VooPoo Drag X Plus Pod Kit

Overview

The VooPoo Drag X Plus Pod Kit by Voopoo across 5 flavours at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

VooPoo Drag X Plus Pod Kit overview

The VooPoo Drag X Plus Pod Kit is a refillable, high-power pod system for vapers who have outgrown low-wattage starter pods but do not want to carry a box mod and a separate tank. It combines a built-in rechargeable battery, a proprietary refillable pod that takes replaceable PnP coils, and VooPoo's Gene.AI chip, which handles power delivery and coil detection. In practical terms it sits between a slim 15W to 25W pod device and a full sub-ohm mod, and it is aimed at people who want a denser, warmer, more cloud-forward vape from one compact body.

This page is written for UK buyers and goes through the kit honestly: what it does well, where it asks for compromises, and who is better off with something else. Figures such as the 100W ceiling, the built-in battery size and the pod capacity come from the manufacturer's published specification for the Drag X Plus family. Always check the box and the quick-start card that arrive with your unit, because VooPoo occasionally revises packaging, finishes and bundled coils between production batches.

Because this is a refillable kit and not a single-use product, it is not affected by the UK ban on single-use vapes that came into force on 1 June 2025. You fill it with your own e-liquid, change the coil when flavour fades, and recharge it over USB-C. That makes it a longer-term purchase, which matters when you compare its price against a run of disposables over several months. Our listing groups 6 variants of the kit, so use the variant selector on the product page to see exactly what differs between them before you order.

The rest of this guide covers specifications, performance, flavour, build quality, battery life, the coil system, nicotine strength, who the kit suits, setup, troubleshooting and value. If you only want the short version: the Drag X Plus is a capable, adjustable device for experienced pod users and sub-ohm-curious ex-smokers, but it is not a pocket-slim, set-and-forget option, and it needs a little care to get the best out of it.

Key specifications at a glance

Before getting into how the kit feels in use, here are the headline numbers. Where a figure differs between the international specification and what is sold in the UK, we say so.

• Output range: adjustable power up to 100W, with a low end of roughly 5W, so it covers everything from tighter draws to open, airy sub-ohm style vaping.
• Battery: built-in rechargeable cell of around 3000mAh, charged over a USB-C port.
• Pod capacity: the international specification quotes 5.5ml, while UK-market pods are 2ml because of the national tank-size limit. Do not be put off by overseas reviews that mention the larger figure.
• Coils: replaceable PnP-series coils, including mesh options, in a range of resistances from low to high wattage.
• Chip: VooPoo Gene.AI, with fast firing response and automatic coil recognition.
• Operation: button-fired, with a small colour display and a menu for switching modes and adjusting wattage.
• Filling: side or top fill port on the pod, sealed with a silicone plug.
• Nicotine limit: the UK maximum for e-liquid is 20mg/ml, which applies to any bottle you put in this pod.

The 100W figure is a ceiling, not a target. Most people will vape the Drag X Plus somewhere between roughly 25W and 60W depending on the coil, and it is perfectly normal never to touch the top of the range. What the headroom gives you is flexibility: a lower-resistance mesh coil can be pushed harder, a higher-resistance coil can be kept gentle, and you can change your mind without changing device.

One point worth stating plainly is that a 3000mAh built-in battery is generous for a pod kit but it is not unlimited. High wattage drains any battery quickly, so the number on the box tells you the size of the tank, not how long a day of vaping at 60W will last. The battery section below goes into realistic expectations.

Performance and vapour delivery

The Drag X Plus is built around responsiveness. The Gene.AI chip fires quickly, so there is very little lag between pressing the button and drawing vapour, and the output stays steady through a long pull instead of fading halfway. That consistency is the first thing you notice if you are coming from a small 10W to 15W pod, where the vape can feel thin by the end of a draw.

