Geekvape Aegis X Zeus Kit 7

Overview

The Geekvape Aegis X Zeus Kit 7 by Geekvape in 7 at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Geekvape Aegis X Zeus Kit overview: a tough dual-battery mod with a mesh sub-ohm tank

The Geekvape Aegis X Zeus Kit pairs the Aegis X, a dual-battery box mod built around a rubberised, impact-resistant shell, with the Zeus sub-ohm tank, a mesh-coil tank designed for a large, warm, direct-to-lung style of vaping. It is a refillable, rechargeable system. There is no pre-filled liquid in the box and nothing about it is single use: you buy the hardware once, then keep it running with e-liquid, replacement coils and a pair of 18650 batteries.

Geekvape built its reputation on the Aegis line, a run of devices sold on durability. Shock resistance, dust resistance and water resistance go well beyond what most pocket vapes attempt, and the Aegis X carries that idea into a 200W-class, two-cell chassis. The Zeus tank gives it a coil system that is straightforward to live with, with a top-fill design, adjustable airflow and mesh coils that are easy to swap. Together they suit people who want sub-ohm power without having to baby the hardware.

This page covers what the kit does well, where it asks something of you, and where a different device would make more sense. We have kept the claims grounded. Where a figure depends on your batteries, your coil or your e-liquid, we say so rather than quoting a headline number you may never see in daily use. Treat the specification panel on the product listing as the final word on exact figures, because manufacturers revise small details between production batches.

Eleven variants of the kit are listed in this family. Those are finish and colour options rather than flavours, because there is no e-liquid in the box. The electronics, tank and coils behave the same whichever finish you pick, so choose the one you will be happy to see every day. Stock on individual colours moves around, so if your first choice is sold out, check back or look at a neighbouring shade.

What to expect in the box:

• One Aegis X box mod (the batteries are not included)
• One Zeus sub-ohm tank in the 2ml format used for UK sales
• A mesh coil, usually pre-installed, and often a spare
• A USB charging cable
• Spare seals, a manual and warranty information

Contents can differ slightly between batches, so check the contents panel on the listing before you order. You will need to buy two matched, high-drain 18650 cells separately, and we cover how to choose them in the battery section below.

One legal note up front. This is a reusable kit, so the UK restrictions on single-use disposable vapes that took effect on 1 June 2025 do not apply to it. The normal rules do: you must be 18 or over to buy it, and any nicotine e-liquid you use is limited to 20mg/ml in the UK.

Key specifications and what they mean in practice

Specification lists can read like a wall of numbers, so here is the short version of what matters on the Geekvape Aegis X Zeus Kit and why. Where a figure is a manufacturer rating rather than something we have measured ourselves, we describe it that way.

• Power output: up to 200W in variable wattage. Very few coils are meant to run at that ceiling, so think of it as headroom rather than a target.
• Batteries: two removable 18650 cells, sold separately. Choose high-drain cells with a continuous discharge rating of 20A or more from a recognised brand.
• Tank: the Zeus sub-ohm tank, supplied in the 2ml UK format, with top filling and adjustable airflow.
• Coils: Geekvape mesh coils in sub-ohm resistances. The recommended wattage range is printed on each coil head, and that range matters more than the mod's maximum.
• Connection: standard 510 thread, which means the mod will also accept other 510 tanks if you ever want to experiment.
• Protection: Geekvape markets the Aegis range with IP68-class resistance to water and dust, plus drop resistance. That rating applies when the battery door is closed and any port cover is seated.
• Charging: a USB-C port on the mod for in-device charging, which is convenient but slower and less controlled than a dedicated external charger.
• Controls: a fire button with up and down buttons, and a compact display showing wattage, battery level and coil resistance.
• Modes: variable wattage as the everyday mode, with further modes on the chipset that most users never need. Check the manual for the full list.

The practical reading of that list is this. The two-battery layout gives the mod the voltage it needs to drive low-resistance mesh coils without straining. The 2ml tank is smaller than you may be used to if you have vaped abroad, and that is down to UK law rather than Geekvape's design choices. The 510 connector is the part of the specification that quietly adds the most long-term value, because it means the mod is not locked to a single tank forever.

It is worth being clear about what the kit is not. It is not a pod system with a sealed cartridge, it is not a low-wattage mouth-to-lung device, and it is not a pocket-sized stealth vape. It is a full-size sub-ohm kit, and it behaves like one. If that is the category you want, the numbers above are reassuring. If you wanted something small and quiet, a pod kit is a better starting point, and the same shop carries several.

