SMOK IPX 80 Pod Vape Kit Grey

Overview

The SMOK IPX 80 Pod Vape Kit Grey by Smok in Grey at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

SMOK IPX 80 Pod Vape Kit: what it is and where it fits

The SMOK IPX 80 Pod Vape Kit is a refillable pod system built around a 3000mAh internal battery and a variable output of up to 80W. It sits in the gap between small, draw-activated pod kits and full box mods. You get the convenience of a pod that clicks in, comes out and refills in a few seconds, but you also get enough power on tap to run low-resistance mesh coils, which produce a warmer, denser and more flavour-forward style of vaping than the typical 10W to 15W starter pod.

SMOK has been making pod and mod hardware for a long time, and the IPX 80 follows the company's usual approach: a compact, pocketable body, a simple button layout, a small colour screen that shows the numbers you care about, and a coil system shared with other SMOK devices so replacement parts are easy to find in the UK. The kit is aimed at people who have outgrown a basic starter pod, or who are coming from a cigarette habit and want something that can keep up with a heavier draw without feeling like a brick in the pocket.

Because this is a refillable kit rather than a single-use device, it is also the legal and practical route for UK adult vapers following the ban on disposable vapes that came into force across the UK in June 2025. A kit like this is designed to be refilled, recharged and have its coils swapped, so a single device can last many months and the only things you throw away regularly are used coils and empty bottles.

This guide covers everything we think a buyer needs before ordering: the headline specifications, how the device performs at different wattages, what kind of e-liquid suits it, how long the battery realistically lasts, how to choose a nicotine strength under UK rules, who the kit suits and who should look elsewhere, how to set it up, how to fix the usual faults, and how it compares with similar kits from other brands. Where we give figures such as puff counts or charging times, they are practical estimates based on the battery size, power range and tank capacity, not laboratory results, and your own numbers will move with your wattage, puff length and e-liquid.

One note on variants: this product page groups seven versions of the kit together, so use the selector on the page to pick the one you want. All of them share the same electronics and the same pod and coil system, so everything below applies to whichever version you choose.

Specifications at a glance

Before going into detail, here is a quick reference. Figures marked as approximate are our own calculations or typical values for this class of device. Always check the printed information on the packaging and the spec table on the product page for anything you need to be exact, particularly coil resistance values, which can differ between the coil packs shipped with different kit batches.

• Maximum output: up to 80W, adjustable downwards in small steps through the on-device menu.
• Battery: built-in 3000mAh lithium-ion cell. It is not designed to be removed or swapped by the user.
• Charging: USB-C port, with charging possible while the device is in use (known as pass-through). A realistic full charge from empty is around one and a half to two hours on a 2A charger, which is an estimate.
• Pod capacity: 2ml in the UK, which is the legal maximum for refillable pods and tanks sold here. Larger pods sold in other countries are not relevant to UK buyers.
• Coil system: replaceable coils from the SMOK RPM 2 family, including low-resistance mesh coils for direct-to-lung vaping and a higher-resistance option for a tighter mouth-to-lung draw. Confirm the exact coil included with your kit on the listing.
• Firing: a firing button, with a colour display showing wattage, battery level and coil information.
• Safety protections: short-circuit, low-resistance and over-time protections are standard on devices of this class, and the screen will tell you when it detects a problem.
• Nicotine: compatible with any UK-legal nicotine e-liquid up to 20mg/ml, including freebase and nicotine salt formulations.
• Age restriction: sold to adults aged 18 and over only.

In the box you can expect the device itself, a pod, at least one coil, a USB-C charging cable and the manual and warranty card. Contents can vary slightly by variant, so read the listing before you buy if you need a spare pod included.

