Candy Cane - Original Yeti Candy Cane 100ml Candy Cane Original

Overview

The Candy Cane - Original Yeti Candy Cane 100ml Candy Cane Original by Yeti in Candy Cane - Original at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Yeti Candy Cane 100ml Candy Cane Original: overview

Yeti Candy Cane 100ml in the Candy Cane Original flavour is a shortfill e-liquid made for refillable vape kits. It arrives in a 100ml bottle that is only part filled, which leaves room to add nicotine shots if you want nicotine in the mix. The flavour is modelled on the red-and-white striped peppermint sweet that turns up on Christmas trees and in stockings across the UK: a sugary, cool, minty profile rather than a fruit or dessert blend. This guide covers what to expect in the bottle, how it behaves in different tanks and coils, how to choose a nicotine strength, how to troubleshoot common problems and how it compares with the alternatives you are probably weighing up.

Key facts at a glance:

• Product type: shortfill e-liquid. It is not a device, so there is no battery, charger or coil in the box.
• Bottle size: 100ml bottle. Shortfills in this format normally hold around 80ml of nicotine-free liquid, leaving roughly 20ml of headroom for two 10ml nicotine shots. Always confirm the exact fill volume on the label of the bottle you receive.
• Flavour: Candy Cane Original, a peppermint candy style flavour with a sweet body and a cool finish.
• Base ratio: liquids sold in this style of shortfill are usually mixed high-VG, commonly around 70VG/30PG. Check the label for the precise ratio, because it changes how the liquid behaves in your coil.
• Nicotine: supplied at 0mg. You add 10ml shots yourself if you want a nicotine strength.
• Suited to: sub-ohm tanks, mesh coils, RDTAs and open pod systems with a wicking-friendly coil.
• Age: 18+ only. Vaping products are for adult smokers and existing vapers.

It helps to be clear about what this product is not. It is not a disposable vape. Single-use vapes have been banned from sale across the UK since 1 June 2025, which is one reason shortfills and refillable kits have taken over from the disposable market. Before that ban, disposables were limited to a 2ml tank and a nicotine strength of no more than 20mg/ml, and that 20mg/ml ceiling still applies to every nicotine e-liquid and nicotine salt sold in the UK today. A 100ml shortfill sits at the other end of the scale: nicotine-free in the bottle, with strength set by you, and a much lower cost per ml than a sealed pod or a 10ml bottle.

Yeti is a mainstream UK brand rather than a boutique craft house, so the appeal here is straightforward flavour at a sensible price in a large bottle. If you want a seasonal candy flavour you can vape through December and beyond without topping up every few days, this is the kind of product the 100ml format was designed for.

Flavour profile: what Candy Cane Original tastes like

Candy Cane Original is built around peppermint sweet, not fresh mint leaf and not menthol crystals. The easiest way to picture it is a hard peppermint candy dissolving slowly: a sugary front note that arrives first, with a cool minty lift that builds through the back of the throat and lingers a little after you exhale. Because the flavour is candy-led, it tends to read as sweeter and rounder than a straight spearmint or peppermint e-liquid, with the cooling sitting in the background rather than hitting like an ice liquid.

Taste is personal, and cooling agents are used in different amounts from batch to batch, so treat the following as a guide rather than a guarantee:

• Inhale: sweet peppermint candy with a smooth, slightly creamy sugar edge. The sweetness is noticeable but should not be syrupy.
• Exhale: a clean mint cooling that spreads across the tongue and the roof of the mouth. Expect a refreshing finish rather than a numbing one.
• Aftertaste: a light sugary mint that fades within a minute or so. It does not leave the heavy, lingering residue that dark dessert liquids can.

Wattage changes the picture noticeably. At lower power the sweetness comes forward and the mint feels softer, closer to a mellow sweet shop flavour. As you raise the wattage within your coil's recommended range, the cooling becomes sharper and the sugar notes get slightly thinner and warmer. Most vapers find the flavour sits well in the lower to middle third of the coil's wattage range, where the vapour is warm rather than hot and the candy and mint stay balanced.

