Cool Mint Titan X Prefilled Pods

Overview

The Cool Mint Titan X Prefilled Pods by Titan in Cool Mint at 10mg and 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Titan X Prefilled Pods Cool Mint: what you are buying

Titan X Prefilled Pods Cool Mint are sealed, factory-filled pods made for the Titan X pod system. Each pod contains nicotine salt e-liquid in a mint flavour with a cooling finish, so there is nothing to pour, measure or top up. You click a pod into a compatible Titan X device, vape until the liquid runs low, and replace it with a fresh one. This guide explains what the pods are, what you can reasonably expect from them, and how they fit into the UK market, and it keeps a clear line between what we can state with confidence and what you should confirm on the packaging.

The first thing to be clear about is that this listing is a pod, not a complete vape. A prefilled pod has no battery and no charging port of its own. It only works when it is paired with a compatible Titan X device, which is sold separately unless the product page says otherwise. Pod shapes and connector contacts differ between brands, and sometimes between generations of the same brand, so check the compatibility note on the product page before you order. Buying pods for a device you do not own is the most common avoidable mistake with this kind of product.

Typical specification for a pod of this type:

• Format: sealed, prefilled, non-refillable pod for a rechargeable pod device
• E-liquid capacity: 2ml, the maximum tank size allowed for pods and refillable tanks sold in the UK
• E-liquid type: nicotine salt formulation, with the strength you select shown in the variant picker on the product page
• Maximum strength: the UK legal ceiling for nicotine-containing e-liquid is 20mg/ml
• Coil: a small built-in mesh or low-resistance coil, usually somewhere around 1.0 ohm, which is not replaceable
• Flavour: Cool Mint, a clean mint with a cooling finish
• Typical puff count: in the region of 500 to 700 puffs per 2ml pod, depending on how you draw
• Battery: none in the pod; the battery sits in the device

These figures reflect what is normal for 2ml prefilled pods rather than a guarantee about every unit, so treat anything printed on the pack as the final word. We would rather give you honest ranges than inflated claims, and the rest of this guide is written in the same spirit.

Because the device is reusable and only the pod is replaced, this is a different product category from a single-use disposable. Single-use vapes were banned from sale across the UK from 1 June 2025, so a system built around a rechargeable device and replaceable pods sits on the legal side of that line. The nicotine in any UK product is still capped at 20mg/ml, and this item is for adults aged 18 and over only. It contains nicotine, which is addictive, and it is intended for smokers and existing vapers, not for anyone who has never used nicotine.

Performance and puff delivery

The headline figure for any prefilled pod is how many puffs it gives you. With a 2ml reservoir, Titan X Cool Mint pods land in the same bracket as most other pods of this size, which is roughly 500 to 700 puffs when drawn at a steady, unhurried pace. Manufacturers tend to measure puff counts with short, machine-controlled draws, and real people do not vape like machines. Long, hard draws use liquid faster and can cut the figure noticeably, while short, gentle draws can stretch a pod further than you might expect. Treat the number as a way to compare pods with each other, not as a promise.

As a rough guide to how long one pod lasts in daily use:

• Light use (a few puffs here and there, mostly in the evening): a single pod may last three to five days.
• Moderate use (steady vaping through a working day): expect one pod to last one to two days.
• Heavy use (frequent puffing in place of a pack-a-day habit): a pod may last a day or a little less.

The draw on a system like this is tight and restricted, closer to pulling on a cigarette than to the wide-open airflow of a large sub-ohm kit. That is deliberate. A restricted draw suits the lower-powered nicotine salt liquid inside the pod, keeps vapour production modest and keeps the whole thing discreet. If you are after big clouds, this is not that kind of product, and it is better to know before buying than after.

Nicotine salt liquid delivers its hit smoothly, so a given strength feels less harsh on the throat than the same strength of traditional freebase liquid would. In practice you can satisfy a craving with fewer, smaller puffs. It also means the higher strengths can feel stronger than people expect, which is covered in the nicotine section further down.

Performance should stay consistent across the life of the pod. Flavour and vapour should be steady from the first puff until the liquid gets low. As the pod nears empty you may notice the vapour thinning, the flavour fading or the throat hit turning slightly sharper as the wick has less liquid to work with. Those are signs it is time to swap, not signs of a fault, and pushing on past that point is how you end up with a burnt taste.

