Voopoo TPP Pod Tank Gun Metal

Overview

The Voopoo TPP Pod Tank Gun Metal by Voopoo in Gun Metal at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Voopoo TPP Pod Tank overview: what it is and what it is not

The Voopoo TPP Pod Tank is a refillable replacement pod for Voopoo's TPP-series pod kits. It is an accessory rather than a complete vape: it has no battery of its own and it does not arrive filled with e-liquid. What you get is the tank half of a sub-ohm style pod system, which means a transparent refillable reservoir, a side-fill port, an airflow-controlled mouthpiece and a seat that accepts a Voopoo TPP mesh coil. Click it onto a compatible device, fill it with the nicotine e-liquid of your choice, give the coil time to saturate, and you are ready to vape.

People usually buy this item for one of three reasons. The first is a straightforward replacement: a pod has cracked in a bag, a seal has worn after months of refilling, or an old pod has started to leak and no amount of cleaning will fix it. The second is a spare, so that you can keep one pod filled with a fruit flavour and another with menthol or tobacco without flushing and re-priming every time you change your mind. The third is an add-on for someone who has just bought a compatible Drag-series kit and wants a second pod in the drawer.

A few facts are worth stating plainly before the detail starts:

• It is reusable hardware. Unlike a single-use disposable, you keep the pod and replace only the coil when the flavour fades. In Great Britain, single-use disposable vapes have been banned from sale since 1 June 2025, and refillable pod systems like this one are part of how reusable vaping carries on.
• It contains no nicotine until you add it. Whatever e-liquid you choose must sit within UK limits: a maximum of 20mg/ml nicotine strength, in bottles of no more than 10ml.
• It is for adults only. You must be 18 or over to buy and use vaping products in the UK, and age checks may apply at checkout and on delivery.
• Compatibility matters. The TPP format is specific to certain Voopoo devices, so confirm that your device takes TPP pods before you order.

Nicotine is addictive, and vaping is not risk-free. It is intended for adult smokers and existing vapers, not for people who do not already use nicotine. With that said, the rest of this guide covers how the TPP Pod Tank performs, how it tastes, how it is built, what powers it, how to set it up, what goes wrong and how it compares with the alternatives, so you can decide whether it suits the way you vape.

Specifications, compatibility and what to check before you order

Because this is an accessory, the specification that matters most is not a number on a data sheet but whether the pod fits the device you already own. The Voopoo TPP Pod Tank is built around Voopoo's TPP coil format and is intended for Voopoo kits that accept TPP pods. It will not seat properly in pod systems from other brands, and it will not fit Voopoo devices that use a different pod standard, such as the PnP-style pods used by other Voopoo kits. If you are unsure, match the pod and coil name printed on your existing pod against the TPP label on the listing before ordering.

The summary below is a practical guide. The product listing and the packaging are the final word on exact numbers.

• Product type: refillable replacement pod tank. Hardware only, with no battery and no e-liquid included.
• Tank capacity: 2ml for the UK market. Under the Tobacco and Related Products Regulations 2016, refillable tanks sold in the UK are limited to 2ml, so pods sold here carry the smaller capacity even where the same format is sold in larger sizes elsewhere.
• Coil format: Voopoo TPP-series mesh coils. These are sub-ohm designs, and the wattage range each coil is built for is printed on the coil itself.
• Filling method: side-fill port sealed with a silicone cover, so you do not need to remove the pod from the device to refill.
• Airflow: adjustable, so you can move between a tighter draw and a more open one to suit your style.
• Variants on this listing: four. Use the selector on the product page and match the option to what you need, whether that is a particular colour or a particular pod and coil combination.
• Age restriction: 18 and over only.

It is worth reading the variant description carefully. On some pod accessories a coil is already fitted in the pod, and on others the pod is supplied empty with the coil sold separately. If you are buying this as a straight swap for a worn-out pod, the simplest approach is to order a spare TPP coil in the same order, so that a new pod never sits unused waiting for a coil to arrive.

Keep the packaging details and your order confirmation. If a component turns out to be faulty, having the batch information and order number to hand makes any support conversation faster. If you are still not sure about compatibility, ask before you buy rather than after: a pod that is opened, filled and tested with liquid is much harder to return than one that is still sealed.

