Vaporesso Luxe X2 Pod Vape Kit

Overview

The Vaporesso Luxe X2 Pod Vape Kit by Vaporesso across 8 flavours at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Vaporesso Luxe X2 pod kit overview

The Vaporesso Luxe X2 Pod Vape Kit is a refillable pod system for adult vapers who want more control than a basic draw-and-go device offers, without moving up to a full box mod and a drawer full of spare parts. It combines a built-in rechargeable battery of around 1500mAh with adjustable output of up to roughly 40W, and it runs on Vaporesso's mesh-coil pod cartridges that you fill yourself from a bottle of e-liquid. In practical terms it is a pod kit that can behave gently for mouth-to-lung (MTL) vaping, and can also be pushed harder for a looser, more open draw, depending on the pod, the airflow setting and the power you choose.

This page is written for UK vapers, so it covers what matters in this market. UK nicotine e-liquid is capped at 20mg/ml, refillable tanks and pods are limited to 2ml, and nicotine bottles are limited to 10ml. Disposable vapes were banned from sale across the UK from June 2025, which has pushed a lot of former disposable users towards refillable kits like this one. A rechargeable, refillable device with replaceable pods is a different product category from a single-use vape, and it generates far less waste over its lifetime when it is looked after properly.

A few honest caveats before we go further. Specifications such as battery capacity, maximum wattage and pod volume are based on the manufacturer's published figures for this model family and can vary slightly between production batches, regional versions and pod types. UK-market pods are 2ml, whereas the same device sold elsewhere can ship with a larger pod. Always check the packaging and the leaflet in your box for the exact figures that apply to the unit you receive.

A typical kit includes the Luxe X2 device, at least one pod, a USB-C charging cable and the paperwork. E-liquid is not included, and spare pods are sold separately, so check the listing for what your chosen bundle contains. Our range currently lists nine variants of this kit, which typically differ by colourway rather than by anything inside the device. The sections below go through performance, flavour, design, battery, coil technology, nicotine strength, who it suits, how to use it, troubleshooting, value for money and how it compares with similar devices.

• Type: refillable pod kit with a built-in battery
• Battery: about 1500mAh, USB-C charging
• Output: adjustable, up to around 40W
• Pod capacity (UK): 2ml, filled from a bottle of e-liquid
• Coil type: mesh coil inside the pod
• Best suited to: adults moving from disposables, or from basic pod kits, who want adjustable power

Performance and puff delivery

Performance on a pod kit comes down to three things working together: the power the battery can deliver, the resistance and surface area of the coil, and the amount of air that mixes with the vapour. The Luxe X2 gives you a useful degree of control over the first and third, while the coil side is decided by which pod you fit. That is the main reason people choose it over a fixed-output pod device. You can set it to suit the liquid and the way you vape, instead of accepting whatever the manufacturer picked.

At the low end of its range, around 10W to 18W, the Luxe X2 delivers a cool, restrained draw that suits tight, mouth-to-lung inhales and nicotine salt e-liquids at 10mg/ml or 20mg/ml. Vapour is modest, throat hit is controlled and the pod uses liquid slowly. In the middle of the range, roughly 18W to 28W, you get a warmer, denser vapour with more flavour, which is where most people will settle once they have found a pod they like. At the top of the range, up to roughly 40W, the device is capable of a large, warm vapour, but you should expect the battery to drain much faster and the pod to empty quickly. Higher power is also not automatically better with the highest-nicotine liquids, because the throat hit becomes harsh and you will use nicotine faster than you intend to.

As a rough guide to puff count, a 2ml pod at moderate power generally lasts somewhere between 250 and 450 draws, depending on your puff length, the wattage you run and how thick your e-liquid is. Treat these as estimates rather than a promise. Liquids with a higher proportion of vegetable glycerine (VG) are thicker and can wick more slowly, which matters at higher wattages, while 50/50 and nicotine salt liquids wick quickly and cope better with the lower to middle power settings.

