Pink Lemonade Mix Lab Salts 10mg

Overview

The Pink Lemonade Mix Lab Salts 10mg by Mix in Pink Lemonade at 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Mix Lab Salts 10mg Pink Lemonade at a glance

Mix Lab Salts 10mg Pink Lemonade is a nicotine salt e-liquid from the Mix brand, formulated for low-power pod kits and mouth-to-lung (MTL) vaping. It combines a sweet-and-tart pink lemonade flavour with a 10mg/ml nicotine salt base. That strength sits in the middle of the UK range: more nicotine than the 3mg or 6mg bottles aimed at people who have already stepped down a long way, and half the 20mg/ml ceiling that UK law sets for nicotine e-liquids and vapes alike.

This guide is written for UK vapers. It explains what the liquid is, how it tastes, which hardware suits it, and where it makes sense compared with other options. Where a figure depends on the exact batch, such as the VG/PG ratio, the label on your bottle is the final word, because we would rather point you to the printed specification than guess.

• Product type: nicotine salt e-liquid for refillable devices, not a disposable vape.
• Nicotine strength: 10mg/ml, which is 1% nicotine by volume.
• Bottle size: 10ml, the largest size permitted for nicotine e-liquid bottles sold in the UK.
• Flavour: pink lemonade, a sweet lemon base with a soft berry-style fruitiness.
• Hardware fit: refillable pod kits and low-wattage MTL starter kits, typically with 0.6 to 1.2 ohm coils.
• Age restriction: 18 and over only. Expect age checks at checkout and on delivery.

The short version: if you want a smooth, sweet, fruity vape at a moderate nicotine level, and you already own (or are willing to buy) a refillable pod device, this is a straightforward choice. If you are after something that arrives charged and ready to use, a pre-filled pod system is a different product category, and we cover how the two compare later in this guide.

Flavour profile: what pink lemonade tastes like in a nic salt

Pink lemonade as an e-liquid flavour is usually built from three layers: a bright citrus top note, a sweetener that rounds off the sharpness, and a faint red-fruit or berry character that stands in for the pink colour of the drink. Mix Lab Salts Pink Lemonade follows that general pattern. Expect the lemon to arrive first on the inhale, the sweetness to build through the middle of the draw, and a gentle berry-tinged finish on the exhale.

Taste is subjective and it shifts with hardware, so treat the following as a guide rather than a promise.

• Inhale: a clean, slightly tart lemon note. It is closer to a bottled lemonade than to fresh lemon juice, so the acidity is softened.
• Mid-draw: sweetness rises. At 10mg in a salt base the throat sensation is mild, so the sugary notes are not masked by harshness.
• Exhale: a light fruity finish, often described as raspberry or strawberry leaning, with a cool-drink character rather than a menthol cooling effect.

It is worth saying plainly that pink lemonade is not a menthol or ice flavour. Some fruit e-liquids include a cooling agent. If one is present here it is mild, and we would not describe this as an icy vape. If you want a stronger chill, look at menthol-based or ice variants in a similar fruit family instead.

Sweetness is the characteristic most people notice. Salt-nic bases tend to deliver flavour with less throat harshness than freebase at the same strength, so sweet profiles can come across as rounder and easier to take. On the other hand, heavily sweetened liquids leave more residue on coils. In practice that means a coil used with a sweet lemonade profile can start to taste muted or slightly caramelised sooner than a coil used with a tobacco or plain menthol liquid. We cover coil life in more detail further down.

If you tend to find fruit flavours cloying after a few hours, pink lemonade is one of the more sessionable fruit profiles because the tartness cuts through the sugar. That said, anyone who dislikes sweet drinks should probably choose a different flavour. A 10ml bottle is a small outlay, but it is still a bottle you will not finish if the taste is not to your liking. Tip: if you are unsure, buy a single bottle first and judge it over a few days rather than a few puffs, because flavour perception settles once your palate adjusts.

Performance and puff delivery at 10mg

Because this is an e-liquid rather than a complete device, the performance you get depends on what you vape it in. In a typical low-power pod kit, a 10ml bottle of nicotine salt liquid is enough for roughly 2,000 to 3,000 puffs. That is an estimate based on how MTL pods consume liquid: a standard 2ml pod usually delivers somewhere between 400 and 700 puffs, depending on puff length and coil. Five pods' worth of liquid in a 10ml bottle therefore lands in that range.

What that means in daily life:

• Light use (100 to 150 puffs a day): a bottle can last two to three weeks.
• Moderate use (200 to 300 puffs a day): expect roughly one to two weeks.
• Heavy use or chain vaping: a bottle may be gone in four or five days. If that is you, it is worth reviewing the nicotine strength, because frequent puffing can be a sign the level is too low for your needs.

