Vaporesso Vibe SE 2 Pod Kit Leather Pink

Overview

The Vaporesso Vibe SE 2 Pod Kit Leather Pink by Vaporesso in Leather Pink at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Vaporesso Vibe SE 2 Pod Kit overview

The Vaporesso Vibe SE 2 Pod Kit is a compact, refillable pod system from Vaporesso, a manufacturer that has made pod devices, coils and tank hardware for many years and supplies a large share of the UK market. It sits at the accessible end of the range. It is aimed at people who want a small, pocketable device that is simple to run and that you refill with your own e-liquid rather than throw away after a few days of use.

If you have been using disposables, or you smoked until recently and want something straightforward that does not need tinkering, this is the kind of kit the pod format was designed for. There is no tank to dismantle, no coil to prime from scratch with a syringe, and no wattage menu to learn. You fill the pod, close it, charge the battery when it runs low, and use it.

It also fits the way UK rules have moved. Single-use vapes can no longer be sold in the UK, and a refillable kit is the obvious reusable alternative. Instead of buying a new sealed device every few days, you buy the hardware once, then pay only for e-liquid and the occasional replacement pod. Over a few weeks that tends to cost noticeably less than a steady run of disposables, and it produces far less waste.

This page covers what the kit is, how it performs, what to put in it, how to look after it and where it sits against similar devices. We have tried to be straight about the limits as well as the strengths, because a pod kit that suits one person can be the wrong choice for another. Where we give technical figures we explain how to confirm them on the box, since Vaporesso can revise component details between production batches.

• Format: refillable pod kit with replaceable pods
• Intended use: mouth-to-lung vaping, aimed at smokers switching and ex-disposable users
• Fill: top-fill with bottled e-liquid, up to the 2ml UK limit per pod
• Age restriction: 18+ only, in the UK it is illegal to sell nicotine vaping products to anyone under 18

Specifications at a glance

Before going into detail, here is a quick reference. Treat the figures below as the typical specification for a kit in this class, and check the exact numbers printed on the retail box and in the manual that comes with your unit. Where a figure is a UK legal limit rather than a hardware detail, we say so.

• Pod capacity: up to 2ml. In the UK, refillable pods and tanks are capped at 2ml, so this is the ceiling for any legally sold kit.
• E-liquid bottle size: UK law limits nicotine e-liquid bottles to 10ml, so you will be refilling from 10ml bottles. Nicotine-free liquid can be sold in larger bottles.
• Nicotine strength limit: 20mg/ml (2%). This is the same cap that applied to disposable vapes, and it applies to every nicotine e-liquid sold in the UK.
• Battery: built-in rechargeable lithium-ion cell. Kits of this size generally carry a battery in the region of 800 to 1,000mAh, which is enough for a full day for a light to moderate user.
• Charging: USB-C, so any modern phone cable or charger works. No special charger is needed.
• Coil: a replaceable coil built into the pod, with a resistance usually somewhere between 0.6 and 1.2 ohm depending on the pod type fitted.
• Activation: pod kits in this class are normally draw-activated, with a button for switching on and off or cycling modes. Check the manual for your unit.
• Size: small enough to sit in a jeans pocket or a coin pocket without a bulge.
• Variants on this page: ten options are listed in the selector, so choose the one you want before adding to basket. The option labels show exactly what each one is.

One practical point on the variant list. A kit is a piece of hardware, not a flavour, so the choice you make on the product page is about the unit you receive and not about the taste. The taste comes from whichever e-liquid you decide to fill it with, which is covered further down. If you are buying your first kit, it is worth adding a bottle or two of e-liquid to the same order so you can start straight away when it arrives.

Accessories are worth thinking about at the same time. Spare pods are the most useful extra, because a pod is the part that wears out first. A second pod also lets you keep one filled with a different flavour or strength without emptying and rinsing every time.