Draw response is quick on a healthy pod. You should not need to wait for the coil to wake up, and vapour should arrive on the first second of the puff. If you notice a delay, a gurgle or a dry taste, the usual causes are a freshly filled pod that has not soaked, a thick liquid, or a coil near the end of its life, and we cover those fixes in the troubleshooting section.

• 10W to 18W: cool, tight draw, suits nicotine salts and MTL inhales
• 18W to 28W: warm, fuller vapour, the usual sweet spot for flavour
• 28W to 40W: large, warm vapour, short battery life, faster liquid use
• Typical pod life per 2ml fill: roughly 250 to 450 draws, depending on settings

Flavour: what the Luxe X2 does with different e-liquids

The Luxe X2 does not come with a flavour of its own, because it is a refillable kit rather than a pre-filled disposable. The flavour you taste is entirely down to the e-liquid you put in the pod, and the device's job is to deliver it cleanly. Mesh coils are generally good at that, since the larger heating surface warms the liquid evenly instead of scorching one narrow spot, and that tends to give a rounder, more accurate taste than a basic cotton-and-wire coil. Flavour clarity is one of the practical reasons mesh pods are popular.

Here are eight e-liquid styles that tend to suit this kind of device, and the settings that usually work for each:

• Blue raspberry ice: a popular choice for former disposable users. Run it in the lower to middle power range so the cooling agent does not turn harsh.
• Strawberry kiwi: a sweet, juicy fruit blend that stays bright at moderate power. Very high wattage can make it taste jammy and flat.
• Mango peach: a rich, thick fruit profile. Mid-power settings suit it well, though thicker, higher-VG versions need a fully soaked pod.
• Cola: carbonated flavours can taste thin at low power and sharp at high power, so the middle of the range is the safer place to start.
• Menthol: a simple, clean option that does well at low to mid power and suits anyone who wants an alternative to tobacco-style flavours.
• Spearmint: milder than menthol and easy on the throat, which makes it a good everyday option at lower wattages.
• Vanilla custard: a dessert profile that benefits from slightly warmer settings, as the creamy notes come through more at mid-range power.
• Classic tobacco: subtle profiles can be tricky on a mesh coil, since the flavour is delicate. Try 12W to 18W and a nicotine salt strength you are comfortable with.

A practical tip is to use one liquid per pod. Switching flavours in the same pod leaves residue behind, and mixing a menthol with a dessert flavour rarely ends well. Pods are inexpensive relative to the cost of a bottle you cannot finish because it tastes wrong. If you like to rotate flavours through the week, buy a small stock of spare pods and label them with a marker, or keep one pod for fruit, one for mint and one for tobacco.

Remember that the legal limits apply to the liquid you choose. Nicotine e-liquid on sale in the UK cannot be stronger than 20mg/ml, and bottles of nicotine liquid cannot be larger than 10ml. If you buy a larger shortfill bottle, it will be nicotine-free and you would add a nicotine shot yourself, which changes the strength of the mix.

Design and build quality

The Luxe X2 is a compact, pocketable device that sits in the hand comfortably, with a body that is slim enough to slide into a jacket pocket without catching, yet long enough to hold the pod securely. The casing is a metal alloy body with a coating that gives it a smooth, slightly soft finish rather than a glossy one, which hides fingerprints better than a polished surface does. The range's colourways vary, so choose the one that suits your taste, bearing in mind that darker finishes tend to show scratches less than lighter ones.

The pod clicks into the top of the device with a firm magnetic or mechanical connection, depending on the revision, and you should hear and feel it seat. A secure pod seating matters, because a loose pod can cause weak vapour, liquid seepage around the connection or intermittent firing. If your pod ever feels wobbly, remove it, check that the contacts are clean and dry, and push it back in firmly.

Controls are simple. A firing button sits on the front or side of the device, and depending on the mode, the device can also respond to the draw. A small indicator, whether that is a light or a display on your unit, shows battery level and output. Some units allow you to change the power with button presses, and the manual in the box explains the exact sequence for your revision, so it is worth reading the leaflet once. Adjustable airflow, where fitted, lets you open or close the air intake to change the draw from tight to airy.

