Geek Vape Supermesh Coil (Pack of 5)

Overview

The Geek Vape Supermesh Coil (Pack of 5) by Geek Vape in 0.3Ohm at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Geek Vape Supermesh Coil (Pack of 5): Overview

The Geek Vape Supermesh Coil (Pack of 5) is a multipack of five replacement mesh coils for refillable tanks and pod systems that use Geek Vape's Supermesh coil format. If you already vape on a Geek Vape device, you know the routine: the coil is the part that wears out first, long before the battery or the tank body, and a fresh one is the single most reliable way to bring a tired device back to the way it tasted when it was new. Buying five at once means you are covered for a good stretch of regular use, and you are not stuck with a flat, burnt-tasting tank on a Sunday evening when the shops are shut.

This listing is for the coils only. There is no e-liquid in the pack, no tank, no battery and no charger. You are buying five consumable heads, each one a small cylinder of metal mesh wrapped around an organic cotton wick, housed in a sealed metal shell with a threaded or push-fit base depending on the device. The pack is listed in two variants in our catalogue, which normally correspond to different resistance ratings. Check the resistance printed on the coil you are replacing and match it, or pick the other option deliberately if you want to change how the device behaves.

Because coil formats differ between Geek Vape products, the most important buying step happens before you add to basket: confirm that your tank or pod kit accepts this coil. Geek Vape has several coil families, and they are not interchangeable even when the coils look similar. The safest check is to look at the code stamped on the side of your existing coil, or the compatibility line in your device's manual, and compare it to the product title and variant on this page.

In the sections below we go through what a mesh coil does differently from a round-wire coil, how it performs in daily use, what you should expect from flavour and vapour, how to choose the right resistance and nicotine strength, how to fit and prime a coil properly, how to fix the usual problems, and whether a five-pack is good value compared with the alternatives. We have kept the claims grounded: where we cannot state an exact figure without knowing your specific device, we say so rather than guess.

A quick note on UK rules before we go further. Vaping products in the UK are for adults aged 18 and over, nicotine e-liquid is capped at 20mg/ml, and refillable tanks are limited to 2ml capacity under current regulations. Single-use disposable vapes have also been banned for sale since June 2025, which is part of the reason refillable, coil-based systems like this one are now the mainstream route for adult smokers who want to switch.

What Mesh Coil Technology Actually Means

A traditional coil is a length of round resistance wire (kanthal, stainless steel or nichrome) wound into a spiral around a cotton wick. Electricity flows through the wire, the wire heats up, and the cotton feeds liquid onto the hot surface where it turns into vapour. It is a simple, proven design, but the heating surface is limited to the narrow strip of wire that touches the cotton.

A mesh coil replaces that spiral with a thin, perforated sheet of resistance material, usually stainless steel, rolled into a cylinder or folded into a curved panel. The cotton sits against the inside or outside of the sheet, and the whole surface is covered in tiny holes. Here is why that matters in practical terms:

• Larger contact area. The mesh touches far more of the wick than a few turns of wire do, so more e-liquid is exposed to heat at any given moment.
• More even heating. A flat sheet spreads heat across a wider area, which reduces the hot spots that cause a harsh or scorched hit on a wire coil.
• Quicker ramp-up. Mesh is thin, so it reaches working temperature fast. In use, that feels like the coil responds almost as soon as you press the button or draw.
• Lower resistance in a small package. Mesh coils are commonly built at low resistance, which suits the higher-wattage, direct-to-lung style of vaping that sub-ohm tanks are designed for.

Geek Vape uses the name Supermesh for its mesh coil line. We would not read too much into the marketing label, because mesh construction varies from brand to brand. What you can rely on is the general behaviour of the mesh approach: fast heat-up, an even surface and generous vapour for the power you feed it.

There are trade-offs, and it is better to know them now. Mesh coils tend to drink e-liquid faster than a small round-wire coil, so a mesh tank empties sooner. They can also be less forgiving of thick, sugary liquids, because the fine holes in the sheet are what let the cotton wick liquid in, and heavy residue can clog them over time. And because they are optimised for a particular power window, running them well below or above the wattage printed on the coil will shorten their life or dull the flavour.