Performance and vapour delivery

Performance on a kit like this comes from three things working together: the power available from the batteries, the coil's resistance and surface area, and how the airflow is set. The Aegis X supplies plenty of the first, the Zeus mesh coils supply the second, and the tank's adjustable airflow ring lets you tune the third.

In everyday use most people settle somewhere between roughly 45W and 80W, depending on which coil is fitted. In that window the Zeus produces a dense, warm cloud with a smooth ramp-up, meaning the vapour arrives quickly after you press the button rather than after a pause. Mesh coils heat across a wide surface, so the vapour tends to feel even from the first draw to the last, without the hot spots a thin round wire can produce.

The 200W ceiling matters less than you might think. Pushing a coil far beyond its recommended range does not produce a better vape. It produces a hotter one, with a harsher throat hit, quicker coil wear and a burnt note that no flavour can hide. The sensible approach is to start at the low end of the range printed on the coil, take a few draws, and then nudge the wattage up in small steps until the flavour and warmth feel right. Most people find their sweet spot a few watts above the bottom of the range.

How much liquid will it use? Sub-ohm vaping is thirstier than pod vaping. As a rough guide, a 2ml tank at 50 to 70W lasts somewhere in the region of 100 to 200 draws, depending on how long you hold each one. That is an estimate rather than a measured figure. Kits do not carry a puff count in the way sealed disposables do, because the number depends entirely on you. What it does mean is that you will refill more often than you would on a larger-tank setup, and that top-filling needs to be quick and clean. It is, on the Zeus.

Airflow behaviour. Open the airflow fully for a loose, cool, cloud-heavy draw, or close it down a little for more resistance and a warmer, more flavourful one. The ring turns smoothly and holds its position, which sounds minor until you have used a tank where it drifts in a pocket.

Heat management. Because the Aegis X has a large battery compartment and a dense chassis, it handles back-to-back draws calmly. The tank, in common with any sub-ohm tank, will warm up during a long session. That is normal. If the drip tip becomes uncomfortable, you are either chaining draws too tightly or running above the coil's range.

Flavour: what to expect and which e-liquids suit it

A hardware kit has no flavour of its own, so this section is about how the Geekvape Aegis X Zeus Kit treats whichever e-liquid you choose. In short, the Zeus mesh coils are good at carrying detail. Because the mesh surface is large and the heat is spread evenly, the layers of a flavour tend to arrive in order rather than all at once, which is useful with complicated recipes.

The eleven variants in this family differ in colour, not taste. If you are shopping for flavour, you are really choosing e-liquid, and these are the directions that work well on a sub-ohm tank like this one:

• Blue raspberry ice: a sharp, sweet fruit with a cooling finish. The wide mesh surface keeps the cooling agent from overwhelming the fruit.
• Strawberry kiwi: a bright, juicy pairing that shows off the tank's clarity at moderate wattage.
• Menthol or spearmint: clean, simple profiles that are forgiving and rarely gunk up a coil.
• Classic tobacco: a fair choice for ex-smokers, though tobacco recipes often taste thin at very high wattage, so keep it modest.
• Vanilla custard: rich and creamy desserts, which reward slightly lower wattage and a little more airflow restriction.
• Cola: fizzy and sweet, with a recognisable bite that holds up well to heat.
• Peach ice tea: a light, refreshing mix that suits warm-weather vaping and big airflow.
• Mixed berries: a layered fruit blend that works well as an all-day option.

Choose the right base. Sub-ohm tanks need a thicker liquid than mouth-to-lung devices. Look for 70VG/30PG or 80VG/20PG. Thinner 50/50 liquids can flood the coil and leak at low airflow, while very thick ones can struggle to wick on the lowest-resistance heads. If a liquid is sold as a shortfill, it is usually already in the right ratio for a kit like this.

Watch the sugar. Dessert and heavily sweetened fruit liquids leave caramelised residue on the coil. That is not a fault in the tank. It is chemistry, and it shortens coil life. If you notice flavour fading after only a few days, a sweeter liquid is the most common cause, and switching to a drier profile for a while often brings it back.

Prime properly and let it rest. The single biggest influence on flavour in the first hour is whether the new coil was soaked before use. We cover that in the setup section. A rushed first draw on a dry coil can taste burnt for the rest of that coil's life, no matter how good the e-liquid is.

One practical habit worth adopting: when you change flavour, change the coil, or at least run a few draws of the new liquid before judging it. Mesh coils hold on to the previous liquid, and a menthol residue will happily ruin a custard.