Vapour temperature is usually on the cool to warm side, which suits a mint flavour well because the cooling effect is not fighting against hot vapour. If the vapour ever feels hot, the pod is probably running dry or the device is struggling with a poor connection, and it is worth stopping to check rather than continuing.

Cool Mint flavour profile

Cool Mint sits in the fresh, uncomplicated corner of the flavour range. Think of it as a clean mint with a cooling sensation on the inhale and a lingering coolness on the exhale, rather than a sweet dessert flavour with mint added as a garnish. The maker does not publish a breakdown of the exact mint character, so the following is a description of the profile type rather than a recipe. Taste is personal, and what reads as crisp to one person can read as sharp to another.

What you can expect to notice:

• Inhale: a bright, cool mint note that arrives quickly, with the coolness felt mostly at the back of the mouth and the top of the throat.
• Exhale: the coolness lingers and the mint softens slightly, leaving a light, clean aftertaste.
• Sweetness: low to moderate. There is usually a touch of sweetness to round the edges, but it is not a sugary vape.
• Cooling level: noticeable without being icy. It is closer to a strong mint sweet than to a freezer-burn menthol blast.

The difference between mint and menthol matters if you are choosing between flavours. Mint tends to taste of the plant itself, green and fresh, with a gentle cooling effect. Menthol is more about the sensation than the taste, a cold, slightly medicinal edge. A product called Cool Mint will usually lean towards the mint side with some added cooling, but if you want a stronger icy kick you may prefer a dedicated menthol or double-ice variant.

One practical advantage of mint flavours is that they hold up well over long sessions. Fruit flavours can start to feel cloying after a few hundred puffs, a phenomenon vapers sometimes call flavour fatigue. A cool mint stays fresh on the palate for longer, which is why many people who vape all day gravitate towards mint and menthol profiles. It is also a flavour that many people reach for after a meal or a coffee, when something sweet feels like too much.

Flavour strength is steady through the life of the pod. If you move from a fruit flavour to a mint, give your palate a few minutes to adjust, because strong sweet flavours can dull your sense of taste for a short while. If a mint pod seems weaker than you remember, it is often your tastebuds, not the pod, and a break or a drink of water usually resets things.

Cold weather can mute flavour slightly because the liquid is thicker and vaporises less readily. If you carry the device outside in winter, keep it in an inside pocket for a few minutes before use and the taste will come back to normal.

Design and build quality

A prefilled pod is a simple object, and most of the build quality that matters is hidden inside it. The visible part is a small plastic cartridge with a mouthpiece at one end and a connector at the other. The liquid reservoir takes up most of the body, the coil and wick sit in the base, and a pair of contacts or a magnetic connection links the pod to the device. When everything is made well, you click the pod in, it sits firmly, and it does not rattle or leak.

Things worth checking when your pods arrive:

• Seals and film: pods are shipped with protective seals over the mouthpiece and sometimes over the base. Remove them before use, and do not poke anything into the airflow holes.
• Liquid level: a visible window usually shows how much liquid remains. A new pod should look full or close to it, with a small air gap at the top.
• Fit: the pod should seat fully in the device with a firm click. If it feels loose or needs forcing, stop and check that it is the correct pod for your device.
• Surface condition: a little condensation is normal, but liquid pooling at the base on a brand new pod suggests a fault and is worth reporting.

The mouthpiece on pods of this type is usually a gently flattened shape that is comfortable between the lips. It is made of plastic rather than metal, so it will not heat up, and it is easy to wipe clean with a dry tissue. Do not wash the pod or run it under water, because moisture in the contacts or the airflow channel can stop it working.

These pods are designed to be non-refillable. There is no fill port, and attempting to prise one open to top it up will damage the seal, risk leaks and may ruin the coil. If you want to refill your own liquid, a refillable pod system is the right tool. A sealed pod is the right tool when you want convenience and no mess.

For storage, keep spare pods upright, in their packaging if possible, away from direct sunlight and away from radiators or hot cars. Heat thins the liquid and raises the pressure in the pod, which is the leading cause of leaks in transit. Because pods contain nicotine, keep them out of reach of children and pets at all times.

