VooPoo Vinci Pod Vape Kit Royal Edition Gold Jazz

Overview

The VooPoo Vinci Pod Vape Kit Royal Edition Gold Jazz by Voopoo in Gold Jazz at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Overview: what the VooPoo Vinci Pod Vape Kit Royal Edition is

The VooPoo Vinci Pod Vape Kit Royal Edition is a compact, rechargeable, refillable pod system from Voopoo, the Shenzhen-based manufacturer known for the Drag mod series and the PnP coil platform. It belongs to the small-pod category: pocket-sized, simple to operate, and aimed at people who want more flexibility than a throwaway device without taking on the upkeep of a full tank-and-mod setup. The Royal Edition is a finish and colourway variant of the Vinci Pod platform, so the electronics and pod system underneath are the same as the standard Vinci Pod, with a more dressed-up exterior.

The idea behind a kit like this is straightforward. You buy the device once, fill the pod with the e-liquid you prefer, and swap the coil inside the pod when the flavour starts to flatten. That means the running cost is a bottle of liquid and an occasional coil, rather than the full price of a new device every few days. Since single-use disposable vapes were banned from sale in the UK in June 2025, refillable pod kits have become the obvious route for anyone who liked the simplicity of a disposable but wants a legal, cheaper and less wasteful alternative.

This guide walks through what the kit offers in practice: its performance, how long a pod lasts, how the PnP coil system works, what nicotine strengths make sense, how to fill and activate it, what to check when something stops working, and how it compares with rival pod kits sold in the UK. We have tried to be straightforward about strengths and limits, because a pod kit that suits a heavy cigarette smoker moving to vaping is not necessarily the right device for someone who wants a big cloud of vapour.

One note on specifications before we start. Manufacturers revise pods, firmware and packaging between batches, and UK-market kits are configured to local rules. Where this page gives figures, they are the typical values for the Vinci Pod platform. The specification table on the product listing is the final word for the exact unit you are buying.

Key specifications at a glance

Here is a quick summary of what you are getting with this kit. These are the typical figures for the Vinci Pod platform as sold in the UK.

• Device type: refillable pod system, rechargeable, with a replaceable coil inside the pod
• Battery: built-in lithium-ion battery in the region of 800mAh, charged over USB-C
• Pod capacity: 2ml in UK-market kits, which is the legal ceiling for refillable tanks and pods sold here (the same hardware is sold with a larger pod in some other countries)
• Coil platform: Voopoo PnP coils, a plug-and-play system with a range of mesh and regular resistance options
• Output: adjustable wattage with a ceiling around 30W, so it covers both tight mouth-to-lung draws and slightly airier restricted draws
• Activation: draw activation plus a manual fire button, so you can use it without pressing anything or fire it deliberately when you want to
• Protection: typical short-circuit, low-resistance, over-time and low-battery protections
• E-liquid compatibility: nicotine salt and freebase liquids, 50/50 and 70/30 VG/PG ratios, within the UK 20mg/ml nicotine limit
• Intended user: adults who smoke or vape, 18+ only

Several points about this list deserve emphasis. First, the 2ml pod size is not a flaw of the device, it is a legal requirement. The Tobacco and Related Products rules in the UK limit refillable tank and pod capacity to 2ml, e-liquid bottles to 10ml, and nicotine strength to 20mg/ml. A kit sold here has to respect all three. Second, a built-in battery in the 800mAh range is sized for a small pod. It is not trying to match the multi-day endurance of a 1500mAh mod, and it should not be judged against one.

Third, the PnP coil platform is the most important line on the list for long-term ownership. Because the coils are widely stocked and sold separately, you are not tied to a single proprietary part that might disappear. That makes the kit easier to live with than many lower-cost devices that use sealed, non-replaceable pods.

Performance and vapour delivery

The Vinci Pod is tuned for a throat hit and vapour volume that sit between a nicotine-salt pod device and a small lung-hit tank. At lower wattages with a higher-resistance mesh coil, the draw is snug and cool, the vapour is modest and the flavour is concentrated. That setup suits nicotine salts at 10mg to 20mg and is the one most people moving from cigarettes or disposables will settle into. Turn the wattage up and pair it with a lower-resistance mesh coil and you get warmer, denser vapour, a looser feel to the draw and a faster rate of liquid use.

Draw activation means there is no need to hold a button down. You inhale and the device fires, which is closer to how a cigarette or a disposable behaves. The fire button gives you a manual option, which is handy when you are priming a fresh coil or when a draw-activated sensor seems slow in cold weather. Response is quick enough that you will not notice a lag in normal use.