Airflow matters as well. A tighter airflow setting concentrates flavour and makes the sweetness more obvious, while a wide-open airflow gives bigger, cooler vapour and a more diluted taste. If the mint feels too strong, try a slightly warmer setup with the airflow closed down a notch. If it feels too sweet, open the airflow and lift the wattage a few watts.

As with any sweet liquid, flavour fatigue is real. Vaping one sweet peppermint all day can dull your palate, an effect often called vape tongue. Keeping a second, different flavour in the rotation, or taking a water break and a sip of something plain, resets your taste buds and brings the candy cane character back. Seasonal candy flavours also pair well with a cup of tea or coffee, which many vapers use as a reset between sessions.

Because this is a candy cane rather than a fruit-ice, it is a fair pick for people who dislike heavy menthol but still want something cool and fresh. If you find even mild mint overpowering, a dessert or fruit flavour will suit you better, and it is better to know that before buying a 100ml bottle than after.

Bottle design, build quality and packaging

Shortfill bottles are built around a simple job: hold a large volume of liquid, give you somewhere to add nicotine shots, and let you refill a tank without spilling. The 100ml format uses a soft, squeezable plastic bottle with a slim nozzle tip. The tip is designed to fit inside most tank fill ports, including the smaller silicone-plugged ports on many sub-ohm tanks. If your tank has a very narrow fill port, check that the nozzle fits before you start, and keep a spare empty 10ml dropper bottle or a small syringe to decant into if it does not.

What to check when your bottle arrives:

• Tamper-evident seal: the cap should have an intact ring or foil seal. If it has been broken or the bottle is sticky on the outside, contact the retailer before using it.
• Label information: the label should show the flavour name, the VG/PG ratio, the stated liquid volume and the batch code. Keep the batch code in case you ever need to raise a query.
• Fill level: the liquid should sit well below the neck. That headspace is deliberate, since it is where your nicotine shots go.
• Nozzle and cap fit: the nozzle should sit firmly in the neck, and the cap should screw down without cross-threading.

Why is the bottle only part full? In the UK, nicotine-containing e-liquid may only be sold in bottles of up to 10ml. A nicotine-free 100ml shortfill is outside that rule, so the maker supplies the nicotine separately as 10ml shots, and you combine them at home. That is why the bottle is not filled to the brim: it needs spare volume for the shots and for shaking.

Plastic bottles are light and unlikely to break in a bag or a coat pocket, but they can be squeezed too hard. Squeezing the bottle while the nozzle is in a fill port forces liquid up quickly and is a common cause of flooded tanks. Fill slowly, and give the bottle a gentle squeeze rather than a squirt. Wipe the nozzle clean after each fill, and keep the cap on between uses so dust and pocket fluff stay out of the liquid.

Store the bottle upright, away from direct sunlight and radiators, and out of sight and reach of children and pets. Light and heat gradually darken e-liquid and dull flavour, particularly in a sweet, mint-led liquid. A cool cupboard or drawer is ideal. Because the bottle is large, many vapers keep this as a home stock bottle and decant a few days of liquid into a smaller bottle for carrying around, which keeps the main supply sealed and cleaner for longer.

Finally, remember that the bottle is a piece of plastic you will eventually need to dispose of. Once it is empty, rinse the cap and bottle if your local council asks for clean plastics and place them in household recycling, following local rules. The Recycle Now postcode search will tell you what your council accepts.

Nicotine strength guidance and how to mix shots

Because Candy Cane Original is supplied at 0mg, picking a strength is your decision. The arithmetic is simple: final strength in mg/ml equals the strength of the shots multiplied by the total volume of shots, divided by the final volume of liquid in the bottle. Most UK nicotine shots are 18mg/ml in a 10ml bottle, although 20mg/ml shots exist, and 20mg/ml is the legal ceiling for any nicotine e-liquid sold in the UK.

