Voopoo TPP X Pod Tank 2ml Gold

Overview

The Voopoo TPP X Pod Tank 2ml Gold by Voopoo in Gold at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Voopoo TPP X Pod Tank 2ml: what it is and what it does

The Voopoo TPP X Pod Tank 2ml is a replacement refillable pod for Voopoo devices that use the TPP-X pod format. It is an accessory, not a complete vape. There is no battery, no screen and no chip in the pack. What you get is the tank section that clicks onto a compatible Voopoo device, holds your e-liquid and houses the coil that turns it into vapour. If you already own a compatible device and your current pod is cracked, leaking, clogged or simply tired of tasting like last week's flavour, this is the part you are looking for.

The 2ml size is the headline. UK rules limit refillable tanks and pods sold for nicotine vaping to 2ml, so this is the version designed to sit within that ceiling. Voopoo sells larger pods in other markets for similar hardware, but those are not legal to sell here for nicotine use. If you have seen a bigger TPP-X pod advertised overseas, the 2ml tank is the UK equivalent.

In practical terms, here is what the tank does for you:

• Holds 2ml of e-liquid, enough for a few hours of moderate vaping before a refill.
• Accepts replaceable coils from the Voopoo TPP family, so the tank can outlast any single coil.
• Refills through a dedicated filling port, so you can use a standard 10ml bottle with a thin nozzle and no tools.
• Locks onto the device without adapters, which keeps swap-outs quick.

This guide covers what the tank is, how it behaves in use, which e-liquids and nicotine strengths suit it, what to do when it misbehaves, and how it compares with the alternatives. We have tried to be straight about the limits as well as the strengths, because a pod tank is a small, inexpensive part and the right decision usually comes down to whether it matches your device and your vaping habits.

Everything here assumes you are over 18 and already use nicotine. Refillable pod tanks are for adult smokers and vapers who want a rechargeable, refillable setup, not for anyone who does not currently use nicotine.

Compatibility, capacity and UK limits

The first thing to confirm before buying is fit. This tank is designed for Voopoo devices that take the TPP-X pod format. The pod locks onto the device with its own connector, so it does not work with other brands' pod systems, and it will not fit other Voopoo pod families such as the PnP style pods or the smaller cartridge-type pods used on entry-level kits. Check your device's model name and the pod type printed in its manual or on the box. If you are unsure, message us with the model name before you order and we will confirm whether the tank fits.

Capacity is 2ml. That is not a Voopoo quirk but a legal ceiling. Under the UK Tobacco and Related Products Regulations 2016, refillable tanks sold for nicotine vaping cannot hold more than 2ml. The same rules cap e-liquid bottles at 10ml and nicotine strength at 20mg/ml. That 20mg/ml figure is also the ceiling that applied to disposable vapes before single-use devices were banned from sale across the UK in June 2025, so any nicotine e-liquid you buy here already sits at or below it.

A few practical consequences follow from the 2ml limit:

• You will refill more often than you would with a 4ml or 5ml pod sold abroad. Plan to carry a 10ml bottle if you vape heavily through the day.
• Each 10ml bottle fills the tank roughly five times, which is a useful way to judge how long a bottle will last you.
• Only fill to the marked level. Overfilling floods the coil chamber and is the single most common cause of leaks.
• Nicotine-free e-liquid has no strength limit and can be used in the same tank if you want to step down.

It is also worth knowing what is not covered by this listing. The tank is the pod body. Depending on how the listing is set up, a coil may be pre-installed or sold separately, so check the product description and the items in the pack before assuming you can fill and vape straight away. Where a coil is not included, you will need a compatible Voopoo TPP coil, and it is worth ordering a spare at the same time so you are not left without a working setup when the first coil wears out.

Finally, the sale of nicotine vaping products is restricted to adults aged 18 and over in the UK. We will not sell to anyone under 18, and the same applies to anyone buying on their behalf.

Performance and vapour delivery

A pod tank on its own does not have a puff count the way a disposable does, because the number of puffs you get depends on your e-liquid, your coil, your wattage and how you draw. We can still give a realistic range. Disposable vapes sold in the UK are built around 2ml of liquid and are typically rated at about 600 puffs. A 2ml fill in this tank is the same volume, so a reasonable expectation is somewhere between 500 and 700 puffs per fill at moderate power with a normal draw. Push the wattage up and the same 2ml disappears faster, sometimes dropping toward 400 puffs. Keep the wattage low and take shorter draws and you may stretch it beyond 700.