Performance and vapour delivery

A pod kit at this level is built for a smooth, moderate draw. It is not trying to produce huge clouds, and anyone expecting that should look at a sub-ohm device instead. What you get is a measured amount of vapour per puff, a warm rather than hot inhale, and a throat hit that depends heavily on the nicotine strength you choose.

The performance of any pod kit comes down to three things working together: the battery output, the coil resistance and the e-liquid in the pod. Vaporesso tunes the output to suit the coils it supplies for the kit, which is part of why using the pods designed for this device matters. Fit a pod from a different system and you may get poor contact, leaking or a dry hit.

• Draw feel: a restricted to slightly loose mouth-to-lung draw, similar to drawing on a cigarette or a good-quality disposable. Higher-resistance pods feel tighter, lower-resistance pods feel airier.
• Warm-up: a quick ramp-up, with vapour starting almost as soon as you begin the draw. If there is a noticeable delay, the pod is probably low on liquid or not yet saturated.
• Consistency: output should stay steady across the battery charge until it gets low. A drop in vapour on a half-empty pod usually points to the wicking, not the battery.
• Throat hit: controlled by nicotine strength and base, not the device. A high-PG liquid gives a sharper hit than a high-VG one at the same strength.

On puff count, avoid treating any figure as a promise. A 2ml pod of 10mg or 20mg nicotine salt liquid typically gives a few hundred puffs for many users, but the number swings with how long you draw, how often you vape and which coil is fitted. A heavy user will empty a pod in a day. A light user might make it last two or three. We would rather you plan on refilling once or twice a day at the start and adjust from there.

One thing that is worth knowing about refillable pods compared with disposables is that they do not fade as the battery runs down in the same abrupt way. Disposables often cut off. A rechargeable pod kit usually keeps going until the battery is nearly flat, then stops, and you charge it. That predictability makes it easier to plan a day around it.

If you find the vapour thin, the usual causes are a pod that has not been left to soak after filling, an air-flow setting too closed for the liquid, or a coil that has reached the end of its life. We cover each of these in the troubleshooting section below.

Flavour profile and what to put in the pod

The kit itself has no flavour. What you taste depends on the e-liquid, and this is where a refillable system gives you more choice than a disposable ever can. With the right liquid, the kit can handle anything from a plain menthol to a layered dessert profile. Some general guidance, based on how different liquid families behave in a pod coil of this type, follows.

• Menthol and mint: a cool, clean profile that comes through clearly in a pod coil. Menthol is the usual starting point for people coming off cigarettes, and mint is a gentler option if full menthol feels too sharp.
• Blue raspberry and ice: sweet, bright and a little sharp, with a cooling finish. A very popular profile from the disposable era, and it translates well to a refillable pod.
• Strawberry and watermelon: light fruit that works at most strengths and is easy on the throat at 10mg.
• Mixed berry: a rounder, jammier fruit profile. Pod coils handle these well because the flavour is strong enough to stand out at lower power.
• Peach and passionfruit: softer, more tropical and a bit fragrant, good for people who tire of berry flavours quickly.
• Tobacco: a dry, slightly toasty profile that suits ex-smokers who want something close to what they are used to.
• Vanilla and custard: thicker dessert profiles. These can leave residue on a coil more quickly, so expect to replace the pod somewhat sooner.
• Cola and energy-drink styles: fizzy, citrus-led profiles that suit a moderate-power device like this one.

To get good flavour, match the liquid to the coil. Nicotine salt liquids are designed for low-power pod devices and give a smooth hit at higher strengths. Freebase liquids can also work, but at 3mg to 6mg strengths, which suits a user who wants a light hit and bigger clouds. If you are unsure, start with a nic salt liquid in the 10mg range.

Thick, sweet liquids with a very high VG ratio can wick slowly in a small pod coil. If you notice gurgling or dry hits with a dessert flavour, look for a 50/50 or higher-PG blend rather than a max-VG one. For general use, a 50/50 or 40/60 PG to VG mix is the safest starting point.

