VooPoo Vinci S Pod Kit Green Gradient

Overview

The VooPoo Vinci S Pod Kit Green Gradient by Voopoo in Green Gradient at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

VooPoo Vinci S Pod Kit overview: a refillable pod system for UK vapers

The VooPoo Vinci S Pod Kit is a refillable, rechargeable pod vape from Voopoo, the Shenzhen manufacturer behind the Drag, Argus and Vinci families. The Vinci line was built around a straightforward idea: a compact body you can carry in a jeans pocket, but with adjustable output and replaceable PnP coils rather than the fixed, throw-away approach of a pre-filled device. The S version follows that formula and is aimed at adult UK vapers who want more control and a lower running cost than a pre-filled device, without moving up to a full box mod and tank.

Because the kit is refillable, you buy the hardware once and then top the pod up with whichever nicotine salt or freebase e-liquid you prefer. That matters in the UK for two practical reasons. First, single-use disposable vapes have been illegal to sell since 1 June 2025, so a rechargeable, refillable kit is now the mainstream route for anyone who wants the convenience of a small pod format. Second, a refillable kit lets you choose your own nicotine strength anywhere up to the UK legal limit of 20mg/ml, and drop it over time if that is your plan.

This guide covers everything a buyer normally wants to know before ordering: what the kit is, what its specifications mean in daily use, how it performs, how the flavour behaves, how long the battery and coils last, which nicotine strength to pick, who should and should not buy it, how to set it up, what to do when something goes wrong, and how it stacks up against alternatives at a similar price. Where we cannot verify a figure for every colour variant, we say so rather than guess, and the specification table on the product page is always the final word on exact numbers.

A quick summary before the detail:

• Format: refillable pod kit with a built-in rechargeable battery and push-fit PnP-family mesh coils.
• Suited to: smokers switching to vaping, and existing pod users who want adjustable output and replaceable coils.
• Not suited to: anyone wanting a zero-maintenance, switch-on-and-forget experience, or anyone who does not already smoke or vape.
• Legal age: you must be 18 or over to buy and use this product in the UK.
• Nicotine: this product is intended for use with nicotine e-liquid, which contains a highly addictive substance. Use it only if you currently smoke or vape.

Key specifications and what they mean in everyday use

Specification sheets are easy to skim and hard to interpret, so here is what the main figures on a Vinci-family pod kit mean in practice. Exact numbers can differ slightly between revisions and colour options, so treat the list below as a guide to the format and check the product page specification panel for the precise value on the variant you are buying.

• Format: refillable pod system with an internal, non-removable lithium-ion battery. You never swap cells; you charge the whole device over USB-C.
• Pod capacity: 2ml in the UK-market configuration. UK rules cap refillable tanks and pods at 2ml, so the larger pods you may see in overseas listings are not what ships here.
• Coil system: Voopoo PnP-family replaceable mesh coils, which push into the base of the pod. This is the same coil family used across several Voopoo devices, which helps with availability.
• Battery: built-in rechargeable cell. The Vinci range sits broadly between the 800mAh class at the compact end and the 1,500mAh class at the larger end, and the S belongs in that bracket.
• Charging: USB-C, which means the same cable as most current phones and no proprietary lead to lose.
• Output: adjustable wattage with an automatic mode, typical of the Vinci line, so the chip can set power for the coil fitted.
• Activation: inhale-triggered, with a button used for switching on and off and changing modes.
• Filling: a fill port sealed by a silicone bung, so you fill from a standard bottle with a thin nozzle.
• Nicotine compatibility: suited to 10mg and 20mg nicotine salts, and to lower-strength freebase liquids when paired with a lower-resistance coil.

The figure people most often misread is battery capacity. A higher milliamp-hour (mAh) number does not automatically mean a better device; it means more stored energy. How long that energy lasts depends on the wattage you run and the resistance of the coil, which is why the battery section later in this guide works through the arithmetic.