Build quality is what you would expect from a long-established manufacturer. Pod seals are tight when new, the USB-C port is a standard connector rather than a proprietary plug, and the weight of the device feels reassuring without being heavy. As with any pocket device, treat it sensibly. Do not keep it loose in a bag with keys and coins, and do not leave it in a hot car, since heat is hard on built-in batteries and on e-liquid.

• Body: compact alloy casing with a soft-touch style finish
• Pod fit: click-in pod, should seat firmly with no wobble
• Charging port: USB-C, standard connector
• Controls: firing button with adjustable power, airflow control on supported pods
• Care: keep the contacts clean and dry, and avoid heat and pocket lint

Battery life and charging

The Luxe X2 uses a built-in lithium-ion battery of around 1500mAh. That is a sensible size for a pod kit of this power class, since it is big enough to get most moderate users through a day without feeling bulky. Because the battery is built in, you cannot swap it out the way you can on a mod that takes 18650 cells, and when it eventually wears out, the device has reached the end of its life, so it is worth looking after it properly.

As a back-of-envelope guide, 1500mAh at a nominal 3.7V holds about 5.5Wh of energy. At around 20W with a three-second draw, each puff uses roughly 60 joules, which works out at something in the region of 250 to 350 draws per charge once you allow for losses. At 35W to 40W, you are looking at roughly half that, so about 120 to 180 puffs. These are estimates, not guarantees, and real-world results vary with temperature, battery age and how long you hold the button. In practice, a moderate user running the device at 15W to 25W should expect to charge roughly once a day, while a heavy user running higher power may need to top up during the day.

Charging is by USB-C, which is a significant convenience because the same cable that charges your phone will usually work. A full charge from empty generally takes in the region of an hour to an hour and a half with a suitable charger. Using a weak charger or a low-output USB port, for instance on an old laptop, will take noticeably longer. For safety, use a good-quality charger, avoid charging under a pillow or on a soft surface, and do not leave the device charging unattended overnight if you can help it.

Battery longevity depends on how you treat it. Lithium cells last longer if you avoid running them to zero repeatedly, avoid leaving them hot, and avoid storing them fully drained for long periods. If the device ever swells, becomes unusually hot while charging, or smells of burning, stop using it, unplug it, and take it to a recycling point rather than continuing to use it.

• Battery: built-in, around 1500mAh
• Estimated draws per charge at about 20W: roughly 250 to 350
• Estimated draws per charge at about 40W: roughly 120 to 180
• Charging time: roughly 1 to 1.5 hours with a suitable USB-C charger
• Disposal: never bin a vape in general waste, take it to a drop-off point for small electricals

Mesh coil technology and pods

The pod is where the flavour and vapour production happen, and the Luxe X2 uses Vaporesso's mesh-coil pods. A mesh coil replaces the traditional round wire wrapped around cotton with a thin sheet of metal mesh that touches a large area of wicking material. Two practical advantages follow from that design. First, because the heating surface is larger, the liquid is heated more evenly and the flavour tends to be fuller and more consistent. Second, mesh coils ramp up quickly, so vapour production begins almost as soon as you draw.

Coil resistance on Vaporesso's pod mesh coils typically falls somewhere in the range of 0.4 to 0.8 ohm, with the lower resistance versions better suited to higher wattage and a looser draw, and the higher resistance versions better suited to lower wattage, tighter inhales and nicotine salts. Check the figure printed on your pod, and match your wattage to it. The pod's packaging normally gives a recommended power range, and staying within that window protects the coil, since running a coil outside its range leads to burnt tastes and a shorter life.

Filling the pod is simple, but it matters to do it properly. The pod has a fill port that opens on the side or at the top, and the 2ml UK capacity is clearly limited by the fill line. Fill slowly along the inner wall, so you do not drown the air channel in the centre, and stop at the maximum line. After filling, let the pod rest for five to ten minutes before the first puff. That gives the wicking material time to soak through, and it is the single most effective step for avoiding the dry, burnt taste that damages a new coil.