A word on puff counts. Disposable vapes advertise puff numbers because the device is sealed. A refillable kit is different: the number of puffs you get from one pod depends on the wattage you choose, the resistance of the coil, the thickness of the e-liquid and how long each draw lasts. As a practical rule of thumb, expect roughly 250 to 450 puffs from one 2ml pod at moderate power, fewer when you push towards the top of the range and more at low wattage with a higher-resistance coil. Those are estimates, not guarantees.

Performance and vapour delivery

The headline feature is the power range. At 80W maximum, the IPX 80 can run low-resistance mesh coils at the kind of wattage they were designed for. A mesh coil spreads heat across a wide surface rather than around a thin wire, which means it warms e-liquid quickly and evenly, so you notice a faster ramp-up when you press the button and a denser cloud for the same draw length. In practice most people will not run the device at full power for long. The sensible working range for the lower-resistance coils is somewhere between about 35W and 60W, with the top of the range kept for the days when you want the most vapour and are happy to burn through e-liquid and battery faster.

At low power the picture is different. Drop the output to the 15W to 25W region with a higher-resistance coil and the IPX 80 behaves like a compact tight-draw pod, producing cooler, smaller puffs that are closer to the throat hit of a cigarette. This flexibility is the practical reason to choose a variable-wattage kit over a fixed-output pod: the same device can be a gentle all-day option on a quiet day and a more powerful one when you want it, without buying a second kit.

Response from the button is quick and consistent for a device in this price bracket. Ramp-up on mesh coils is short, and the vapour production stays even through a long draw, which is a common weak point with cheaper kits that fade away after two seconds. Dry hits, the harsh burnt taste that appears when the wick cannot keep up with the power, are possible if you run a coil above its comfortable range or if you chain-vape without giving the cotton time to resaturate. That is a feature of the technology, not a fault of this particular kit, and it is easy to avoid by staying inside the wattage range printed on the coil and pausing for ten to fifteen seconds between long draws.

Thicker e-liquids with a high VG content cope well at higher wattage because the mesh has large wicking channels, while thinner 50/50 liquids are better suited to lower wattage, where thin liquid can flood and leak if the power is set too low for the coil. Matching the e-liquid thickness to the wattage is the single most useful habit for getting consistent performance from this device.

If you are used to a small pod kit, the first few days on a higher-powered device can feel like a big step up. Start at the low end of the range printed on the coil and increase in small steps. You will find your preferred setting quickly, and it is common to settle a few watts below the maximum the coil allows because the flavour is better there.

Flavour: what the coils do and which e-liquids suit the kit

A kit does not have a flavour of its own, so the taste depends on the e-liquid you put in the pod and on the coil that vaporises it. The mesh coils used with this system are good at preserving the detail in layered flavours. Because the heating surface is broad, the e-liquid is vaporised at a more even temperature and you are less likely to scorch the sweetener or the delicate top notes. This is why mesh tends to be recommended for fruit and dessert profiles that fall flat on cheaper cotton-and-wire coils.

To give a sense of what works well, here are eight flavour styles that tend to suit a 2ml pod running at moderate power:

• Tobacco: a classic or blended tobacco liquid gives a recognisable throat feel at lower wattage. Higher-resistance coils with a 50/50 or 60/40 liquid are the usual pairing for this style.
• Menthol and mint: cooling liquids hold up well at 25W to 45W. Too much power can make strong menthol feel sharp, so step the wattage down if it starts to feel harsh.
• Strawberry ice: a popular fruit-and-cooling blend. Mesh coils carry the sweetness without muddying the fruit.
• Blue raspberry: a sweet and slightly tart profile that does well at mid wattage with a high-VG liquid.
• Mango and tropical blends: thicker, juicier flavours that benefit from the quick ramp-up of a mesh coil.
• Watermelon and berry mixes: lighter fruit profiles that suit lower wattage and a 50/50 base.
• Vanilla custard and dessert styles: richer liquids contain more sweeteners, so they build up on coils sooner. Keep the wattage conservative and expect to change the coil a little more often.
• Cola and soda styles: sharp, fizzy profiles that benefit from a slightly higher wattage to bring out the spice notes.