Weight and size are small, which is part of the appeal. A device with a pod fitted is pocket-friendly and fairly discreet, and pods themselves are light enough to carry a couple of spares without noticing them.

Battery and charging

The pod has no battery, so there is nothing to charge on the pod itself. Power comes from the Titan X device it clicks into. We do not list an exact battery capacity for the device here, because it depends on which Titan X model you own, and the manufacturer's instructions are the reliable source. As a general reference point, rechargeable pod devices in this class commonly carry batteries in the range of a few hundred to around a thousand milliamp hours (mAh), and the larger the capacity, the more pods you can get through between charges.

How charging usually works for a device of this type:

• Charging is normally via a USB-C port on the base or side of the device.
• A standard 5V phone charger or a computer USB port is generally suitable. Avoid unbranded or damaged cables.
• An indicator light typically shows when charging is in progress and when the battery is full.
• A full charge commonly takes somewhere between half an hour and a couple of hours, depending on battery size.

Most devices of this kind are draw-activated, meaning you do not press a button. You simply inhale and the battery fires the coil. That keeps things simple but also means the battery is only used while you are actually puffing, so a moderate user can often go a full day or more between charges. A heavy user may charge daily.

Sensible battery habits:

• Charge before the battery is completely flat if you can. Topping up a little and often is gentler than running it down every time.
• Do not leave the device charging unattended for long periods, and never charge it under a pillow or on a soft surface where heat cannot escape.
• Do not use the device while it is charging unless the manufacturer says it is designed for that. Using a pod system while plugged in can put extra strain on the battery.
• Keep the device out of hot cars and direct sun, since heat shortens battery life.
• If the battery swells, becomes very hot, smells odd or leaks, stop using it and dispose of it safely.

When a device reaches the end of its life, do not put it in general waste or normal kerbside recycling. Lithium batteries can cause fires in bin lorries and recycling plants. Take it to a vape-recycling drop-off point instead. Many UK vape shops and some supermarkets take back used vape products, and your local council recycling centre will usually have a small-electricals bin. The Recycle Your Electricals postcode locator will show you the nearest one.

Coil and mesh technology

Inside the base of each pod is a small coil and a cotton wick. The coil heats up when you draw, the wick delivers liquid to it, and the liquid turns to vapour. In pods of this type the coil is built in and cannot be changed, which is why the pod is treated as a consumable. When the liquid is gone, the coil has also done most of the work it was designed to do, and the whole assembly is replaced together.

Why mesh coils are common in modern pods:

• Surface area: a mesh coil is a flat or curved screen of fine metal with a large contact area against the wick. More surface area means the liquid is heated more evenly.
• Flavour consistency: even heating tends to give steadier flavour from the first puff to the last, with fewer harsh or scorched moments.
• Fast ramp-up: mesh reaches working temperature quickly, so the vapour starts as soon as you inhale.
• Durability: a mesh coil typically copes better with sustained use than a simple wire coil of the same size.

The resistance of the coil, measured in ohms, is usually in the region of 1.0 ohm for a pod like this, though we cannot confirm the exact value for every batch. A resistance around that level pairs with a moderate output from the device and with nicotine salt liquid, giving a warm, tight draw. Lower resistances produce more vapour and a looser draw but use more battery and more liquid.

Because the coil is matched to the liquid inside, the pod is tuned as a package. The wick is sized to supply the right amount of e-liquid at the intended power, and the viscosity of the liquid is chosen so it flows into the wick at the right rate. That is one reason we advise against mixing and matching parts or trying to refill. The pod works because all of its elements were designed to work together.

Looking after the coil during use:

• Take a few gentle puffs before settling into a steady rhythm on a new pod, so the wick saturates.
• Avoid chain vaping, where you take many long puffs in quick succession. The wick cannot keep up and the coil can start to scorch.
• Do not keep using a pod that tastes burnt. That taste means the wick is dry, and continuing to draw will only make it worse.
• Replace the pod as soon as the flavour fades or the liquid level drops close to empty.

Nothing about the coil needs cleaning or maintenance. If you treat it gently and swap the pod at the right time, the coil does its job for as long as the liquid lasts.