Finally, it is sensible to change flavours between pods rather than within one. Residue from the old flavour stays in the coil and can muddy the new one. A second pod is the cleanest way to keep two flavours on the go.

Design and build quality

The Vibe SE 2 follows the familiar compact-pod layout: a slim body, a pod that clicks in at the top, a mouthpiece built into the pod and a charging port at the bottom. The exterior is typically a coated metal or a soft-touch finish, and the colour choices in the variant selector reflect the range of finishes that Vaporesso offers.

Build quality in this class is good for the price. Panel gaps are usually even, the pod seats firmly and the device does not rattle in the hand. A coated finish will show wear on corners if you carry the kit loose in a bag with keys, so a small case or a separate pocket helps keep it looking new.

• Weight and handling: light enough to forget in a pocket, but with enough substance that it does not feel flimsy. It is comfortable for long sessions because the body is slim and the mouthpiece is shaped for the lips.
• Pod fit: the pod connects through magnetic or friction-fit contacts. It should click in without wobble. If it feels loose, remove it and reseat it before assuming a fault.
• Fill port: a silicone bung on the pod covers the fill hole. It needs to be pushed fully home after filling, as a half-closed bung is the most common cause of leaks.
• Indicator light: a small LED on the body gives battery status and warnings, so you do not need a screen.
• Mouthpiece: sits in the pod, so you replace it with each new pod, which is good for hygiene.

The design philosophy is practical. There is no display to crack, no adjustable airflow ring to snag on a pocket lining, and few parts that can come loose. Fewer features mean fewer things that can fail, and that matters in a device you will carry everywhere.

On the downside, a small, sealed body means you cannot replace the battery yourself. When the cell eventually degrades, usually after a year or more of daily charging, the kit reaches the end of its life. For most users this is an acceptable trade for the size and the price, but it is worth being aware of if you want a device you plan to keep for several years.

Care is simple. Wipe the contacts with a dry cotton bud now and then, keep the pod bung clean and avoid leaving the kit in a hot car or direct sun, since heat thins the liquid and promotes leaking.

Battery life and charging

Battery life is the first question most people ask, and the honest answer is that it depends on how much you vape. A built-in battery of the capacity commonly fitted to kits in this class, roughly 800 to 1,000mAh, gets a light to moderate user through a typical day. A heavy user vaping constantly may need a top-up at lunchtime or an evening charge before going out.

The real-world rule of thumb is that one charge covers roughly one to two full 2ml pods of nicotine salt liquid. If you find you are charging more than once a day, it usually means you are drawing for a long time per puff or using a lower-resistance pod that pulls more power.

• Charging port: USB-C. Use the cable supplied or any good-quality phone cable.
• Charging time: generally around an hour or so from flat to full on a standard 5V charger. A higher-wattage fast charger does not make it quicker, because the kit limits the charging current.
• Indicator: the LED usually shows a charging colour and changes or turns off when full. Check the manual for the exact colour code on your unit.
• Pass-through: many compact pod kits will vape while charging, but it is better avoided. It heats the cell and reduces its lifespan.

To get the longest life out of the cell, treat it like a phone battery. Avoid leaving it completely flat for long periods, do not leave it plugged in for days, and keep it out of high heat. A cell that is cycled between roughly 20% and 90% will last noticeably longer than one that is repeatedly run to zero.

Safety matters with lithium-ion devices. Use a reputable charger, not a damaged cable, and do not charge unattended overnight on a soft surface such as a bed or sofa. If the kit becomes unusually hot, swells or smells of burning, stop using it and take it to a recycling point as described below.

When the kit finally reaches the end of its life, do not put it in household bin or normal recycling. Vapes and their batteries are covered by waste electrical rules in the UK. Retailers that sell vaping products are required to take back old devices, and most local council recycling centres also have a small electrical items container. Remove the pod and empty any remaining liquid first where you can, and drop the device off at one of these points.