Worked examples for a 100ml bottle that starts with around 80ml of liquid and has room for two 10ml shots:

• No shots: 0mg/ml. Suitable for people who vape purely for flavour or who have already come off nicotine.
• One 18mg/ml shot, topped up to 90ml total: roughly 2mg/ml. Only works if your bottle's fill volume allows it, so check the label first.
• Two 18mg/ml shots, filling the bottle to 100ml: 360mg of nicotine in 100ml, which is 3.6mg/ml. This is the usual route to a roughly 3mg result.
• Two 20mg/ml shots, filling to 100ml: 400mg in 100ml, which is 4mg/ml.

These sums assume the shots are the same VG/PG type as the liquid or close to it. Always check the shot label and the bottle label rather than relying on the figures above, because brands vary in how much liquid they supply and how many shots the bottle can take.

Choosing a starting point:

• Light or occasional vapers and ex-smokers who smoked 10 or fewer a day: 0mg to 3mg is usually enough in a sub-ohm setup.
• Average smokers moving over from around 10 to 20 a day: 3mg to 4mg is a common starting range for lower-wattage mesh coils and open pod kits.
• Heavier smokers: a 100ml bottle with two shots tops out at about 3.6mg to 4mg, so if you need more than that to stay off cigarettes, a 10ml nicotine salt at 10mg or 20mg in a tighter pod kit may fit better than a sub-ohm shortfill.

Why do sub-ohm users run low strengths? Sub-ohm devices produce a lot of vapour per puff, so you absorb more nicotine with each draw than you would from a tight, low-powered pod. Using a high strength in a high-wattage tank tends to feel harsh in the throat and can cause nicotine side effects such as dizziness, nausea or a racing heart. If you feel any of those, stop, drink some water and move to a lower strength next time.

Nicotine is addictive. If you do not smoke, you should not start vaping, and the NHS recommends vaping only as an aid for smokers who want to quit. Nicotine is not suitable during pregnancy or breastfeeding without medical advice, and anyone with a heart condition or who is taking prescribed medication should speak to a GP or pharmacist first.

Performance and puff delivery

Performance with a shortfill is mostly about how the liquid and the coil work together, since the bottle itself has no puff count the way a disposable does. A more useful way to think about longevity is in millilitres per day. Typical sub-ohm vapers use somewhere between 3ml and 6ml per day, with heavy users going beyond that. On that basis, 80ml of liquid lasts roughly two to four weeks of normal use. As a rough estimate, a three to four second draw at 30 to 50 watts uses somewhere in the region of 0.04 to 0.08ml, which puts the bottle at around 1,000 to 2,000 draws. Treat that as an estimate rather than a promise, because coil resistance, wattage, airflow and draw length all shift it.

The base ratio shapes the experience:

• Vapour production: a high-VG base, commonly around 70VG, produces dense, thick vapour that suits sub-ohm tanks and open airflow.
• Throat hit: at 0mg to 3mg the throat hit is light and smooth. The cooling from the mint gives a bit of sensation on the exhale even at 0mg, so some vapers perceive more throat hit than the nicotine alone would suggest.
• Flavour delivery: the sugar-mint balance comes through most clearly on mesh coils, which heat the liquid evenly and give a consistent taste from first puff to last.
• Wicking: thick, sweet, high-VG liquid needs a coil with enough wicking surface. Mesh coils and larger-bore Kanthal or stainless coils handle it well, whereas very tight, high-resistance pod coils can struggle.

Pairing the liquid with the right wattage is the easiest way to get good flavour from it. The coil you fit will have a recommended wattage range printed on the side. As a rule of thumb, start at the lower end of the range, take a few puffs, and raise the power by one or two watts at a time until the flavour is clear and the vapour is warm, not hot. If the vapour starts to taste harsh, dry or slightly burnt, you have gone too far, and you should drop the power back down.

Sweet liquids also affect how a coil ages. Sugars and sweeteners caramelise on the coil surface as it heats and cools, building a thin film that dulls flavour over time. A candy flavour like this one will typically need a fresh coil more often than a lightly sweetened or unflavoured liquid. Most users find a mesh coil lasts one to three weeks on a liquid of this type, depending on wattage and how much you vape.

For daily use, performance is mostly consistent as long as you keep the tank at least a third full, prime new coils properly and avoid chain vaping, which can heat the coil faster than the wick can resupply liquid. If you notice the flavour fading in the second half of the bottle, it is more likely to be coil wear than the liquid itself, so fit a new coil before assuming the bottle has gone off.

