VooPoo Argus P1S Pod Vape Kit Creed Black

Overview

The VooPoo Argus P1S Pod Vape Kit Creed Black by Voopoo in Creed Black at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

What the VooPoo Argus P1S Pod Vape Kit actually is

The VooPoo Argus P1S Pod Vape Kit is a refillable, rechargeable pod system from Voopoo, the Shenzhen manufacturer behind the Drag mod series, the Vinci pod-mod range and the long-running Argus family. The P1S sits at the compact end of that Argus line. It is a slim, pocketable device that takes a replaceable pod with the coil already built in, runs from an internal battery charged over USB-C, and is designed for people who want to vape without handling cotton, wire or build decks.

This is a kit, not a disposable. You get the reusable device body and a pod, and you supply your own e-liquid. That distinction matters in the UK. Single-use vapes were banned from sale on 1 June 2025, so a refillable pod kit such as this one is now the mainstream route for anyone who liked the convenience of a small, no-fuss device. You also gain control: you choose the flavour, the nicotine strength and the brand of liquid, and you replace a pod rather than binning the entire device.

The product page groups nine variants of this kit. On hardware these usually differ by colour or finish, or by what is packed in the box, so check the variant selector before you add to basket and pick the one that matches what you want. The core device, the pod format and the way you use it stay the same across the family.

In this guide we cover what to expect from the P1S in everyday use. We look at performance, flavour, build quality, battery and charging, the pod and coil design, nicotine strength, who the kit suits and who should look elsewhere, setup, troubleshooting, value against comparable kits, and the UK rules that apply. Where we give figures such as capacity, battery size or pod life, treat them as typical for kits in this class and confirm the exact numbers against the specification table on the listing, because manufacturers revise components between batches.

If you are new to vaping, a pod kit like this is a sensible place to start because there is very little to learn. If you are already vaping on a bigger device, the P1S makes a good second kit for travel, work or days when you do not want to carry a larger mod.

Performance and vapour delivery

Compact pod kits of this class are tuned for mouth-to-lung (MTL) and restricted direct-to-lung (RDL) vaping. In plain terms, you draw the vapour into your mouth first and then inhale, or you take a slightly looser, gentler lungful. That is the draw style that suits nicotine salt liquids and standard 50/50 e-liquids, and it is the closest match to the feel of a cigarette. Output on devices of this size sits in the low-to-mid twenties of watts at most, which is enough to heat a small coil quickly without producing the huge clouds you would get from a sub-ohm mod.

What you should notice in use is a fairly quick warm-up. Press the button or take a draw and the coil is up to temperature within a fraction of a second, so the first puff of a session is not noticeably weaker than the tenth. The vapour is warm rather than hot when the pod is fresh and the liquid is wicking properly, and throat hit scales with your nicotine strength and the e-liquid's PG content rather than with the hardware alone.

Expect roughly 400 to 700 draws per 2ml fill. That is an estimate, not a rated figure, and it moves with how long you hold each draw, how sweet the liquid is, and the wattage you are running. Short, light draws stretch a pod further, while long, hard pulls burn through it quickly and put more stress on the coil.

Consistency across the life of a pod is the thing that separates a decent kit from a frustrating one. A well-built pod delivers steady flavour for most of its life, then fades gradually as the coil gunks up. If the P1S pod you are using starts to taste burnt or muted while it still has liquid in it, that is the coil telling you it is time to swap, not a fault with the battery or chip.

• Draw style: MTL to light RDL.
• Best liquid types: nicotine salts and 50/50 freebase.
• Typical draws per fill: around 400 to 700, depending on technique.
• Cloud size: modest, discreet, and easy on a train or in a shared flat.

If you are coming from a cigarette, the airflow on this style of device will feel familiar. If you are used to a sub-ohm tank with a wide-open airflow, you will find the P1S tighter and more restrained, which is exactly what it is built to be.