The real-world performance depends on three variables: the coil, the wattage and the liquid. A thicker, higher-VG liquid is slower to wick through a small mesh coil, so running it at the top of the wattage range with a high-resistance coil can lead to dry-feeling hits. A thinner 50/50 mix or a nicotine salt will wick more readily and behave better at the low and middle settings. If you find a particular setup tastes harsh or burnt, the fix is almost always to drop the wattage or switch to a thinner liquid, not to assume the device is faulty.

How many puffs does a pod give you? This is the question most buyers ask, and the honest answer is that it varies. A 2ml pod filled with a nicotine salt and used at moderate settings typically delivers somewhere between 400 and 800 puffs before it needs refilling, depending on how long you draw for and how high you run the wattage. A heavier user running a low-resistance coil at higher power will be at the lower end of that range, and a light user taking short draws at low power can reach the upper end. For comparison, a 2ml pod holds the same volume of liquid as the tank in most of the pod kits that replaced disposables, so the endurance per fill is comparable.

Refilling is the trade-off for flexibility. If you are used to a 600-puff disposable you throw away, you will be topping up a pod more often, but a 10ml bottle of liquid refills it around five times and costs a fraction of what five disposables used to.

Flavour: what to expect and which e-liquids suit the kit

A pod kit does not come with a fixed flavour the way a disposable does, so the flavour experience depends on the e-liquid you choose. The Vinci Pod's mesh coils are good at pulling out detail, which means fruit, ice and dessert profiles come across clearly rather than muddy. In this product family you will see seven variants listed. On a kit these usually differ by colour and finish rather than by flavour, so check the selector on the product page to see which colourways are in stock.

To give you a practical sense of what works well in a small mesh pod, here are the broad flavour families and how they behave:

• Fruit and berry: strawberry, blueberry, raspberry and mixed berry liquids are clear and bright through a mesh coil. They suit the low-to-mid wattage range.
• Ice and menthol: blue raspberry ice, watermelon ice and mint profiles carry a clean cooling effect. Menthol can feel sharper at higher wattage, so go gently.
• Tropical: mango, pineapple, passion fruit and lychee blends tend to be sweet and rounded, and they handle a little extra power well.
• Tobacco: a good option for people leaving cigarettes who want a familiar taste. Lighter tobacco blends work best, since heavily sweetened ones can gunk a coil faster.
• Dessert and bakery: custard, vanilla and biscuit liquids are rich, and they are also the hardest on coils because of the sweeteners. Expect to replace the coil sooner.
• Cola and soft-drink styles: these are lively and tangy through mesh, and they stay clear for longer than creamy liquids do.

A few habits improve flavour regardless of which liquid you choose. Let a freshly filled pod rest for a few minutes before the first draw so the coil can soak up the liquid. Keep the wattage in the lower half of the range for nicotine salts. Do not mix flavours in the same pod without cleaning it out, because residues carry over and blur the taste. If you do change flavour, rinse the pod with lukewarm water, dry it fully, and refill.

Finally, keep one thing in mind about sweeteners. Sucralose and other sweeteners in the liquid caramelise on the coil, and that is the main reason a coil's flavour fades. This is not a Voopoo issue. It applies to every mesh coil on the market, and choosing less heavily sweetened liquids will stretch the life of each coil.

Design and build quality

The Vinci Pod is a slim, rounded body that is sized to disappear into a jeans pocket or a small bag. The Royal Edition's selling point is its exterior: a more considered finish and colour treatment than the standard model, intended to look like something you chose rather than something you picked up at a till. The body feels solid in the hand for a device in this price bracket, and the weight is low enough that you forget it is there.

The pod clicks into the body and is held securely, with a connection to the coil that does not rely on loose parts. This matters more than it sounds. Poorly seated pods are one of the most common reasons small devices leak or misfire, and a secure seat reduces both problems. The fill port is sealed with a silicone plug, which should be pressed fully home after every refill. If it is not, liquid can seep out of the pod and into the battery housing.

Build quality in the Voopoo range is generally consistent, and the buttons and USB-C port on this kit are the sort of parts you can expect to hold up under ordinary daily use. A few sensible habits help the device last. Keep it upright when you can, avoid leaving it in a hot car, and wipe the pod contacts occasionally with a dry cotton bud so residue does not interfere with firing. Do not drop it onto hard flooring, as the glossy finishes on special editions can chip or scuff more visibly than matte ones.

As for ergonomics, the mouthpiece is shaped for a comfortable lip fit and a mouth-to-lung draw, and the airflow design keeps the draw smooth rather than whistly. If you have large hands, the body may feel on the short side, but most users find the small footprint an advantage, not a limitation. Finally, the Royal Edition costs a little more than the base model in many shops. That premium buys you the finish, not a performance upgrade, so decide whether the look matters to you before you pay extra for it.