Battery and charging: what your device needs

The e-liquid has no battery and nothing to charge, but the quality of your battery and charger decides how well this liquid performs, so it is worth covering. The three common setups for a 100ml shortfill each have different power needs:

• Box mod with removable 18650 or 21700 cells: an 18650 cell is typically rated from 2,500mAh to 3,500mAh, while a 21700 cell commonly offers 4,000mAh to 5,000mAh. Higher capacity means longer between charges, but the continuous discharge rating (CDR) matters more for safety.
• Sealed mod or pod kit with a built-in battery: commonly 1,000mAh to 3,000mAh, charged by USB-C. Fine for 15 to 40 watt mesh coils, although you will charge it daily if you vape heavily.
• Open pod systems: often 800mAh to 1,500mAh, aimed at lower-wattage coils between roughly 12 and 25 watts.

A quick power check shows why battery rating matters. A 50 watt output from a single 3.7V cell draws roughly 13 to 14 amps, before accounting for efficiency losses. A single-cell mod running a 0.2 ohm mesh coil at 50 watts should therefore use a cell with a continuous discharge rating of at least 20A to leave a safety margin. Never use damaged or re-wrapped cells, and never mix cells of different ages or brands in a multi-battery mod.

Safe charging habits:

• Use the cable and charger supplied with the device, or a reputable USB-C charger rated at 5V.
• Charge on a hard, non-flammable surface, away from curtains and bedding.
• Do not leave a device charging unattended overnight.
• Carry spare 18650 or 21700 cells in a plastic case, never loose in a pocket or bag with coins and keys.
• Stop using any battery that is swollen, hot to the touch, leaking or has a torn wrap.

Lithium-ion cells and vape devices must never go in household bins or standard recycling, because crushed or damaged cells can start fires in bin lorries and recycling plants. When a device or cell reaches the end of its life, take it to a proper drop-off point. Many vape shops and some supermarkets accept used vape devices and batteries, and most council recycling centres have bins for small electricals and household batteries. The Recycle Your Electricals website has a postcode search that lists the nearest collection points. Tape over the terminals of loose cells before you drop them off.

If your current device is a basic prefilled pod or a sealed starter kit that cannot take a refillable tank, a 100ml shortfill will not suit it. You would need a refillable tank or an open pod system, which is a relatively small purchase and will quickly pay for itself through lower liquid costs.

Coil and mesh technology: choosing the right coil

The coil is where your liquid is turned into vapour, and getting the choice right is probably the single biggest factor in how Candy Cane Original tastes. For a sweet, high-VG liquid there are three main routes.

• Sub-ohm mesh coils (roughly 0.1 to 0.4 ohm): these use a flat sheet of woven resistance wire with a large heating surface. They typically run at 40 to 80 watts, vape directly into the lung and give the densest vapour and strongest flavour. They also use liquid fastest, so expect to work through the bottle more quickly. Good if you want big clouds and a warm, full candy flavour.
• Mid-resistance mesh coils (roughly 0.4 to 0.8 ohm): usually rated for 15 to 35 watts. These suit mouth-to-lung vaping, give a softer hit and are gentler on both battery and liquid. For many people moving from a pod kit this is the most comfortable starting point for a 100ml shortfill.
• Open pod coils (roughly 0.6 to 1.0 ohm): found on refillable pod systems, typically at 12 to 25 watts. They work with higher-VG liquids as long as the coil has wide wicking holes. Very tight, high-resistance coils built for 50/50 nic salts can wick high-VG liquid too slowly and cause dry hits.

Mesh coils are generally preferred for sweet liquids because the large, evenly heated surface reduces hot spots and gives more consistent flavour than a single round wire. Cotton-wicked coils are the most common and give a warm, rounded flavour, while some ceramic and special-wick designs aim for longer life and cleaner taste, usually at a higher price per coil.