Coil and pod technology

The coil is the heating element that turns e-liquid into vapour, and in a pod kit it is built into the pod itself. This is a deliberate design choice. Because the coil and pod are replaced together, there is no separate coil-changing process, and you never have to deal with a loose coil head or an incorrectly seated one.

Vaporesso's pods for kits like this use either a mesh coil or a ceramic-style coil, depending on the specific pod. The two have different characters.

• Mesh coils: a flat mesh of resistance wire gives a larger heating surface, which tends to produce more flavour and quicker warm-up. They respond well to a wide range of liquids and are the more common choice on current devices.
• Ceramic-style coils: a porous ceramic core wicks the liquid evenly and resists burning. They are valued for consistency and a clean, neutral taste, and they are forgiving with sweeter liquids.

Resistance affects the feel. A lower-resistance pod, around 0.6 to 0.8 ohm, draws more power, gives a warmer vapour and a more open draw, and uses more battery. A higher-resistance pod, around 1.0 to 1.2 ohm, gives a tighter draw, cooler vapour and longer battery life, and it is generally a better match for high-strength nicotine salts.

Coil life is the figure that matters for running cost. A pod coil typically lasts anywhere from one to two weeks of regular use, though this varies. Sweet, thick or heavily flavoured liquids shorten it, and light, thin liquids extend it. You will know it is nearing the end when the flavour turns flat or slightly burnt, vapour thins out or the draw becomes harsh.

To get the most from each pod, prime it properly. After filling, leave the pod standing for about five minutes so the liquid soaks into the cotton and the coil. Then take two or three gentle puffs, without pressing the button, before the first real draw. Skipping this is the main cause of dry hits and early burnt-coil taste.

• Do not fill above the maximum line, since overfilling floods the air path.
• Do not let the pod run completely dry.
• Do not chain-vape without gaps, as the cotton cannot re-wick fast enough.

Use Vaporesso pods that are made for this kit. Third-party pods that appear to fit sometimes have slightly different contact dimensions, and a poor connection can cause error lights or inconsistent output.

Choosing a nicotine strength

Nicotine strength is the decision that has the biggest effect on whether a switch from smoking works. In the UK, nicotine e-liquid is capped at 20mg/ml, which is the same limit that applied to disposable vapes. Within that limit you have a range to pick from, and the sensible choice depends on how much and how often you smoke or vape now.

• 0mg: nicotine-free. For people who have finished with nicotine entirely or who vape for the habit and taste alone.
• 3mg to 6mg freebase: a very light hit. Suits former smokers who have already stepped down and vape a lot of low-strength liquid in larger-vapour devices. In a pod kit like this, it will feel thin.
• 10mg nicotine salt: a mid-range choice. A reasonable starting point for light smokers, up to around 10 cigarettes a day, and for those who find 20mg harsh.
• 20mg nicotine salt: the highest strength allowed. Often chosen by people smoking 15 or more a day, and the closest to the hit of a cigarette. It can be strong on the throat, so it is easier to use if you take short, gentle draws.

Nicotine salts are the format most people choose for pod kits. They use an acid in the liquid to lower the pH, so the nicotine feels smoother at high strengths than the same dose in freebase. That is why 20mg salt can feel manageable, whereas a freebase liquid at the same strength would be harsh.

A practical way to choose is to start at the level that matches your current use and adjust after a few days:

• If you still get cravings between puffs, move up a strength.
• If you feel dizzy, nauseous, jittery or get a headache, move down or take longer gaps between puffs.
• If you vape constantly but never feel satisfied, the cause is more often the wrong strength than the wrong device.

If you do not currently smoke or vape, you should not start. Nicotine is addictive and these products are intended to help existing smokers move away from cigarettes. Pregnant women and people with heart conditions should speak to a doctor or pharmacist before using any nicotine product, and the NHS offers free stop-smoking support if you want to quit nicotine altogether.