What you get depends heavily on the coil. With a mesh coil in the lower resistance range and the wattage set toward the middle of the coil's printed range, the kit produces a warm, dense mouth-to-lung or restricted direct-to-lung vape, with noticeably more vapour than a typical pod system. With a higher-resistance coil at lower wattage, it behaves more like a conventional pod device, with a tighter draw and a throat hit that suits nicotine salts.

Airflow is adjustable on the pod, which is where much of the personality of the device comes from. Closing the airflow down gives a warmer, more concentrated vape and stronger flavour at the cost of vapour volume. Opening it up cools the vapour, adds volume and lightens the throat hit. It is worth taking a few minutes at the start to find your own balance instead of leaving everything at the factory setting.

A few honest points on performance:

• At the top of the range, the pod and coil can run through e-liquid quickly. Expect to refill more often than you would with a 15W device.
• Pushing a coil beyond its printed wattage range shortens its life and can produce a burnt taste. The Gene.AI smart mode helps by suggesting a sensible output once it reads the coil.
• Vapour production is substantial at higher power, which is a consideration if you vape indoors around other people or in places with smoke-free rules.
• The device does not need to be run at maximum to feel satisfying. Most users settle comfortably in the middle of the range.

For puff counts, there is no official figure because it is a refillable device, and any number you read is an estimate. In everyday use, a 2ml pod will typically last somewhere between a few hours and a full day depending on wattage, coil and how frequently you vape. Treat that as a rough guide and let your own habits decide.

Flavour profile and e-liquid pairing

Unlike a disposable, the Drag X Plus does not come with a fixed flavour. What you taste depends on the e-liquid you choose and how you set the device, so this section is about getting the most from whatever bottle you pick. The mesh coils used in this system have a large heating surface, which gives good flavour definition and a rounded, slightly warm vapour. Fruit, menthol and dessert profiles all translate well, and even subtle notes tend to remain readable at moderate wattage.

Here are flavour styles that suit the kit, and the kind of setting that tends to work for each:

• Menthol and mint: a classic spearmint or peppermint e-liquid stays crisp at 30W to 40W on a mesh coil. Strong menthols can feel sharp at high power, so back off a little if the cooling effect becomes uncomfortable.
• Blue raspberry and other sweet fruit: bold, sugary profiles come through well and are forgiving across a wide wattage range.
• Strawberry and watermelon ice: fruit with a cooling finish suits mid-range power, where the chill and the sweetness stay balanced.
• Tobacco: tobacco-style liquids work best at slightly lower wattage, where the earthy, dry notes are not scorched. They are a common choice for ex-smokers.
• Custard and dessert: thicker, sweeter liquids are harder on coils, so choose a mesh coil and keep the power moderate to avoid early gunking.
• Cola and soft drink flavours: these carry through clearly and tend to taste crisp rather than flat.
• Citrus and lemonade: bright and refreshing, though acidic liquids can shorten coil life slightly over time.
• Mixed berry blends: layered flavours benefit from the mesh coil's even heating, which lets individual notes separate.

Two practical notes. First, very sweet e-liquids, particularly desserts and heavily sweetened fruit, leave residue on the coil faster than lighter profiles, so you may replace coils more often. Second, if you switch flavours, rinse or at least empty the pod and let it dry before refilling, or the old flavour will ghost into the new one. If you change between menthol and a fruit profile regularly, a spare pod can save frustration.

Finally, e-liquid ratio matters. A 50/50 blend gives a stronger throat hit and sharper flavour and is a good match for nicotine salt strengths. A higher VG blend yields thicker vapour but can be slow to wick on a high-resistance coil, so check the coil's recommended ratio on its packaging.

Design and build quality

The Drag X Plus is a compact device with a rounded body and a pod that slots into the top, and it feels more like a miniature box mod than a slim pod stick. It is not a pocket-sliver, and it is noticeably larger and heavier than low-wattage pod kits, but it still fits in a jacket pocket or a bag without difficulty. The weight comes from the battery and the metal-feeling frame, which gives the device a solid, substantial hold.