The takeaway: a mesh coil is a tool for people who want a fuller, warmer, more consistent hit from a sub-ohm style setup, and who are willing to change the coil on a regular schedule to keep it that way.

Performance and Vapour Delivery

A coil does not have a puff count the way a disposable does, so performance is better judged in terms of how long the coil stays at full quality and how much vapour it makes while it does. In ordinary daily use, a mesh coil from a pack like this one typically lasts somewhere between one and three weeks. That is a range rather than a promise, because several variables change it dramatically.

The factors that decide how long a coil lasts are:

• Your e-liquid. Sweet, dessert-style and heavily flavoured liquids leave more residue on the mesh than lighter fruit or menthol blends. Higher VG blends are thicker and can also leave a film.
• Your power setting. Running a coil at the top of its rated wattage range gives more vapour and a warmer hit, but it ages the coil faster. Staying in the middle of the range is usually the sweet spot between vapour and lifespan.
• How you vape. Long, slow draws are kinder to a coil than rapid chain vaping, because the wick has time to re-saturate between puffs.
• Priming and fill level. A badly primed coil or a tank run close to empty will dry-burn, and a dry-burned mesh coil is finished.

On vapour production, mesh generally outperforms a comparable round-wire coil at the same wattage. Because more liquid reaches the hot surface per second, you get a denser cloud and a warmer inhale without needing to push the power up. For vapers moving from cigarettes who want something that feels substantial in the throat, that can make the switch easier. For vapers who prefer a tight, cool, mouth-to-lung draw, the output can feel excessive unless the device's airflow can be tightened.

Consistency is where mesh earns its place. A good mesh coil keeps delivering a steady hit through most of its life, then fades over a few days rather than falling off a cliff. The usual warning signs are a slight dulling of flavour, a faint toasted note on the exhale, and a bubbling or gurgling sound on the draw. When you notice two of those, change the coil. Waiting for a full burnt taste means you have been inhaling degraded cotton for a day or two.

We would rather give you an honest range than a headline figure. If you chain vape thick dessert liquids at maximum wattage, expect the low end of the lifespan range. If you vape lighter liquids at moderate power with sensible gaps between sessions, you can expect the higher end, and a five-pack will last you a long time.

Flavour Profile and Taste Clarity

Flavour is the main reason people upgrade from a worn coil to a new one, and it is the main reason mesh coils became popular in the first place. A coil does not add flavour of its own, but it decides how faithfully the flavour in the bottle is carried to your mouth.

Here is what a fresh Supermesh coil typically does for taste:

• Rounder, fuller flavour. The even heating across the mesh vaporises the liquid more completely, so the layers of a complex flavour (the fruit and the cooling note, or the cream and the biscuit) come through together rather than one dominating.
• Warmer vapour. Mesh runs a little warmer than a small round-wire coil at the same wattage, which suits dessert, tobacco, custard and bakery profiles, where warmth helps the flavour open up.
• Less harshness at the start. Fewer hot spots means a fresh coil is less likely to give a sharp, scratchy hit on the first few puffs, provided it has been primed properly.

There are caveats worth being straight about. Very delicate flavours, such as light floral, subtle pear or very mild menthol, can be overwhelmed on a high-output mesh coil if you run it hot. If that is your style, drop the wattage towards the lower end of the range printed on the coil, open the airflow a touch, and give the liquid time to cool as it travels. Menthol and ice blends tend to do well on mesh because the extra vapour carries more of the cooling agent.

Flavour will change across the life of a coil. In the first day or two a new coil can taste slightly muted while the cotton fully beds in, then it settles into its peak, and finally it fades as residue builds. That is normal. A single day of settling in is not a fault.

Switching e-liquid between flavours on the same coil is possible, but flavours do carry over, and strong ones carry over more. If you change from a heavy dessert liquid to a delicate fruit one, expect a trace of the old flavour for a few tanks. If you vape several very different flavours, a spare coil per flavour family is a sensible habit, and it is one of the practical reasons a five-pack suits people who rotate liquids.