Likewise, there is no puff-count rating for a refillable kit in the way there was for disposables. The number of puffs you get depends on how much liquid you load, how long you draw for, and how hard the coil is working. We give realistic ranges later rather than a headline figure that no refillable device can honestly promise.

Performance and vapour delivery

The Vinci S is built for a mouth-to-lung style of vaping, which means drawing the vapour into your mouth first and inhaling second, in the same way many people draw on a cigarette. That sits between a tight, low-power pod and a loose, high-power sub-ohm setup. It produces more vapour than a basic fixed-output pod, but it stays discreet enough for everyday use, and it keeps the throat hit manageable at the nicotine strengths most switchers use.

The coil you fit has more influence on the experience than any other variable. As a general rule, higher-resistance PnP coils give a tighter, more cigarette-like draw with less vapour and a stronger throat hit, while lower-resistance coils give a looser draw, warmer vapour and more of it, at the cost of faster battery and e-liquid consumption. Which coil comes in the box and which alternatives you can buy are listed on the product page, and it is worth ordering a spare coil with the kit so you can compare the two options.

Realistic expectations for puffs per pod are worth stating plainly. A full 2ml pod of nicotine salt at moderate output will usually deliver somewhere in the region of 400 to 600 puffs, depending on how long each puff is. Short, light puffs stretch the liquid further, while long, hard draws or high wattage drain it quickly. These are rules of thumb, not guarantees, and heavily sweetened liquids tend to shorten coil life rather than liquid life.

Vapour production is consistent across a pod rather than fading, provided the coil is primed correctly and the liquid is not too thick. The most common complaint with any mesh pod is a muted or burnt taste late in the pod, and that nearly always points to the coil needing replacement rather than the battery or the device being at fault.

• Throat hit: noticeable but controllable, mainly set by nicotine strength and wattage.
• Vapour volume: moderate, more than a basic pod and less than a sub-ohm tank.
• Ramp-up: quick, because mesh heats evenly across a wide surface.
• Consistency: stable across a pod when the coil is fresh and the liquid has a pod-friendly VG/PG ratio.

Flavour profile and e-liquid pairing

A pod kit has no built-in flavour of its own; the taste comes entirely from the e-liquid you load. What the hardware controls is how faithfully that flavour is delivered. Mesh coils like the PnP family are generally praised for clean, accurate flavour because they heat a large, even surface instead of a single hot wire, which reduces the scorched edge that can flatten delicate notes. In practice you will taste more detail from fruit and dessert profiles than you would from an older round-wire pod.

You may notice that our listing shows a number of options for this kit. These are variants of the same hardware family, usually colour finishes, so choose on looks and stock rather than expecting different tastes. Everything flavour-related is decided by the bottle you buy.

Liquid styles that tend to pair well with a mesh pod include:

• Tobacco: classic, roasted and sweet blend styles are popular with smokers moving over, because the draw and throat hit feel familiar.
• Menthol and mint: spearmint and peppermint stay crisp on a mesh coil and are a common first choice for switchers.
• Fruit ice: strawberry ice, blue raspberry ice and watermelon ice are widely used, and the cooling agent keeps higher-nicotine salts smoother.
• Berry blends: blueberry, blackcurrant and mixed forest fruit styles show off the clean flavour delivery.
• Cola and soft-drink styles: these read well at moderate wattage, though they can stain the pod over time.
• Custard and dessert: richer profiles work, but their sugars build up on the coil faster, so expect shorter coil life.

On liquid thickness, PnP-style mesh coils cope best with e-liquids in the range of roughly 50/50 to 70/30 VG to PG. Nicotine salts are normally 50/50, which suits this kind of pod well. Very thick liquids, such as 80VG or above, can wick too slowly and cause dry hits, particularly on lower-resistance coils.