Battery life and charging

The built-in battery on the Vinci Pod is in the 800mAh class. For a pod this size, that is a sensible match. It is enough to see an average vaper through a day of moderate use at typical settings, and a heavier user can top up part way through the afternoon. The exact runtime depends on wattage, since a draw at 12W consumes far less than a draw at 28W, and on how often you take puffs.

Charging is over USB-C, which means the same cable that charges a phone or a pair of earbuds will charge the Vinci. A full charge from empty typically takes somewhere between 45 and 75 minutes with a standard 5V phone charger. A few points on charging are worth knowing:

• Use a reputable charger and cable. Cheap unbranded chargers sometimes deliver unstable current, which is hard on any lithium-ion cell.
• Do not charge the device under a pillow, on a bed or in direct sunlight. Heat is the main enemy of battery life.
• Do not leave it charging overnight on a routine basis. Modern protection circuits prevent overcharging, but it is still better practice to unplug once the indicator shows a full charge.
• If you notice the battery draining much faster than before, check the coil first. A failing coil can cause the device to work harder than it should.

Pass-through use, meaning vaping while the device is plugged in, is possible but not advisable as a habit. It keeps the battery warm and puts extra strain on the cell.

On battery safety in general, the built-in cell is not user-replaceable, and you should never try to open the device. If the casing becomes swollen, unusually hot, or smells odd, stop using it and take it to a recycling point instead of continuing to use it. When the device eventually reaches the end of its life, recycle it. Vapes contain lithium batteries, which are a fire risk in household waste and in recycling lorries. In the UK you can take an old vape to the small electrical items bins at many recycling centres and supermarkets, and retailers that sell vaping products are required to offer take-back for waste electrical equipment. Do not put a vape in the general bin or the kerbside recycling.

Coil technology and the PnP system

The coil is the part that actually heats the liquid, and it is where this kit earns most of its keep. The Vinci Pod uses Voopoo's PnP (plug and play) coil system. A PnP coil is a self-contained unit with the heating element and cotton wick built in, and it seats into the pod with a simple press-fit. There is no building, no wicking and no tools. When a coil is spent, you pull it out and push a new one in.

PnP coils come in several types, which is one of the advantages of the platform. The main categories are:

• Mesh coils at higher resistance (around 0.3 ohm to 0.6 ohm): designed for lower wattages and nicotine salts. These deliver a tighter draw and concentrated flavour, and they use liquid slowly.
• Mesh coils at lower resistance (around 0.2 ohm and below): designed for higher wattages and a warmer, airier draw. These produce more vapour and use more liquid.
• Regular wire coils: simpler in construction and sometimes gentler on thicker liquids, with a slightly different flavour character.

The practical guidance is to start with the coil that ships in the box, run it within its recommended wattage range, and note how it behaves before moving to a different resistance. Each coil has a wattage range printed on it or listed in the manual, and staying inside that range matters. Running a coil above its range burns the cotton and produces a harsh, scorched taste that never fully recovers.

How long does a coil last? Roughly one to three weeks of regular use for most people, depending on the liquid. Sweet, thick liquids shorten that, while lighter fruit and tobacco liquids stretch it. Signs that a coil has reached the end include a flat or muted flavour, a slightly burnt note, gurgling, or a draw that feels warm without producing much vapour. Replacing the coil is cheaper and easier than people expect, and it nearly always restores the original flavour.

Priming a new coil is the most important step in the whole process. Put a few drops of liquid directly onto the cotton through the coil's wicking holes, fill the pod, and wait for five minutes before you vape. Skipping this step is the most common cause of a burnt first draw and a ruined coil.

Nicotine strength guidance

Choosing a nicotine strength is the decision that most affects whether you enjoy a pod kit, and getting it wrong is the commonest reason beginners give up. In the UK, e-liquid is capped at 20mg/ml of nicotine (sometimes written as 2%), so whatever you buy from a UK retailer will sit at or below that ceiling. This kit is a refillable device, not a single-use product, so you choose the strength yourself when you buy a bottle.

The following is a general guide. It is not medical advice, and nicotine is addictive, so non-smokers and under-18s should not use any nicotine product.

