VooPoo VMATE Infinity Edition Pod Kit 4

Overview

The VooPoo VMATE Infinity Edition Pod Kit 4 by Voopoo in 4 at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

VooPoo VMATE Infinity Edition Pod Kit overview

The VooPoo VMATE Infinity Edition Pod Kit is a rechargeable, refillable pod system from VooPoo, the Shenzhen manufacturer behind the Drag mod series, the PnP coil range and the Argus pod line. The VMATE family sits at the simple end of VooPoo's catalogue. There are no menus to learn, no wattage dial to adjust and no coils to build. You fill a pod with e-liquid, click it into the body and inhale. The Infinity Edition refreshes the original VMATE idea with updated pod hardware and a wider spread of finishes, while keeping the slim, pocketable, draw-activated format that suits people moving away from cigarettes or away from single-use vapes.

That second group matters in 2026. Single-use vapes have been banned from sale in Great Britain since 1 June 2025, so adults who relied on throwaway devices now need a reusable alternative. A refillable pod kit is exactly that. The battery recharges over USB-C, the pod takes a refill from a bottle of e-liquid, and the coil is a replaceable part rather than a sealed unit that ends up in a drawer or a bin. Over a few months, one kit replaces dozens of disposables, which cuts waste and usually cuts cost as well.

This listing covers the kit itself. E-liquid is sold separately, so you choose your own flavour and nicotine strength. The listing has 11 variants, which are finish and colour options for the device body rather than different flavours. Pick the one you like the look of; the internals are the same across the range.

As a guide to what is normally in the box, kits of this type include:

• The VMATE Infinity Edition battery body
• One or two refillable pods, depending on the bundle shown on the listing
• A USB-C charging cable
• A user manual and warning card

A few UK rules shape how this product is sold and used. Nicotine e-liquid is capped at 20mg/ml, and that cap applies to every nicotine e-liquid on the UK market, not just disposables. Refill bottles are limited to 10ml, refillable tanks and pods are limited to 2ml, and you must be 18 or over to buy or use the product. We check age at the point of sale and the courier may ask for ID on delivery.

In short, the VMATE Infinity Edition is a straightforward, entry-level device that does the basics reliably. It is not trying to be an enthusiast product, and it is more useful once you are clear about what it is for. The sections below go through the specifications, the performance you can expect, the flavour and nicotine choices, daily use, troubleshooting and how it compares to the other kits you are likely to be weighing up.

Specifications at a glance

Manufacturer figures differ slightly between regional batches, and UK stock is sized to local rules, so treat the table below as a working summary and check the listing for the exact numbers on the version you are buying.

• Device type: refillable pod kit, draw-activated (no fire button needed for normal use)
• Battery: built-in rechargeable cell, rated at around 900mAh in the VMATE family
• Charging: USB-C, typically about an hour from empty with a standard 5V adapter
• Pod capacity: international specification quotes 3ml; UK-market kits use a pod sized to the 2ml limit for refillable devices
• Coil type: mesh coils in the 0.7 ohm to 1.0 ohm range, built into the pod
• Output: fixed, with a maximum in the high teens of watts according to the maker
• Filling: side or top fill port with a silicone bung
• Airflow: a single inhale path tuned for a restricted, mouth-to-lung style draw
• Protections: short-circuit, low-resistance, over-time and low-battery cut-offs, as standard on current pod devices
• Intended e-liquid: nicotine salt or freebase, 50/50 or 60/40 VG/PG ratios work best

A note on the pod size. Outside the UK you will see the VMATE Infinity described with a 3ml pod. In Great Britain, refillable tanks and pods above 2ml cannot be sold, so UK retail versions use a smaller pod. That does not change how the device behaves. It simply means you refill a little more often, and a 2ml pod is easier to keep clean and fresh anyway.