Sweet liquids are the main thing that shortens coil life. Sucralose and other sweeteners caramelise on the mesh, leaving a film that dulls the flavour over time. If you vape dessert and heavily sweetened fruit liquids you should plan on swapping coils more often than someone who vapes tobacco or menthol. Many people simply carry one spare coil as a habit.

If you are changing flavours, do not just refill. Empty the pod, rinse it under lukewarm water, dry it fully and fit a fresh coil before using a different liquid. A coil that has been soaked in menthol will carry that ghost into the next flavour, and a pod that still contains the previous liquid will blend the two in ways you may not enjoy. It is cheap insurance for a clean taste.

Design, build quality and ergonomics

The IPX 80 is built as a compact, slightly rectangular device that fits in a jeans pocket without any awkward bulge. The body is made from a zinc alloy frame with a textured or coated finish depending on the version, which gives it some grip and helps hide fingerprints. It has the dense feel you expect from a metal-bodied device, and the weight sits comfortably in the hand without being tiring over a long session.

The pod clicks into the top of the device with a magnetic or snap-fit connection and sits flush, so there is little wobble. The fit matters in practice, because a pod that rattles can cause intermittent connection problems and leaks around the seal. In normal use the connection is secure, and you can take the pod out and put it back in without needing to line it up carefully.

The colour screen is small but readable. It shows the output wattage, the remaining battery and key coil information, and it switches off after a short period of inactivity to save power. The button layout is simple: one firing button and a pair of adjustment keys. Most people work out the controls inside five minutes without opening the manual, although it is worth reading the instructions once to learn the lock and unlock shortcuts, which are easy to trigger accidentally if you carry the device in a pocket with keys.

Where SMOK deserves some credit is in the practical details. The USB-C port sits on the bottom of the device and does not interfere with the pod. The finish is hard-wearing enough that a few weeks of ordinary pocket carry will not strip it, though the paint around the corners will show wear eventually, as it does on any metal-bodied device. The device is built to cope with everyday knocks, but treat any water resistance claims as meaning splash and dust protection, not something you can drop in a sink. Liquid, fluff and moisture getting into the electronics is the most common reason a kit stops working, so keep the device dry and wipe condensation from the contacts when you change pods.

As for the seven variants listed on the page, they differ in finish and colour rather than in function. If you plan to carry the device with you every day, a darker or textured finish tends to hide wear better than a glossy one. If you want something easy to spot in a bag, a brighter colour is the practical choice. Whichever you choose, a silicone sleeve or a simple lanyard is a cheap way to protect the finish and make it harder to lose.

Battery life and charging

A 3000mAh battery is large for a pod device and is one of the main reasons to choose this kit over a smaller one. To put the figure in context, a typical small starter pod kit has a battery of 400mAh to 1000mAh, so the IPX 80 stores several times more energy. That extra capacity is what lets the device run at much higher power without needing a charge every few hours.

Here is how to estimate real-world use. A 3000mAh cell at a nominal 3.7V stores around 11 watt-hours of energy. Allowing for losses in the electronics and the heat generated during use, you can reasonably count on about 9 watt-hours reaching the coil. At 25W, a three-second puff uses around 75 joules, which works out to somewhere around 400 puffs per charge. At 40W the same puff uses about 120 joules, giving roughly 250 to 280 puffs. At 60W it drops to something nearer 180 puffs. These are rough calculations, not lab measurements, but they are a useful guide when deciding what wattage to run.

Put differently, at moderate settings a full charge will carry most people through a day and often into a second, and one charge will usually cover at least one full 2ml pod. If you run the device at the top of its range all day, expect to charge it overnight and possibly top it up in the afternoon.

