tastes much like the first. Cheaper wire coils have a tendency to fade or spit as the liquid level drops. If you notice weaker output near the end of a fill, top up before the pod is completely empty to protect the wick.

Warm-up is quick, and the device should deliver vapour almost as soon as you start to draw. If your experience is slow or patchy, the cause is nearly always a poorly seated pod or a coil that has not been primed, both covered in the use and troubleshooting sections below.

• Typical draw style: medium, mouth-to-lung friendly
• Vapour volume: moderate
• Estimated puffs per 2ml fill: roughly 250 to 400
• Suited to: nicotine salts and balanced 50/50 or 60/40 VG/PG liquids

Flavour profile and how liquids taste in the Nfix pod

These pods do not come with a built-in flavour because you choose the e-liquid. That is actually one of the real advantages of a refillable pod system: the flavour you get is the flavour of the bottle you pick, and you can change it whenever you want without buying a new device. A pack of three also gives you a practical way to keep flavours separate, as discussed below.

Mesh coils have a reputation for rendering flavour more faithfully than older single-wire coils, and the 0.8 ohm Nfix pod fits that pattern. Fruit liquids show their top notes clearly, particularly tart ones such as berries, citrus and apple. Ice and menthol blends come across crisp rather than muddy. Dessert and custard liquids work too, although very thick sweet profiles can build up residue on the coil faster than light fruit and mint do, so you may find a dessert pod reaches the end of its useful life sooner.

Because the coil runs at a moderate temperature, the vapour is warm rather than hot. That helps delicate flavours stay intact and avoids the slightly toasted taste you can get when a coil runs too hard. If you are used to the tight, cool draw of a disposable, you may notice the flavour is rounder and slightly more sweet on a 0.8 ohm pod.

A practical tip for anyone who likes variety: once a coil has been used with a strong flavour, some of it stays in the cotton. Strong menthol and cooling agents are the usual culprits. If you want to switch from a heavy menthol to a delicate fruit, fit a fresh pod rather than trying to flush the old one. With three pods in the pack you can dedicate one to mint, one to fruit and one to a dessert or tobacco profile, and swap between them without ghosting.

• Fruit and ice: bright and clear, a natural match for this coil
• Tobacco and nutty blends: rich and smooth, with a warm finish
• Desserts and creams: enjoyable but expect faster coil wear
• Heavy menthol: dedicate a pod to it to avoid flavour carry-over

Design, build quality and pod capacity

The Nfix pod is a compact plastic pod with a transparent or semi-transparent body, so you can see the liquid level at a glance. The coil is housed inside the base, and the pod connects to the handset with a magnetic or push-fit contact arrangement, which is the standard approach for pods in this class. The mouthpiece is part of the pod, so every new pod also means a fresh mouthpiece, which is a small hygiene benefit.

Build quality is what you would expect from an established brand at this price. The plastic is firm without being brittle, the fill port seals well when pressed closed, and the base fits snugly against the device without wobble. As with all plastic pods, avoid leaving them in a hot car or on a radiator, because heat can warp the seals and cause liquid to weep from the airflow slot.

Capacity matters in the UK. Under current UK regulations, refillable tanks and pods on the domestic market are limited to 2ml, and nicotine e-liquid is limited to 20mg/ml in bottles of no more than 10ml. The pods sold for UK customers are therefore a 2ml capacity design, even though some overseas versions of the same system hold more. Do not be surprised if international reviews quote a larger number: the UK pack will be a 2ml pod. It is also the reason bottles of nicotine liquid in this country come in 10ml sizes.

Filling is straightforward. There is a small fill port, usually under a silicone plug, that accepts the standard nozzle on a 10ml bottle. Fill slowly, tilt the pod slightly, and stop just below the top. Overfilling is the leading cause of leaks, because it leaves no air space for pressure to equalise when you inhale.

Because the mouthpiece, tank and coil are a single disposable unit, there is nothing to clean and nothing to unscrew. When a pod is finished you take it out, dispose of it responsibly, and fit the next one.