Performance and vapour delivery

A pod tank has no puff count in the way a disposable does, because how much you vape from it depends on how often you refill it. What matters is how the tank behaves at the power levels it is designed for and how quickly it uses liquid while doing so. The TPP format is a sub-ohm mesh design, so the character is closer to a compact sub-ohm tank than to a low-power nicotine-salt pod. Expect a warm, dense inhale and a noticeable amount of vapour, with the detail depending on the coil you fit and the wattage you set on the device.

Mesh coils reach working temperature quickly, so there is very little delay between pressing the fire button and feeling vapour. That matters in everyday use: a coil that ramps up slowly tends to have you holding the button longer, which wastes both battery and liquid. Throat feel is smooth when the coil is properly primed and the power sits inside the coil's printed range. It becomes noticeably harsher if you push beyond that range or if the cotton is only part saturated.

Liquid consumption is the part first-time sub-ohm buyers underestimate. Here is a rough guide rather than a laboratory figure:

• At typical sub-ohm settings, a 2ml fill commonly lasts somewhere in the region of 100 to 200 puffs, depending on puff length, wattage and the VG ratio of the liquid.
• A day of steady use can therefore mean several refills, whereas the same person might refill a low-power MTL pod only once a day.
• Setting the wattage towards the lower end of the coil's range stretches each fill and often improves flavour clarity, at the cost of some vapour volume.
• Opening the airflow cools the vapour and increases volume. Closing it down gives a more restricted draw with a stronger focus on flavour.

Consistency through a fill is where a well-made mesh coil earns its place. The first puff after refilling and the last puff before the next refill should feel broadly similar as long as the wicking keeps up. If the final quarter of the tank starts to taste hotter or thinner, the liquid level may be dropping close to the wicking ports. A good habit is to top up when the window shows about a quarter left rather than running it dry, which is kinder to the coil and avoids the dry-hit experience entirely.

Finally, remember that performance is a partnership. The pod and coil decide how efficiently liquid is turned into vapour, but the host device decides how cleanly power is delivered. A pod tank on a device with a depleted battery will feel flat even if the coil is brand new, so check the battery level before blaming the coil.

Flavour profile and how mesh coils shape taste

The pod itself has no flavour of its own. What it does is determine how faithfully the flavour of your e-liquid reaches your mouth, and here the mesh coil is the key part. Instead of a single wire, a mesh coil uses a thin sheet of mesh with a much larger surface area in contact with the cotton. That spreads heat more evenly, which tends to mean fewer hot spots, less of the scorched edge that round wires can produce, and a rounder, more complete flavour across the whole puff.

In general terms, mesh pods of this type suit certain styles of e-liquid especially well:

• Fruit flavours: layered blends of berry, citrus or tropical notes tend to keep their top notes and their sweeter base, rather than collapsing into a single sweet note.
• Menthol and ice blends: the cooling effect comes through cleanly, and a more open airflow softens it for people who find strong menthol sharp.
• Desserts and bakery flavours: these benefit from a slightly warmer setting, though they also leave more residue, which is covered in the maintenance section below.
• Tobacco and drinks flavours: subtler profiles are easier to appreciate on a mesh coil at moderate power, because a clean coil does not mask delicate notes with heat.

Keep in mind that flavour is not only about the coil. The ratio of PG to VG in your liquid changes how it tastes and feels. PG carries flavour more crisply and gives a stronger throat hit, while VG makes the vapour thicker and a little sweeter. For a sub-ohm mesh pod, a balanced or VG-leaning liquid in the region of 50/50 to 70/30 is a sensible place to start, and you can adjust from there.

If you like to rotate flavours, this accessory makes it simple. Buying a second pod means you can leave one dedicated to a sweet or dessert profile and the other to menthol or tobacco, and you avoid ghosting, which is where the last flavour you used lingers in the cotton and clashes with the next. Using a single pod across wildly different flavours can leave a muddy aftertaste, even after rinsing, because the cotton holds on to dyes and sweeteners.

One honest caveat: no coil can rescue a poor liquid, and a very sweet liquid will always dull a coil faster than a plain one. If the flavour starts to fade after a week or two, try changing the coil before assuming the pod is at fault.