The headline numbers say something about the kind of device this is. A battery of around 900mAh with a fixed output and a mesh coil is a standard mid-range pod configuration. It is built for people who want a steady, predictable draw rather than adjustable power. If you want to change wattage, swap coils with different resistances for different tastes, or build your own coils, a kit with a variable-wattage chip and open-style tank is the better route. If you want a device you can fill and use without thinking, these specs are what you want.

The 11 variants share the same electronics and pod system. Colour is a matter of taste, though darker finishes tend to hide pocket wear better and lighter finishes show fingerprints more readily. If you intend to buy a second device as a backup, choosing two different colours makes it easy to tell them apart, for example one kept at home with a tobacco flavour and one in a bag with a menthol.

Performance and puff delivery

Pod kits do not carry puff counts the way disposables do, because the number of puffs depends on how much e-liquid you put in, how long you draw and how much power the coil gets. Still, a rough guide is useful. On a 2ml pod, most users get somewhere between 500 and 800 puffs from a fill, with shorter two-second draws at the higher end and long, slow draws at the lower end. That is an estimate rather than a measured guarantee, and it is worth treating as a range.

Because the pod is refillable, the device does not stop when the first 2ml is gone. You top it up, and the coil keeps going until it wears out. A mesh coil in a pod like this typically lasts one to three weeks, depending on how often you vape and what you put in it. Sweet e-liquids with a lot of sweetener shorten coil life faster than unsweetened tobacco and menthol styles. Heavy use shortens it too. A rule of thumb is that if the flavour starts to taste flat, burnt or muted after you have refilled with fresh liquid, the coil is finished and the pod is due for replacement.

What the draw feels like is the more important question. The VMATE format is a restricted, mouth-to-lung draw. You pull slowly for a few seconds into your mouth and then inhale into the lungs, much as you would on a cigarette. The throat hit is moderate with nicotine salts and noticeably smoother than with freebase nicotine at the same strength. Vapour production is modest. If you are coming from a large sub-ohm tank, the cloud will look small. If you are coming from a disposable, it will look similar or slightly fuller.

Here is what to expect in everyday use:

• Warm-up: near instant. The device fires as soon as you start to draw, with no ramp-up or delay
• Consistency: output is fixed, so the last puff of a charge feels much like the first until the low-battery cut-off steps in
• Throat hit: light to moderate at 10mg nic salt, firmer at 18 to 20mg
• Vapour volume: modest, discreet and quick to disperse
• Noise: a faint hiss on the inhale, no clicking or buzzing

Performance depends on keeping the pod healthy. Priming a new pod properly, not over-filling, and not chain-vaping will each make a visible difference. Dry hits, popping noises and a burnt taste almost always trace back to a pod that has not fully wicked or has run low on liquid. The troubleshooting section covers those problems in detail.

Compared with a disposable, the main change is control. You choose the liquid, the strength, how much you put in and when you replace the coil. That control is also where most of the cost saving comes from, since a bottle of e-liquid and a pack of pods costs less per puff than the equivalent number of single-use vapes.

Flavour profile and e-liquid pairing

A pod kit has no flavour of its own. The taste comes from the e-liquid you put in the pod, and the device shapes how that liquid is delivered. The mesh coil in the VMATE pod runs at a moderate temperature, which tends to give a clean, accurate flavour with enough warmth to keep fruit notes bright and tobacco notes smooth. It does not run as hot as a high-power sub-ohm coil, so very sweet, very thick liquids can taste slightly muted compared with how they would taste on a hotter device.

The following styles work well in a pod of this type, and they cover most of what UK vapers actually buy:

• Blue raspberry and blue razz ice: sharp, sweet and cooling, and easily the most common pod flavour in the UK. The menthol-style coolant carries well on a mid-temperature coil
• Strawberry kiwi: bright fruit with a slightly tart finish, which stays clear on mesh
• Mango ice: thick tropical sweetness balanced by a cold exhale
• Peach and grape combinations: softer, rounder fruit blends that suit lower nicotine strengths
• Cola and energy drink styles: fizzy and sweet, which suit shorter, sharper draws
• Classic tobacco: a good option for people leaving cigarettes, since it matches what they are used to
• Menthol and mint: clean and cooling, with a very low coil-gunk rate, which helps coil life
• Dessert and custard blends: rich but heavier, so they gum up coils faster. Keep a spare pod nearby if you favour these