The surface finish depends on the colourway you choose. Most of the range uses a textured or coated finish that resists fingerprints better than a fully glossy surface would, and the more decorative versions use resin or leather-style panels. Cosmetic finishes can scuff with daily carrying, particularly if the device lives in a pocket alongside keys, so a silicone sleeve or a separate pocket is a sensible precaution if you care about appearances.

Controls are straightforward. A single fire button sits on the body, and a small colour display shows the wattage, battery level, coil resistance and pod status. The menu is navigated with the buttons and has a short learning curve, but it is far less confusing than some full mod interfaces. The display is easy to read indoors and acceptable outdoors, though like most small screens it can wash out in direct bright sunlight.

The pod itself is where build quality is tested every day. Points to look for:

• The pod seats with a firm click and a magnetic-style hold, so it should not wobble or fall out in a bag.
• The fill port uses a silicone plug that should sit flush. If it is not fully pressed in, you will see leaks.
• The mouthpiece is smooth and comfortable, and the wide bore suits direct-to-lung draws.
• Airflow adjustment moves with a positive feel and does not slip in use.

Like any refillable pod, the seals and the silicone parts are consumables over time. If a pod begins to leak after months of use, a replacement pod is inexpensive compared with a new kit, and swapping it takes seconds. As with all devices in this category, avoid leaving it in a hot car or in direct sun, because heat expands e-liquid and encourages leaks.

Overall, the build is that of a solid, mid-priced device. It does not feel flimsy, but it is not a premium metal sculpture either, and it is best treated as a tool you carry and use rather than as a collectible.

Battery life and charging

The built-in battery is around 3000mAh, which is a large capacity for a pod kit. At modest wattage, say 20W to 30W on a mesh coil, many users get a full day of normal vaping from a charge. At 50W to 70W, the same battery empties much faster, and heavy users can expect to charge once or twice a day. These are estimates and not guarantees, since real life depends on coil resistance, puff length, ambient temperature and how often you take a draw.

Charging is over USB-C, which means the cable is the same one used by most modern phones and many other devices. Some practical tips:

• Use a quality charger from a reputable brand, ideally one rated around 5V with at least 1A to 2A available. Cheap unbranded chargers can be unreliable.
• Do not charge the device overnight under a pillow or on soft furnishings. Charge it on a hard, non-flammable surface where you can see it.
• Charging while vaping (pass-through) is possible with some devices, but it generates extra heat. Where you can, let the kit charge by itself.
• Stop using the device and contact the retailer if the casing swells, becomes very hot, or the charge indicator behaves oddly.
• A full charge from empty typically takes a couple of hours, depending on the charger.

Because the battery is built in, you cannot swap it for a spare the way you can with a removable 18650 cell. That is the main compromise. If the battery is flat and you need to vape, you either plug in and wait or fall back on a backup device. A small power bank solves this for travel.

Battery longevity is the other long-term question. Like all lithium-ion cells, the battery will lose capacity after several hundred full charge cycles, so heavy daily use may mean noticeably shorter runtimes after a year or two. Avoiding full discharges, keeping the device out of heat and not leaving it plugged in for days will all help.

When the kit finally reaches the end of its life, do not put it in household rubbish or the recycling bin. Devices containing lithium batteries are covered by the UK's electrical waste rules. Retailers that sell vapes are required to take back old devices, and most household waste recycling centres and many supermarkets have WEEE drop-off points. Remove the pod and empty any e-liquid first, then drop the device at a collection point, so the battery is recycled safely.

PnP coils, pods and mesh technology

The coil system is the heart of the Drag X Plus. VooPoo's PnP (plug and play) range is one of the most widely available coil families on the market, which is a real advantage: replacements are easy to find, prices are reasonable and there are options for different vaping styles. Coils press into the base of the pod, so changing one takes seconds and needs no tools.