• Heavy smokers (20 or more cigarettes a day, first cigarette within 30 minutes of waking): 18mg to 20mg nicotine salt is a common starting point. Nicotine salts deliver nicotine faster and with less throat harshness than freebase at the same strength.
• Moderate smokers (10 to 20 cigarettes a day): 10mg to 12mg nicotine salt usually works well.
• Light smokers or social smokers: 5mg to 10mg nicotine salt, or 3mg to 6mg in a freebase liquid.
• Existing vapers stepping down: reduce by small steps, for example from 20mg to 12mg to 6mg over several weeks, rather than dropping abruptly.
• Freebase liquids: the Vinci Pod can handle them, but at high strengths freebase feels harsh in a small pod. Keep it to 6mg or below, and expect to run a slightly higher wattage.

Signs that your strength is too low include constantly reaching for the device, cravings returning shortly after a session and chain vaping without feeling satisfied. Signs that it is too high include dizziness, nausea, a racing heart, headaches, or a throat hit that is uncomfortably strong. If you notice any of those, stop, drink some water, and move down a strength next time.

One further point on strength and wattage together. A high-strength nicotine salt at high wattage delivers a lot of nicotine very quickly, and it can be unpleasant. If you want to vape a stronger liquid, keep the wattage low and the draws short. If you want bigger vapour, use a lower strength. The two do not combine well at the extremes, and a little experimentation in the first week pays off.

Who the Vinci Pod Royal Edition suits, and who should skip it

No device suits everyone, and a pod kit sits in a particular niche. The sections below set out who is likely to be happy with this kit and who might do better elsewhere.

It is likely to suit:

• Adult smokers moving to vaping who want something simple, with draw activation and no complicated settings to learn
• Former disposable users who want to keep a compact device but cut running costs and waste
• Vapers who prefer a mouth-to-lung draw and nicotine salts
• Anyone who values a good-looking device and is willing to pay slightly more for the Royal Edition finish
• People who want a second, pocketable device to carry alongside a larger setup

You may want to skip it if:

• You want large clouds. A pod device at this power level is not built for direct-to-lung, sub-ohm vaping, and a mod and tank would serve you better.
• You want very long battery life without charging. An 800mAh cell is fine for a day but will not match a larger device on a heavy-use weekend.
• You want a throwaway device you never have to maintain. A refillable kit needs filling, occasional cleaning and coil changes. If that sounds like a chore, a closed pod system with pre-filled cartridges might suit you better.
• You are under 18 or you do not currently use nicotine. Vaping is intended as an alternative for adult smokers, not as a starting point for non-smokers.
• You are on a very tight budget for the upfront price. The kit costs more on the day than a cheap starter pod, though it normally works out cheaper over a few months.

If you are undecided, consider how you actually vape. Someone who takes a handful of short puffs through the day will find a pod kit comfortable and economical. Someone who vapes continuously in long sessions will spend more time refilling and charging than they would like, and may be happier with a larger-capacity setup.

Finally, if you are using vaping to stop smoking, remember that local stop-smoking services in the UK often provide free support and, in some areas, free starter kits. It is worth asking your GP or pharmacist about the options available where you live.

How to fill, prime and use the kit

Setting up a refillable pod for the first time takes about five minutes and is not difficult. Follow the steps in order and you should avoid the common beginner mistakes.

• Step 1, unpack and check: remove the pod and the coil from the packaging. Check that the coil is seated firmly in the pod and that there are no visible cracks in the plastic.
• Step 2, prime the coil: put a few drops of e-liquid onto the cotton through the wicking holes on the coil. This stops the first draw from burning dry cotton.
• Step 3, fill the pod: open the silicone plug on the fill port, tilt the pod slightly, and fill slowly with the nozzle of the bottle. Stop at or just below the max line. Never overfill, because excess liquid floods the airflow and causes leaks and gurgling.
• Step 4, close the port: press the silicone plug fully back in, so it sits flush with the pod body.
• Step 5, rest the pod: wait five minutes so the cotton can saturate.
• Step 6, insert the pod: click the pod into the device body until it seats.
• Step 7, power on: follow the button sequence in the manual to switch the device on. Many Voopoo devices use a rapid press of the fire button to turn on and off.
• Step 8, set your wattage: start at the low-to-middle end of the coil's recommended range and adjust up or down in small steps until the draw feels right.
• Step 9, take the first few draws gently: short, slow puffs let the coil warm up and the cotton settle.

For day-to-day use, take draws of two to four seconds, with a pause between puffs so the coil can rewet. Chain vaping without pauses is the fastest way to dry out the cotton and shorten the life of the coil. Pull the draw at a steady pace instead of a hard sudden inhale, since the airflow is designed for a smooth, gentle pull.

When the liquid level in the pod drops to roughly a quarter full, refill it. Running a pod completely dry burns the cotton even in a fresh coil, and that single mistake accounts for many coils being thrown away early. It is also worth checking the liquid level before you leave the house, since a pod that runs out mid-day is more annoying than one that is topped up the night before.