Nicotine strength guidance and UK rules

Choosing the right nicotine strength is the decision that most affects whether you enjoy a pod system, so it is worth getting right. The UK limits nicotine in e-liquid to 20mg/ml, equivalent to 2 per cent. That ceiling applies across the board, including pods like these and the e-liquid in any other product sold for vaping. The old single-use disposables were held to the same 20mg cap before they were banned from sale on 1 June 2025, and a reusable pod system is not covered by that ban.

Titan X Prefilled Pods Cool Mint are made with nicotine salts, which are formulated to be smooth at higher strengths. That is a benefit if you are moving away from smoking, but it also means a strength that looks modest on paper can feel stronger than the same number would in a traditional freebase liquid. The variant selector on the product page shows the strengths we stock, and the packaging shows the exact figure.

A cautious starting point, not medical advice:

• 20mg/ml: generally aimed at people coming off a heavier smoking habit, often a pack a day or close to it. It delivers a firm throat hit and satisfies cravings quickly.
• 10mg to 12mg/ml: a common middle ground for lighter or social smokers, and for people who find 20mg harsh or who feel lightheaded on it.
• 5mg/ml and below: better suited to people who are already cutting down, or to occasional use where you want only a light nicotine level.

Signs a strength is too high include dizziness, nausea, a racing heartbeat, a sore throat or a tendency to feel unwell after a few puffs. If that happens, stop and consider dropping a step. Signs it is too low include still reaching for cigarettes, taking many more puffs than you expected and feeling unsatisfied. If you are unsure, it is easier to start one step lower and move up than to start too high.

The more you vape, the more nicotine you take in, and puff counts matter here. Someone using a full 2ml pod a day at 20mg/ml is taking in a substantial amount of nicotine. The pod holds roughly 40mg of nicotine in total at 20mg/ml, though how much reaches your body depends on how you vape.

Nicotine is addictive, and the products are for adults who already smoke or vape. If your goal is to stop altogether, NHS stop smoking services and your local pharmacist can offer support, and many people step down through the strengths over time. Never vape if you are pregnant, have a heart condition or have been advised against nicotine without first speaking to a healthcare professional.

Who Titan X Cool Mint pods are for

These pods suit a fairly specific group of people, and it helps to be honest about who that is. They are a good match for adult smokers and existing vapers who already own a compatible Titan X device and want a clean, fresh flavour that does not become tiresome after a few hours.

You are likely to get on with these pods if:

• You are a smoker looking for a flavour that feels closer to menthol or mint cigarettes than to a fruit drink.
• You already use the Titan X device and want to try a different flavour without buying a whole new kit.
• You prefer a tight, cigarette-like draw to open airflow and big clouds.
• You want something low-effort, with no bottles, no coils to fit and no refilling.
• You vape through the day and want a flavour that stays palatable rather than cloying.

You may want to look elsewhere if:

• You do not own a compatible device. The pod is useless without one, and you would need to buy the device first.
• You like large, dense clouds. Pod systems are designed for modest vapour.
• You enjoy sweet, dessert or candy flavours. Mint will feel thin if you are looking for sweetness.
• You want the lowest possible running cost and are happy to refill your own tank. Refillable kits cost less per millilitre.
• You have never smoked or vaped. Nicotine is addictive and these products are not intended for people who do not already use it.

They are also not for anyone under 18, and we apply an age check on delivery. If you are pregnant, breastfeeding or have a medical condition, speak to a healthcare professional before using nicotine products.

For smokers, the main reason to consider a pod system is to replace cigarettes entirely. Switching fully is the point. Mixing cigarettes and vaping may leave you using more nicotine overall without removing the main health risks of smoking, so if you choose to switch, give it a genuine run for a couple of weeks and use a nicotine strength that actually satisfies you.

A mint flavour makes that switch easier for some people, because it avoids the sugary notes that can feel unfamiliar to someone who has smoked for years. Others prefer a tobacco flavour for exactly that reason, so if mint does not work for you, trying a different profile is reasonable.

How to fit and use your pods

Using prefilled pods is straightforward, and it takes under a minute to get started. Follow the steps below, and always defer to the leaflet inside the pack if it differs from our general guidance.