The coils fall broadly into two families. Mesh coils, such as the PnP-VM series, use a flat mesh heating surface instead of a wound wire. Because the surface area is larger, mesh heats more evenly, wicks quickly and produces better flavour and more vapour at a given wattage. Standard wire coils, such as the PnP-TW and similar types, tend to be more traditional in their behaviour, with a slightly different flavour and vapour character.

Resistance guides how the coil behaves. As a general rule:

• PnP-VM1 (around 0.3 ohm mesh): a mid-range option, popular for balanced flavour and moderate vapour.
• PnP-VM5 (around 0.2 ohm mesh): suited to higher wattage and warmer, denser vapour.
• PnP-VM6 (around 0.15 ohm mesh): the lowest-resistance common option, for open-airflow, direct-to-lung vaping at higher power.
• Higher-resistance coils: better suited to lower wattage and tighter draws, though not every higher-resistance coil is compatible with every PnP pod, so check the listing.

Each coil has a printed wattage range on its packaging. Staying within that range is the single best way to extend coil life and keep flavour clean. The Gene.AI smart mode will read the coil and set a sensible starting output, which is useful if you are new to the system.

How long does a coil last? There is no fixed number. With lighter e-liquids and moderate power, a coil might last two to three weeks. With sweet dessert liquids or high wattage, it can be a week or less. The usual signs a coil is finished are muted or burnt flavour, a gurgling sound, or noticeably reduced vapour. Replace it promptly, because pushing on with a worn coil makes for an unpleasant vape and can strain the battery.

One caution: not all PnP coils are interchangeable across every VooPoo pod. Pods and coils share a family name but come in different sizes and generations, so match the coil to the pod model on the product page before buying spares. When in doubt, check the compatibility list or contact us.

To prime a new coil, drip a few drops of e-liquid directly onto the coil's wicking holes, seat it in the pod, fill the pod and wait several minutes before the first puff. Skipping that step is the main cause of burnt first draws and short coil life.

Choosing the right nicotine strength

In the UK, e-liquid for refillable devices is capped at 20mg/ml nicotine and bottles are limited to 10ml, so everything on the shelf is already within a defined range. The decision for the Drag X Plus is not about staying legal, but about matching strength to the power you vape at and your own habits. Nicotine is addictive. If you do not currently smoke or vape, there is no health reason to start.

The key principle is that higher wattage and larger vapour volume deliver more nicotine per puff. A strength that is comfortable at 12W can be harsh and overwhelming at 50W. Here is a rough guide:

• 10mg/ml nicotine salt: a sensible starting point for ex-smokers using a mesh coil at lower to mid power, often around 20W to 35W. It is smooth, and satisfying at moderate volume.
• 20mg/ml nicotine salt: intended for tight, low-power draws on high-resistance coils. At the higher wattages this kit can reach, 20mg salt is likely to feel harsh, and it delivers a lot of nicotine very quickly. It is better suited to light, low-power use.
• 3mg/ml to 6mg/ml freebase nicotine: traditional strengths for bigger, airier vaping at higher wattage. Many people running low-resistance coils at 40W and above prefer these.
• 0mg/ml: available if you want to vape for flavour only, or if you are stepping down.

Practical advice for choosing:

• If you currently smoke around ten or more cigarettes a day, start with a nicotine salt around 10mg and increase only if you still crave cigarettes.
• If you find the throat hit too sharp, lower the strength or the wattage, or open the airflow.
• If you feel dizzy, queasy or jittery after vaping, stop, drink water and choose a lower strength. These are signs of too much nicotine.
• If you find yourself chain-vaping because the hit is too weak, move up one step, not three.

Because the Drag X Plus is adjustable, you can tune the experience without buying a different device. A common approach is to start at a modest wattage and strength, then change one variable at a time over a few days. That way you can tell which change helped.

Remember that nicotine strength labelled on a bottle is per millilitre. A 10ml bottle at 10mg/ml contains 100mg of nicotine in total. Keep all e-liquid out of the reach of children and pets, and store it away from heat and direct light.