Design and build quality

The Voopoo TPP Pod Tank follows a familiar layout for a refillable pod: a clear reservoir so that you can see how much liquid is left, a mouthpiece at the top, a silicone-sealed fill port on the side and a coil seat at the base where the pod meets the device. The clear body is a practical choice rather than a styling one, since seeing the liquid level is the simplest way to avoid running the coil dry.

Here are the aspects of the build worth paying attention to when it arrives:

• Seals and bungs: the silicone fill cover and the seals around the coil should sit snugly with no gaps or twists. A twisted seal is the most common cause of a leak on day one, so check them before you fill.
• Mouthpiece fit: the mouthpiece should feel firmly attached with no rattle, and the opening should be comfortable against the lips.
• Airflow control: the adjustable airflow should move with a smooth, consistent resistance. If it is too loose it can drift in a pocket, and if it is too stiff it may be hard to change one-handed.
• Pod-to-device fit: the pod should seat with a clear click or firm resistance and sit flush against the device body, with no wobble.
• Contacts: the connection points at the base should be clean and dry. A single smear of e-liquid there can cause an error message on the device.

On durability, treat the pod as a consumable component with a reasonable but not unlimited life. The transparent plastic is light and shatter-resistant compared with glass, but it can scratch and, with repeated cleaning in the wrong way, can cloud or develop fine cracks. Some clear plastics are sensitive to alcohol and strong solvents, so avoid cleaning the pod with alcohol-based products, and stick to warm water and a gentle wipe instead. Always let the pod dry fully before refilling.

Everyday handling matters too. Pods spend a lot of time in pockets and bags, and pressure on the fill cover or a bump on the mouthpiece is how most leaks start. A pocket with keys in it is the usual culprit. If you carry the device around all day, consider a small case, and carry it upright where possible. Most owners find that a pod lasts for many coil changes if looked after, but you should plan to replace it once the seals harden, the plastic becomes cloudy or any crack appears, because these faults cannot be repaired reliably.

In short, the design is functional and conventional. It does what it should without gimmicks, and the usual fit-and-finish checks on arrival are enough to catch any obvious faults.

Device power, battery and charging

The pod tank has no battery. Everything that produces heat and vapour is powered by the device you clip it onto, so the battery section of this guide is really about how your host device and the pod work together. Battery size is usually quoted in mAh, and the number only becomes meaningful when you connect it to the power you are using.

Here is a worked example with deliberately round numbers. A 3000mAh lithium cell at a nominal 3.7V holds about 11.1 watt-hours, which is roughly 40,000 joules of energy. A 3-second puff at 70W uses about 210 joules. Divide one by the other and you get around 190 puffs in theory. Real-world losses in the electronics and the way the battery behaves under load mean you should expect fewer, so call it somewhere in the region of 150 puffs per full charge at that power. Drop to 50W and the same battery goes noticeably further. Your own device may have a larger or smaller battery, so treat this as a method for estimating rather than a promise.

That calculation also shows how battery and liquid line up. With a 2ml fill giving roughly 100 to 200 puffs, one full charge of a battery in this class often gets through one to two fills. If your device runs flat long before the tank is empty, the wattage is probably higher than you need.

Some practical charging habits are worth following:

• Use the USB-C cable supplied with your device or a reputable replacement, and a standard 5V charger from a known brand rather than an unmarked adaptor.
• Do not charge on soft furnishings such as a bed or sofa, and do not leave a device charging unattended overnight.
• Unplug it once it is full, and stop using any device with a swollen, dented or hot-to-the-touch battery.
• Keep the pod contacts and the device connector dry. Moisture and e-liquid residue interfere with the electrical connection.
• If your device uses removable cells, use only the cell type the manufacturer specifies, keep spares in a case rather than loose in a pocket, and never mix old and new cells.

When a battery eventually reaches the end of its life, do not put it in the general waste or the household recycling bin, because lithium cells can cause fires in collection vehicles and waste sites. Take vape devices and loose cells to a battery or small electricals drop-off point, which you can usually find at supermarkets, household waste recycling centres and many retailers that sell vaping or electrical goods.

Coil and mesh technology in the TPP format

The TPP name refers to Voopoo's pod-and-coil format, and the coils in this family are sub-ohm mesh designs. Each coil has a resistance, usually somewhere in the sub-ohm range, and a recommended wattage window printed on its side. These two numbers are the most useful information you will ever read about a coil, because they tell you where it will perform well and where it will not.