Flavour profile and choosing e-liquid for it

Because the P1S is a refillable kit, the flavour comes from whatever you put in the pod rather than from the device. What the hardware controls is how faithfully that flavour is reproduced. Small mesh-style coils warm the liquid evenly and quickly, which tends to give a cleaner, more defined taste than a basic cotton-and-wire coil of similar size. Sweet and fruit profiles come through with good detail, while menthol and mint profiles stay crisp rather than turning harsh.

Here are eight flavour directions that suit a compact pod kit well, and what to expect from each:

• Blue raspberry ice: a sharp, sweet fruit with a cold finish. Popular and forgiving, though very sweet liquids can darken the coil sooner.
• Strawberry kiwi: a juicy, slightly tart pairing that tastes clean on mesh and does not clog quickly.
• Watermelon ice: light and refreshing. Good for all-day vaping because it is rarely cloying.
• Menthol: a straight, cooling menthol is the classic switching flavour and works well at 10mg to 20mg nic salt strengths.
• Spearmint or peppermint: clean, cool and low on sugar, which is kind to the coil.
• Tobacco: a dry, earthy blend for ex-smokers who want a familiar profile with no sweetness.
• Vanilla custard: rich and dessert-like. These liquids often contain more sweeteners, so expect a slightly shorter coil life.
• Cola: fizzy and sweet, with a distinctive citrus-spice note that mesh reproduces surprisingly well.

On the liquid itself, look at the VG/PG ratio. Small pods wick best with 50/50 or 60/40 VG/PG blends. Very thick, high-VG liquids (70VG and above) can struggle to soak through the small wicking ports, which causes dry hits and burnt tastes. Most nicotine salt liquids are 50/50, which is a good match for this kit.

Sweeter liquids deposit more residue on the coil. That is not a defect, it is chemistry: sugars and sweeteners caramelise on a hot coil. If you vape heavily sweetened flavours all day, plan on changing the pod a little more often than someone vaping menthol or tobacco.

When you switch flavours, empty the pod, rinse it with cool water if the pod design allows, let it dry fully, and then refill. Mixing a new flavour into a pod that still holds old liquid muddles both tastes, and a fresh pod is the cleanest way to change profile.

Design and build quality

The Argus family has always leaned towards a practical, slightly rounded body that sits comfortably in the hand and slips into a jeans pocket or a small bag without a bulge. The P1S follows that approach. It is a slim, lightweight device with a pod that clicks into the top of the body, a small number of controls, and a finish that is designed to survive daily carrying rather than to be admired on a shelf.

Build quality on kits at this price point is generally solid, with a few things worth checking when yours arrives. Look at the pod seat to confirm it is clean and the contacts are free of debris. Check that the pod slides in and out with a firm, even click. Press the button a few times and confirm that it has a positive, not mushy, feel. These are all quick checks that catch the occasional defective unit before you start using it.

Material choices matter for day-to-day wear. Painted or coated bodies resist fingerprints but can chip at the edges if the device spends time in a pocket with keys or coins. Metal-accented finishes tend to hold up better against scratches. If your device lives in a bag or pocket alongside other items, a silicone sleeve or a small pouch is a cheap way to keep it looking tidy.

The pod is the piece you will handle most. Voopoo pods are made from a clear plastic so you can see the liquid level at a glance, and they use a silicone bung over the fill port. That bung seals the pod while in use and makes refilling quick. It does need to be pressed back in fully after every fill. A slightly proud or half-seated bung is the most common cause of leaks on any pod kit.

• Size: compact, with a footprint close to other small refillable pod kits.
• Weight: light enough to forget in a pocket, heavy enough to feel like a proper device.
• Controls: simple, with minimal menus or modes to learn.
• Charging port: USB-C, so you probably already own a cable that fits.

With the nine variants available, the main design decision is colour. Pick the one you like, because the hardware underneath is the same. If you tend to lose small devices, a brighter finish is easier to spot on a desk or in a bag.