Who the Drag X Plus suits, and who should skip it

No device suits everyone, and being honest about this saves money. Here is who tends to get the most from the Drag X Plus, and who is better looking elsewhere.

It is a good fit if you:

• Currently use a low-wattage pod kit and want denser vapour and stronger flavour without moving to a separate tank and mod.
• Are an ex-smoker who found basic pod systems unsatisfying and needs a warmer, more substantial vape to stay off cigarettes.
• Like having adjustable wattage, airflow and a choice of coils instead of a fixed setup.
• Want a refillable device that avoids the ongoing cost and waste of disposables, now that single-use vapes are banned in the UK.
• Do not mind a device slightly larger and heavier than a slim pod stick.

You may want to skip it if you:

• Want the smallest, lightest pocket device possible. A slim 15W to 25W pod kit will be far more discreet.
• Prefer a completely maintenance-free experience. Refilling, priming and replacing coils is part of ownership.
• Are brand new to vaping and want something simple. A basic draw-activated pod kit with fewer settings is easier to start with.
• Need removable, swappable batteries for long days away from a charger.
• Vape mostly at very low wattage with high-strength nicotine salts. You will be paying for headroom that you do not use.
• Are under 18 or do not currently smoke. Vaping products are for adult smokers looking for an alternative, and it is illegal to sell them to anyone under 18 in the UK.

There is also a middle group: people who are curious about sub-ohm style vaping but unsure it is for them. For this group, the Drag X Plus works as a low-risk step up, because you can run it gently and increase power as you get used to it. If you decide you want something even bigger later, the skills you learn here, such as coil priming, wattage setting and airflow adjustment, transfer directly to larger devices.

If you are using vaping to quit smoking, the NHS suggests combining a vape with support from a local stop smoking service, which improves your odds of quitting. Our own advice is to pick the strength and wattage that actually stops you reaching for a cigarette, because a vape that feels unsatisfying is the most common reason people relapse.

How to set up and use the kit

Setting up the Drag X Plus takes only a few minutes, and doing it carefully prevents the most common problems, notably leaks and burnt first puffs. Follow these steps.

• Unbox and check: confirm that the device, pod, coil, USB-C cable and paperwork are present. Charge the battery for a short while before first use if it is low.
• Install the coil: press the PnP coil firmly into the base of the pod until it seats fully. Before inserting it, put a few drops of e-liquid onto the wicking holes on the side of the coil.
• Fill the pod: open the silicone plug on the fill port, fill with e-liquid slowly, and stop below the maximum line. Avoid filling the central chimney, and close the plug firmly.
• Wait: let the filled pod stand for five to ten minutes so the cotton fully saturates. This is the step most people skip, and it is the main cause of dry hits.
• Insert the pod: push the pod into the device until it clicks into place.
• Power on: VooPoo devices generally use several rapid presses of the fire button to switch on and off and to open the menu, but the click count can vary, so check the quick-start card supplied with your unit.
• Set the output: in smart mode the chip reads the coil and picks a starting wattage. In manual power mode you set it yourself, staying inside the range printed on the coil packaging.
• Take a few gentle puffs: first draws should be short and gentle, so the coil can settle in.

For everyday use, hold the fire button as you draw, using slow, steady puffs of two to four seconds instead of long, hard ones. Take a short pause between puffs to give the coil time to rewick, which is especially useful at higher wattage. Keep the device upright when it is not in use, particularly when travelling, and consider a pocket sleeve.

To refill, remove the pod, open the plug, add e-liquid and wait a moment before continuing. To change coils, remove the pod, pull the old coil out, clean around the base with a dry tissue and push in a freshly primed one. Rinse the pod with warm water and let it dry fully before changing flavours.

For safety, never leave the device in a warm car, do not carry it loose with coins or keys, and use only the supplied or a reputable USB-C cable for charging. Keep vaping products out of reach of children.

Troubleshooting common problems

Most issues with refillable pod kits are simple to fix. Work through these in order before assuming the device is faulty.