Charging is via the USB-C port. Use a decent quality charger and a proper cable, preferably the one supplied or another from a reputable brand. A 2A wall charger is a sensible choice and will take the device from flat to full in roughly one and a half to two hours. Slower chargers will work but take longer. Avoid cheap unbranded adapters because poor-quality chargers are a common source of battery problems. Do not charge the device under a pillow or on a soft surface, and do not leave it charging unattended for long periods on a regular basis.

A few simple habits will help the battery last. Avoid leaving the device in a hot car or in direct sun. Do not run it to completely flat as a regular routine. Keep the contacts on the pod and device clean and dry. The battery is built in and not designed to be replaced by the user, so a well-treated cell should provide a couple of years of regular use before capacity noticeably falls off.

When the device finally reaches the end of its life, do not put it in the household bin. It contains a lithium-ion battery, which is a fire risk in refuse lorries and recycling plants. See the end of the guide for the disposal and recycling options available in the UK.

Coils and pod system

The coil is the part that actually heats the e-liquid, and the pod system used here is built around replaceable coils from the SMOK RPM 2 family. That means you buy the device once and then replace only the coil when it wears out, which costs far less than replacing a sealed pod or a whole disposable.

The coils come in a few types, and the choice affects both the feel of the vape and the correct wattage:

• Low-resistance mesh coils (around 0.16 ohms): designed for direct-to-lung vaping, with an open draw and large vapour production. They want more power, typically in the 40W to 65W range, and work well with high-VG liquids and lower nicotine strengths.
• Mid-resistance meshed coils (around 0.23 ohms): a middle ground that gives a slightly tighter draw and lower e-liquid consumption than the lowest-resistance coil, usually used somewhere between 30W and 50W.
• Higher-resistance coils (around 0.6 ohms): designed for a restricted, mouth-to-lung draw similar to a cigarette. They work at much lower wattage, in the region of 15W to 30W, and suit nicotine salt and 50/50 liquids.

Always check the recommended wattage printed on the coil itself, and treat it as the range to stay inside. The resistance numbers above are typical values for coils in this family, so confirm the exact figures on the coil you have, since batches and packaging can differ.

Coil life depends on your wattage, your e-liquid and how often you chain-vape. A reasonable expectation is somewhere between one and three weeks of regular use per coil, which means roughly five to fifteen 2ml pods. Heavily sweetened liquids shorten that. Signs that a coil needs changing include a burnt or flat taste even with a fresh fill, a gurgling noise, reduced vapour and a drop in flavour intensity that does not recover when you change liquid.

To prime a new coil, insert it into the pod, then drip a few drops of e-liquid directly onto the cotton through the side holes where the liquid flows in. Fill the pod, let it stand for five minutes so the cotton fully saturates, and take a few gentle draws without pressing the firing button. Skipping priming is the most common reason a brand new coil tastes burnt on the first draw, and it can ruin the coil permanently.

Fill the pod to just below the maximum line rather than right to the brim. Overfilling pushes liquid into the airflow channel and causes leaks, and it also means you are carrying more e-liquid in the pocket than you need. The 2ml capacity is the UK legal limit for refillable tanks and pods, so every UK-market pod is the same size regardless of brand.

Choosing a nicotine strength under UK rules

In the UK, nicotine-containing e-liquid is capped at 20mg/ml, and refill bottles are capped at 10ml. That 20mg ceiling applies to all nicotine e-liquids, whether they are sold as freebase liquids, nicotine salts or inside pre-filled products, and it is the same limit that applies to disposable and pod products. You will therefore never find a legal UK e-liquid stronger than 20mg/ml, and it is worth being wary of anyone offering something different.