Finally, no coil can rescue a stale or poor-quality liquid. If a new coil still tastes flat, check the liquid's age, how it has been stored and whether the tank has been left in a hot car or a sunny windowsill.

Design and Build Quality

A coil head looks like a minor part, but its construction decides whether it leaks, gurgles or lasts. The Geek Vape Supermesh coil follows the standard modern layout, and it helps to understand each element so you can judge a coil by eye when you open the pack.

A typical mesh coil head is made up of:

• A metal outer shell with small intake holes (often called wicking ports or slots) that let e-liquid flow from the tank to the cotton. The size and position of these ports affect how thick a liquid the coil handles comfortably.
• An organic cotton wick pressed against the mesh sheet on the inside of the shell. This is the part that carries liquid to the heating surface.
• The mesh itself, a thin stainless-steel or similar resistance material, which is the heating element.
• A base with a contact pin and sealing rings. The pin makes the electrical connection to the device, and the silicone or rubber seal stops liquid leaking around the thread.
• A resistance and wattage marking stamped on the side, which tells you the coil's ohm rating and the power range it is designed for.

When you take a coil out of the pack, do a quick visual check. The shell should be clean and undented. The base seal should be seated and not twisted. The mesh should be visible through the central chimney as an even cylinder without obvious gaps or crumpled sections. The cotton should be white and tidy rather than grey or visibly frayed. If anything looks wrong, do not fit that coil; contact us with a photo and we will sort it out.

Consistency across a five-pack matters more than the quality of any single coil. Mass-produced coils always vary a little, and one dud in a pack is not unheard of with any brand. The practical approach is to prime and fit each one carefully, and if one performs badly in the first hour (leaks, spits, gives a burnt taste from fresh) report it rather than assuming that is how the pack behaves.

The coils are small and lightweight, and the pack keeps them separate, which is useful for carrying a couple in a pocket or bag. Store the unused ones upright, away from heat and direct sunlight, and keep them in their packaging until you need them, so the cotton does not pick up dust or lint.

One more build point: coils are not designed to be cleaned and reused. Rinsing a spent coil rarely restores it, because the damage is to the cotton and the mesh surface, not just residue. Treat each one as a consumable.

Power, Battery and Charging Considerations

The coil does not have a battery, but it is half of the electrical system, so the coil and the device battery work together. Understanding that relationship will help you get more from both.

Every mesh coil has a stated resistance in ohms and a recommended wattage range. The lower the resistance, the more current the battery has to supply for the same power, and the faster the battery drains. A low-resistance mesh coil running near the top of its range will empty a typical built-in or 18650 battery noticeably faster than a higher-resistance coil run gently. If you are used to a long battery life on a mouth-to-lung pod kit, expect a shorter run time when you move to a sub-ohm mesh coil, and plan to charge more often.

Some practical points on charging and battery safety:

• Use the cable and charger supplied with the device, or a reputable USB charger with a suitable rating. Avoid cheap unbranded chargers, which can deliver unstable power.
• Do not charge a vape unattended overnight or leave it charging on soft furnishings such as a bed or sofa.
• Do not use damaged batteries. If a removable cell has a torn wrap, dents or any sign of swelling, stop using it.
• Carry removable batteries in a case, never loose in a pocket with keys or coins.
• Keep the contact pin clean. A dirty or sticky connection between coil and device can cause misfires and the dreaded 'check atomizer' message. Wipe it gently with a dry cotton bud.

The device usually reads the coil's resistance when you fit it. If the reading on screen is different from the number stamped on the coil, the usual cause is a loose connection or condensation on the pin. Re-seat the coil, dry the contact, and check again. A reading that is wildly off even after cleaning suggests a faulty coil or a tank-thread problem.

When it comes to disposal, the coil itself is a small mix of metal and cotton and is not a battery. Check your local council guidance, since rules vary, but the key point is not to put vape batteries or devices in household bins. Take spent devices and removable batteries to a battery or small electricals recycling drop-off point, which many supermarkets, council recycling centres and some vape shops provide. Spent coils can usually be collected with your other vaping waste at those points where the operator accepts them.