Battery life and charging

Pod kits of this size normally carry a built-in lithium-ion cell in the region of 800 to 900mAh, which is the range that gives a full day of moderate use without making the device bulky. Confirm the exact capacity on the listing, as it is the figure that sets how often you need to plug in. The cell is sealed inside the body, so you charge the whole device through the USB-C port rather than swapping batteries.

In practice, a full charge should comfortably see a moderate vaper through a working day. Heavier users, particularly those drawing on a high-nicotine-strength liquid frequently through the day, may want to top up at lunch or leave the device on a charger at their desk. Battery life drops faster when you use the device at its maximum output or take long draws, so if you notice it running flat early, try shorter, lighter pulls.

Charging time for a cell this size is typically between 45 minutes and about an hour and a half, depending on the charger and cable. A standard 5V phone charger or a laptop USB port is perfectly adequate. There is no benefit to using a high-wattage fast charger, and a very cheap, unbranded charger is best avoided.

Some simple habits will keep the battery healthy for longer:

• Charge on a hard, flat, non-flammable surface and keep it away from bedding and soft furnishings.
• Do not leave the device charging unattended overnight if you can avoid it.
• Use the cable that came in the box, or a reputable replacement.
• Do not let the battery sit completely flat for weeks. Top it up every month or so if you are not using it.
• Keep the device out of hot cars and direct sunlight, since heat shortens lithium cell life.
• If the device becomes unusually hot, swells, or smells odd during charging, unplug it and stop using it.

An LED indicator typically shows charging status, usually with a colour change or a steady light to signal a full charge. If the light behaviour is not what you expect, check the quick-start card in the box. Different firmware revisions use slightly different blink patterns, and the manual that came with your unit is the authority for yours.

When a battery eventually loses capacity, which usually takes a year or more of regular use, the whole device needs recycling rather than a new battery fitted. We cover how to do that in the UK rules section below.

Pods, coils and the mesh-style heating tech

The heart of any pod system is the pod itself, which in the Argus line is a self-contained cartridge: a reservoir, a wicking system and a coil. You do not touch the coil. When it wears out, you replace the whole pod. That is more expensive per change than rebuilding a coil, but it removes any need for skill or tools.

Two heating designs are common in pods at this level. Round-wire coils wrap resistance wire around a cotton wick, and they are simple, cheap and reliable. Mesh coils use a flat or curved sheet of perforated metal that sits against the wick, giving a much larger heating surface. The advantages of mesh are quicker ramp-up, more even heating, and better flavour definition. The trade-off is that mesh is more sensitive to running dry. If the liquid level is low or the wick is not saturated, a mesh coil can scorch faster than a round wire would.

Voopoo has used mesh-style coils in a number of its recent pod ranges, and the resistance and exact coil type for the P1S pods is printed on the pod itself or its packaging. Lower resistance pods, around the 0.7 to 0.8 ohm mark, give a warmer, airier draw suited to RDL and freebase liquids. Higher resistance pods, around 1.0 ohm and above, tighten the draw and suit nicotine salts and MTL vaping. Check which resistance your pod is, and match the liquid to it.

A few rules extend the life of any pod:

• Prime it properly. After filling, wait 5 to 10 minutes before the first draw so the wick fully saturates. This is the single biggest factor in avoiding a burnt first puff.
• Never vape a pod that is nearly empty. Refill or replace when the liquid drops below the wicking ports.
• Avoid chain vaping. Give the coil a few seconds between draws so it can rewick.
• Match the liquid. Use 50/50 or 60/40 VG/PG blends rather than thick, high-VG liquids.

As a rule of thumb, a coil will give roughly one to two weeks of steady use, or somewhere around 8 to 15ml of liquid, before the flavour starts to flatten. That varies with your e-liquid, your habits and the pod resistance, so use taste as your guide rather than a calendar. When the taste turns dull, bitter or slightly burnt, fit a fresh pod.