Coil life is not fixed. As a general guide, a mesh pod lasts somewhere between one and three weeks for a regular user, with sweet, high-sugar liquids shortening that, and clean, low-sweetener liquids extending it. Signs that a pod is ageing include a muted taste, a scorched edge to the flavour, gurgling, and increased leaking. At that point, replace the pod rather than trying to push through it, because a worn coil also makes your liquid taste worse than it should.

• Coil type: mesh, with a larger heating surface than a round wire coil
• Typical resistance: around 0.4 to 0.8 ohm, check your pod's printing
• Pod capacity in the UK: 2ml
• Soak time before first puff: five to ten minutes
• Typical pod life: one to three weeks depending on use and liquid sweetness

Nicotine strength guidance for the Luxe X2

Choosing the right nicotine strength matters more than most people expect, because the wrong strength is the usual reason a new vaper gives up on a device. In the UK, the maximum nicotine strength for e-liquid is 20mg/ml. That cap applies to the liquid you buy, whether it is in a pre-filled pod, a bottle or a disposable, and it is the upper limit rather than a recommendation. Nobody has to use 20mg/ml, and many people are happier on less.

With a higher-power device like the Luxe X2, nicotine strength interacts with wattage. A stronger liquid combined with high power is delivered faster and hits harder, whereas the same liquid at low power is gentler. A sensible starting guide looks like this:

• Nicotine salt 20mg/ml: suits those moving from heavy smoking or from 20mg disposables. Use lower power, around 10W to 18W, and a tight draw, so the hit is smooth rather than harsh.
• Nicotine salt 10mg/ml: suits moderate smokers, former smokers who have already come down in strength, and anyone who finds 20mg too strong. This works at lower to mid wattage.
• Freebase 3mg to 6mg/ml: suits people who vape at higher wattage with an airier draw. Freebase nicotine is harsher at high strength, so the lower numbers are the norm for open-style vaping.
• Nicotine-free, 0mg: suits those who have finished with nicotine and are keeping the habit of vaping for the flavour. The pod works the same way with 0mg liquid.

If you are coming from disposables, note that many popular disposables were sold at 20mg/ml nicotine salt, so most disposable users find that a 10mg/ml or 20mg/ml salt liquid in the Luxe X2 feels familiar. If you find yourself chain-puffing or feeling slightly dizzy or sick after a few draws, that is a sign you are taking in more nicotine than you need. Drop the strength, drop the wattage, or both. If you still feel cravings soon after finishing a pod, your strength may be too low.

A final note. This kit is for adults who already smoke or vape. If you have never used nicotine, do not start. If you are using a vape to quit smoking, speak with your local stop smoking service, since combining a vape with behavioural support improves quit rates, and a pharmacist can explain how to step the strength down over time.

Who the Luxe X2 is for, and who should skip it

No device suits everyone, and being clear about that saves you money. The Luxe X2 sits in a specific spot between a very simple pod device and a fully adjustable mod, and whether it suits you depends on what you are replacing and how much control you want.

It is a good fit if you:

• are an adult smoker or vaper moving away from disposables, now that single-use vapes cannot be sold in the UK, and want a refillable kit that works in a similar way
• want adjustable power, so you can tune the vape to the liquid instead of accepting a fixed setting
• value flavour clarity and like the way mesh coils handle fruit, mint and dessert profiles
• want a USB-C rechargeable device with a battery that gets most of the way through a normal day
• are happy to fill a pod and replace it every week or two
• want a single, pocketable device and have no interest in building coils or managing loose batteries

You may want to skip it if you:

• want the simplest possible device. A fixed-output, auto-draw pod kit asks less of you, and you may find the adjustable settings an unwanted complication
• want a very small device. Smaller, lighter pod kits exist, though they generally offer a smaller battery and lower power
• want a very large cloud and a long-lasting battery, in which case a bigger kit or a box mod with replaceable cells suits you better
• dislike filling pods and would prefer pre-filled closed pods, which are available for some other systems
• have never smoked or vaped. Vapes are for adults who already use nicotine, not for people who have never started

The Luxe X2 is also not designed for under-18s, and it is illegal in the UK to sell vaping products to anyone under 18. Keep the device, pods and liquid out of reach of children and pets. Nicotine e-liquid can be harmful if swallowed or if it gets on skin, and bottles should have child-resistant caps. If you are pregnant, have a heart condition or take regular medication, speak to a healthcare professional before using any nicotine product.