Throat hit at 10mg salt is moderate. Nicotine salts are formulated with an acid, commonly benzoic acid, which lowers the pH of the liquid and makes nicotine feel smoother on the throat than the same milligram strength of freebase. A 10mg salt typically feels gentler than a 10mg freebase while delivering nicotine to the bloodstream more quickly, which is why many people who are leaving cigarettes find salts more satisfying at lower strengths.

Vapour production is deliberately restrained. Salt e-liquids are usually matched with low-wattage devices, generally between about 8 and 15 watts, and with a balanced or PG-leaning base, so clouds are small and the draw is tight. If you enjoy big clouds, a sub-ohm device with a high-VG shortfill is a different style of vaping altogether, and a 10mg salt is not suited to it. High power combined with salt nicotine produces a harsh, overly strong hit and burns through liquid quickly.

Consistency from first puff to last is usually good as long as the wick stays saturated. If the flavour fades sharply partway through a tank, that is typically a priming, airflow or coil-age issue rather than a fault with the liquid itself. The troubleshooting section below covers the common causes and what to do about them.

Bottle design and build quality

For a liquid, design and build quality mostly means the bottle, the closure and the label. UK rules shape much of this. Under the Tobacco and Related Products Regulations 2016 (TRPR), nicotine e-liquid must be sold in containers no larger than 10ml, with a child-resistant and tamper-evident closure, and the container must carry a health warning, an ingredients list, the nicotine strength and a batch number. Any bottle legitimately sold in the UK follows that format, and you can check each point on your own bottle.

Things worth checking when your bottle arrives:

• Tamper-evident ring: the band under the cap should be intact before first opening. If it is already broken, contact us rather than using the bottle.
• Child-resistant cap: you press or squeeze and turn to open it. It can feel fiddly at first, which is the point. Keep bottles out of reach of children and pets at all times.
• Nozzle: 10ml bottles typically use a thin, flexible tip that fits the fill port of most pod devices. A few very narrow fill ports are easier to use with a slim tip.
• Label: the strength should read 10mg/ml (sometimes written as 1%), and the batch code and best-before date should be legible.
• Squeeze behaviour: the plastic should return to shape rather than collapse, so you can control the flow drop by drop.

Bottles of this type are usually made from PET or a similar plastic, which is lightweight, does not shatter in a bag and resists the ingredients in the liquid. They are not designed for long-term storage of decanted or mixed liquid, and you should never transfer nicotine liquid into an unlabelled container.

Storage matters more than most people expect. Keep the bottle upright, capped, away from direct sunlight and away from heat sources such as radiators or a car dashboard. Light and heat darken nicotine liquids and can flatten flavour over time. A darker liquid is not automatically unsafe, but if the colour has shifted a lot and the taste has changed, consider replacing it.

Recycling: once a bottle is empty, check with your local council about whether empty e-liquid bottles can go into the household plastics collection. Many councils ask you to rinse them and keep the cap on, while some prefer them in general waste because of nicotine residue. Batteries and devices are a different matter and are covered in the battery section below.

Coil and mesh technology: matching hardware to the liquid

A nicotine salt liquid is designed for low-power, higher-resistance coils. Choosing the wrong hardware is the most common reason a decent liquid tastes poor, so it pays to match the two before you fill anything.

• Standard MTL coils (0.8 to 1.2 ohm): usually fired between about 8 and 14 watts. They give a tight, cigarette-like draw, modest vapour and concentrated flavour. This is the classic pairing for 10mg salts.
• Mesh pod coils (0.6 to 0.8 ohm): a flat mesh sheet replaces the wire-and-cotton arrangement. The larger heating surface warms quickly and evenly, which tends to give a fuller flavour at the same power. Mesh coils are often rated for roughly 12 to 20 watts. With a 10mg salt, stay toward the lower half of the range printed on the coil.
• Ceramic and pre-built closed-pod coils: used in some compact systems. They are convenient, but wicking rates differ between designs, so check that the manufacturer lists nicotine salt or 50/50 style liquid as suitable.

Most refillable pod kits that suit this liquid use organic cotton wicking. Cotton needs a few minutes to saturate fully, and a thinner liquid wicks faster than a thick one. Salt liquids with a balanced VG/PG split generally wick easily in MTL coils. Very high-VG liquids can starve small coils, which is why shortfills and sub-ohm liquids are a poor match for a pod kit, and why a 10mg salt is a poor match for a sub-ohm tank.