Only use pods designed for the Argus P1S or confirmed as compatible on the listing. Fitting a pod from a different Voopoo family because it looks similar can lead to a poor electrical connection, leaks or an unrecognised-pod message.

Choosing the right nicotine strength

Picking the correct strength is one of the most important decisions you will make, and it matters more than the hardware. A strength that is too low leaves you unsatisfied and sends you back to cigarettes. One that is too high gives dizziness, nausea or a harsh throat hit. Nicotine is addictive, so choose with care and aim to use the lowest strength that comfortably keeps you off tobacco.

In the UK, e-liquid is capped at 20mg/ml of nicotine. That cap applies to all refillable e-liquids and used to apply to disposables too, which are now banned from sale. Bottles are limited to 10ml, and tanks and pods to 2ml, which is why pod kits like the P1S use a 2ml reservoir.

The two main liquid types affect how that number feels:

• Nicotine salts use a different form of nicotine that is smoother at higher strengths. They are the usual choice for compact pod kits. Common strengths are 10mg/ml and 20mg/ml.
• Freebase nicotine is the traditional form, which hits harder at the same strength. For this kind of device, freebase is normally chosen at 3mg/ml to 6mg/ml, occasionally 12mg/ml for heavier smokers.

A rough starting guide for the P1S looks like this:

• Heavy smokers (20 or more cigarettes a day): 20mg/ml nicotine salt, or 12mg/ml freebase if you prefer a harder throat hit.
• Moderate smokers (10 to 20 a day): 10mg/ml to 20mg/ml salt, or 6mg/ml to 12mg/ml freebase.
• Light or social smokers: 10mg/ml salt, or 3mg/ml to 6mg/ml freebase.
• Existing vapers cutting down: step down gradually. 5mg/ml to 10mg/ml salt is a common stepping stone.

Remember that a compact pod kit with a small battery and a tight draw delivers nicotine efficiently. People who used a high strength in a larger, cloud-producing device are sometimes surprised that they need less in a pod kit. If you feel light-headed, nauseous or get a very harsh throat hit, drop a strength. If you find yourself chain vaping and still craving, step up.

Never use nicotine if you do not already smoke or vape. If you want a nicotine-free option, 0mg liquids work in the same device and are widely available.

Who the P1S suits, and who should skip it

No single kit works for everyone, and it is better to know up front whether this one fits your habits. The P1S is built around simplicity and portability, which makes it a strong fit for some vapers and a poor one for others.

The P1S is likely to suit you if you are:

• A smoker looking to switch from cigarettes, who wants a draw that feels familiar and a device with almost nothing to configure.
• A new vaper who has used or tried a disposable and wants a refillable alternative that is just as easy to use.
• An existing vaper who wants a small backup or travel device alongside a bigger mod.
• Someone who values discretion, with modest clouds and a small body that does not draw attention.
• Someone who wants predictable running costs, using pods and liquid you choose rather than a sealed single-use unit.

You may want to look elsewhere if you:

• Prefer big, open, direct-to-lung clouds. A sub-ohm pod-mod or a tank system will serve you better.
• Like adjusting wattage, airflow and coil builds. A compact pod kit deliberately limits those options.
• Vape very heavily through the day. Small pods and a small battery mean frequent refilling and charging.
• Prefer high-VG, thick liquids. These can wick poorly in small pods designed for thinner blends.
• Want a rebuildable or long-lasting coil system with very low per-month running cost.

It is also important to be clear about who should not use a nicotine product at all. Vaping is not risk-free. It is intended for adults who already smoke or use nicotine. It is not for people under 18, for non-smokers, or for anyone who is pregnant or has a heart condition unless advised by a doctor. The sale of nicotine vaping products to under-18s is illegal in the UK, and we ask for age verification on delivery.

If you are trying to quit smoking altogether, your local stop smoking service, pharmacist or GP can offer free support and can talk through licensed nicotine replacement options alongside vaping. Many people find that combining a device like this with that support gives them a better chance of staying smoke-free than relying on a device alone.