How to set up and use the Luxe X2

Setting the kit up takes a few minutes. Following the steps in order avoids the common problems, such as leaks and burnt first puffs.

• Charge first. Plug the device into a USB-C charger using the supplied cable and let it charge fully before first use. This also confirms that the charging port and cable are working.
• Unpack the pod. Remove any protective film or plug from the pod and from the mouthpiece. Check the contact surfaces are clean and dry.
• Fill the pod. Open the fill port, tilt the pod, and fill slowly with your chosen e-liquid down the inner wall, stopping at the maximum fill line. Do not overfill, and wipe off any liquid on the outside. Close the port firmly.
• Let it soak. Wait five to ten minutes. This allows the wicking material to absorb liquid evenly and protects the coil from a dry first draw.
• Insert the pod. Push the pod into the device until it clicks into place. It should sit flush with no wobble.
• Turn it on. Depending on the revision, you may switch the device on with a quick series of button presses, as described in the manual. A short indicator confirms that it is on.
• Choose your power. Start low, at around 12W to 18W for nicotine salts, and increase in small steps until the flavour and vapour feel right. If the vapour tastes hot or burnt, reduce the wattage.
• Take a few primer puffs. Take two or three gentle draws without inhaling to pull liquid through to the coil, and then start normally.

Draw technique matters too. For tight, mouth-to-lung vaping, draw slowly for two to three seconds, hold the vapour in your mouth, then inhale. Avoid very long draws, which overheat the coil, and avoid chain vaping, which does not give the pod time to re-wick. If your unit has a safety cut-off for long presses, do not rely on it as a routine.

To switch the device off for travel, use the lock or power-off sequence in the manual, so it cannot fire in a pocket or bag. When you finish a pod, do not leave it half-full of a different flavour for weeks, because stale liquid in a pod can affect the next fill.

Troubleshooting common Luxe X2 problems

Most problems with pod kits have simple causes, and many can be fixed in a minute. Work through the most likely cause first.

• Weak or no vapour on a new pod. The pod has probably not soaked yet. Wait a few more minutes, take two or three primer draws without inhaling, and check the pod is fully seated. If the pod is also low on liquid, refill it.
• Burnt or dry taste. This is usually caused by a dry coil or by running the power too high. Lower the wattage, let the pod soak, take shorter draws, and refill if the liquid is low. If the taste persists, the coil is worn and the pod needs replacing.
• Gurgling or spitting. Condensation or an overfilled pod. Remove the pod and blow gently through the mouthpiece to clear it, wipe the mouthpiece, and avoid overfilling next time.
• Leaking. A pod filled past the line, a cracked pod, a poorly seated pod or pressure changes in a bag or on a flight can all cause leaks. Wipe the contacts, check the pod for cracks, fill to the line only, and store the device upright.
• Device does not fire. Check that it is switched on, charged and that the pod is seated. Clean the contacts with a dry cotton bud. If it still fails, try a different pod to find out whether the fault is in the pod or the device.
• Short battery life. High wattage uses the battery quickly, and cold weather reduces capacity. Lower the power, charge with a suitable charger and avoid leaving the device somewhere cold or hot.
• Device will not charge. Try another cable and charger, clean any lint from the USB-C port with a dry, non-metallic tool, and leave it a few minutes before trying again.
• Hot device or swelling. Stop using it at once, unplug it, move it somewhere safe away from anything flammable, and take it to a recycling point. Do not carry on using it.

If you have tried these checks and the device still misbehaves, contact us with your order number and a clear description of the fault. Faulty goods are covered by your consumer rights in the UK, and we would rather resolve a problem quickly than have you struggle with it.