Design and build quality

The Aegis X leans on the family look: a chunky body, rubberised texture and protective styling that signals durability before you have even picked it up. The shell is a zinc alloy frame wrapped in a grippy, leather-effect or textured finish depending on the colourway, and the texture has a practical purpose. It stays put in a wet hand or a cold pocket, and it hides fingerprints better than a polished metal body does.

Because it carries two 18650 cells, the mod is a proper handful. It is noticeably heavier and wider than a pod device or a single-battery mod, and fully loaded it has some weight to it. Most people find it comfortable in the hand and reasonable in a coat pocket, but it is not a trouser-pocket device if you prefer something discreet. If portability is a priority, factor that in before ordering.

Controls and screen. The fire button sits where the thumb naturally falls and has a firm, positive click. The adjustment buttons are close by and easy to use without looking. The compact display shows the information you actually need, namely wattage, remaining battery and coil resistance, and it is legible in daylight. Menus are simple enough that you will not need the manual for everyday adjustments.

Battery door. The compartment is the part of an IP-rated mod that matters most, because that is where water and dust would get in. The door closes against a seal and snaps shut with a satisfying firmness. Check the seal is clean and seated whenever you change batteries. A hair or a speck of debris on a gasket defeats the point of the rating.

The Zeus tank. It uses a stainless steel body with a glass section, a top-fill cap that slides or rotates aside, and an airflow ring with enough range to be useful. The finish matches the mod closely, so the pairing looks like one unit. Glass is the one fragile element on any tank, and it is worth knowing that replacement glass is a common spare to hold if you are rough on your gear.

Finishes. The family lists eleven colour options. Darker colours are the practical choice for a device that lives in a bag, while brighter finishes are easier to find when you put the mod down. The internals are identical whichever finish you choose.

Looking after it. The rating is not a licence to be careless. If the mod has been in water, dry it fully, open the battery door to let moisture out and wait before charging. Salt water, sugary liquids and heavy grime are harder on seals than clean water, so rinse and wipe accordingly.

Battery, charging and safe handling

The Aegis X runs on two removable 18650 cells, and they are not supplied. That is standard for the category and it works in your favour, because you can choose batteries to match your usage and replace them individually when they wear out. It also means you take on some responsibility for choosing and handling them properly.

Choosing cells. Buy two matching, high-drain 18650 batteries with a continuous discharge rating of at least 20A, from a reputable brand sold by a reputable supplier. Cheap unbranded cells and re-wrapped cells are the single biggest source of avoidable battery problems. Do not mix old and new cells, different brands or different capacities in the same device, and keep a pair together as a matched set for their whole life.

Capacity and runtime. Typical 18650 cells carry somewhere between roughly 2,500mAh and 3,500mAh. Mods in this class normally connect the two cells in series, which means the capacity you get is that of a single cell while the voltage doubles. As a rough illustration, a 3,000mAh cell at a nominal 7.4V pair works out to around 22Wh. At 60W that is about 22 minutes of actual firing time, which at three to four seconds a draw is in the region of 300 draws once conversion losses are allowed for. That is an estimate, not a promise, but it explains why heavier users carry a second pair of cells.

Charging. The mod has a USB-C port for in-device charging. It is handy when you are travelling, but it is a slower, less controlled way to charge than an external charger that handles each cell separately. If you vape every day, an external charger from a recognised brand is a worthwhile purchase and it extends the life of the cells. Whichever method you use:

• Never leave batteries charging unattended or overnight
• Use a charger and cable made for the job, not a damaged or unbranded one
• Stop using any cell that is dented, hot, swollen or has a torn wrap
• Charge on a hard, non-flammable surface rather than a bed or sofa

Carrying spare cells. Never carry loose 18650s in a pocket with keys or coins. Use a plastic battery case, because contact with metal can short a cell and cause serious heat. This is one of the more important safety habits in the whole hobby.

Disposal and recycling. Do not put lithium cells or vape hardware in your household bin or normal recycling. In the UK, spent batteries can be taken to battery drop-off points, which are in most larger supermarkets and local recycling centres. Electrical items such as the mod itself fall under waste electrical rules, and retailers who sell this type of product are expected to offer a take-back route. Tape over the terminals of any damaged cell before you drop it off.

The Zeus tank and its mesh coil technology

The Zeus is a sub-ohm tank, which means it takes coils with a resistance below one ohm. Lower resistance draws more power from the battery for a given voltage, produces more heat, and generates more vapour. The Zeus uses Geekvape's mesh coils rather than conventional round-wire coils, and that difference is the reason the kit feels the way it does.