• UK pod capacity: 2ml per pod
• Fill method: top fill via silicone-sealed port
• Materials: plastic body, silicone seal, metal contacts

Battery, charging and how the pods draw power

The pods themselves have no battery. They draw power from the Nfix handset, so the charging story is really about the device. The Nfix is built around an internal battery in the region of 700mAh, charged over USB. That is a modest capacity, but it is well matched to a 0.8 ohm coil, which does not demand high wattage to produce satisfying vapour. Many users report a full day of normal use from a single charge, although a heavy vaper may want to top up in the afternoon.

A few practical points about charging. Use a standard USB wall adapter or computer port rather than a very high-output fast charger, because small internal batteries are happiest at gentle charge rates. Do not leave the device charging unattended overnight on a soft surface, and stop using any cable that has frayed or loose connectors. If the handset gets noticeably hot while charging, unplug it.

The coil resistance affects how the battery lasts. A low resistance coil pulls more current for a given voltage and empties the battery faster. At 0.8 ohm the Nfix sits at a comfortable level, so the battery lasts longer than it would with a sub-ohm coil but will drain a little faster than it would with a 1.2 ohm pod. If you want to stretch each charge, take shorter puffs and let the device rest between draws.

It is also worth knowing that a failing coil can make the battery appear to be draining quickly. A gunked-up coil makes the device work harder to produce the same vapour. If your battery life has fallen noticeably since you fitted a pod, the pod is often the issue, and swapping to a fresh one from the pack is the quick test.

When the handset eventually reaches the end of its life, do not put it in household rubbish. Lithium batteries can start fires in refuse trucks and sorting plants. Take it to a household waste recycling centre or to a shop with a battery or small electricals drop-off point.

• Typical battery size: around 700mAh in the handset
• Recharge: via USB, using a standard adapter
• Pods: passive, no charging required

Mesh coil technology explained

The defining feature of this pod is the mesh coil. Traditional coils use a length of round wire wound into a spiral around a cotton wick. A mesh coil replaces the spiral with a thin, flat sheet of metal pierced with tiny holes, formed into a shape that sits against the wick. The result is a much larger heating surface in contact with the cotton.

There are several consequences of that design. First, the heat spreads more evenly across the wick, so liquid vaporises more uniformly. That is the main reason mesh coils taste cleaner and rarely produce the dry, scratchy hit that comes from hot spots. Second, mesh warms up quickly, which means less delay between starting to inhale and getting vapour. Third, mesh coils generally last longer than comparable wire coils, because the load is shared across a bigger area rather than concentrated on a thin wire.

A 0.8 ohm rating describes the electrical resistance of the coil. Lower resistance lets more current flow at a given voltage, which means more heat and more vapour. At 0.8 ohm the Nfix mesh sits at the low end of mouth-to-lung territory, firm enough to suit a cigarette-like pull but airy enough to feel relaxed.

Priming is the other half of the technology. The cotton wick needs to be fully soaked before the first puff. If it is not, the mesh heats dry cotton and can scorch it in a single draw, producing a harsh burnt taste that never fully disappears. This is the most avoidable way to ruin a coil, and the steps are in the usage section below.

Finally, a note about coil lifespan. Because the coil is built into the pod, its lifespan is the pod lifespan. As a rough guide, a pod used daily with ordinary e-liquid lasts about one to two weeks. Sweet liquids, high VG blends and chain vaping shorten that, while light users and tobacco-style liquids stretch it. A pack of three therefore covers roughly three to six weeks of regular use, which is a useful way to judge whether a pack suits your budget.

• Coil type: flat mesh, integrated in the pod
• Resistance: 0.8 ohm
• Typical lifespan: roughly 1 to 2 weeks per pod with daily use

Choosing the right nicotine strength

Because the pods are empty, the nicotine strength is entirely up to you. In the UK the legal maximum for nicotine e-liquid is 20mg/ml, and that limit applies to the bottles you buy for refilling just as it does to disposable vapes. You will never see a legitimate UK-market bottle stronger than 20mg/ml, so there is no need to calculate a dilution beyond what is on the label. Weaker liquids of 3mg, 6mg, 10mg and 12mg are widely available if you want to cut down.