To clean the device, keep it dry. Wipe the body with a dry cloth and clean the contact points with a cotton bud. Do not run the device body under water, as only the pod is safe to rinse.

Troubleshooting common problems

Most problems with pod kits have simple causes, and most can be fixed at home. Here are the faults we see most often, with the usual cause and the usual fix.

• The device does not fire: check the battery first and charge it if it is low. Then remove the pod and reseat it firmly. Wipe the contact points with a dry cotton bud. If a draw-activated sensor seems unresponsive, try the fire button instead.
• Burnt or harsh taste: usually a dry coil, an overused coil or wattage set too high. Lower the power, make sure the pod is not nearly empty and replace the coil if the taste persists. Check that you primed the coil when you fitted it.
• Gurgling or spitting: too much liquid in the airflow path. Remove the pod, blow gently through the mouthpiece to clear any pooled liquid and wipe the mouthpiece. Avoid filling past the max line next time.
• Leaking: check that the fill plug is fully seated, that the coil is pushed all the way into the pod and that the pod is not cracked. Heat and air pressure changes (for instance on a flight) can also push liquid out, so keep the device upright and ideally empty the pod before travelling.
• Weak vapour or flat flavour: a worn coil, a very thick liquid or low wattage. Swap the coil, try a thinner liquid or raise the power slightly.
• Short-circuit or check-atomiser message: remove the pod, check the coil seat, clean the contacts and try again. If the message remains with a new coil in a clean pod, the contacts or the board may be at fault and the device should go back for assessment.
• Battery drains quickly: a failing coil makes the device work harder, so replace the coil first. If the problem remains with a new coil, the cell may be ageing.
• The pod will not click in: check for dried liquid around the connection and wipe it clean. Make sure the pod is aligned the right way round.

If none of this resolves the issue, stop using the device and contact the retailer with your order number and a short description or photo of the fault. Do not try to open the casing, as the battery is sealed inside and attempting repairs is a safety risk.

One last tip is to keep a spare coil or two at home. A pod kit that is out of action because you have no replacement coil is a common frustration, and having a spare on hand means you can swap it in at once and carry on. Coils are small and cheap, and buying a multipack is usually better value than buying them one at a time.

Value for money and how it compares

Judging value in the pod category means looking at three costs together: the upfront price of the kit, the running cost of liquid and coils, and the cost of replacing the device when it wears out. On those measures a refillable kit like the Vinci Pod Royal Edition tends to do well against single-use devices, which no longer exist as a legal option in the UK, and against pre-filled pod systems that charge a premium for each cartridge.

As a rough guide to running costs, a 10ml bottle of nicotine salt typically costs a few pounds and fills a 2ml pod around five times. A coil costs a small amount and lasts a week or two. Over a month, that comes out at a modest figure compared with buying a pack of cigarettes every couple of days. The Royal Edition's extra cost over the standard Vinci Pod is for the finish, so if you care only about performance, the standard kit gives you the same electronics for slightly less.

How does it compare with other pod kits sold in the UK? We have tried to keep these comparisons fair.

• Vaporesso XROS series: a popular rival with a similar pod size and a comparable coil system. XROS devices are often a touch simpler, with fewer adjustments, which some beginners prefer. The Vinci Pod's adjustable output gives you more room to tune the draw.
• Uwell Caliburn series: well regarded for smooth, cool draws and a simple interface. The Caliburn range leans towards low-power mouth-to-lung vaping. The Vinci Pod covers similar ground but tends to give you a bit more power headroom.
• Smok Novo series: offers a large library of pods and a long track record. Novo devices are often cheaper and a little plainer in finish, while the Vinci Pod's PnP coils offer more variety in resistance.
• Geekvape Wenax series: compact and sturdy with a good reputation for leak resistance. It is a sensible alternative if you prioritise robustness over looks.

There is no single correct choice here. All of these are capable devices, and the differences are matters of ergonomics, coil availability and personal taste. Where the Vinci Pod Royal Edition stands out is the combination of a polished exterior, the wide PnP coil range and enough adjustability to suit both nicotine salts and lighter freebase liquids. Where it falls short is battery capacity, which is average for the class, and the 2ml pod size, which is the same for every UK-legal pod kit.

In short, it is a good-value choice for adults who want a refillable pod they can run economically and maintain easily, with a little extra style on top. If you vape heavily or want large clouds, look at a larger device. If you want a straightforward, good-looking pod kit with coil choice, this one deserves a place on your shortlist.