Why mesh rather than a simple round wire? There are several practical reasons:

• Surface area: a mesh sheet touches far more cotton than a coiled wire, so liquid is heated across a wider area at once.
• Even heating: broader contact means fewer hot spots and less chance of burning a tiny patch of cotton.
• Fast ramp-up: the coil reaches vaping temperature quickly, which saves energy and cuts the lag between pressing the button and getting vapour.
• Consistent flavour: because heating is more even, the flavour stays more stable across a fill.

There are trade-offs too. Mesh coils wick a lot of liquid, so they use more of it than a low-power coil. They also tend to be less forgiving of being run dry, because the large surface area scorches quickly once the cotton stops being fed. And, like any coil, they have a finite life. Most vapers change a coil every one to three weeks, depending on how often they vape and how sweet the liquid is. Heavier use and dessert-style liquids shorten that window, while lighter use and cleaner flavours extend it.

The signs of a coil reaching the end are simple to spot:

• Flavour that is flat or has a faintly burnt edge even after the tank is freshly filled.
• Gurgling or spitting that did not occur when the coil was new.
• Noticeably thinner vapour at the same wattage.
• A darkened, sticky or crusty look on the visible part of the cotton.

Priming is the single biggest factor in how long a new coil survives. Before the first puff, drop a few drops of liquid directly onto the exposed cotton through the wicking holes, fill the tank, and wait a good five to ten minutes. Then take the first few puffs at the low end of the printed wattage range, and only increase once you can taste smooth vapour. Skipping this step is the usual reason a brand-new coil tastes burnt on its first day.

Choosing e-liquid and nicotine strength

Choosing the right e-liquid matters as much as choosing the right pod. In the UK, nicotine e-liquid is limited to 20mg/ml and bottles to 10ml, so everything you can legally buy off the shelf sits inside those boundaries. Within them, the right strength for a sub-ohm mesh pod is usually lower than people expect, because the high power and generous vapour volume deliver nicotine quickly.

The following points give a sensible starting framework. They are general guidance, not medical advice:

• 0mg: nicotine-free liquid is fully compatible with the pod and is a good option for people who have reduced their nicotine use and enjoy vaping for flavour.
• 3mg/ml: a common starting point for ex-smokers who are comfortable with large clouds and want a gentle throat hit.
• 6mg/ml: a frequent choice for former heavier smokers who find 3mg doesn't satisfy them in this style of device.
• 12mg/ml and above: usually too harsh in a high-power sub-ohm setup. If you need this level, a lower-power MTL device is usually a better match than this kind of pod.

Choose a VG-leaning liquid. A ratio such as 70VG/30PG works well in mesh pods, with 60/40 and 50/50 also giving good results if you prefer a more pronounced throat hit and stronger flavour. Very thick liquids at 80VG or higher can be slow to wick, so if you use them, allow extra priming time and pay attention to any signs of dry hits.

What about nicotine salts? Salt liquids were designed for low-power devices and are usually sold in the 10mg and 20mg range. In a high-power sub-ohm pod, a 20mg salt is likely to be uncomfortably strong and will deliver far more nicotine per puff than the strength suggests. Some vapers do use lower-strength salts in the region of 5mg to 10mg in sub-ohm hardware, and if you try that, start at the low end of the wattage range and take small puffs until you know how it feels.

Shortfills are also popular with sub-ohm users because they give a large volume of liquid at a lower price per millilitre. A shortfill is sold without nicotine, with space left in the bottle so you can add a nicotine shot. As an example, adding one 10ml shot at 18mg/ml to a 50ml shortfill makes a 60ml bottle at about 3mg/ml. The finished liquid you vape from still has to be mixed carefully, so shake it well and let it rest for a few hours.

If you are trying to cut down or stop nicotine entirely, your local stop smoking service or pharmacist can offer personal advice and support.

Who the Voopoo TPP Pod Tank is for

The TPP Pod Tank is aimed at a fairly specific group, and it is better to be clear about that than to pretend it suits everyone. It fits best with people who already own, or are about to buy, a Voopoo device that takes TPP pods and who want a spare or a replacement.