Value for money and running costs

Value on a pod kit is not only the price of the device. It is the price of the device plus the running costs over several months, and those running costs are where refillable kits tend to beat disposables clearly. A disposable typically costs a few pounds and lasts a few days to a couple of weeks, and then it is thrown away, so the cost recurs with every purchase. A refillable kit costs more up front, but after that you are paying for e-liquid and the occasional replacement pod, which is considerably cheaper per day of vaping.

For a rough comparison, a 10ml bottle of nicotine salt e-liquid typically costs a few pounds and supplies several 2ml pod fills, so a single bottle commonly lasts a moderate vaper something like a week. Pods are priced at a modest amount each and are typically replaced every one to three weeks. Over a month, a regular user would normally spend noticeably less than someone who buys disposables continuously. The exact figure depends on your usage, the prices you pay and how often you replace pods, so treat this as a direction rather than a promise.

The other half of value is the device's usable life. A built-in 1500mAh battery will typically keep its performance for many months of regular use, but it will not last forever, and when the battery fades the device has reached the end of its life. Treat that as a cost of roughly the device price divided by the months you get from it. If you look after it, charge it sensibly and avoid heat, you should get a good run.

Where the Luxe X2 offers extra value is in flexibility. Adjustable power means you can use up a bottle of liquid that tastes slightly off at the default setting, and you are not locked in to one brand's pre-filled pods, so you can shop around for e-liquid. Against that, the device does ask for a little more effort than a disposable, since you fill pods, charge a battery and replace parts. If you would rather not do any of that, the lower running cost may not be worth it to you.

• Upfront cost: higher than a disposable, lower than a full mod setup
• Running costs: e-liquid plus a replacement pod every one to three weeks
• Waste: far fewer devices thrown away than with disposables
• Flexibility: choose your own e-liquid brand, flavour and strength

How the Luxe X2 compares with similar pod kits

A fair comparison helps you decide whether the Luxe X2 is the right size and power for you. Below are some well-known alternatives and how they differ in broad terms. Figures for other devices are approximate and based on their published specifications, which can change between revisions.

• Vaporesso XROS series: the XROS kits are smaller and simpler, with a smaller battery and lower maximum output, and they are well suited to straightforward mouth-to-lung vaping. The Luxe X2 offers a larger battery and a broader power range, so it suits those who want to adjust the output. If you prefer the smallest possible device, an XROS is likely to suit you better.
• Uwell Caliburn series: the Caliburn kits are slim, simple pod systems built around a tight draw and quick setup. They are popular with people stepping away from smoking, but they generally have smaller batteries and less adjustment. The Luxe X2 gives more flexibility at the cost of size.
• Voopoo Vmate series: the Vmate kits are also simple pod devices with adjustable airflow, aimed at a similar audience. Compare pod prices and availability before choosing, since this ends up being a large part of the running cost.
• Geekvape Wenax series: Wenax kits offer a similar pod-system experience with a range of battery sizes and airflow styles. As with the others, the right choice depends on the size, battery and pod availability that suit you.

The main point is that no one of these devices suits every vaper. If your priority is a very small, simple device, a smaller pod kit is the sensible option. If you want adjustable power, a larger battery and a degree of experimenting with e-liquid, the Luxe X2 sits in a more useful position. If you want serious cloud production and the ability to swap batteries, you are looking at a different class of device altogether.

Where Vaporesso has an advantage is in the maturity of its pod and coil ecosystem. The brand has been making pod and coil systems for years, so replacement pods are widely stocked in UK shops, and that matters if you need a spare pod in a hurry. Make sure you buy the right pod for the device, as pods from other Vaporesso lines are not always interchangeable.

A final practical note on disposal. Whatever kit you buy, do not put vapes, pods or batteries in household bins. Retailers that sell vaping products are expected to accept old devices back, and your local household waste recycling centre will take them as small electricals. Doing this properly keeps lithium batteries out of bin lorries, which is a real fire risk.