• Burnt or harsh taste: usually a coil that was not primed properly, a coil that has reached the end of its life, or a wattage set too high. Wait a few minutes, lower the power, take shorter puffs, and replace the coil if the taste does not improve.
• Weak flavour or low vapour: the coil may be worn or gunked, or the e-liquid may be too thick for the coil. Fit a fresh coil, check the VG ratio, and make sure the airflow is not closed all the way.
• Leaking from the pod: check that the fill plug is seated flush, the coil is pressed in fully, and the pod is not overfilled. Pressure changes during flights or in hot conditions can also push liquid out, so carry the pod empty or nearly so when travelling.
• Gurgling or spitting: too much liquid in the airway or a flooded coil. Wipe the mouthpiece, turn the airflow up, and take a few gentle puffs without pressing the button to clear the condensation.
• Device shows a coil or resistance error: remove and reseat the pod and coil, and wipe the contacts with a dry cloth. If the error persists, try a different coil to see whether the coil or the device is at fault.
• Does not fire or turn on: check the battery level and charge the device. If it still does not respond, try a different cable and port.
• Charging problems: test another cable and a different power source. Check the USB-C port for lint or debris, and remove it gently with a wooden toothpick, never metal.
• Dry hits when the pod is clearly full: usually caused by chain vaping, which gives the coil no time to rewick, or by wattage that is too high for the liquid. Slow down, reduce power and let the coil recover.

If you have tried these and the device still behaves oddly, stop using it and get in touch. Do not attempt to open the casing or modify the battery. Faulty or damaged devices should be returned through the retailer or taken to a recycling drop-off point, and never thrown in general waste.

A good habit is to keep a spare coil and a spare pod at home. Having them to hand turns most failures into a two-minute fix, rather than a day without your device. Keeping the contact points clean, drying the pod between flavours and keeping the device out of extreme temperatures will prevent the majority of recurring faults.

Value for money and how it compares

The Drag X Plus asks for a higher upfront price than a basic starter pod kit, so the question is whether it earns it. The answer depends on how you vape and how long you keep the device.

On running costs, a refillable kit is almost always cheaper than disposables over time. You buy a 10ml bottle of e-liquid and an occasional pack of coils, instead of replacing a whole device every few days. With single-use vapes now banned in the UK, the comparison is less about disposables and more about other refillable kits, but the same logic holds: a reusable device spreads its cost across months of use. Coil packs are inexpensive and widely stocked, which keeps the running cost predictable.

Here is how it compares fairly with other popular options:

• Versus Smok Nord 5: the Nord 5 is a similar kind of device, with a roughly 80W output and a slightly smaller battery. The Drag X Plus offers a higher power ceiling and a larger built-in cell, while the Nord is simpler and has a long-established coil range. Both are reasonable choices, and which suits you comes down to coil preference and handling.
• Versus slim pod kits such as Vaporesso XROS or Uwell Caliburn: these are smaller, lighter and easier to carry, with simpler operation and lower power. If you vape at low wattage and value discretion, they are a better fit. If you want more vapour and adjustability, the Drag X Plus does more.
• Versus a separate box mod and tank: a mod with a sub-ohm tank gives more tuning and bigger vapour, but it is bulkier and has more parts to maintain. The Drag X Plus is the more convenient single-body option.
• Versus other VooPoo devices: the broader Drag range includes both smaller and larger options. If you want removable batteries, look at the 18650-based models in the line instead.

Where the Drag X Plus is strongest is the combination of adjustability and the widely available PnP coil family. Where it is weakest is the built-in battery, since you cannot swap it, and the size, since it is larger than a slim pod kit.

Is it worth it? For adult smokers who found basic pods unsatisfying and want flexibility, yes, we think it represents fair value. For light users who vape at low power, a cheaper and smaller device would serve you just as well, and you should save the money. Whichever you choose, buy from a retailer that offers proper age verification, clear returns information and genuine stock, since counterfeit and unregulated products are common in this category.