It is a sensible purchase if you:

• Own a compatible Voopoo kit and need a replacement for a cracked, leaking or worn pod.
• Want a second pod so you can alternate between two flavour families without mixing them.
• Prefer a warm, vapour-rich draw to the tight, restricted draw of a classic MTL pod.
• Like to refill from your own bottles, choose your own strengths and pay less per millilitre than you would for sealed disposables.
• Want a reusable alternative now that single-use disposables are no longer sold in Great Britain.

It may not be the right choice if you:

• Do not own a compatible device. The pod will not work on its own and will not fit other brands.
• Want the simplest possible vape. A pod tank needs filling, priming and occasional cleaning. If you want to click and go, a closed pod system with pre-filled cartridges is easier.
• Need a high nicotine strength at low power. Heavier smokers who rely on 18mg or 20mg nicotine salts will usually find a dedicated MTL device more satisfying.
• Dislike refilling often. A 2ml tank used with a sub-ohm coil needs topping up several times in a day of regular vaping.
• Do not currently use nicotine. Vaping is for adult smokers and existing vapers, and non-smokers should not start.
• Are under 18. It is illegal to sell vaping products to anyone under 18 in the UK, and illegal for adults to buy them on their behalf.

There is also a middle group worth mentioning: experienced vapers who enjoy the hobby side of things. If you like fine-tuning wattage and airflow, rotating coils and experimenting with different liquids, a pod tank gives you far more room to do so than a closed pod, while remaining much more compact than a traditional tank and mod. Because the hardware is replaceable, you can start with a single pod and add more later as your tastes settle.

If you are not sure where you fit, ask yourself one question: do you want to maintain a small piece of hardware in return for more control over flavour, strength and cost? If the answer is yes, this pod suits you. If the answer is no, it is worth looking at simpler options.

How to fit, fill, prime and use the pod

Setting up the pod properly takes about ten minutes, most of it waiting, and getting it right is what keeps a new coil healthy. Follow these steps in order.

• Step 1, check and unpack. Confirm that the pod and coil are the TPP type for your device. Remove any protective film, caps or plugs, and check that all the seals are in place and flat.
• Step 2, fit the coil. If the coil is not pre-installed, press a fresh TPP coil firmly into the seat until it is fully inserted. A coil that is not fully seated will leak.
• Step 3, prime the coil. Put a few drops of e-liquid straight onto the exposed cotton through the wicking holes, so the cotton is damp before you fill the tank.
• Step 4, fill the tank. Open the side-fill cover, place the nozzle of the bottle against the opening and fill slowly, keeping the liquid level below the maximum line. Do not fill the central chimney, and do not squeeze the bottle hard. Close the cover securely.
• Step 5, wait. Leave the pod upright for five to ten minutes so the cotton can saturate fully. This is the most skipped step and the most important.
• Step 6, attach the pod. Wipe away any liquid from the outside, then click the pod onto the device. Confirm it is seated flush.
• Step 7, set the power. Check the wattage range printed on the coil and start at the lower end. If your device has an auto mode that reads the coil, let it do so.
• Step 8, start gently. Take two or three short puffs with a few seconds between them, then increase the wattage a little at a time until the flavour and warmth suit you.
• Step 9, adjust the airflow. Open the airflow for a cooler, airier draw or close it down for a tighter, more flavour-focused one.

A few habits make daily use smoother. Refill when the level is around a quarter, not when it is empty. Keep the bottle upright when filling to avoid air bubbles. Wipe the mouthpiece with a clean tissue occasionally. And when you are not using the device, store it upright with the mouthpiece pointing up, away from direct heat such as a car dashboard in summer, because warm liquid thins and is more likely to leak.

Remember that the legal bottle limit is 10ml for nicotine liquid, so you will be refilling from small bottles. Keep a spare bottle in your bag if you plan to be out all day, and never refill while the device is firing. Always keep bottles, pods and coils out of the reach of children and pets, because nicotine liquid is harmful if swallowed or if it contacts skin or eyes in quantity.

Troubleshooting and maintenance

Most problems with a pod tank have simple causes. Work through the likely ones before assuming something is broken.