Choosing Resistance and Nicotine Strength

Two choices shape your experience with a mesh coil more than any other: the resistance of the coil you buy, and the nicotine strength of the liquid you put in front of it. They are related, because the amount of vapour you inhale determines how much nicotine you take in per puff.

Resistance. The two variants of this pack are normally distinguished by their ohm rating. As a general guide, a lower-resistance mesh coil takes more power, makes more vapour and a warmer hit, and uses more liquid and battery. A higher-resistance coil is more economical, produces cooler, tighter vapour and suits a firmer draw. If you are replacing an existing coil, buy the same resistance as the one you are used to, since that is what your device settings and your habits are tuned for. If you want to change your vaping style, change the resistance deliberately and adjust the wattage to match the range on the coil.

Nicotine strength. UK law caps nicotine e-liquid at 20mg/ml, and the strength you choose should reflect both your smoking history and the type of coil you use. A rough guide:

• Low-resistance, high-vapour mesh coils deliver a lot of liquid per puff. These setups are usually paired with low-strength liquid, commonly 3mg/ml to 6mg/ml, often in a higher VG blend.
• Higher-resistance mesh coils in a tighter, mouth-to-lung style can work with medium strengths, often 6mg/ml to 12mg/ml.
• Nicotine salts (typically 10mg/ml to 20mg/ml) are designed for low-power pod devices and lower-wattage setups. They are generally not suited to high-wattage sub-ohm mesh coils, because the nicotine load per puff becomes very high and harsh.

If you are coming from a pod kit on 20mg salts, do not carry that strength across to a high-power mesh coil. Drop right down and build up if you need to. Starting too strong gives symptoms such as dizziness, nausea, a racing pulse or a sore throat. If you experience those, stop, drink some water, and move to a lower strength.

Choose a liquid that suits the coil too. Mesh handles 50/50 and 70/30 VG blends well; very thick, max-VG liquids can struggle to wick through the finer ports on some mesh designs, which causes dry hits. If the coil gurgles or tastes burnt on a thick liquid, a slightly thinner blend usually fixes it.

Nicotine is addictive. If you do not currently smoke or vape, these coils and the liquids that go with them are not for you. If you want help to stop smoking entirely, your pharmacy or the NHS stop smoking service can offer support alongside vaping.

Who These Coils Suit (and Who Should Skip Them)

A product page should tell you when not to buy as clearly as when to buy. Here is our honest take on who gets value from the Geek Vape Supermesh Coil (Pack of 5).

These coils suit:

• Existing owners of a compatible Geek Vape device who need replacement heads and want to stay with the format they know.
• Adult smokers who have switched to vaping and want a warm, dense, satisfying hit rather than a very light, cool draw.
• Vapers who rotate flavours and like to keep a fresh coil for each liquid family without ordering every few days.
• Anyone who dislikes running out. A multipack means a spare is always in the drawer.
• Everyday users who want predictable running costs rather than the surprise of a dead coil midweek.

You should probably skip them if:

• Your device uses a different coil format. This is the most common reason for returns. Check compatibility first; the coils will not work properly in a tank built for a different series.
• You are new to vaping and have never owned a compatible device. A coil on its own does nothing. You need a tank or pod kit that accepts it, plus liquid and a charger.
• You prefer a very tight, cool, light mouth-to-lung draw. A high-output mesh coil may feel like too much unless your device lets you restrict airflow and lower the power.
• You use very thick, max-VG liquids or very sugary dessert blends constantly. You will get shorter coil life and may prefer a coil designed for thick liquids.
• You do not currently use nicotine products. Vaping is intended as an alternative for adult smokers, not as a new habit for non-smokers or anyone under 18.

If you are unsure which category you fall into, send us the name of your device and a photo of your current coil stamp, and we will tell you whether this pack fits before you buy. It takes a minute and avoids a return.