Who it is for, and who should skip it

No single device suits everyone. A pod kit this size does a specific job well and is the wrong tool for several others. Here is a plain account of both sides.

This kit is a good fit if you:

• Are an adult smoker moving away from cigarettes and want something simple to learn.
• Currently use disposables and want to cut your spending and waste by moving to a refillable device.
• Prefer mouth-to-lung vaping, which feels closest to smoking a cigarette.
• Want a small device that fits into a pocket and does not need regular maintenance.
• Are new to refillable systems and want to avoid wattage settings, coil building and tank assembly.
• Want a spare or travel device alongside a larger setup.

You may want to skip it, or look at something else, if you:

• Want big clouds and a loose direct-to-lung draw. A sub-ohm tank or a higher-power pod mod is a better fit.
• Need adjustable wattage and airflow so you can fine-tune the vape. A pod kit of this type deliberately keeps these choices simple.
• Vape very heavily all day. You will be refilling and charging often, and a larger battery device will suit you better.
• Use thick, high-VG dessert liquids exclusively. These can struggle in small pod coils.
• Are under 18, or have never smoked or vaped. These products are not for you.
• Want to use a larger refill bottle on the go. UK nicotine bottles are capped at 10ml, so you will always be refilling from small bottles.

It is also worth thinking about how you plan to use the device. For people who vape in short bursts during the day, a kit like this is convenient. For those who like to sit and vape for long sessions, the small pod and battery will feel limiting and more frequent refilling becomes an annoyance.

If you are on the fence, a good test is to ask whether you want to think about your vape. If the answer is no, and you want to fill it, use it and charge it, this kit does that. If the answer is yes and you enjoy adjusting settings, a more advanced device will serve you better.

How to set up and use it

Setting up the kit takes a couple of minutes. Follow the steps in order and you should avoid the most common first-day problems, which are leaking, dry hits and a pod that never seems to work.

• Step 1, charge first. Plug the kit in with a USB-C cable and give it a short charge before first use. Even if it arrives partly charged, a top-up helps.
• Step 2, remove the pod. Pull the pod gently from the top of the device. Peel off any protective film or plugs from the pod and the mouthpiece.
• Step 3, open the fill port. Lift or pull back the silicone bung on the side or the base of the pod, according to the design of your pod.
• Step 4, fill with e-liquid. Hold the pod upright, place the bottle tip in the fill hole and add liquid slowly, stopping at or just below the max line. Do not cover the central air tube.
• Step 5, close the bung. Push the silicone plug fully back in. A half-closed bung causes leaks.
• Step 6, let it soak. Leave the pod upright for five minutes so the coil wicks properly.
• Step 7, reinsert the pod. Push it into the device until it clicks.
• Step 8, take a few priming puffs. Draw gently three or four times without a long pull.

To switch the device on or off, follow the manual. Many kits of this type use five quick presses of the button, if there is one, to lock or unlock the device, which is useful for stopping accidental firing in a pocket. In draw-activated models you simply inhale on the mouthpiece to fire it.

When using it, take slow, steady draws of two to four seconds. Longer, harder pulls can flood the coil and make it spit. Pause for a few seconds between draws if you are using a high-strength liquid.

For refilling, top up when the level in the pod drops below about a quarter. Do not wait until it is empty, since a dry coil burns quickly and ruins the pod. Each time you refill, check that the bung is seated and wipe any liquid off the outside of the pod, since spilled liquid can reach the contacts and cause misfires.

For storing, keep the device upright where possible and avoid leaving it in a bag with other items pressing on the pod. Keep all e-liquid and devices out of reach of children and pets, as nicotine is harmful if swallowed or if it touches the skin in large amounts.

Troubleshooting common problems

Most problems with pod kits have simple causes. Work through the likely ones before assuming the device is faulty. The list below covers the problems that come up most often.