Priming a new coil is not optional. Dry cotton burns instantly, and a burnt coil can ruin a whole tank of liquid. Before first use, put a few drops of the liquid directly onto the exposed cotton or mesh through the coil's wicking holes, fill the tank, and let it sit for five to ten minutes so the cotton fully saturates. Then take two or three gentle, unpowered draws to pull liquid through before pressing the fire button, and start at the bottom of the coil's wattage range.

Signs that a coil is nearing the end of its life include a muted or faint flavour, a slight burnt note that does not clear after a few puffs, gurgling and spitting, and a darkened, gunky colour in the coil head. With a sweet candy flavour you will probably replace coils every one to three weeks. Lower wattage extends coil life, and taking a few seconds between puffs gives the wick time to resupply.

If you are unsure which coil to buy, check your tank's manual or manufacturer page. Coils are specific to each tank or pod, and using a mismatched coil can cause leaks and poor performance.

Who Yeti Candy Cane is for, and who should skip it

Every flavour has an audience, and a candy cane peppermint liquid is more specific than most. It tends to suit the following vapers.

• Adult smokers moving away from cigarettes: a sweet mint is an easy transition flavour for people who want something that is clearly not tobacco but still gives a cool throat sensation.
• Sub-ohm and mesh coil users: the high-VG base and large bottle suit tanks that use a few millilitres a day.
• People who like sweet, cool flavours: if you enjoy peppermint sweets, mint chocolate or a candy-style ice flavour, the profile will be familiar.
• Seasonal vapers: candy cane flavours naturally appeal around Christmas, and a 100ml bottle gives enough liquid to see out the season.
• Value-focused vapers: anyone who has noticed how fast 10ml bottles disappear will see the benefit of a larger volume at a lower cost per millilitre.

It is probably not for you if any of these apply.

• You are under 18, or you have never smoked: vaping products are for adult smokers. Nicotine is addictive and vaping is not risk free, even though the NHS describes it as far less harmful than smoking.
• You dislike mint or cooling flavours: even a mild peppermint can feel intense over a full bottle. Try a smaller bottle in a similar profile first if you are not sure.
• You need a high nicotine strength: a 100ml shortfill suits roughly 0mg to 4mg. Stronger nicotine needs a nic salt in a lower-powered kit.
• You use a prefilled or fixed-coil device: shortfills need a refillable tank or open pod.
• You are pregnant, breastfeeding or have a heart condition: speak to a pharmacist or GP before using nicotine products.
• You want a grab-and-go product: mixing shots and filling a tank is simple, but it is more hands-on than a prefilled pod.

People often ask whether a seasonal flavour is something you can only vape in winter. In practice, peppermint candy flavours are cooling and refreshing, so many vapers keep using them year-round. That said, if you only like the idea of the flavour at Christmas, a single bottle, and not a stockpile, is a sensible approach.

If you are new to shortfills altogether, it is worth knowing that the process is not difficult but it does involve a few steps. Take ten minutes to read the how-to section below before your first mix, and keep the instructions handy until it feels routine. If you are still unsure after that, speak to your local stop smoking service, which can offer free advice on vaping as a quitting aid in many areas of the UK.

How to use: mixing, filling and priming

Using a shortfill for the first time can feel fiddly, but the process is straightforward. Follow these steps in order and you will avoid most of the usual mistakes.

• 1. Wash your hands and clear a space. Work over a tissue or a tray, because e-liquid spills are sticky and nicotine can be absorbed through skin.
• 2. Decide on your strength. If you want 0mg, skip to step 6. For nicotine, use the maths in the nicotine strength section above and check the bottle label for the maximum number of shots it can take.
• 3. Open the bottle. Twist off the cap and pull out the nozzle tip. If the tip is stiff, use a small pair of pliers carefully, or twist and pull.
• 4. Add the shots. Snip or unscrew the top of each nicotine shot and squeeze the contents into the bottle. Do not overfill, and stop if the liquid reaches the neck.
• 5. Refit the nozzle and cap. Press the nozzle firmly into place and screw the cap on tight.
• 6. Shake. Shake vigorously for around 30 to 60 seconds so the nicotine and liquid blend fully.
• 7. Rest. Leave the bottle for an hour, or overnight if you can, to let the nicotine and flavour settle. You can vape sooner if you wish, but the flavour can be slightly flatter in the first hours.
• 8. Label it. Write the nicotine strength and the mixing date on the bottle with a marker, particularly if you have more than one bottle at home.