• Leaking from the base or air holes. Check that the coil is fully seated and the seals are flat and undamaged. Overfilling, squeezing the bottle hard, pressure changes on a flight and heat can all push liquid where it should not go. Wipe the pod and refill to a lower level.
• Gurgling or spitting. Condensation has gathered in the airway. Blow gently through the mouthpiece with the pod detached, or dab the airflow channel with a tissue. Very thick, VG-heavy liquid can make this worse.
• Burnt taste. This is usually a dry hit from a coil that was not primed, a tank that ran too low, or a wattage that is too high. Turn the power down, refill and rest. If the taste persists after a few puffs, replace the coil.
• Weak flavour. The coil may be tired, the liquid may be very low in flavour, or the airflow may be too open. Try closing the airflow slightly, and change the coil if it is more than a couple of weeks old.
• No vapour or an error message. Check that the pod is seated, the coil is fully pushed in and the contacts are dry. Wipe the contacts on the pod and device with a dry cotton bud.
• Liquid in the mouth. Too much liquid is reaching the airway. Check the fill level, make sure the seals are seated and open the airflow slightly.
• Hissing or crackling. A small amount of crackle is normal with high-VG liquid, but loud popping usually means the coil is flooded or the cotton is saturated unevenly. Pause for a few minutes and try again.

For regular maintenance, rinse the pod with warm water when you change flavour or coil, dry it thoroughly with a lint-free cloth and let it air dry before refilling. Avoid alcohol, strong detergents and boiling water, since these can damage seals and cloud the plastic. Do not rinse a pod while the coil is installed, because water in the cotton will cause popping and poor flavour for the first few puffs.

When to replace the pod rather than clean it: if you see cracks, cloudiness that does not clear, seals that have stiffened or flattened, or leaks that carry on after a fresh coil and careful refilling, the pod has done its job. Replacing it is safer and more reliable than trying to patch it.

For disposal, treat used coils, pods and devices as small electrical waste rather than general rubbish. Drop-off points for vaping equipment are widely available in the UK, including at household waste recycling centres and many retailers, and many shops that sell vaping products offer take-back schemes. Empty, dry components are easier to process, so remove any remaining liquid first.

Value for money and how it compares

Judging value on a pod tank means looking beyond the price of the pod itself. The pod is a one-off purchase that may last for months, while the real running costs are coils and e-liquid. Coils typically last one to three weeks depending on your use, so over a year the coils will cost more than the pod. Liquid costs vary hugely depending on whether you buy small 10ml bottles or shortfills, and because sub-ohm use is liquid-hungry, a cheaper price per millilitre helps a lot. Check the current price on the listing, because prices change.

Compared with disposables, which are no longer sold in Great Britain, reusable hardware has always been the cheaper route over time, since you are not paying for a battery, a casing and packaging each time. The trade-off is a little more effort in the form of refilling and cleaning.

Here is a fair look at how this pod style compares with the main alternatives:

• Low-power MTL pod systems such as the Vaporesso XROS range, SMOK Novo or Uwell Caliburn. These use less liquid per puff, suit 10mg to 20mg nicotine salts and give a tight, cigarette-like draw. They are simpler and often easier to carry. They deliver less vapour and less pronounced flavour than a mesh sub-ohm pod, so choose these if you want a close step from smoking. Choose a TPP-style pod if you want a bigger, warmer inhale.
• Other sub-ohm pod systems such as Vaporesso GTX, Geekvape Aegis Boost or SMOK RPM. These offer broadly similar performance and the same mesh-coil logic. The key difference is the ecosystem. Each brand's pods and coils are specific to its own devices, so the better option is usually the one that matches the device you already own and the coil range you can easily buy.
• Closed pod kits with pre-filled cartridges. These remove the refilling step, but they cost more per millilitre and give you less choice of liquid.

On the plus side, the TPP Pod Tank offers a standard mesh-coil experience, simple side filling, adjustable airflow, easy replacement and a wide choice of liquids. On the minus side, it only works with Voopoo TPP-compatible devices, the 2ml capacity means frequent refills at sub-ohm power, and the pod is a consumable that will need replacing eventually.

Overall, it offers fair value if you already use a compatible device, because a replacement pod costs far less than a new kit. If you do not own a compatible device, the pod is not a sensible stand-alone purchase, and you should look at complete kits instead. Buying a spare coil with your pod also helps, since it avoids waiting on a second delivery when the first coil wears out.