For people who vape lightly, perhaps a few sessions across the day, a five-pack will last a long time. For heavy users, the pack gives a few months of cover. In both cases, the economy comes from buying in bulk rather than from any claim about extending coil life.

How to Install, Prime and Use the Coils

Fitting a coil takes two minutes, but the priming step decides whether it lasts. Many coils die in the first ten minutes because they were fired dry. Follow this routine every time.

Step by step:

• 1. Power the device off and empty the tank. If you are removing an old coil, pour the remaining liquid back or discard it, then unscrew the old coil from the base or pull it out of the pod, depending on the format.
• 2. Check the new coil. Look for the resistance stamp, intact seals and a clean pin. Leave the plastic or paper wrapper on until you are ready, so the cotton stays clean.
• 3. Prime the cotton directly. Drip a few drops of e-liquid into the central chimney and onto the outside wicking ports of the coil until the cotton looks fully dark and wet. Do not flood it, but do not skimp.
• 4. Fit the coil firmly. Screw or press it in until it is snug, without forcing it. Over-tightening can crush the seal.
• 5. Fill the tank. Fill slowly, avoiding the central chimney, and stop below the maximum line. Keep within the tank's rated capacity; UK tanks are limited to 2ml in many models.
• 6. Wait. Let the filled tank stand for five to ten minutes, upright. The cotton needs time to soak up liquid through the ports. This is the step people skip, and it is the most important.
• 7. Take a few priming draws. Without pressing the fire button, draw on the mouthpiece a few times to pull liquid through. Then set the wattage at the low end of the coil's range.
• 8. Start gently. Take short puffs at low power for the first couple of minutes, then move up into the middle of the range.

Day-to-day habits that extend coil life:

• Never let the tank run below a quarter full.
• Stay in the middle of the wattage range unless you have a reason to go higher.
• Pause between puffs; chain vaping starves the wick.
• Keep the tank upright when not in use to avoid flooding the airflow.
• Change the coil as soon as the flavour fades, rather than increasing the power to compensate. Turning the power up on a worn coil only burns it faster.

Store the device upright, away from heat, and avoid leaving it in direct sun or on a car dashboard. Heat thins the liquid and can cause leaking at the coil base.

Troubleshooting Common Coil Problems

Most problems with mesh coils have simple causes. Work through the likely ones before assuming a coil is faulty.

Burnt or toasted taste from a new coil. The cause is almost always priming. Either the cotton was not saturated before the first fire, or the tank was not left to stand. Remove the coil, re-prime it by dripping liquid on the cotton, refit it and wait ten minutes. If the burnt taste stays, the coil has likely been damaged and should be replaced.

Gurgling or bubbling. Usually caused by condensation in the airflow channel. Remove the tank, blow gently through the mouthpiece to clear it and wipe the base. Make sure the airflow ring is open enough for the power you are using.

Leaking from the base. Check that the coil is screwed in firmly and that the seals are seated and not twisted. Do not overfill, particularly if the liquid is thin. Changes in air pressure (flights, hot rooms) can also push liquid out; keep the tank under half full when travelling.

Spitting or hissing. This tends to be liquid flooding the coil, from overfilling, over-priming or too low a power setting for the liquid. Raise the wattage slightly, tilt the tank to drain excess, and let the coil settle.

Weak flavour or thin vapour. The likely cause is a coil approaching the end of its life, or a power setting that is too low. First try raising the wattage by a few watts within the stamped range. If that does not help, the coil is spent. Also check the liquid, since old or badly stored e-liquid loses flavour.

'Check atomizer', 'no atomizer' or a wrong resistance reading. Unscrew and re-seat the coil, wipe the contact pin and the device's connector with a dry cotton bud, and make sure the coil is the right format for your device. If the reading is still wrong, try a second coil from the pack. If both fail, the issue may be the tank thread or the device connector, not the coil.

Dry hits. A dry hit is a harsh, hot, acrid draw. Stop immediately. Dry hits mean the wick is not receiving liquid fast enough: the tank is too low, the liquid is too thick, the airflow is too tight, or the coil is clogged. Fix the cause, and replace the coil if the burnt taste lingers.