The ratio of vegetable glycerine to propylene glycol matters on a small pod. A 50/50 blend wicks quickly through the mesh and gives a firmer throat hit with a stronger flavour. A 60/40 or 70/30 VG-heavy blend is thicker, produces more vapour and has a rounder feel, but it wicks more slowly and is more likely to cause dry hits on a 1.0 ohm coil if you draw hard and fast. Most nicotine salt liquids are sold as 50/50, which is a safe starting point for a device like this.

If you are switching away from a disposable, it helps to buy a bottle of the same flavour type you already like. Familiar tastes make the change easier and reduce the chance of going back to smoking because the new setup does not feel right. Once you are comfortable, experiment with one or two different flavours at a time rather than stocking a dozen bottles.

Changing flavours is straightforward. Empty the pod, rinse the outside with a dry tissue, and refill. A fully clean swap is not possible without replacing the coil, so a faint trace of the previous flavour can carry through the first few puffs. If you like to rotate between several flavours, a second pod makes that far easier. Keep a note of which pod holds which liquid so you do not mix them up.

Design and build quality

The VMATE Infinity Edition is a compact, rounded-rectangle device, slightly wider than it is thick, which sits comfortably in a closed hand and slides into a jeans pocket without bulging. The body is made from a zinc-alloy shell with a coated finish, which gives it a solid feel for the price. Alloy is heavier than plastic, but it resists cracking when dropped, and it handles being carried with keys and coins better than a plastic shell does. The coating can mark with long use, particularly around the edges, which is normal for any painted metal device.

The pod clicks in from the top. It seats on a pair of magnetic or friction contacts, depending on the batch, and the fit is firm without being fiddly. A properly seated pod does not wobble, which matters because a loose pod is a common cause of misfiring. The mouthpiece is a slim, flat-ended design with a comfortable bite and a moderately narrow opening, in keeping with the restricted draw style of the device.

A few design features are worth mentioning:

• Draw activation: no button needed for normal use, so there is nothing to press by accident in a pocket
• LED indicator: a small light shows when the device fires and gives a basic battery status, including a low-battery warning
• USB-C port: on the bottom edge, so the device can stand upright on a desk while charging
• Fill port: sits on the pod rather than the body, so you can refill without removing the pod from the device if you prefer
• Silicone seals: the bung and mouthpiece seals are replaceable-feeling parts that keep the pod leak-resistant under normal conditions

Build quality is what you would expect at this price point from an established brand. The seams are tight, the buttonless face makes for a clean, simple look, and the finish options are varied enough that most people will find one they like among the 11 variants. This is not a luxury item and does not pretend to be, but there are no sharp edges or loose parts out of the box.

One real-world point about pod devices in general: they can leak if you treat them roughly. Carrying a freshly filled device in a pocket on a hot day, in a bag that gets squashed, or on an aeroplane (where the pressure change pushes liquid around) all increase leak risk. Keep the device upright where you can, avoid filling past the fill line, and wipe the mouthpiece and contacts if you see any residue. If liquid gets onto the contacts, wipe them with a dry cotton bud and let the device sit for a few minutes before using it.

The overall impression is of a tidy, durable everyday carry device. It will not draw attention, and the weight is reassuring rather than burdensome.

Battery and charging

The VMATE family uses a built-in rechargeable cell rated at around 900mAh. That is a mid-sized capacity for a pod kit, enough to cover most of a day of moderate use but not enough to ignore for several days. For reference, a 900mAh cell feeding a mesh coil at the output level this device uses typically delivers somewhere in the region of 600 to 1,000 puffs per charge, depending on draw length and how often you vape. Heavy users who vape all day will probably charge once a day. Lighter users may charge every second day.