The right strength for you depends mainly on how much you smoked before, how powerful a setup you use, and whether you use freebase or salt nicotine. The IPX 80 is unusual because it can cover both ends, so here is a practical guide:

• Low-resistance mesh coil at 40W to 65W (direct-to-lung): this style delivers a lot of vapour per puff, which means a lot of nicotine per puff. Most people use freebase e-liquid at 3mg/ml to 6mg/ml, with 70VG or max VG bases. Higher strengths at high power can feel harsh and sit heavily in the chest.
• Mid-resistance coil at 30W to 45W: a freebase liquid at 6mg/ml to 12mg/ml, or a nicotine salt at 5mg/ml to 10mg/ml, is a typical starting range.
• Higher-resistance coil at 15W to 30W (mouth-to-lung): nicotine salts at 10mg/ml to 20mg/ml are a common choice, as they are smooth at low power. Freebase at 12mg/ml to 18mg/ml is also used by people who like a sharper throat hit.

A frequent mistake is combining a high-strength nicotine salt with a high-wattage low-resistance coil. Because the device is producing a large amount of vapour, you can easily take in far more nicotine than you intended, and the result is dizziness, nausea and a racing heart. If that happens, put the device down, sit quietly with a drink of water, and choose a lower strength next time. Nicotine salts at 20mg/ml are really designed for low-power mouth-to-lung devices.

If you are trying to stop smoking, the usual advice from NHS stop-smoking services is to start at a strength that satisfies your cravings so that you do not slip back to cigarettes, and then reduce gradually as you become comfortable. Heavy smokers, for example those on 20 cigarettes a day, often begin at 12mg/ml to 20mg/ml on a low-power setup, while lighter smokers do well on 6mg/ml upwards. If you are unsure, start a step lower than you think you need, because it is easy to increase and unpleasant to overdo.

Remember that nicotine is addictive, and e-liquid should never be used by non-smokers, under-18s, or people who are pregnant without taking proper advice. Keep bottles and pods locked away from children and pets.

Who the SMOK IPX 80 suits, and who should skip it

No device suits everybody. Here is an honest summary of who gets the most out of this kit and who is likely to be happier with something else.

It is a good fit for:

• Smokers who want a cigarette alternative with some headroom. The wattage range lets you start at a low, cigarette-like setting and move up if your preferences change.
• Vapers stepping up from a starter pod. If your current kit feels underpowered, the extra wattage and bigger battery are a sensible next step without moving to a full mod.
• People who like to adjust things. If you enjoy tweaking power and coils to dial in a flavour, the IPX 80 gives you that control in a pocket-sized body.
• Anyone leaving disposables behind. A refillable device costs less to run over time and creates far less waste than repeated disposable purchases.

You may want to skip it if:

• You want a completely no-fuss, no-maintenance device. A refillable kit needs filling, charging and the occasional coil change. If you want to press a button and never think about it, a simple draw-activated closed pod kit may suit you better.
• You want the smallest possible device. The IPX 80 is compact for its power, but it is bigger than the slim pod kits that fit in a coin pocket.
• You only ever want a very light, low-power vape. If you will never go above 15W, you are paying for power and battery capacity you will not use.
• You are a non-smoker. Vaping is not recommended for people who do not already smoke or use nicotine, and the product is for adults only.
• You want to use your own coils and rebuild. This is a pre-built coil system, not a rebuildable one.

Also think about your own habits. People who vape in long sessions and fill up often will appreciate the larger battery. People who vape in short bursts through the day and prefer to charge only occasionally may find the device is more than they need. If you travel a lot, remember that e-liquid leaks can happen when cabin pressure changes on a flight, so empty the pod or keep the device in a sealed bag.

How to fill, set up and use the kit

Setting up the kit takes a few minutes. Follow these steps for a clean start, and keep the manual to hand for any button combinations specific to your version.