If a coil fails in the first hour of correct use, contact us with a photo of the coil, the device name and what you saw. Faults reported promptly are easier to resolve.

Value for Money: The Cost of a Five-Pack

Coils are a running cost, and the real price of vaping is a combination of the device, the liquid and the coils you burn through. To judge value, think in terms of cost per week rather than the pack price alone.

Take a typical case. If one coil lasts about two weeks of regular use, five coils give you around ten weeks, or roughly two and a half months. Divide the pack price shown at the top of this page by ten and you have your approximate weekly coil cost. For most adult vapers that sits well below the cost of smoking, and it is a small share of what they spend on liquid.

Where does a five-pack save you money or hassle?

• Per-coil price. Multipacks are almost always cheaper per coil than single heads or two-packs.
• Delivery. Ordering once instead of every few weeks cuts repeat delivery charges and the risk of running out.
• Avoiding emergency purchases. Buying a single coil at a corner shop at short notice is usually the most expensive way to do it.
• Flavour rotation. If you swap liquids often, a spare coil per flavour family prevents ghosting between flavours.

Where does it not make sense? If you only vape occasionally, five coils could sit unused for months. Cotton can absorb moisture and odours over a long time in a warm room, so very slow use may not deliver the full value. In that case a smaller pack might be more sensible, though the per-coil price will be higher.

Honest comparison with other coil types helps too. A cheap, generic, third-party mesh coil may be cheaper per unit but varies more in resistance accuracy, wicking and quality control. A premium rebuildable coil, built by hand, is cheaper over the long term in materials but takes skill, time and tools, and is not something a casual vaper needs. A branded manufacturer coil like this one sits in the middle: consistent, easy to fit, designed for the device and with no building required.

The best way to protect value is behaviour, not price. Prime properly, stay within the wattage range, keep the tank filled and change the coil on time. Doing those four things routinely can add days to each coil, which adds up to weeks across a pack.

How Supermesh Compares With Other Coil Options

Comparisons are only useful if they are fair. Here is how a Geek Vape mesh coil sits against the main alternatives you may be considering.

Versus standard round-wire coils. Round-wire coils are simple, widely available and can be very economical, especially at higher resistance. They heat more slowly and have a smaller heating surface, so flavour is often a little narrower and vapour a little less dense at the same power. Mesh typically gives a fuller, warmer hit and faster response, at the cost of higher liquid consumption and a stronger need to follow the wattage range.

Versus ceramic coils. Ceramic wicks resist burning and are popular in pod systems for their clean taste and long life, particularly at lower power. They often respond more slowly and give a cooler, more muted vapour than mesh. If you vape low-power nicotine salts, ceramic can be a fair alternative; if you want volume and warmth, mesh is the closer fit.

Versus third-party compatible mesh coils. Aftermarket coils can cost less, and some are good. Quality is less predictable, though, and a coil that is slightly off in dimensions can leak or misread. Geek Vape's own coils are designed to match the device's tolerances, which is what you are paying for.

Versus rebuildable atomisers (RDA, RTA). Hand-built coils give complete control over resistance, wire type and wick, and can outperform any pre-made head. They also demand skill, a coil jig, wire, cotton and a safe understanding of battery limits and Ohm's law. For most adult smokers who just want to switch and stay switched, a pre-made coil is the more sensible choice.

Versus other Geek Vape coil series. The brand makes several coil families for different devices, and some are designed for mouth-to-lung pod use while others target direct-to-lung sub-ohm tanks. They are not cross-compatible. If your device is listed as using a different series, this pack is not the right one.

Where does the Supermesh coil fall short? It is not the cheapest option, it is not the longest-lasting under hard use, and it is not suited to every liquid or every vaping style. What it offers is consistency, simple fitting and a solid, even flavour for people who want a straightforward, dependable replacement.

If you want to compare in person, our team can talk through your current setup and recommend the coil type that matches how you vape, rather than just the one we want to sell.