What you can expect from the way it delivers vapour:

• Fast wicking. A mesh-style coil has a large surface area, so liquid reaches the heating element quickly and the first puff after a rest is usually clean rather than dry.
• Even heating. Mesh spreads heat across a wide area, which tends to give a steadier vapour temperature than a small round wire coil.
• Controlled airflow. The airflow is intended for a restricted lung draw, a tighter pull than a wide-open sub-ohm tank, which also keeps throat hit comfortable at higher nicotine strengths.
• Quick response. The device fires when you draw, so there is little delay between inhale and vapour.

Draw style matters more than people expect. A slow, steady four-second draw gives the coil time to wick and keeps the vapour warm rather than hot. A hard, fast pull on a mesh coil can outrun the wicking, which shows up as a faint burnt note or a dry puff. If you are moving over from a disposable, expect the first few days to feel different, because a refillable gives you control that a disposable removes: wattage on the device, airflow on the pod, and the choice of e-liquid.

Vapour volume with a 2ml restricted-lung tank is moderate. It will produce clearly more vapour than a small starter pod system but less than a large sub-ohm tank. For most people switching from cigarettes, the volume is enough to feel satisfying without drawing attention or leaving a cloud behind. If cloud chasing is your goal, this is not the right tool and a larger sub-ohm tank on a different device is a better fit.

Coil and mesh technology

The tank is only half of the story. The coil inside it decides most of what you taste and feel. Voopoo's TPP-series coils are mesh-based: instead of a round wire wrapped around cotton, the heating element is a flat mesh screen that sits against the wicking cotton. The mesh gives a larger contact area between metal and liquid, which is why this style is associated with quicker heat-up, stronger flavour and a longer working life than a basic round-wire coil.

Coil resistance and wattage are the two numbers to watch. Coils in this family are low-resistance parts, typically in the region of 0.15 to 0.3 ohm for the common options, with a recommended wattage range printed on the coil or its packaging. The rule of thumb is to start at the low end of that range, vape for a day, and only then nudge the power up. Running a mesh coil at the top of its range from the first puff burns through cotton quickly and shortens its life.

Coil life depends on what you put through it:

• Typical life is one to two weeks for a regular user, and sometimes longer on light use with clear, non-sweetened liquids.
• Sweet or creamy liquids leave sugar and residue on the mesh, which darkens the cotton and dulls the taste faster.
• High wattage and chain vaping both shorten life, because the cotton cannot re-wet between puffs.
• Nicotine salts are gentler on a coil than high-strength freebase at the same power, so they are usually the more sensible choice here.

Replace the coil when you notice any of these signs: flavour is flat even with fresh liquid, the vapour tastes slightly burnt, the coil gurgles or crackles, or you are getting dry hits when the tank is clearly full. Priming a new coil properly, covered later in this guide, adds noticeable life to it.

Because the coil is a separate, replaceable item, the tank itself should last far longer than any single coil. In normal use, the pod body can stay in service for months, provided the seals remain intact and you rinse it between flavour changes. That separation is the main financial argument for a refillable TPP-X setup: you are paying for coils as a consumable rather than throwing away a whole pod each time.

Flavour profile and e-liquid pairing

An empty pod tank has no flavour of its own, so any talk of flavour here is really about how the tank and its mesh coil treat the e-liquid you choose. The short version is that mesh coils are good at carrying flavour detail. Fruit notes come across distinct rather than blended, and menthol and mint stay crisp rather than turning harsh. The tank body is made of materials that do not add a taste of their own, so the coil and liquid get the credit or the blame.

This product family has six variants listed. For an accessory, variants usually refer to finish or colour rather than anything inside the tank, so pick the one that matches your device or your taste in looks, and check the variant selector on the product page to confirm what each option is. The internals and capacity are what matter for performance, and those are the same across the family.

If you are deciding what to put in it, these styles tend to suit a restricted-lung mesh pod:

• Blue raspberry ice: bright, sharp fruit with a cooling finish, one of the most popular profiles in the UK.
• Strawberry and kiwi: a balanced sweet and tart pairing that stays readable on mesh.
• Mango and peach: softer, juicier fruit that works well at low to moderate power.
• Fresh mint or menthol: clean cooling profiles that are easy on the coil and tend to give long coil life.
• Cola and lemon: sparkling, tangy profiles that taste good in short sessions.
• Classic tobacco: a good option if you are moving over from cigarettes and want a familiar note.
• Vanilla custard or banana dessert: richer and thicker, enjoyable but harder on the coil.