Why mesh? A mesh coil is a flat sheet of resistance material formed into a cylinder, with a large number of tiny openings. Compared with a wire wrapped around a cotton core, a mesh sheet puts a much larger heated surface in contact with the cotton. That has three useful effects. Warm-up is quick because the surface heats fast. The heat is spread evenly, which reduces dry spots. And more liquid can be vaporised without the coil running dangerously hot, which is where the dense vapour comes from.

Coil resistances and wattage. Geekvape supplies the Zeus mesh coils in a range of sub-ohm resistances, and each head carries a recommended wattage band printed on the side. A lower-resistance coil gives more vapour and uses more power and liquid. A higher-resistance coil, closer to 0.4 ohm, is gentler on the batteries, uses less liquid and delivers a tighter, more flavour-forward draw. If you are new to sub-ohm vaping, the higher-resistance head is the more forgiving choice to start with. Check the packaging on the coil you have for its exact figures, because they vary from head to head.

Coil life. Mesh coils typically last somewhere between one and three weeks of daily use. The range is wide because the liquid you use has more influence than the coil does. Sweet, dessert and dark liquids shorten life, while clean fruit and menthol profiles extend it. A coil that is wearing out gives you clear signs: flavour flattens, vapour thins, and a slightly burnt or metallic taste appears even on fresh liquid. Replace it at that point, not after several days of tolerating it.

Changing the coil. The process is simple. Empty the tank if you wish, unscrew the base, pull the old head out, push the new one in and screw the base back on. Prime the new coil by dripping liquid onto the exposed cotton ports, then fill the tank and let it sit for several minutes before firing. Avoid touching the mesh itself, and always fit coils with the mod switched off.

Tank capacity in the UK. UK law limits the capacity of a refillable tank sold here to 2ml, and nicotine e-liquid bottles to 10ml. The Zeus supplied for our market follows that. If you have seen larger-capacity versions of the same tank online, those are for other territories. It is better to treat the 2ml format as part of the design and plan for quick, frequent top-ups.

Choosing the right nicotine strength

The kit itself contains no nicotine, which is why the strength field on the listing shows 0mg. What strength you end up vaping depends entirely on the e-liquid you pour in, and that choice matters more on a sub-ohm kit than on almost any other device, because high power and large vapour volume mean you inhale far more liquid per draw than you would on a pod.

UK limits. Nicotine e-liquid in the UK is capped at 20mg/ml, in bottles of no more than 10ml, and refillable tanks are limited to 2ml. Those limits apply to the liquid regardless of which device you buy, so you will see the same numbers on every compliant bottle. For this kit, a 20mg strength is almost never appropriate, and we would steer you away from it.

The key principle. The more vapour a device produces, the lower the nicotine strength needed. A sub-ohm kit at 50 to 80W delivers a lot of liquid per draw, so a strength that feels fine on a small pod can be harsh and excessive here. Starting low and moving up is easier than starting high and trying to recover from it.

• 0mg to 1.5mg: for occasional or social vapers, people who no longer smoke and want to cut nicotine down, and anyone who simply enjoys the flavour and the cloud.
• 3mg: the common starting point for lighter smokers or recent ex-smokers moving to a sub-ohm setup. It is also the strength many shortfill and nicotine shot combinations produce.
• 6mg: for people who smoked heavily and find 3mg unsatisfying at moderate wattage. Expect a noticeable throat hit, especially at higher power.
• 10mg and above (nicotine salts): generally a poor match. Salt-based liquids are designed for low-wattage, tighter-draw devices. At sub-ohm power the nicotine delivery becomes very strong and the throat hit unpleasant. If you prefer salts, a pod kit is the better tool.

Using shortfills. Many sub-ohm liquids are sold as 50ml or 100ml bottles with extra space left for nicotine shots. Adding a single shot to a 50ml bottle typically brings it to around 3mg, and a standard shot is usually 10ml at 18mg/ml. Read the label on the bottle for the exact quantity and ratio, shake well, and let the mixed liquid rest briefly before use.

Adjusting as you go. If you notice a headache, nausea, a racing pulse or dizziness, the strength is too high or you are drawing too often. Lower the strength or the wattage. If you find yourself chaining draws without satisfaction, the strength may be too low. Nicotine is addictive, and if you are not currently a smoker or vaper, this device is not for you.