Finally, a practical tip for flavour fans: if you change flavour often, rinse the pod and let it dry between liquids, or keep one pod per flavour family. Switching from a heavy dessert to a light mint in the same pod will leave ghost flavours behind, and no coil can fully separate them.

Design and build quality

The Vinci S keeps the compact, rounded look of the wider Vinci family. The body is sized to sit comfortably in one hand and slide into a pocket without the bulk of a mod. Voopoo bodies in this class are typically made from a zinc alloy or similar metal frame with a coated or textured finish, which gives a solid feel in the hand without excess weight. Colour options vary by variant, and the finish is the main difference between them.

Controls are kept simple. A single button handles switching on and off and changing mode, and the vapour itself is triggered by inhaling rather than pressing. That makes the device easy to learn, and it also means nothing is pressing on your finger for long sessions. The pod is a separate component that seats into the top of the body, and a firm, flush fit is the sign it is installed correctly.

Points to check when your kit arrives:

• Pod seating: the pod should sit level with the body with no visible gap. If it rocks or sits proud, remove it and push it in again.
• Fill bung: the silicone plug should be fully seated after filling. A loose bung is a common cause of leaks.
• Contacts: the metal contact points in the pod bay should be clean and dry. A little e-liquid on the contacts will interrupt firing.
• Drip tip: wipe it after use. Condensation collects here, and a damp tip is more likely to gurgle.

On durability, a pocket vape lives a harder life than a bedside device. It will be dropped, sat on and carried with keys. A metal body copes with that better than a plastic one, but the pod and the fill bung remain the vulnerable points, so a spare pod is a sensible purchase. Keep the device out of direct sunlight and do not leave it in a hot car, as heat is the quickest way to cause leaks and shorten battery life.

Design is subjective, and some people will find the Vinci S a little thicker than the slimmest pocket pods on the market. That trade-off is the price of a bigger battery and a more flexible chip, and it is a fair exchange if you want adjustable output.

Battery life, charging and power modes

Battery behaviour is the area where honest arithmetic is more useful than a marketing line. A device with a battery in the 800mAh to 1,500mAh class holds roughly 3 to 5.5 watt-hours of energy, once you multiply capacity by the nominal 3.7 volts. Not all of that is usable, so assume around 85 percent in real terms. At 12 watts, a 3 second puff uses about 0.01 watt-hours, which works out to somewhere around 200 to 400 puffs per charge depending on where the battery sits in that range and how long your puffs are.

That is an important number because a full 2ml pod is likely to last for 400 to 600 puffs. In other words, many users will need to charge about once per pod, sometimes a little more often at higher wattage. If you vape lightly or run a lower wattage, you may get a pod and a half from one charge. If you vape heavily, plan to top up midway through the day.

Charging is by USB-C. Practical guidance:

• Use a decent charger: a standard 5V phone charger or a laptop USB port is fine. Avoid unbranded, unmarked chargers.
• Expect roughly an hour: a full charge from empty typically takes in the region of 45 to 90 minutes depending on battery size and the charger used.
• Do not charge unattended overnight: charge on a hard, non-flammable surface, away from curtains and bedding, and unplug when full.
• Do not use while damaged: if the body is cracked, swollen or very hot, stop using it and arrange safe disposal.

On power modes, the Vinci line offers an automatic setting where the chip reads the coil and picks a suitable wattage, plus manual adjustment where you set it yourself. For most switchers, the automatic setting is the sensible starting point. Manual control is best used for small changes: nudging the wattage down to extend coil life, or up slightly to warm the vapour and improve flavour on a cool day.

Remember that wattage and coil resistance interact. A low-resistance coil drawn at high power will empty the battery and the pod quickly and may burn the coil early. If the flavour turns harsh, the correct answer is nearly always to reduce the power rather than to push through it.

PnP coil and mesh technology explained

The coil is the heart of any vape, and the Vinci S uses Voopoo's PnP family of replaceable coils. PnP stands for plug and play, and the name describes the experience: you pull out the old coil and push in a new one, with no tools and no wicking. The coil houses the heating element and the cotton that carries e-liquid to it, and it is the component that wears out first.