Charging is by USB-C, which is now the standard connector for nearly all new phones, power banks and laptops. If you already own a USB-C cable, you will not need anything special. A standard 5V adapter at 1A to 2A is fine. There is no need for a fast-charge brick, and it is better not to use one. Fast chargers are designed to negotiate higher voltages with compatible devices, and while a properly built device ignores that, using a basic 5V charger removes any doubt.

Good charging habits help the battery last:

• Charge before it is completely flat, ideally once the indicator starts flashing
• Do not leave it charging overnight on a bed, sofa or other soft surface. Use a hard, non-flammable surface such as a desk or table
• Unplug it once it is full. Most devices stop charging automatically, but there is no benefit to leaving it connected
• Use only a cable and adapter in good condition. A frayed lead is a risk with any rechargeable product
• Do not charge a device that is hot, wet or visibly damaged
• Keep it away from direct sunlight, a car dashboard or a radiator

Most users find that a full charge takes around an hour from empty. The indicator light changes colour or stops flashing when charging is complete, though the exact pattern is shown in the manual. A small red or amber light during charging is normal.

Batteries lose capacity gradually over hundreds of charge cycles. After a year or more of daily use you may notice that a charge does not last quite as long as it did when the device was new. That is a normal property of lithium cells rather than a fault. When the device reaches the end of its life, do not put it in the household bin. Vapes and the batteries inside them are covered by waste electrical rules and can start fires in bin lorries and recycling plants. Take it to a household waste recycling centre, or to a supermarket or high street store with a small electricals drop-off point. Many retailers that sell vaping products also take back old devices. Pods, empty bottles and e-liquid residue should be disposed of according to your local council guidance.

If the device refuses to charge, try a different cable and adapter first, clean the USB-C port gently with a dry wooden toothpick, and check that the pod is fully seated. If none of that works, contact us so that we can look into it under your statutory rights.

Pod and coil technology

The coil is the part that turns e-liquid into vapour, and it lives inside the pod. The VMATE Infinity Edition uses mesh coils rather than the older round wire coils found in many low-cost pod kits. A mesh coil is a thin, flat sheet of metal with a pattern of small holes cut or etched into it. Compared with a single round wire, a mesh has far more surface area in contact with the cotton that feeds it, which means e-liquid is heated more evenly and the whole coil warms up faster. In practice, that gives better flavour, a smoother draw and a reduced chance of one hot spot scorching the cotton.

Mesh coils in this pod family are offered in resistances of roughly 0.7 ohm and 1.0 ohm. The difference is straightforward:

• 0.7 ohm: draws a little more current, warms faster and produces more vapour and warmth. It suits nicotine salts in the 10 to 20mg range and users who prefer a fuller draw
• 1.0 ohm: runs cooler and more gently, which is easier on battery life and gives a tighter, more cigarette-like draw. It suits higher-strength nicotine salts and users who like a restricted pull

Both options fit the same pod socket, so you can try one and switch to the other later if you find it is not right. Check the listing or the pod packaging to confirm which resistance is supplied with the kit, because that affects how you should choose your first bottle of e-liquid.

Behind the mesh, the pod uses organic cotton wicking to carry liquid from the reservoir to the coil. Wicking speed is what separates a good pod from a frustrating one. If the cotton does not take up liquid as fast as the coil burns it, you get a dry hit. That is why priming matters: dripping a few drops of liquid directly onto the cotton through the inlet holes, and then letting the pod sit for five to ten minutes after filling, gives the cotton time to saturate. Skipping this step is the most common reason a new pod tastes burnt for the first few puffs.