The right strength depends on what you are replacing and the type of nicotine in the bottle. Nicotine salt liquids are smoother than freebase at the same strength, so people usually choose them in 10mg or 20mg for pod systems. Freebase liquids have a sharper throat hit and are typically used at 3mg, 6mg or 12mg.

• Heavy smokers (20 or more cigarettes a day): start with a 20mg nicotine salt. If it feels too harsh, drop to 18mg or 15mg if offered.
• Moderate smokers (10 to 20 a day): 10mg to 12mg nicotine salt, or 12mg freebase.
• Light smokers or social smokers: 5mg to 10mg salt, or 3mg to 6mg freebase.
• Vapers cutting down: step down gradually, for example from 20mg to 12mg to 6mg, giving yourself a couple of weeks at each stage.

Match your strength to the coil. A 0.8 ohm pod delivers a fair amount of vapour per puff, so a very high strength liquid may feel overpowering, particularly in freebase. If you find yourself coughing, feeling lightheaded or getting a headache, you are likely taking in too much nicotine for your current setup. Lower the strength before you worry about anything else.

On the other side, if you keep reaching for the device every few minutes and still feel cravings, the strength may be too low. A pod vape should settle your cravings without needing constant use. Adjusting strength is easier than adjusting habits.

If you are not currently a smoker, you should not be starting nicotine. A 0-mg liquid is available in most flavours, and the Nfix pod will work with it just the same.

Who the Smok Nfix 0.8 ohm pod is for

This pack is best matched to adult smokers or existing vapers who already own an Nfix handset and want to keep it running. If you are an ex-smoker who moved to vaping with a pen-style device, the 0.8 ohm coil will feel familiar: not so tight that it strains your cheeks, not so open that it feels like a different hobby.

It also suits people who value simplicity. There is no airflow control to learn, no power adjustment to tinker with, and no coil head to unscrew and prime separately. You fill the pod, click it in, and vape. For commuters, office workers and anyone who wants a device that stays in a pocket, that simplicity is the point.

Reasons you might choose this pack include:

• You own an Nfix and want spare pods so you never run out unexpectedly
• You like to keep separate pods for different flavours
• You want a mouth-to-lung style vape with a moderate draw
• You prefer using your own e-liquid rather than buying pre-filled products
• You want to reduce the number of single-use disposables you throw away

It may not be the right choice if you are after huge clouds, because 0.8 ohm on a compact low-wattage battery is not designed for that. It is also not for anyone who wants a sealed, no-fuss, pre-filled device. If you do not want to handle liquid bottles, a disposable or a pre-filled pod system will suit you better. And if you own a Smok device other than the Nfix, check compatibility before you buy.

A clear statement of the legal position: vaping products are for adults only. You must be 18 or over to buy and use them in the UK. They are intended for adult smokers who want an alternative to cigarettes, and are not recommended for non-smokers or anyone under 18. If you are pregnant, have a heart condition or take regular medication, speak to your GP or pharmacist before using nicotine products.

How to fit, prime and use your Nfix pods

Getting the first fill right does more for the life of a pod than any later habit. Follow these steps with every new pod.

• 1. Check the contacts. Remove the protective cap from the base and make sure the metal contacts look clean and dry.
• 2. Open the fill port. Pull back the silicone plug on the side or top of the pod.
• 3. Fill slowly. Tilt the pod and let liquid run down the inside wall. Stop a few millimetres below the top and do not cover the central airflow tube.
• 4. Close the port. Press the silicone plug back firmly until it sits flush.
• 5. Let it soak. Wait five to ten minutes, standing the pod upright. This lets the cotton absorb liquid fully.
• 6. Fit the pod. Push it into the handset until it clicks or seats firmly.
• 7. Take gentle first puffs. Take two or three short draws with a pause in between, without pressing the fire button hard or chain vaping.

For the firing method, follow the manual that came with your handset. Most compact Smok pod devices in this class fire when you inhale, though some also offer a button.