To fill your tank, unscrew or slide open the fill port, tilt the tank, and slowly squeeze liquid down the side of the glass rather than straight onto the coil. Avoid filling over the central airflow tube, because overflow can flood the coil. Stop below the maximum fill line, close the tank, and then follow the priming routine for the new coil described in the coil section. Wipe up any drips from the outside of the tank and from your hands.

Start at a low wattage on your first puffs. Take slow three to four second draws with a short pause between each. If flavour is muted, raise the power by one or two watts. If vapour is hot or harsh, lower it. Keep the tank at least a third full and top it up before it runs low, so the cotton never dries out.

Safe use tips: keep bottles locked or out of reach of children and pets, never put the bottle or tank on a heater, never drink or swallow e-liquid and call NHS 111 or 999 straight away if anyone does. If liquid gets on your skin, wash it off with soap and water immediately.

Once mixed with nicotine, a bottle of liquid is better used within a few months, as nicotine and flavour both degrade slowly with light, heat and air. If you are mixing a big bottle at 0mg, there is no nicotine to degrade and the liquid will keep its flavour longer when stored sealed in a cool, dark place.

Troubleshooting common problems

Most problems with shortfills come down to coils, power or priming, rather than the liquid itself. Work through the likely cause before concluding the bottle is faulty.

• Burnt taste: usually a dry or worn coil. Check the tank is not nearly empty, re-prime if the coil is new, drop the wattage and take shorter, slower puffs. If the burnt taste continues, change the coil.
• Weak or muted flavour: often vape tongue or a tired coil. Try a different flavour for a day, rinse your mouth, and replace the coil if it has been in for more than a couple of weeks. Raising the wattage slightly can also help.
• Gurgling and spitting: too much condensation or liquid in the airflow. Wipe the drip tip and the base of the tank, check the coil is seated properly, and reduce the airflow slightly if it is wide open.
• Leaking from the tank: check the coil is screwed in tightly, the O-rings are present and undamaged, and the fill port is shut properly. Do not overfill, and avoid squeezing the bottle hard while filling.
• Dry hits: the wick is not getting liquid quickly enough. Check the tank level, make sure the coil's wicking holes are not blocked, and consider a coil with larger wicking ports if you are using a thick, high-VG liquid in a small pod coil.
• Too sweet or sickly: open up the airflow and raise the wattage slightly, or switch to a lower-resistance mesh coil. A rinse of the tank can also help if old flavours are mixing.
• Too cool or sharp in the throat: lower the power a little, close the airflow a notch, or reduce the nicotine strength. Cooling agents and nicotine together can feel harsher than either alone.
• Sticky bottle or crusty residue around the nozzle: wipe with a damp cloth. Sugar crystallising on the outside of the bottle is a cosmetic issue, not a sign the liquid has spoiled.
• Cloudy or darkened liquid: a slight darkening over time is normal for aged e-liquid, particularly when exposed to light. Strong off smells, visible particles or separation that does not mix back after shaking are reasons to stop using the bottle and contact the retailer.
• Throat irritation or coughing: try a lower nicotine strength, lower wattage, or a slightly more open airflow. Persistent irritation, chest pain or breathing difficulty is a reason to stop vaping and seek medical advice.

If you have tried these steps and still suspect a problem with the liquid itself, such as an unusual smell, an incorrect fill level, a broken seal or a bottle that looks different from the label description, keep the bottle and packaging, note the batch code and contact customer service. Do not keep vaping a liquid that tastes or smells wrong.

When in doubt, swap to a fresh coil and a lower wattage first. Nine times out of ten, that fixes taste problems without any other change.

Value for money

The strongest argument for a 100ml shortfill is cost per millilitre. Smaller 10ml bottles are convenient but expensive per ml, and a 100ml bottle holding 80ml of liquid is the equivalent of eight 10ml bottles. Even when you add the cost of nicotine shots, the cost per ml generally works out lower than buying the same volume in 10ml bottles, and you also reduce the amount of plastic you throw away.