There are a few practical facts about pod coils to keep in mind:

• Coils are consumable. Expect to replace the pod every one to three weeks
• Sweeteners such as sucralose build up as sticky residue on the mesh and are the main reason coils fail early
• Chain-vaping gives the cotton no time to recover and shortens coil life
• Running a pod nearly dry, even once, can leave a burnt taste behind that fresh liquid will not fix
• Always check that you are buying pods that match your device. The VMATE family has several pod generations, so confirm the exact pod name on the listing before ordering spares

The device also includes the standard protections you would expect from current pod hardware: short-circuit detection, a cut-off if the coil resistance is out of range, a limit on how long a single draw can last, and a low-battery shut-off. These work in the background and you will rarely notice them, but they are part of why a regulated pod device is a safer proposition than an unregulated mechanical setup.

Nicotine strength guidance

Because the kit takes your own e-liquid, nicotine strength is your choice. The wrong strength is a common reason people give up on a new device, so it is worth thinking about it before you order. In the UK, the maximum strength for any e-liquid is 20mg/ml, and the range is usually sold at 0mg, 3mg, 6mg, 10mg, 12mg and 20mg. Nicotine salt liquids are usually sold at 10mg and 20mg, with some brands also offering 5mg and 18mg.

The device and coil combination here suits nicotine salt e-liquids. Salts are smoother at higher strengths than freebase nicotine, which makes a 20mg salt feel like a 10 to 12mg freebase on the throat. Freebase liquids in the 3 to 6mg range also work, although they are more commonly used in larger, more powerful devices.

As a rough starting point, based on how people tend to use this type of hardware:

• Heavy smokers (20 or more cigarettes a day, first cigarette within 30 minutes of waking): 18 to 20mg nicotine salt
• Moderate smokers (10 to 20 a day): 10 to 12mg nicotine salt, moving up to 18mg if you still crave cigarettes
• Light smokers and social smokers: 5 to 10mg nicotine salt
• Current disposable users: most UK disposables are 20mg, so 18 to 20mg is the closest match. If you are used to a 10mg disposable, start at 10mg
• Reducing nicotine over time: step down one strength at a time and give each step a few weeks before moving again
• Non-smokers: there is no need to start. Nicotine is addictive, and vaping is not recommended for anyone who does not already smoke

These figures are general guidance, not medical advice. If you are not sure which strength is right, a local stop smoking service or pharmacist can advise you, and many offer free support. Too low a strength leads to constant puffing, a shorter battery life, a lot of e-liquid used and a risk of going back to cigarettes. Too high a strength leads to dizziness, nausea, sweating, a racing heartbeat or an overly harsh throat hit. If you feel any of those symptoms, stop and sit down, drink some water, and step down to a lower strength next time.

It helps to buy two strengths at first, for example a 10mg and a 20mg bottle of the same flavour. You can then mix them to find your own level, or use the stronger one for morning and the weaker one for the rest of the day. Be aware that a stronger liquid in a 0.7 ohm pod gives a stronger hit than the same liquid in a 1.0 ohm pod, because the lower resistance warms the liquid more. If you move from one to the other, you may want to adjust your strength.

The device contains no nicotine itself, and nothing in the kit needs the nicotine to be a particular strength. Everything depends on the bottle you choose.

Who it suits and who should skip it

The VMATE Infinity Edition is aimed at a fairly specific kind of user. Understanding whether you are in that group saves money and frustration.

It suits:

• Adult smokers moving to vaping: the restricted draw and nicotine salt compatibility resemble a cigarette more closely than a high-power mod does
• People leaving disposables: the single-use ban means many vapers need a reusable replacement, and this is a close step up in terms of simplicity
• People who value simplicity: there are no menus, no adjustable power and no coil building, so there is almost nothing to get wrong
• Anyone who wants to cut running costs: a bottle of e-liquid and an occasional pod are cheaper per puff than a disposable
• People who carry a vape all day: the compact size and draw activation make it easy to pocket
• Those who want a backup device: at this price a second kit makes sense as a spare for travel or for a different flavour

It is worth skipping if:

• You want big clouds: a restricted pod will not produce the vapour a sub-ohm tank does
• You want adjustable wattage or airflow: the output is fixed and the draw is restricted. A variable-power pod mod gives you control that this does not
• You like tinkering: a kit with rebuildable options or replaceable standard coils will suit you better
• You vape very sweet, thick dessert liquids all day: they gum up small coils fast, and you may find the pod costs add up
• You want the longest possible battery life: a larger cell or a device with a higher capacity will go several days between charges
• You do not currently smoke or vape: nicotine is addictive and this product is not intended for non-smokers or for anyone under 18

Consider your own pattern of use. If you vape once or twice an hour and carry the device in a pocket, this is a comfortable fit. If you vape continuously through the day and want to forget about charging, you will probably want to carry a spare pod and a power bank. Many people get on well with two devices, one on charge and one in use, which keeps a fresh pod and a full battery available at all times.

Finally, think about where the product fits in your plans. Vaping is much less harmful than smoking for adult smokers who switch completely, but it is not risk-free. If your aim is to quit nicotine, a step-down plan with lower strengths over several months is a common route, and the VMATE can support that as long as you buy liquids in decreasing strengths.

How to fill, activate and use it

Setting up the VMATE Infinity Edition takes a few minutes and uses no tools. Follow these steps for a clean first start, and repeat the filling steps whenever you top up.

• Step 1, charge first: plug the device into a USB-C cable and let it charge fully before first use. Even if there is some charge out of the box, a full first charge sets a good habit
• Step 2, unpack the pod: remove any packaging or protective film from the pod and mouthpiece. Check that the silicone bung is present at the fill port
• Step 3, open the fill port: pull back or lift the silicone bung. Keep the pod upright as you do it
• Step 4, fill with e-liquid: angle the bottle nozzle into the fill hole and add liquid slowly. Stop at or just below the maximum line. Do not overfill, and do not let the liquid run into the central air tube
• Step 5, close the port: press the bung back in fully. A partly seated bung is a frequent cause of leaks
• Step 6, wait: leave the filled pod upright for five to ten minutes so the cotton can soak up the liquid. This matters most with a brand-new pod and with thicker, VG-heavy e-liquids
• Step 7, insert the pod: push it into the device until it seats firmly
• Step 8, take a few gentle draws: use short, soft pulls without firing at full length at first, to finish wetting the coil, then move on to normal draws

There is no switching on and off in normal use. The device is draw-activated, so it fires when you inhale through the mouthpiece. Take a slow, steady draw of two to four seconds. Longer draws are not needed and run through your liquid and battery faster. Release at the end of the draw, wait a moment, and repeat. If the manual for your batch lists a button sequence for locking the device, such as pressing a number of times to switch it off for travel, follow that. It is a useful feature for bags and pockets.

Good habits while using it:

• Refill when the liquid is about a quarter full rather than letting it run empty
• Keep it upright when you can, especially when it is full
• Wipe the mouthpiece with a dry tissue from time to time
• Do not vape in places where it is not allowed. Rules differ between workplaces, trains, pubs and public transport, so follow the signs
• Keep the device and e-liquid out of reach of children and pets. Nicotine e-liquid is poisonous if swallowed, and bottles are child-resistant but not child-proof

When you replace the pod, pull the old one out gently, empty any remaining liquid into a tissue, and put the old pod aside for disposal. Pods with e-liquid residue should go in general waste or, if your area collects them, in the small electricals stream along with the device itself. Do not pour left-over e-liquid down a drain. Soak it into a tissue and bin it, or take it to a household waste site.

Troubleshooting common problems

Most problems with pod kits come down to a short list of causes, and most are quick to fix at home. Work through them in order before assuming the device is faulty.