Two practical notes. First, e-liquids with a lot of sweetener or heavy cooling agent can leave a film on the mesh, so if you love those styles, expect to change coils more often. Second, when you change flavour, rinse the pod with warm water, dry it fully, and refill. Ghosting, where a previous flavour lingers, is mostly down to old liquid clinging to the cotton and tank walls. If the ghost does not clear after a rinse, the coil is probably the culprit and it is cheaper to replace it than to keep chasing the taste.

Design and build quality

Pod tanks of this type are small, light moulded parts, and the build quality is easiest to judge by the details rather than by weight. The tank body is a transparent or translucent plastic shell so you can see the liquid level at a glance, with a mouthpiece at the top, a coil seat at the base and a set of silicone seals that keep the liquid where it belongs. The connection between pod and device uses a push-fit design that should click into place and sit flush with the body of the device without wobble.

When your tank arrives, it is worth a thirty-second inspection:

• Check the window and body for cracks or scuffs. A hairline crack will leak even if it looks cosmetic.
• Check that the silicone seals are seated. They should sit evenly with no twisted or pinched edges.
• Check the contacts at the base. They should be clean, bright and free of residue.
• Check the mouthpiece. It should be smooth with no moulding flash or rough seams.

The mouthpiece is shaped for a comfortable fit between the lips and is slim enough for a restricted-lung draw without feeling like a straw. Because the tank is see-through, you will notice discolouration over time. E-liquid with strong dyes or sweeteners can tint the plastic slightly, which is cosmetic and does not affect performance. If the plastic goes cloudy or cracks, that is the tank telling you it has had enough.

On the device side, the pod should engage with a firm click and not rattle in its bay. If you find it loose, remove it and check that no stray liquid, lint or pocket debris is sitting in the contact area. A wipe with a dry cotton bud usually fixes this.

One honest limitation: any moulded pod is a consumable. It tolerates normal handling, but dropping it onto a hard floor, leaving it in a hot car or crushing it in a bag with keys will shorten its life. A small case or a separate pocket for spare pods is a sensible habit, and it costs next to nothing. Treat the tank as a part you will replace eventually, not as something permanent, and you will not be disappointed.

Battery, power and charging

This tank has no battery. Power comes entirely from the Voopoo device it sits on, so battery capacity, charging speed and wattage output are properties of your device rather than the pod. That is worth saying plainly because shoppers sometimes look for a mAh figure on an accessory listing. If you need the number, check your device's specification: devices in the Drag range and other TPP-X compatible models vary in battery capacity, so look for the rated mAh in the manual or on the box.

As a rough guide to how the pairing behaves, a 2ml fill at moderate power uses a modest amount of energy. A device with a battery in the 1,500 to 3,000 mAh region will normally get through several 2ml fills per charge at moderate settings. Higher wattage drains the battery faster and the liquid faster, so power use and liquid use rise together.

Good charging habits protect both the device and your safety:

• Use the cable that came with the device or a reputable USB-C cable from a known brand, plugged into a standard wall adapter or computer port.
• Remove the pod before long charges if you notice any warmth or leaks, and keep the contacts clean.
• Do not charge unattended or overnight on a bed or sofa. Lithium batteries should charge on a hard, non-flammable surface where you can see them.
• Stop using a swollen, hot or damaged device. Do not charge it, and take it to a recycling point.

Battery recycling is a legal and safety matter in the UK. Never put vapes, batteries or devices in household bin bags or kerbside recycling. Lithium cells can start fires in collection vehicles and sorting plants. Instead, take old devices and batteries to a household waste recycling centre or to a retailer take-back point. Many shops that sell vaping products are required to accept used vapes for recycling, and local authority sites take small electricals as well.

The tank itself contains no battery and can be disposed of more simply. Empty any remaining liquid, remove the coil, and check with your local recycling centre about the plastic and metal components. When in doubt, a small-electricals drop-off is the safest route.

Nicotine strength guidance

The tank does not set your nicotine level; your e-liquid does. But the pairing of a mesh coil, restricted-lung airflow and a 2ml reservoir does affect which strengths feel right. In the UK, nicotine e-liquid is capped at 20mg/ml, and the choice below that ceiling comes down to your smoking history, the type of nicotine in the liquid and how much power you run.