• Leaking from the pod or device: usually caused by overfilling, a bung that is not fully seated, or a pod that has cooled and warmed in a hot environment. Wipe it dry, check the fill level and reseat the bung. Avoid leaving the kit in a hot car.
• Dry or burnt taste: the pod ran low, was not primed or is nearing the end of its life. Refill, prime for five minutes, and replace the pod if the taste does not improve after a couple of fills.
• Gurgling or spitting: too much liquid in the air path, or condensation. Blow gently back through the mouthpiece, or wipe the mouthpiece clean, then take shorter draws.
• No vapour but the light flashes: often a poor contact or a pod that is not seated. Remove the pod, wipe the contacts on the pod and the device with a dry cotton bud, and reinsert it.
• Device does not fire: check that it is charged and not locked. If it is draw-activated, check that the airflow inlet is not blocked by a finger or a pocket lint. Try pressing the button five times if the manual says this toggles a lock.
• Error light or rapid flashing: may indicate a short circuit, low resistance or a coil that has failed. Fit a fresh pod to rule out the pod.
• Battery does not hold charge: after many months of heavy daily use, this is a normal sign of cell wear. If it happens within weeks of purchase, contact us, as it may be a faulty unit.
• Weak or muted flavour: a worn coil, a very thick liquid or a recently switched flavour with residue in the pod. Try a fresh pod, or a thinner liquid.
• Sore throat or harsh hit: the nicotine strength is too high, or the draw is too hard. Drop down a strength or take lighter draws.

If a pod has leaked heavily into the device, switch it off, remove the pod and wipe the body and contacts with a dry tissue. Leave it to dry for a few hours before using it again. Do not charge a wet device.

If a problem persists after you have tried a fresh pod, a clean set of contacts and a full charge, then the device is likely to be at fault. Contact us with your order number and a short description of the problem, and we will tell you what to do next. Do not try to open the casing, as the battery inside is not user-serviceable and doing so voids any warranty.

Value for money and how it compares

The upfront cost of a kit like this is higher than a single disposable, but the running cost is lower. A disposable vape gives a few hundred puffs before it is thrown away. A refillable kit keeps going for months, and your ongoing cost is the e-liquid, which is cheap per millilitre, plus a replacement pod every week or two.

For a typical user, the break-even point against disposables is usually reached within the first few weeks. After that, the saving builds. The environmental case is also clear, since you are not throwing away a battery and a plastic shell every few days.

It is fair to say how it compares with other devices in the same part of the market. We have not listed exact specifications for rival products, because they change with each revision, so the notes below describe the general character of each.

• Vaporesso XROS range: the XROS series is Vaporesso's more developed pod line, generally with more features, such as adjustable airflow or output on some models, and with a higher price. If you want a few more controls, look there. If you want the simpler approach, this kit makes more sense.
• Uwell Caliburn range: a well-known compact pod system with its own pod ecosystem. Similar in size and in use. The choice often comes down to which pod flavour feel you prefer, and the availability of replacement pods.
• OXVA Xlim range: popular for a wide pod range, including different resistances, which gives you more tuning options. A good option if you want to experiment with coils.
• SMOK Novo range: another established brand with broad pod availability. The Novo range tends to appeal to those who like a slightly different ergonomic feel, so it is worth holding one if you can.
• Geek Vape Wenax and Aegis ranges: the Wenax pods are compact, while the Aegis line leans towards durability. If you work outdoors or are hard on your gear, the sturdier line is worth a look.

The advantage of this kit over many rivals is its simplicity and the strength of Vaporesso's supply chain, which means spare pods are usually easy to find. The disadvantage is that it does less than some competitors. There is no wide range of settings and you cannot rebuild the coil.

When thinking about value, do not just look at the kit price. Consider the pod price, how long a pod lasts for you, and whether the pods are in stock when you need them. A kit with cheap pods that are always available is better value than a cheaper kit whose pods are hard to find.

Delivery to UK addresses is available, with options shown at checkout. As these are age-restricted products, you should expect age checks as part of the process. For any fault within the warranty period, contact us with your order details and we will help you from there.