Who the Aegis X Zeus Kit suits, and who should skip it

No device suits everyone, and a kit this size makes some trade-offs that are worth stating plainly. Here is a realistic picture of the buyer it fits and the buyer it does not.

It is a sensible choice if you:

• Want a sub-ohm, direct-to-lung experience with dense vapour and plenty of flavour detail
• Work outdoors, on site, in a workshop or anywhere a pocket device might take knocks, spills or dust
• Already own 18650 batteries and a charger, or are happy to buy them
• Like having the freedom to change e-liquid, coils and even the tank without replacing the mod
• Are moving on from disposables or pods and want more control over what you vape and what it costs
• Want a 510 mod that can take other tanks in the future

You should probably look elsewhere if you:

• Want something small and discreet. The two-cell body is large, and a pod device will be far easier to carry.
• Prefer a tight, cigarette-style mouth-to-lung draw. A low-wattage pod or a higher-resistance mouth-to-lung tank will suit you better.
• Want a device you can use straight from the box. A pod kit is simpler, because this one needs batteries, priming and some care.
• Vape high-strength nicotine salts. As covered above, they and a sub-ohm tank are a poor pairing.
• Are not prepared to look after lithium cells properly. Battery safety is a real responsibility on any removable-cell mod.
• Have never smoked or vaped. Vaping is for adults who already use nicotine and want an alternative, not for people who do not.

A word on first-time vapers. Because the kit works well with low-nicotine liquid, it can suit a beginner who is happy to learn. The learning curve is steeper than with a pod, though. You will need to understand coil priming, wattage ranges and basic battery care. If that sounds like a hobby you would enjoy, it is a rewarding kit to learn on. If you simply want to swap cigarettes for something simple, begin with a pod kit and move up to sub-ohm if you find you want more.

Age. You must be 18 or over to buy and use this product, and we may ask for age verification at or after checkout. Keep the device, liquids and batteries out of reach of children and pets.

How to set up and use the kit

Setting up the Geekvape Aegis X Zeus Kit takes about ten minutes the first time, most of which is waiting for the coil to soak. Follow these steps in order and you will avoid the usual early problems.

• Step 1, check the batteries. Inspect both 18650 cells for tears in the wrap and dents. Confirm they are the same brand, capacity and charge level. Charge them fully if they are new.
• Step 2, load the cells. Open the battery door and drop both cells in, matching the polarity markings inside the compartment. Close the door firmly and check that the seal is seated.
• Step 3, prepare the tank. Unscrew the base of the Zeus and make sure a mesh coil is fitted. Remove any plastic wrap from the coil and the tank. Wash the tank in warm water if it is brand new, then dry it fully.
• Step 4, prime the coil. Place a few drops of e-liquid directly onto the cotton through the openings on the side of the coil head. Fill the tank to just below the maximum line, and screw the base on.
• Step 5, let it soak. Leave the filled tank to stand for five to ten minutes, upright, so the cotton can saturate. Skipping this is the most common way people ruin a new coil.
• Step 6, attach and power on. Screw the tank onto the 510 connector firmly, not over-tightened. Most Geekvape mods turn on with five quick presses of the fire button, but confirm in the manual for this model.
• Step 7, set the power. Check the wattage range printed on the coil and set the mod to the lower end of it. The display should show the coil resistance, which confirms the connection is good.
• Step 8, take the first draws gently. Take two or three short, slow draws without firing at full length. This pulls liquid into the coil. Then raise the wattage in small steps until you reach the flavour and warmth you prefer.

Daily use. Draw slowly and steadily for three to five seconds, with a pause between draws. Keep the tank at least a third full, as running it low is the quickest way to scorch cotton. Refill through the top cap. Wipe up any spills before they reach the airflow slots or the connector.

Locking the device. Use the lock function, usually by pressing the fire button a set number of times, when the mod is in a bag or pocket. An accidental firing against the inside of a bag is both wasteful and a safety risk. Switch the mod fully off for travel.

Changing flavour. Empty the tank, wipe the inside, refill with the new liquid and run a few gentle draws. If the previous liquid was very strong, fit a fresh coil, because mesh holds on to residue.

Troubleshooting common problems

Most issues with a sub-ohm kit come down to a short list of causes, and nearly all of them are quick to fix. Work through the symptom that matches yours.