Here is a simple way to work out your own number. Take the price you pay for the bottle, add the cost of any nicotine shots you use, and divide by the liquid volume. Then multiply by your daily use. As an illustration only, not a quote of today's price, a bottle and two shots costing a combined 20 pounds for 100ml works out at 20 pence per ml. At 4ml a day that is around 80 pence a day, or a little over 24 pounds a month. Your own figures will differ, so use the formula with the current price shown on the product page.

Other costs to include when thinking about value:

• Coils: typically a few pounds each, replaced every one to three weeks with a sweet liquid. Over a month that can add a few pounds.
• Nicotine shots: if you use nicotine, shots add a fixed cost per bottle. Check whether your retailer offers shots in multi-buys.
• Device and charging: a one-off cost spread over months or years of use.

Compared with smoking, the savings are substantial. A pack-a-day smoker typically spends several hundred pounds a month, whereas a vaper using a 100ml shortfill and a coil or two usually spends a small fraction of that. Individual circumstances vary, and money is only one reason to quit, but it is a significant one for many people.

Where does value fall down? A large bottle is poor value if you do not finish it. Flavour fatigue is the most common reason people end up with half a bottle left over, so if you have never tried a candy cane or peppermint liquid before, consider whether you will enjoy it for a few weeks before committing to 100ml. Another weak point is that very sweet liquids use up coils faster, which adds a small but real running cost.

Overall, if you already know you like sweet mint flavours and you vape in a sub-ohm or open pod setup, the 100ml format offers solid value for money. If you are unsure about the flavour, a smaller bottle first is the lower-risk way to find out.

Honest comparisons, UK rules and recycling

It is fair to compare Yeti Candy Cane with the other routes into a sweet mint flavour, because the right choice depends on what you value.

• Versus a 10ml nicotine salt: nic salts, capped at 20mg/ml in the UK, give a smoother hit at higher strengths and suit tighter, lower-powered pod kits. They are better for heavier smokers who need more nicotine. A 100ml shortfill is cheaper per ml, gives bigger vapour and suits sub-ohm devices, but cannot easily reach high strengths.
• Versus a 50ml shortfill: a 50ml bottle holds around 50ml of liquid with room for one shot, which gives about 3mg. It is a good trial size for a new flavour. The 100ml bottle costs less per ml but commits you to more of a single flavour.
• Versus straight peppermint or menthol liquids: these are usually cooler and less sweet. If you want a sharp, icy hit, a menthol or ice liquid may satisfy you more. Candy Cane Original aims at a rounder, sweeter and gentler cooling.
• Versus premium craft brands: boutique makers often layer more complex notes and charge more per ml. Yeti is more of a mainstream value line. If you want subtle flavour development and are willing to pay for it, a craft brand may suit you better, though for a simple candy flavour the gap is smaller than with complex dessert blends.
• Versus other candy cane or seasonal liquids: several UK brands release festive mint flavours. They differ in sweetness and cooling, so reading reviews and comparing the VG/PG ratio and recommended wattage will tell you more than the name does.
• Versus disposables: with disposables now banned, this is partly academic, but a refillable shortfill setup offers more control, lower cost per ml and far less waste.

A few UK rules are worth knowing. You must be 18 or over to buy vaping products, and retailers are expected to verify age. Nicotine e-liquid and nic salts are limited to 20mg/ml, and bottles of nicotine liquid are limited to 10ml, which is why the shortfill and shot system exists. Tank capacity on refillable devices is limited to 2ml for sale in the UK, which is another reason sub-ohm tanks are sold with extension glass and why you may need to check what is included before buying.

On recycling, empty plastic bottles can usually go in household recycling once rinsed, and the Recycle Now website lists what each council accepts. Old devices, chargers and loose batteries belong at a proper drop-off point, not in the bin. Many vape shops and some supermarkets take them back, and every council area has a recycling centre that accepts small electricals. The Recycle Your Electricals postcode search is a quick way to find the nearest one.