Coil life is where sweet flavours show their cost. Sugars and sweeteners caramelise on the heating element over time. A coil that tasted lively on day one can taste flat or faintly burnt after one to two weeks of moderate use with a sweet lemonade liquid, whereas a coil used with a drier flavour might last a little longer. As a rule of thumb, plan on changing the coil every one to two bottles, or sooner if the flavour drops.

Power settings: if your device has adjustable wattage, begin at the bottom of the coil's recommended range and move up one watt at a time. Salt nicotine delivers a lot at modest power, and pushing wattage higher mainly makes the vapour hotter, the throat hit harsher and the bottle empty faster. If your device is fixed-output, make sure the coil you buy is the one the device was designed for.

Airflow also changes the experience. A tighter airflow concentrates flavour and strengthens the throat hit, while opening the airflow cools the vapour and dilutes both. If you find the lemon note sharper than you would like, opening the airflow slightly is often enough to smooth it out.

Battery and charging for the device you pair it with

The liquid itself has no battery, but the device you vape it in does, and the two interact: wattage affects both flavour and runtime. Refillable pod kits that suit nicotine salts typically carry batteries between 400mAh and 1,000mAh, with a few larger kits going to 1,500mAh or more.

A little arithmetic helps set expectations. A 1,000mAh lithium cell at 3.7V holds about 3.7 watt-hours. At 10 watts, and allowing for some conversion loss, that is roughly 20 minutes of total firing time, or around 400 puffs of three seconds each. A 650mAh device would manage about 250 puffs on the same maths. Real-world results vary with coil resistance, regulation and cell age, but those numbers explain why a small pod kit usually needs charging daily while a larger one can stretch to a couple of days.

• Charging port: USB-C is now standard on most pod kits, though older models may use micro-USB. Use the cable supplied or one from a reputable maker.
• Charging speed: most pod kits charge at 0.5 to 1 amp. A plain 5V phone charger or a computer USB port is fine, and you do not need a high-wattage fast charger.
• Attention: do not leave a device charging unattended overnight, and do not charge it on a bed, sofa or other soft surface.
• Warning signs: a swollen casing, unusual heat, a hissing noise or a burning smell means stop using the device immediately, move it somewhere non-flammable and dispose of it through a proper channel.
• Pocket safety: do not carry a device loose in a pocket with coins or keys, which can short the contacts.

When a battery or device reaches the end of its life, it should not go in household bins or kerbside recycling. In the UK, vapes and their batteries count as waste electrical equipment. Retailers that sell vaping products are expected to offer take-back, and household waste recycling centres accept them. The Recycle Your Electricals drop-off locator will show nearby vape-recycling points. Batteries in bin lorries and waste plants are a real fire risk, so using a proper drop-off point matters.

It is also worth knowing that single-use disposable vapes can no longer be sold in Great Britain, following the ban that took effect on 1 June 2025. Before that, disposables were bound by the same 20mg/ml nicotine cap and 2ml tank limit that applies to every nicotine vape sold in the UK. Rechargeable, refillable kits are now the main route for people who liked that convenience, and a 10mg salt liquid is a common choice for them.

Nicotine strength guidance: is 10mg right for you?

Under UK rules, nicotine e-liquids and vapes of every type, disposables included, can contain no more than 20mg/ml of nicotine. This bottle is 10mg/ml, so it sits at the midpoint of the permitted range. Nicotine is addictive, and this product is intended for adults who already smoke or vape. If you do not currently use nicotine, you should not start.

The following are general guidelines for adult smokers and vapers, not medical advice.

• 20mg/ml: usually chosen by people leaving heavier smoking, around 15 or more cigarettes a day, who want the highest legal strength in a salt.
• 10mg/ml: a common middle setting for people who smoke or smoked roughly 5 to 15 cigarettes a day, or who find 20mg too sharp. It is also a typical step-down for 20mg users who are cutting back.
• 5mg/ml or lower: aimed at light users, or those close to stopping nicotine altogether.

Salt versus freebase matters here. Ten milligrams of nicotine salt is not equivalent to ten milligrams of freebase. Salts absorb faster and feel smoother, so many people find 10mg salt at least as satisfying as 12mg freebase. If you are used to freebase liquids at 6mg to 12mg in a tank, 10mg salt is a reasonable thing to try, but expect a noticeably different feel: less throat scratch and a quicker effect.

Signs the strength is too high include nausea, lightheadedness, headache, a racing heart, sweating, or a throat hit so harsh that it makes you cough. If that happens, stop vaping, get some fresh air and drink water. If symptoms are severe or do not pass, seek medical advice. Signs the strength is too low include vaping far more often than you expected, still craving cigarettes, or finding yourself chain vaping to feel satisfied. Moving up one step can help, and many people find they actually vape less overall once the strength is right.