• Leaking from the airflow or base: check that the coil is seated firmly and that the base is screwed down fully. Make sure the seals are undamaged and not twisted. Thin liquids and over-filling are frequent causes, so use a 70VG-style liquid and keep the level just below the maximum line. Close the airflow slightly if flooding persists.
• Dry or burnt hits: the coil is not getting enough liquid. Re-prime it, let it soak longer, and lower the wattage. If the burnt taste persists on fresh liquid, the coil is spent and should be replaced. Never keep firing a dry coil.
• Gurgling or spitting: excess liquid has pooled in the airflow path. Wipe the drip tip, open the airflow a touch, and give the tank a gentle shake before use. Do not fill above the maximum line.
• The screen reports a coil error such as Check Atomizer: the connection between the tank and the mod is not made. Unscrew the tank, wipe the 510 pin and the base contacts with a dry cloth, check the coil is pressed in fully, then screw it back on.
• The screen reports a short circuit: something is shorting the coil or the connection. Remove the tank immediately. Look for debris on the contact pins or a coil head that is not seated, and fit a fresh coil if the fault persists.
• Weak battery or low-voltage warning: the cells need charging, or one is further depleted than the other. Charge both cells, and if the warning returns quickly, retire the pair and replace them together.
• Fire button does nothing: check that the mod is switched on and is not locked. Confirm the cells are seated with the correct polarity and that the contacts are clean.
• Flavour has flattened: this is nearly always the coil. Replace it, and consider a less sweet liquid to extend the next one.
• Vapour is thin and warm rather than dense: raise the wattage a few watts, but stay within the coil's range. Open the airflow a little, and make sure the liquid is a high-VG blend.

Stop and put it down if: a battery becomes very hot, swells, hisses, smells strange or leaks. Remove the device to a safe, non-flammable surface away from anything that can burn, do not charge or use that cell again, and dispose of it through a battery drop-off point rather than a household bin.

Still stuck? Keep your order details to hand and contact the shop. Faults that look like manufacturing defects are dealt with under the warranty and returns terms, and we will want to know the symptoms, the coil and batteries in use, and the error message shown, if any.

Value for money and how it compares with alternatives

The upfront cost of a kit is only half the picture. What matters over a few months is the running cost of liquid, coils and batteries, set against how much you enjoy using it. Here is a practical way to think about both.

Running costs. The ongoing items are e-liquid, coils and batteries. Sub-ohm vaping uses more liquid than pod vaping, so budget accordingly. Coils are the regular consumable, usually one every one to three weeks. Batteries are the occasional one: a good pair of 18650s can last a year or more with sensible use, and a decent external charger is a one-off purchase. Spread across a year, a reusable kit like this one normally costs less than buying a fresh disposable every few days, and it creates far less waste. Since sales of single-use vapes are now prohibited in the UK, that comparison matters more than it used to.

What you pay for. A good share of the price here goes on durability. The sealed, shock-resistant design makes the Aegis X a long-term piece of kit rather than something you replace when it takes a drop. If you tend to break or lose gear, that robustness is a real saving. If you are careful and rarely have accidents, you are paying for protection you may never use, and a plainer mod would cost less.

How it compares. Fairness matters here, so some honest comparisons:

• Vaporesso GEN 200 and similar kits: also a two-cell, 200W-class device with a mesh-coil tank. Vaporesso's menu system and chipset have a loyal following, and its coils are widely available. The Aegis X Zeus Kit's advantage is its focus on ruggedness, and the Vaporesso option is usually the one people compare it against when ruggedness is not the priority.
• SMOK Mag-style kits: these tend to offer large screens and feature-rich menus. They are strong on features, but typically less focused on water and dust resistance than the Aegis range.
• VOOPOO Drag series: well regarded for build, a clear interface and a fast chipset, with its own coil ecosystem. It is a close rival in everyday performance. Choose on which coils you prefer and which finishes appeal.
• Geekvape's own Aegis Legend 2: the more feature-rich sibling in the Aegis range, with additional functions. If you want more modes and are happy to pay more, look at it. If you want a rugged, simple everyday device, the Aegis X is the more straightforward option.
• Single-battery options such as the Aegis Solo range: lighter and easier to carry, at the cost of runtime and top-end power. A good fit for people who rarely go above 50W.
• Pod kits: cheaper to start and simpler to use, but a different style of vaping with less vapour and less flexibility. They are a sound option if the size and complexity of a mod put you off.

The verdict on value. The Geekvape Aegis X Zeus Kit offers good value when you will use its robustness, when you want sub-ohm flavour and vapour, and when you are happy to learn the routine. It offers less value if you want something compact, if you prefer salts, or if you are likely to leave a device in a drawer after the novelty fades. Think honestly about which of those buyers you are, and the choice usually becomes clear.