How to set it up and use it, step by step

Setting up the P1S takes a few minutes. Do it in this order and you will avoid the two most common beginner problems, which are dry hits and leaks.

• Unbox and inspect. Check the device, the pod and the cable. Keep the quick-start card, because the click patterns and LED meanings for your batch are printed on it.
• Charge first. Plug the device into a USB power source and charge it until the indicator shows a full charge. A fresh battery gives the best first impression.
• Remove packaging from the pod. Peel off any protective film and remove any plugs or seals on the mouthpiece and base.
• Fill the pod. Open the fill port by pulling back the silicone bung, point the bottle nozzle at the side of the port rather than straight down the middle, and fill slowly to just below the maximum line. Do not overfill, and keep liquid away from the central air tube.
• Close the bung fully. Press the silicone back in so it sits flush with the pod surface.
• Let the coil soak. Wait 5 to 10 minutes. This lets the wick absorb the liquid so the first draw is smooth.
• Fit the pod. Slot it into the device until it clicks, in the correct orientation.
• Switch on and vape. Devices in this line commonly use a rapid multi-click on the button to switch on and off, and a draw or button press to fire. Follow the card in the box for your exact model.

Take your first few draws gently. Short, soft pulls prime the wick and spread the liquid across the coil. Hard, long drags on a freshly filled pod are the fastest way to cook the coil on the first day.

For day-to-day use, top up the pod before it empties and keep the device upright when you are not using it. If the pod has a clear window, check the liquid level at the start of the day. When you finish a session, a small tip is to keep the mouthpiece wiped dry, which stops condensation building up and dripping into your mouth.

To change a pod, switch the device off, pull the old pod out, and dispose of it carefully. Fit the new one and prime it as above. Some users also like to wipe the metal contacts on the device with a dry cotton bud now and then, which prevents residue from blocking the electrical connection.

Always keep e-liquid and pods out of reach of children and pets. Nicotine liquid is poisonous if swallowed, and all bottles and packaging should be stored securely.

Troubleshooting common problems

Almost every problem with a pod kit comes down to the same short list of causes. Work through the relevant item below before assuming the device is faulty.

The device will not fire or shows no response. Check that it is switched on using the click pattern on the quick-start card. Make sure the battery has charge, and try the pod in again, since a pod that is not fully seated is a very common cause. Wipe the metal contacts with a dry cotton bud.

The LED flashes and nothing happens. A flashing indicator is usually a warning about low battery, a poor pod connection or a short circuit detected on the coil. Reseat the pod, charge the device, and try another pod if you have one. If a new pod works, the old one has failed.

Dry or burnt taste. This nearly always means the wick is not saturated or the coil has worn out. Make sure the liquid level is above the wicking ports, wait a few minutes after filling, and take gentler draws. If the taste persists after priming, replace the pod. Switching to a thinner e-liquid can also help.

Gurgling or spitting. Too much liquid has reached the coil, or the mouthpiece is wet with condensation. Blow gently back through the mouthpiece, wipe it dry, and try again. Avoid overfilling the pod.

Leaking. Check that the silicone bung is seated flush, that you did not overfill, and that the pod is properly clicked in. Leaks can also follow a change in air pressure, such as a flight, so travel with the device empty or sealed and standing upright.

Weak vapour or weak flavour. This often means the battery is low or the coil is nearing the end of its life. Charge fully, then try a new pod. Very thick, high-VG liquids can also reduce output.

The battery does not hold a charge. Try a different cable and power source. If it still fails after a full day on charge, or if the device gets hot while charging, stop using it and contact us.

• Keep the contacts clean and dry.
• Do not use damaged pods or cables.
• Never open the device or try to repair the battery yourself.

If you have worked through these steps and the device still misbehaves, contact us with your order number and a short description or video of the fault. A unit that is faulty on arrival or fails within the warranty period is covered, and we will arrange a replacement or remedy.