• Charge first. Plug the device into a USB-C charger and let it charge fully before first use. A full battery avoids low-power quirks while the coil is settling in.
• Prepare the coil. Remove the new coil from its packaging and fit it into the pod. Put a few drops of e-liquid straight onto the cotton through the intake holes on the side of the coil.
• Fill the pod. Open the fill port, which is protected by a silicone bung, and fill slowly with the bottle tip angled against the wall of the pod so air can escape. Stop at the maximum line and close the bung firmly. Check the port is fully sealed, as an open or half-closed bung is the most common cause of leaks.
• Wait. Leave the filled pod standing upright for about five minutes so the cotton soaks fully.
• Insert the pod. Push the pod into the device until it sits flush. Check for the connection on the screen.
• Switch on. Press the firing button quickly several times, usually five, to turn the device on. Use the same sequence to switch it off. Consult the manual for the exact lock and unlock shortcut for your version.
• Set the power. Use the adjustment keys to select a wattage in the range printed on the coil. Start at the lower end.
• Take your first draws. Press and hold the firing button while inhaling slowly. For a direct-to-lung coil, draw gently and steadily over two to four seconds. For a tighter coil, draw slowly into the mouth first and then inhale.

For airflow, adjust the control to suit your coil. Open it up for low-resistance coils, as they need the extra air to stay cool and produce good vapour, and close it down a little for a tighter draw. Check the position of the airflow control on your version since it can differ between pods.

For maintenance, wipe the contacts on the pod and device with a dry cloth or cotton bud every few days, rinse the pod under lukewarm water when you change flavour or coil and let it dry fully, and keep the device out of damp pockets. Never use the device with a cracked pod, as a damaged pod can leak into the electronics. When the screen shows a low battery warning, charge it rather than pushing on with the last few puffs, which are the ones most likely to give a weak or burnt hit.

Troubleshooting common problems

Most problems with refillable pod kits come from a short list of causes, and nearly all can be fixed at home. Here are the ones we see most often.

• Burnt or harsh taste. Usually a dry coil or one that is worn out. Check the pod is topped up, prime the coil properly, lower the wattage and give the cotton time to resaturate between draws. If it persists after a fresh fill and a rest, replace the coil.
• Leaking. Common causes are overfilling, a loose fill bung, a cracked pod, a poorly seated coil or temperature and pressure changes. Empty and dry the pod, check for cracks, reseat the coil firmly, refill to just under the line and close the bung until it is seated all round. Keep the device upright when not in use.
• Gurgling or spitting. Condensation or excess liquid in the airflow path. Blow gently through the mouthpiece, wipe the inside, and avoid overfilling.
• No vapour or weak vapour. The pod may be empty, the coil may be flooded or dry, or the wattage may be too low for the coil. Check the liquid level, remove and clean the pod contacts, and increase the power slightly.
• Check atomizer or no atomizer message. The device cannot read the coil. Remove the pod and wipe the metal contacts on both the pod and the device with a dry cloth, then reseat the pod. If the message continues, try another coil, as a faulty coil is a possible cause.
• Short circuit message. The device has detected a fault in the coil or a wet connection. Clean and dry the contacts, change the coil if needed, and do not keep pressing the button.
• Device will not turn on. Charge it for at least 30 minutes, since a flat battery can take a moment to respond. Try a different cable and charger. If it remains unresponsive after a proper charge, contact us for warranty support.
• Device keeps locking or firing by itself. Check the lock settings and avoid carrying it with keys or coins in the same pocket. If it auto-fires, stop using it, remove the pod, and get in touch.
• Hot device or hot charger. A mild warmth during use or charging is normal, but if the device becomes uncomfortably hot, stop using it, unplug it, and do not use it again until it has been checked.

If you have tried the steps above and the problem is still there, keep the packaging and your order number and contact us. We can talk you through further checks and, if the unit is faulty, explain the options for repair, replacement or refund under your statutory rights and the manufacturer's warranty.

Value for money and how it compares with similar kits

The upfront price of a kit like this is higher than a pack of disposables, but the comparison changes once you count running costs. The main ongoing expenses are e-liquid, coils and a little electricity for charging. Electricity is negligible: charging a 3000mAh battery uses a fraction of a penny's worth of power.