There are two broad types of nicotine in retail liquids:

• Nicotine salts are smoother at higher strengths and are commonly sold at 10mg/ml and 20mg/ml. They suit low to moderate wattage and are usually the sensible pairing for this style of tank.
• Freebase nicotine is the traditional form, usually sold at 3mg/ml, 6mg/ml, 12mg/ml and 18mg/ml. It is harsher at the top of the range but works well at lower strengths with more airflow or higher power.

A starting point for most adult smokers:

• Heavy smokers (20 or more cigarettes a day): nicotine salt at 20mg/ml, or freebase at 12mg/ml to 18mg/ml.
• Moderate smokers (10 to 20 a day): nicotine salt at 10mg/ml to 20mg/ml, or freebase at 6mg/ml to 12mg/ml.
• Light smokers or social smokers: nicotine salt at 10mg/ml, or freebase at 3mg/ml to 6mg/ml.
• Experienced vapers stepping down: freebase at 3mg/ml or lower, or nicotine-free liquid mixed into your mix.

Signs you have the wrong strength are easy to read. If you feel dizzy, lightheaded, nauseous or notice a harsh throat hit, you are probably on too high a strength or drawing too hard. If you find yourself vaping constantly and still craving cigarettes, the strength is probably too low. Adjust by one step at a time rather than jumping, and give each change a couple of days.

Remember that the 2ml tank is refilled often. Because you top it up through the day, a stronger salt in a small tank means a steady nicotine intake. If you tend to chain vape out of habit, a lower strength may keep you more comfortable. This is general information rather than medical advice. If you are trying to quit smoking, NHS stop-smoking services offer free support and can advise on nicotine replacement alongside vaping.

Who the Voopoo TPP X Pod Tank is for, and who should skip it

This tank suits a specific type of vaper, and it is better to know that before you order than after. It is a replacement part, so the first question is whether you have the device it fits. If you do, the next questions are about habits and priorities.

It is a good fit if you are:

• An existing owner of a compatible Voopoo TPP-X device who needs a replacement pod because your current one has failed or worn out.
• A smoker or ex-smoker who prefers a refillable setup and wants to choose their own e-liquid and nicotine strength rather than being locked to a disposable's flavour.
• Someone who values lower running costs. Once you have the device, e-liquid and occasional coil swaps cost less per day than buying single-use products.
• A user who wants control over power and airflow without the bulk of a large mod and a big tank.
• Someone who wants to cut down on waste. Replacing coils and refilling a tank produces less waste than discarding a whole device after each use.

You should skip it, or think twice, if you are:

• Not an adult nicotine user. Vaping is for adult smokers and vapers only, and we will not sell to under-18s.
• Without a compatible device. The tank does nothing on its own, and it will not fit other brands.
• Looking for a plug-and-play product with no maintenance. Refilling, priming and coil changes are part of the routine, and they are not for everyone.
• Chasing big clouds. A 2ml restricted-lung tank is for flavour and throat feel, not for large vapour production.
• Planning to use very thick, sweet dessert liquids all day. They will be tough on the coil and you will replace coils often.
• Unwilling to carry a bottle. A 2ml tank runs out in a few hours for moderate users, so you need access to refills.

If you land in the second list, a pre-filled pod system or a larger tank on a different device may be a better route. If you are in the first list, the tank is a simple, sensible way to keep your existing device running. Either way, we would rather you buy the right thing than the wrong one, so contact us if you are not certain.

How to fill, prime and use the tank

Getting the first fill right makes the difference between a smooth first day and a flooded device, so it is worth following the steps in order. The exact way the filling port opens depends on the pod's design, so follow any arrows or markings on the pod body and the instructions in the pack.

• Step 1, prepare. Wash your hands, remove the pod from the device and, if the coil is not installed, press a compatible TPP coil firmly into the base until it seats fully.
• Step 2, open the fill port. Uncover or pull back the filling port as the pod's design directs. Keep the pod upright so the liquid does not run into the airflow channel.
• Step 3, fill slowly. Hold the bottle nozzle against the port and let the liquid run down the inside wall. Stop at the maximum fill line. Do not squeeze the bottle hard, and never overfill.
• Step 4, close up. Re-seat the port cover or bung fully and wipe away any liquid from the outside of the pod.
• Step 5, prime. Stand the pod upright for five to ten minutes so the cotton soaks through. This is the most important step for coil life, and skipping it is the main cause of burnt first puffs.
• Step 6, fit and test. Click the pod onto the device, switch it on and take two or three gentle draws without pressing hard. Start at the low end of the coil's wattage range.