• Step 1, confirm compatibility. Check that the pod is listed for your Titan X device. If the shape or the contacts differ, do not force it.
• Step 2, charge the device. Make sure the battery has some charge before you start. A flat device will not fire the coil, and a new user often mistakes that for a faulty pod.
• Step 3, unwrap the pod. Remove any film, plug or seal from the mouthpiece and base. Keep the pod upright while you do this, so the liquid stays where it belongs.
• Step 4, click it in. Line the pod up with the device and push gently until it seats with a firm click or a snug magnetic hold.
• Step 5, let it settle. Wait a minute or two so the liquid can soak into the wick. Skipping this is the most common reason a fresh pod tastes thin or dry on the first puffs.
• Step 6, take a few gentle draws. Inhale slowly for two to three seconds, rest, then continue. Most pods of this type are meant for mouth-to-lung use, where you draw the vapour into your mouth first and then inhale it.
• Step 7, swap when it fades. When the flavour thins, the vapour weakens or the liquid window looks nearly empty, click the pod out and fit a new one.

Technique tips that make a real difference:

• Pace yourself. A pause of 20 to 30 seconds between puffs lets the wick refill and keeps the coil from overheating.
• Keep the device upright when you are not using it. Lying a device on its side with a pod fitted can let liquid pool near the contacts.
• Do not blow back through the mouthpiece. This can push liquid into the airflow channel and cause gurgling.
• If you switch flavours, remove the old pod rather than leaving it partly seated, and store it upright in its own packaging.

Disposing of used pods. A spent pod still contains a small amount of liquid and a coil, and it counts as waste electrical or hazardous material rather than ordinary rubbish. Do not put it in your household bin or kerbside recycling. Take used pods to a vape-recycling drop-off point, such as the collection bins found in many UK vape shops, some supermarkets and council recycling centres. If a shop sells vape products, it is generally expected to accept used ones back. The Recycle Your Electricals postcode locator is a quick way to find the nearest one.

Troubleshooting common issues

Most problems with prefilled pods fall into a short list of causes, and almost all of them can be sorted in a minute or two. Work through the points below before assuming a pod is faulty, and if a pod really is damaged on arrival, see the returns information in the FAQs.

• No vapour or no response when you draw. Check the device battery first, because a flat battery is the leading cause. Then check that the pod is fully seated. Remove it, look at the contacts for any residue and click it back in firmly. If you have a draw-activated device, make sure the airflow holes are not blocked by tape or a thumb.
• Thin or weak flavour on a new pod. Give the wick a minute or two to soak up liquid, then take a few gentle puffs. If it improves, you simply tried to vape it too soon. If the flavour fades mid-pod, the liquid may be running low, so look at the window.
• Burnt or acrid taste. This almost always means the wick is dry, either because the pod is nearly empty or because you have been chain vaping. Stop, replace the pod and slow the pace. A burnt coil does not recover.
• Leaking from the base or mouthpiece. Leaks are usually caused by heat, pressure changes or storing the pod on its side. Wipe the device and contacts dry with a tissue, store spare pods upright in a cool place, and avoid leaving them in a hot car. A pod that leaks straight out of the box should be reported.
• Gurgling or spitting. Condensation has built up in the airflow channel. Remove the pod, tap it gently on a tissue, wait a moment and take a few softer draws. Avoid blowing into the mouthpiece.
• Device does not recognise the pod. Clean the contacts gently with a dry cotton bud, then reseat the pod. If it still fails, try a different pod from the same pack to find out whether the fault lies with the pod or the device.
• Flavour seems to disappear after a while. This is often your palate rather than the pod. Switching between strong flavours or vaping for a long stretch dulls taste for a time. Rinse with water, have a short break and try again.
• Sore throat or dry mouth. A higher nicotine strength, a dry coil or simply not drinking enough water can cause this. Sip water regularly, consider a lower strength and avoid very long draws.
• Battery drains quickly. Check the device is not firing accidentally in a pocket or bag and that the cable and charger are working properly. Older devices lose capacity with age, and a degraded battery may need replacing.