PnP coils are built around a mesh heating element rather than a coiled round wire. A mesh is a flat, perforated metal sheet with a large surface area. That design has a few consequences you can feel:

• Even heating: the whole mesh warms together, which reduces hot spots and the scorched taste they cause.
• Fast response: mesh reaches working temperature quickly, so vapour begins as soon as you inhale.
• Flavour accuracy: a larger heated surface renders flavour with more detail than a single small wire.
• Higher wicking demand: mesh vaporises liquid quickly, so very thick liquid can starve it.

Priming a new coil is the single most important habit with mesh. Dry cotton burns at the first draw, and a burnt coil cannot be rescued. After installing a coil, add a few drops of e-liquid directly onto the cotton through the coil's side holes if accessible, fill the pod, then leave it upright for around ten minutes so the cotton saturates. Take two or three gentle draws without pressing the button or inhaling hard, then start vaping at a low wattage and build up.

How long a coil lasts depends heavily on the liquid. Light, unsweetened styles such as tobacco and mint can give a couple of weeks of average use. Sweet, creamy and dessert liquids deposit sugars on the mesh and can shorten that to a week or less. Signs a coil is finishing include a muted or slightly bitter taste, reduced vapour, gurgling and a rougher throat hit.

A caution on compatibility: PnP is a family, and not every coil in it fits every device. Buy coils listed as compatible with this kit, and avoid unbranded copies, which can fit loosely, leak, or deliver inconsistent resistance. The product page lists the compatible coil options.

Nicotine strength guidance for UK vapers

In the UK, nicotine e-liquid is capped at 20mg/ml (2 percent), and refillable tanks and pods are capped at 2ml. These limits apply to everything sold here, which is why you will not find stronger liquid at a UK retailer. Single-use disposables, which also carried the 20mg cap, have been banned from sale since June 2025, so refillable kits like this one are the route for anyone who previously used a disposable.

There are two main types of nicotine, and they suit different setups:

• Nicotine salts: a smoother form that delivers nicotine more quickly and is easier on the throat at higher strengths. These are usually sold at 10mg and 20mg and are the natural choice for a pod kit like the Vinci S.
• Freebase nicotine: the traditional form, typically sold at 3mg, 6mg and 12mg. At higher strengths it feels harsh, so it suits looser draws on lower-resistance coils and higher wattage.

As a rough starting point, which is general information rather than medical advice:

• 10mg nicotine salt: a sensible start if you smoke fewer cigarettes a day, if you are already vaping at a lower strength, or if 20mg feels too sharp.
• 20mg nicotine salt: generally used by heavier smokers who find lower strengths leave cravings unsatisfied. Keep wattage moderate, as 20mg at high power feels harsh and uses nicotine quickly.
• 3mg to 6mg freebase: suited to lower-resistance coils at higher output, and to people who have already stepped down from salts.

A reliable sign you are on the wrong strength is how you behave. If you chain vape, feel lightheaded or queasy, or get a harsh throat, the strength is probably too high. If you keep reaching for cigarettes or feel unsatisfied after every session, it may be too low. Adjust one step at a time and give it a few days before changing again.

Many people use a vape to cut down or stop smoking and then reduce strength gradually. The NHS offers free stop-smoking support, and local services can advise on combining a vape with other aids. If you do not currently smoke, a nicotine vape is not for you: nicotine is addictive, and this product is not intended for non-smokers or for anyone under 18.

Who the Vinci S Pod Kit suits, and who should skip it

No device is right for everyone, and a clear view of who benefits and who does not saves money and frustration. Here is a straightforward breakdown.