Day-to-day use is simple. Draw slowly for three to four seconds, pause between puffs, and top up when the liquid falls to the bottom quarter of the window. Letting the tank run completely dry is bad for the coil because the cotton burns when there is nothing to wick.

A few habits that extend life:

• Keep the device upright when it is not in use, with the pod at the top, to reduce seepage.
• Store spare pods and coils in a cool place away from direct sun or hot cars.
• Rinse and dry the pod every time you change flavour.
• Check the filling port after each refill to confirm it is closed and clean.

Avoid pressing the firing button when the tank is empty, and avoid leaving a freshly filled pod in a warm pocket, which can push liquid out through the airflow. If you are travelling, particularly by air, empty the pod first because pressure changes encourage leaks.

Troubleshooting common problems

Most issues with a pod tank come down to a short list of causes, and nearly all of them are fixable at home. Work through the symptom that matches yours before assuming the tank is faulty.

• Leaking from the base or airflow holes. The usual causes are overfilling, a loosely seated coil or a pinched seal. Empty the pod, wipe it dry, re-seat the coil and seals, and refill below the max line. Thin, low-VG liquids leak more easily than thick ones.
• Dry or burnt taste. This is almost always an unprimed coil, a worn coil or wattage set too high. Prime for ten minutes, lower the power, and replace the coil if the taste persists with fresh liquid.
• Weak flavour. The coil may be coated with residue from sweet liquids. Change the coil, rinse the pod, and try a less sweet liquid for comparison.
• Gurgling or spitting. Condensation or excess liquid is sitting in the airflow channel. Wipe the mouthpiece, tilt the pod to let it drain, and avoid filling to the very top.
• No vapour or a pod error on the device. Remove the pod, wipe the contacts on both pod and device with a dry cotton bud, and re-seat firmly. If the error persists, try a different coil to rule out a faulty one.
• Liquid in the mouth. This points to flooding. Blow gently through the pod mouthpiece to clear the channel, dry it, and let the coil rest before firing again.
• Cracked or cloudy plastic. Replace the pod. Do not tape or glue it, because liquid and nicotine can seep through the repair.

Two diagnostic habits will save you time. First, change only one thing at a time: if you swap coil, liquid and wattage together, you will not know which fixed the problem. Second, keep a spare coil. Most of the faults people blame on the tank turn out to be a worn coil, and having a replacement in a drawer turns a ruined evening into a two-minute fix.

If you have tried the steps above and the pod still leaks or fails to register, contact us with your order number and a short description or photo. A genuinely faulty pod is a matter for our returns process, which we cover in the FAQs below.

Value for money and how it compares

The honest way to judge value is to look at running cost rather than the price of a single part. A pod tank is a one-off purchase that, with reasonable care, lasts months. The recurring costs are the coils and the e-liquid. A mesh coil typically lasts one to two weeks, and a 10ml bottle fills the tank around five times. Compared with buying single-use vapes every few days, a refillable setup is generally cheaper per week after the first purchase, and it produces far less waste.

To work out your own figures, divide the tank price by the number of weeks you expect it to last, add the cost of coils over the same period, and add the cost of e-liquid you use in a week. Do the same sum for whatever you vape now. For most regular users, the refillable route comes out cheaper within a month or two.

How it compares with common alternatives, as fairly as we can put it:

• Versus pre-filled pods and cartridges. Pre-filled options are cleaner and need no refilling, but the flavour range is narrower and the running cost per day is higher. Refillable wins on cost and choice, pre-filled wins on convenience.
• Versus other brands' 2ml refillable pods. Vaporesso, Geekvape and Smok all sell competent 2ml UK-edition pods with replaceable coils. The differences are mostly coil range, coil price and how well the pod fits its device. Voopoo's advantage is the mesh coil family and the consistency of the TPP-X format across its devices, though some rivals have cheaper coils or a wider range. Because pods are not interchangeable between brands, the real decision is often the device you already own.
• Versus a larger sub-ohm tank. A sub-ohm tank gives more vapour and flavour volume, but it needs a bigger device and more power. A 2ml restricted-lung pod is simpler and more portable, at the cost of cloud size.

Where the tank is weaker: the 2ml capacity means frequent refills, the plastic body is a consumable, and the coil still has to be bought separately or in addition. None of these are faults, but they are costs to plan for.

Overall, if you own a compatible Voopoo device and want to stay refillable, replacing the tank with the matching 2ml version is the straightforward, low-risk choice. If you do not own one, compare the price of the full device against what you currently spend before committing.