Here is a sensible way to work out your costs. A 10ml bottle of e-liquid fills a 2ml pod five times, so one bottle gives roughly 1,250 to 2,250 puffs at moderate power based on the earlier estimate of 250 to 450 puffs per pod. A coil costing a few pounds in a multi-pack typically lasts for a week or two, so you can budget for a coil for roughly every fifteen pods or so. Adding these together, a regular vaper typically spends noticeably less per week than they would on disposables that offer the same number of puffs, and the cost gap widens the longer you use the same device.

The environmental argument is just as strong. A disposable vape is thrown away after a few hundred puffs, taking its battery and plastic with it. A refillable kit keeps the battery and pod in service for a long time and only the coil is discarded regularly. Since the UK banned the sale of single-use vapes, this kind of device is the mainstream choice for anyone who wants to carry on vaping legally.

The value of the kit is also bound up with how long it lasts. A well-maintained device with a 3000mAh cell, a metal frame and a replaceable coil system can run for a year or longer of regular use. The parts most likely to wear out first are the pod, which can crack or loosen over time, and the coil. Spare pods are inexpensive, so the cost of keeping the kit going is low. We suggest buying a spare coil pack when you order so you are never caught out, and a spare pod if you swap flavours often.

There are, of course, cheaper kits. Basic pods under half the price exist, and if you only need a low-power vape they may be enough. The case for the IPX 80 is that you are paying for headroom: the extra power, battery and flexibility mean you are less likely to outgrow it. If you already know you want a simple small pod and nothing more, cheaper options will do the job, and it is better to buy what you will actually use.

Here is a fair look at how the SMOK IPX 80 compares with devices a buyer might also consider. We have kept the comparisons general rather than quoting specifications for other brands that may have changed.

Vaporesso GTX Go 80. This is the closest rival in concept: a pocket-sized, 80W-class pod mod with a battery in the same capacity range and a mesh coil system. The two are similar in what they deliver, so the decision often comes down to ergonomics, the look and feel of the device, coil availability and price. If you already own Vaporesso coils or prefer their menu, that is a reasonable reason to choose that one, and the same logic applies if you already own SMOK RPM 2 coils.

Voopoo Drag X and similar single-cell devices. These offer comparable power but use a removable external battery and are physically larger. They suit people who like to carry a spare battery and swap it when one runs flat, but they are bulkier and the extra step of handling cells is not for everyone. A built-in battery, as on the IPX 80, is simpler and avoids the need to buy and store separate cells.

Uwell Caliburn series. These are small, low-power, tight-draw pods with much smaller batteries. They are easier to pocket and ideal for cigarette-style vaping with nicotine salts, but they do not have the power or battery life for a direct-to-lung style. If your habit is a quiet mouth-to-lung vape and you value size, a Caliburn-type device can be the more sensible purchase. If you want to be able to change your style, the IPX 80 gives you more room.

Oxva Xlim series. These are popular for their adjustable airflow and good flavour in a slim form. They sit at lower power than the IPX 80 and rely on smaller batteries, so they suit mouth-to-lung vapers who want something compact more than those chasing vapour volume.

Disposable vapes. Disposables are no longer sold legally in the UK, but some people still compare them out of habit. A refillable kit wins on running cost, waste and choice of liquid, while a disposable would only have won on convenience.

In short, the IPX 80 is a competent, practical choice for people who want a pocketable device with real power and a decent battery, backed by a coil system that is easy to source in the UK. It is not the only way to get that, and the alternatives above are reasonable choices if you already use their coils or prefer their design. Pick on the style of vaping you want, the coils you can easily buy, and the budget you have.

Finally, a note on safe disposal. When your pods, coils or the whole device reach the end of their life, do not place them in household waste or normal recycling. The battery is a fire risk. Take old devices, empty pods and used coils to a recycling drop-off point such as your local household waste recycling centre, or hand them back to a vape retailer that offers take-back, as most UK vape shops are required to do. Never try to open the device or remove the battery yourself.