Value for money and how it compares with similar kits

Value in a pod kit is not just the price on the label. It is the initial cost, plus the ongoing cost of pods and liquid, plus how long the device lasts before it needs replacing. Judged on that basis, the P1S is a reasonable proposition for people who want a simple refillable system.

Against a disposable, the numbers are favourable. A single-use vape used to cost around the price of a few packs of tea and then went in the bin. A refillable kit costs more upfront but works out cheaper within a few weeks, because 10ml bottles of e-liquid and replacement pods cost far less per millilitre than a sealed disposable did. You also avoid the waste of a throwaway device.

Against cigarettes, most people who switch fully find the monthly cost drops substantially, though the exact saving depends on how much you smoked and which liquids and pods you buy. Pods will be your main recurring expense, so factor in one fresh pod every week or two.

How does it stack up against comparable compact pod kits? A fair comparison looks like this:

• Vaporesso XROS series: the most direct rival in this size class, with a broad choice of pods and a well-established ecosystem. XROS devices are very easy to find pods for. The P1S competes on its Voopoo pod design, price and colour range rather than on a clear performance gap.
• Uwell Caliburn series: long-standing, simple, and strong on flavour. Caliburn kits tend to be slightly more basic, with fewer adjustments, which suits beginners.
• Oxva Xlim series: a popular choice with a good pod range and adjustable airflow on some models. Xlim is often a touch bulkier, and some versions offer more control than the P1S.
• Smok Novo series: another established name with wide pod availability, often at a similar price point. Choice between them often comes down to which pods you can get locally and which style you prefer.

The honest summary is that these kits all do the same job to a broadly similar standard. The P1S is not dramatically better or worse than the leading alternatives. Pick it if you like the Voopoo look, the pod format and the price, and if you can buy replacement pods easily. If you already own a different brand and are happy, there is little reason to switch just for the sake of it.

The thing to check before buying any pod kit is pod availability. A cheap kit with hard-to-find pods is poor value. We stock replacement pods for the Argus range so you can reorder alongside your liquid.

UK rules, safe use and recycling

Vaping in the UK is regulated, and a few rules directly affect how you buy, fill and dispose of a kit like the P1S. Knowing them helps you stay on the right side of the law and keeps you and your household safer.

• Age: you must be 18 or over to buy nicotine vaping products. Retailers, including us, verify age at the point of sale and on delivery.
• Nicotine strength: refillable e-liquids are limited to 20mg/ml. The same cap applied to disposables before they were banned.
• Container sizes: e-liquid bottles are limited to 10ml, and refillable pods and tanks to 2ml. This is why the P1S pod holds 2ml.
• Disposable ban: single-use vapes cannot be sold in the UK from 1 June 2025. Refillable and rechargeable kits remain legal.
• Packaging: products carry health warnings and ingredient information, and leaflets should be kept.

On safe use, keep your device and liquids out of the reach of children and pets, do not leave the device in extreme heat or direct sun, and do not carry loose lithium cells or damaged devices in a pocket with metal objects. Do not vape in places where it is prohibited, and be considerate of people around you. On flights, check with the airline, since rules on carrying vapes and spare batteries differ, and most require them to be in the cabin rather than in checked luggage.

Recycling is important. A vape device contains a lithium battery and electronic parts, and it should never go in your household bin or kerbside recycling. Lithium batteries can cause fires in bin lorries and recycling plants. Instead:

• Take the device to a retailer that offers take-back, since shops that sell vapes are required to accept waste electrical equipment.
• Use a household waste recycling centre that accepts small electricals, or a dedicated WEEE drop-off point, including those found in many supermarkets and DIY stores.
• Empty used pods of any remaining liquid first, then dispose of them as your local council advises, or return them to a take-back scheme where one is offered.
• Keep bottles of e-liquid and nicotine waste away from drains and general waste, and check local guidance for disposal.

A little care here makes a real difference to waste and fire risk. Buying a refillable kit already cuts waste compared with a disposable, and recycling it properly at the end of its life completes the job.