A final point on safety. If a pod or device ever becomes unusually hot, swells, hisses, smells of burning or leaks heavily, stop using it straight away, keep it away from anything flammable and dispose of it via a recycling drop-off point rather than putting it in a bin.

Value for money

Judging value on a prefilled pod comes down to two things, what each puff costs and what you are comparing it with. Pod prices vary by pack size and by retailer, so we have not printed a fixed figure here. The price on the product page is the current one, and the arithmetic below lets you work out the real cost for yourself.

To estimate the cost per puff, divide the pod price by the number of puffs you actually get. As an illustration only, a pod costing £4 that gives around 600 puffs works out to about two-thirds of a penny per puff. If you find you only get 400 puffs because you draw hard, the same pod costs a little over a penny per puff. Multiply that by the number of puffs you take in a day to see your daily spend.

How prefilled pods compare on cost:

• Against cigarettes: a pack of 20 cigarettes costs well over £15 in most UK shops, and a daily smoker spends a large sum across a month. A pod habit is usually far cheaper, even after you count the cost of the device.
• Against refillable pods and tanks: filling your own device from a bottle costs less per millilitre. The trade-off is the effort, the occasional spills and the need to replace coils.
• Against the old single-use disposables: those are gone from sale, and a reusable device with replaceable pods usually costs less over time because you are not throwing away a battery every few days.

There are a few ways to keep the running cost down. Buy multi-pod packs rather than single pods where the price per pod is lower, and check for bundles on our deals pages. Take shorter draws and pause between puffs so each pod lasts longer. Avoid heat, which makes pods leak and wastes liquid. And match the nicotine strength to your needs, because a strength that genuinely satisfies you means fewer extra puffs through the day.

The value picture changes with how much you vape. Light users see a pod last several days and spend very little. Heavy users may get through a pod a day, and for them it is worth comparing the cost against a refillable system, which can be cheaper per day at the price of more effort.

Value also includes what you do not pay for, such as time spent mixing, buying coils or cleaning tanks. If simplicity is worth something to you, a prefilled pod earns its price by asking nothing of you but a click.

How Titan X Cool Mint compares with the alternatives

A fair comparison means admitting where other products do things better. Here is how these pods stack up against the kinds of alternatives you are likely to consider.

Against larger closed pod systems. Established prefilled pod systems such as Vuse ePod, along with the Elfa-style pods from other brands, tend to have wider ranges, broader high-street availability and longer track records. Titan X may offer a narrower choice of flavours, so check that the ones you want are in stock before committing to the device. Where Titan X can compete is on price, on flavour variety within its own line and on the quality of individual flavours, which are best judged by trying them.

Against refillable pod kits. Open pods that you fill from a bottle give you enormous flavour choice and lower running costs. In return you accept refilling, occasional leaks and coil swaps. If you want to start with minimal effort, prefilled is easier. If you enjoy tinkering or vape a lot, refillable offers more flexibility and better value per millilitre.

Against other mint and menthol pods. Mint is a staple across the market, and the differences between brands come down to sweetness, cooling strength and how natural the mint tastes. Titan X Cool Mint sits on the clean, moderately cool side. If you want a stronger icy blast, look at menthol or double-ice options. If you want less cooling and a softer taste, a spearmint-led or mint-and-fruit blend may suit you better.

Against tobacco flavours. If you are coming off cigarettes, a tobacco-style pod can feel more familiar at first, while mint and menthol offer a cleaner, fresher alternative. Neither is better in itself, and some people find that a fresher flavour makes it easier to leave cigarettes behind because it does not remind them of smoking.

Against other Titan flavours. If you like the Titan X device but find Cool Mint a bit sharp, the range includes fruit and ice flavours, so you can swap without changing anything else. Because pods for the same device are interchangeable, trying a second flavour costs only the price of the pod.

The honest summary. These pods are a sensible choice for an adult smoker or existing vaper who owns a Titan X device and wants a clean, steady mint. They are not the most economical way to vape, they will not produce big clouds, and they do nothing at all without a compatible device. If those limits fit your needs, they are a straightforward way to keep a device supplied. If they do not, a refillable system or a different pod ecosystem may serve you better. Whichever route you take, recycle used pods and devices at a proper drop-off point and keep every nicotine product away from children.