It suits:

• Smokers switching to vaping who want a device with a familiar mouth-to-lung draw, a nicotine salt option and enough battery for a full day with a top-up.
• Former disposable users now that single-use vapes are off the shelves. A refillable kit offers the same pocketable convenience but with lower long-term cost and less waste.
• Existing pod users who want adjustable output and replaceable mesh coils rather than a fixed-power system.
• People who care about flavour, since mesh coils tend to render fruit, ice and dessert profiles with more detail.
• Anyone who wants to reduce waste, because only the coil or pod is replaced when it wears, while the body is reused.

You may want to skip it if:

• You want zero maintenance. A refillable kit means filling, priming and occasionally changing coils. That is a few minutes of effort, and if you want none, a simpler closed pod system may suit you better.
• You want large clouds. This is a mouth-to-lung pod. Direct-to-lung sub-ohm tanks and larger mods produce far more vapour.
• You do not currently smoke or vape. Nicotine is addictive. This product is not recommended for non-smokers, and it is illegal to sell to anyone under 18.
• You are pregnant, or have a heart condition or other health concerns. Speak to a GP or pharmacist first.
• You need the very smallest device. The adjustable chip and larger battery come at the price of some thickness, and slimmer fixed-output pods exist.
• You want to vape ultra-thick e-liquid. High-VG liquids can starve a pod mesh coil and cause dry hits.

If you sit somewhere in between, a good approach is to start with the automatic setting, a 10mg or 20mg nicotine salt in a flavour you like, and one spare coil. That keeps the first week simple, and you can fine-tune once you know what you prefer.

How to fill, activate and use the Vinci S

Setting up a pod kit for the first time takes a few minutes. Follow the steps below, and read the manual in the box for the exact button sequence on your variant, as click counts for switching on and off can vary.

• Step 1, unbox and inspect. Check the body for damage, confirm the pod is included and make sure the USB-C cable is present. Remove any protective film from the pod and drip tip.
• Step 2, check the coil. Most kits ship with a coil already fitted in the pod. If yours is separate, push it firmly into the base until it seats.
• Step 3, fill the pod. Remove the pod, pull out the silicone bung, and slowly squeeze e-liquid into the fill port. Aim the nozzle at the side wall of the pod, not directly down the central tube, and stop at the maximum fill line. Overfilling is the main cause of flooding and leaks.
• Step 4, close up and wait. Push the bung fully back in and leave the pod upright for about ten minutes so the new coil saturates.
• Step 5, seat the pod. Push it into the body until it sits flush. Wipe off any spilled liquid first.
• Step 6, charge if needed. A quick top-up before first use is sensible, especially if the battery arrived low.
• Step 7, switch on. Many pod devices use a multi-click on the button to switch on or off, commonly five clicks, though your manual is the reference. The indicator light confirms the device is awake.
• Step 8, take a gentle first draw. Use a slow, steady three to four second draw rather than a hard pull, then build up to your normal style.

Daily use is then a matter of drawing on the mouthpiece. The device fires when it senses your inhale, so there is no need to hold the button. If you want to change the power mode or wattage, use the button according to the manual, and give the new setting a few puffs before judging it.

Maintenance is light but worthwhile. Wipe the drip tip and the pod contacts regularly with a dry tissue. Top the pod up when the level falls to roughly a quarter full instead of running it dry, as running a mesh coil with little liquid causes dry hits and shortens its life. Never submerge the device in water, and never use alcohol or solvents on the body or the pod.

A final practical note on travel: carry the device with the pod empty or the bung firmly in place, and keep it out of hot cars. Air pressure changes on flights can push liquid out of a full pod, so empty it first or keep it sealed in a bag.

Troubleshooting common problems and safe disposal in the UK

Most problems with a pod kit have simple causes. Work through the likely ones before deciding anything is faulty.