The device does not fire or the light flashes:

• Check the battery. A flashing low-battery indicator means it needs charging
• Remove the pod and reseat it, making sure it clicks in fully
• Wipe the metal contacts on the pod and the device with a dry cotton bud
• Try a different pod if you have one, which tells you whether the issue is the pod or the body
• A flashing pattern after firing often means the device has detected a coil problem, such as no liquid or a short circuit

Burnt or dry taste:

• The pod may be low on liquid. Refill and wait five to ten minutes
• The coil may have reached the end of its life. If the burnt taste continues after a fresh fill and a rest, replace the pod
• You may be drawing too hard or chain-vaping. Take shorter, slower draws with a pause between them
• The liquid may be too thick for the coil. Try a 50/50 blend

Leaking:

• Confirm the bung is pushed in fully and the pod is not overfilled
• Check for hairline cracks around the pod base
• Keep the device upright and avoid squeezing it in a pocket or bag
• If liquid reaches the contacts, wipe them dry and allow a few minutes before using again
• Temperature and pressure changes, such as on a flight, can push liquid out, so carry the device empty on aeroplanes

Gurgling or popping noises:

• Condensation or liquid in the air path is the usual cause. Blow gently through the mouthpiece (with the pod removed) or wipe it with a tissue
• Over-filled pods are more prone to this

Weak vapour:

• The coil may be worn or gunked up. Replace the pod
• The battery may be low. A weak charge lowers the output
• The liquid may be too thick, or the pod may not have been primed long enough

Will not charge:

• Try another cable and adapter
• Clean the USB-C port with a dry wooden toothpick, being careful not to bend the contacts
• If the device gets unusually hot while charging, unplug it immediately and do not use it again until it has been checked

If you have been through these steps and the device still behaves oddly, contact us with your order number and a short description or photo of the issue. A faulty device bought from us is covered by your statutory rights under the Consumer Rights Act 2015, which require goods to be of satisfactory quality and fit for purpose. We will not ask you to carry out repairs that could be unsafe, and you should never try to open the battery compartment or modify the cell.

Value for money and how it compares

The value case for a refillable pod kit is clearest when you compare it with disposables. A typical single-use vape of the kind that used to be sold in the UK cost roughly the price of a pack of cigarettes for a few hundred puffs. With the disposable ban in place, those are no longer an option, but the cost logic still applies if you are comparing with refill pods or pre-filled cartridges. A refillable kit asks for an initial purchase, then a bottle of e-liquid and a replacement pod every couple of weeks. For most regular vapers that works out noticeably cheaper over a month or two, and cheaper still over a year.

Running costs break down roughly as follows:

• The kit: a one-off purchase that lasts many months with care
• E-liquid: a 10ml bottle of nicotine salt typically lasts several days to over a week of regular use
• Pods: one every one to three weeks, bought in multi-packs for a lower unit cost
• Charging: negligible electricity cost

It is fair to put the VMATE Infinity Edition next to other widely sold pod kits in the same class, since people usually choose between several. These comparisons are general, and specs vary by batch.

• Vaporesso XROS series: a popular line with a similar sized battery in the upper end of the range, magnetic pods and a slightly wider coil choice. The XROS has stronger name recognition and a bigger pod range. The VMATE is simpler and generally lower priced
• SMOK Novo series: long-established, with a wide range of pods and a draw-activated format. Pod availability is good. The VMATE matches it on basic function and offers a different design and coil approach
• Uwell Caliburn range: well regarded for flavour on its pods, with a solid reputation in the UK. It tends to cost slightly more. If flavour and a tried-and-tested pod system are your priorities, it is a reasonable alternative
• OXVA Xlim series: offers more adjustability on some models, including airflow. If you like to tune the draw, it is worth looking at
• Geekvape Wenax range: a competitive choice at a similar price, with its own pods and a loyal following

None of these is clearly ahead of the others on every measure. They are all competent pod systems, and the right choice depends on what you value. The VMATE Infinity Edition is a sensible pick if you want an uncomplicated, solidly built, draw-activated kit from a brand with a long record of making vaping hardware, and if you like the look of one of the 11 finish options.

Before you buy, consider whether you need spare pods from day one. Buying a multi-pack of pods with your first order means you will not be stuck when the first coil wears out, and the unit price is usually lower in a pack. Add a bottle or two of e-liquid in a strength that suits you, and you will be ready to switch fully rather than falling back on cigarettes while you wait for a delivery.