Everyday habits that make pods last longer:

• Refill when the level drops to about a third, not when it is empty
• Keep puffs short, around two to three seconds, with a pause between
• Avoid chain vaping, which does not give the wick time to resaturate
• Store the device upright when not in use
• Wipe the contacts with a dry cotton bud if you notice poor connection

When a pod comes to the end of its life, which you will recognise by flat or burnt taste that does not clear after refilling, replace it. Never try to burn out or clean a pod with a lighter or a heat gun. Dispose of used pods through the recycling points described later in this guide.

Troubleshooting common Nfix pod problems

Most problems with refillable pods come down to a handful of causes. Here are the ones we see most often and how to fix them.

• Burnt or harsh taste. Usually dry cotton. Either the pod was not left to soak, or you let the liquid run too low. A pod that tastes burnt after proper priming is likely at the end of its life and should be replaced.
• Weak vapour or no vapour. Check the pod is seated fully, the contacts are clean, and there is liquid in the pod. Also confirm the handset is charged. Try a different pod from the pack to rule out a faulty coil.
• Gurgling or spitting. The pod is flooded. Dab the mouthpiece with a tissue, take a few puffs with the device pointing away from you, and avoid overfilling next time. Very thick, high VG liquids can also cause this, so consider a 50/50 blend.
• Leaking from the base. Often caused by overfilling, a poorly closed fill port or temperature changes. Wipe the pod and contacts dry, and make sure the silicone plug is fully seated. If leaking continues on a new pod, contact the seller.
• Device shows an error or flashes. This commonly means a poor connection or a short circuit. Remove the pod, wipe the contacts, and refit it. If the error persists with several pods, the issue may be the handset.
• Pod will not click in. Check you are using an Nfix pod and not one from another Smok range. Compare the shape against your original pod.
• Taste fades quickly. Sweet liquids coat the coil. Try a lighter or more tart profile, or step down the sweetener content.

If you have tried these fixes and a pod still behaves badly, keep the packaging, take a photo of the fault and contact customer service. Pods are consumables, but a pod that is faulty from new is covered under consumer law.

Finally, think about safety. Do not use a damaged or swollen handset, do not carry loose batteries or spare pods against metal objects, and do not leave your device in direct sunlight or a hot vehicle. Spent pods and handsets should go to a proper recycling point, not the household bin.

Value for money, recycling and how the pack compares

Judging value for a pod accessory means looking at cost per week of vaping, not just the shelf price. If a pod lasts about one to two weeks, a pack of three covers a month or more. Compare that with single-use disposables, which in the UK are now banned from sale, and you can see why refillable pods have grown. A disposable replacement of that kind typically ran for a few days at a time; a single refillable pod plus a bottle of liquid usually costs less per day of vaping.

The e-liquid is the larger running cost. A 10ml bottle of nicotine salt gives you about five 2ml fills, which at the puff counts above is somewhere around 1,200 to 2,000 puffs. Pair a multipack of pods with a couple of bottles and you have a sensible, predictable monthly budget.

How does it compare with alternatives? We think a fair comparison looks like this.

• Versus other Smok pod ranges: the Novo and Nord families are broader ranges with more pod and resistance options, but the pods are not cross-compatible. The Nfix is the simpler, more compact choice.
• Versus Vaporesso XROS pods: similar in concept, with a widely stocked pod range and a similar mesh approach. If you already own an XROS, stick with its pods. Neither range is a drop-in replacement for the other.
• Versus Geekvape Wenax pods: comparable in size, with their own resistance options. Choice often comes down to which handset you already have and which flavour profile you prefer.
• Versus Elf Bar and similar pre-filled pod kits: those are convenient but offer fewer flavour choices and cannot be refilled in many cases. Refillable pods give you control over the liquid at the cost of a little more effort.

The honest summary is that this pack is good value for existing Nfix owners and unnecessary for everyone else. Do not buy it unless you have the device.

On recycling, vaping waste should not go in household rubbish. Used pods contain a small coil and residual liquid, and handsets contain lithium batteries. Many UK vape shops and supermarkets offer small electrical recycling drop-off points, and your local household waste recycling centre will accept devices. Empty any remaining liquid into an absorbent paper towel before disposing of a pod, and keep it away from children and pets.