• The device does not fire or the light flashes. Check the pod is seated fully, wipe the contacts with a dry tissue, and make sure the device is switched on and charged. A flashing light can signal low battery, a short circuit, or a poor connection.
• A burnt taste. This is almost always a dry or worn coil. If the coil is new, you probably did not prime it long enough. If it is old, replace it. Lowering the wattage can help while you decide.
• Weak flavour or low vapour. The coil may be failing, the liquid level may be low, or the liquid may be too thick. Try a fresh coil and a lower-VG liquid.
• Leaking. Check the pod is not overfilled, the bung is seated, and the pod is pushed fully in. Store the device upright where possible, and do not leave it somewhere hot.
• Gurgling. Condensation has gathered in the airflow path. Remove the pod, blow gently through the mouthpiece, and wipe it dry.
• Dry hits. The coil is not getting enough liquid. Top up, wait, and avoid chain vaping, which does not give the cotton time to re-saturate.
• Sore throat or harsh hit. Reduce the nicotine strength or the wattage, or switch to a lower-power setting.
• Slow or no charging. Try another cable and charger, and check the USB-C port for lint. Do not force the plug.

If you have worked through these steps and the device is still faulty, contact us with your order number and a short description. A manufacturer defect is a different matter from wear and tear, and we will help you work out which it is.

Disposing of a vape safely in the UK matters because the kit contains a lithium-ion battery that can cause fires if put in general waste or crushed in a bin lorry. Never dispose of the device, or its pods, in household rubbish or ordinary recycling bins. Instead:

• Take it back to a retailer. Under UK waste electrical rules, shops that sell vaping products are expected to accept used devices for recycling.
• Use a household waste recycling centre. Most council sites have a small electricals bay that accepts vapes.
• Look for local drop-off points. Many supermarkets and convenience stores run collection bins for small electricals and batteries.
• Do not dismantle the device. The built-in battery is not designed to be removed by the user.
• Dispose of leftover liquid carefully. Do not pour it down a drain; seal it and ask your local council about disposal.

Value for money and how the Vinci S compares with alternatives

The honest way to assess value on a pod kit is to look at the cost over several months, not just the price on the day. The kit has an upfront cost, then you pay for e-liquid and the occasional coil. A 10ml bottle of nicotine salt typically costs a few pounds and fills a 2ml pod several times over, and a coil usually lasts one to two weeks. Compared with buying pre-filled devices repeatedly, which is no longer possible in the UK in disposable form, a refillable kit works out cheaper for most regular vapers and produces far less waste.

Where the Vinci S earns its price is the combination of adjustable output, replaceable mesh coils and a rechargeable body that you keep. Where it asks more from you is in filling, priming and coil changes, which a closed pod does not demand. If you only vape occasionally, the cost advantage is smaller.

Here is how it compares fairly with other compact pod kits that UK buyers commonly consider:

• Vaporesso XROS series: a popular compact range known for simplicity, widely available pods and a small body. It generally has less output flexibility than the Vinci, so it suits users who want a straightforward experience. The Vinci offers more control, while the XROS is often the easier first device.
• Uwell Caliburn series: well regarded for flavour and a slim form factor, with a smaller battery in the usual versions. If portability is the priority, it is a strong rival. If battery life and adjustability matter more, the Vinci is the more flexible choice.
• Smok Novo series: a long-running pod range with broad coil availability, and it competes closely on price. Which is better depends on the specific model and the coil options you prefer, so compare the current versions side by side.
• Voopoo's own Drag and Argus ranges: they share the PnP coil family, so coil buying is familiar. The Drag line tends to focus on higher power, and the Argus line on simplicity, with the Vinci sitting between them.

It is fair to say that no single pod kit wins on every measure. Rivals may be slimmer, cheaper or simpler, and the Vinci S is a sensible choice when you want adjustable power, a decent battery and PnP coil availability in one pocketable device. Pairing it with a good nicotine salt and a spare coil is the most economical way to start.

Finally, price changes often, so check the current listing and any bundle offers on the product page. Buying a coil multipack with the kit is usually cheaper per coil than buying single replacements later.