Stepping down: people who want to reduce nicotine gradually often move from 10mg to 5mg and then lower, spending a few weeks at each level. Local stop smoking services and pharmacists can offer free advice on reducing nicotine safely. If you are pregnant or breastfeeding, have a heart condition, or take regular medication, speak to your GP before using any nicotine product. Nicotine products are strictly for over-18s, and age verification applies to every order.

Who Mix Lab Salts Pink Lemonade is for, and who should skip it

This liquid suits a fairly specific group of adult nicotine users. Being honest about who it does not suit saves everyone time and returns.

It is a reasonable fit for:

• Smokers who are switching: adults moving away from cigarettes who want a smooth, familiar-feeling nicotine delivery without a harsh throat hit, and who smoked a moderate amount.
• Existing pod kit owners: if you already have a refillable MTL pod device, a 10ml bottle gives you a flexible, low-cost way to fill it.
• Former disposable users: with single-use disposables off the shelves in Great Britain, many people have moved to refillable kits. A 10mg salt in a fruity flavour is a natural step for anyone who liked that style of sweet, light vape.
• Vapers who like fruit over tobacco: the tart-sweet balance suits people who find tobacco and dessert flavours either too dry or too heavy.
• People stepping down from 20mg: 10mg is a logical halfway point on the way to lower strengths.

You should probably skip it if:

• You have never smoked or vaped: nicotine is addictive and you gain nothing by starting.
• You are under 18: it is illegal for us to sell to you, and illegal for anyone to buy on your behalf.
• You smoke heavily and want maximum nicotine: a 20mg salt may serve you better, and starting too low often leads to frustration and a relapse to cigarettes.
• You use a sub-ohm tank: this is a low-power liquid and it is not suitable for high-wattage, high-airflow devices.
• You dislike sweet flavours: pink lemonade is sweet by design. A tobacco, plain menthol or mint profile is a better match for your taste.
• You want a ready-made device: a bottle of liquid needs hardware. If you have none, you will need to buy a refillable pod kit first, or choose a pre-filled pod system.

If you are new to refillable devices, bear in mind there is a small learning curve around filling, priming and coil changes. It is not difficult, and the next section walks through it step by step.

How to use Mix Lab Salts Pink Lemonade

Filling a pod kit takes about a minute once you have done it a couple of times. The steps below suit most refillable MTL devices, but your device manual takes priority if it says otherwise.

• Step 1, prepare: wash and dry your hands, then switch the device off or make sure it cannot fire accidentally. Work over a table or tray, not over carpet or a bed.
• Step 2, open the pod: remove the pod or tank from the device. Locate the fill port, usually a rubber bung or a sliding cover on the side or top.
• Step 3, fill: uncap the bottle by pressing and turning. Place the tip in the port at a slight angle and squeeze gently. Stop just below the fill line and never cover or block the central air tube. Overfilling is the leading cause of leaks and gurgling.
• Step 4, close up: close the port firmly, wipe off any spilled liquid and cap the bottle straight away.
• Step 5, wait: leave a freshly filled pod standing upright for five to ten minutes. A new coil benefits from the longer end of that range, because dry cotton burns easily.
• Step 6, prime: take a few gentle draws without pressing the fire button (on button-fired devices) or take two or three short, low-power puffs before settling into your usual rhythm.
• Step 7, vape: take slow, steady draws of two to three seconds, and pause between puffs to let the coil re-wet. Rapid back-to-back puffs are the quickest way to dry out a coil.

Keep these habits in mind through the day:

• Top up before the pod is empty, not after. Running a coil dry shortens its life and gives a burnt taste.
• Keep the device upright when carrying it to reduce leaks, and avoid leaving it in hot cars or in direct sun.
• Do not mix different liquids in one pod. If you want to change flavour, empty and rinse the pod, let it dry, and ideally fit a new coil to avoid ghosting.
• Keep the bottle, pod and device away from children and pets. Nicotine liquid on skin should be washed off with soap and water straight away.

Take it slowly in the first session. Salt nicotine is absorbed quickly, so a few puffs can feel stronger than you expect. If you feel light-headed, pause and wait before taking more.

Troubleshooting common problems

Most issues with salt liquids come from hardware set-up rather than the liquid, and are quick to fix. Here are the ones we see most often.

• Gurgling or spitting: usually a sign of overfilling or condensation. Pour a little out, wipe the mouthpiece and airflow paths, and give a few gentle puffs to clear it. Do not fill past the marked line.
• Burnt or dry taste: either the coil has been run dry or it is worn out. Check the liquid level, let the wick re-saturate for several minutes, and fit a fresh coil if the taste does not recover. Sweet liquids tend to age coils faster.
• Weak or muted flavour: this may be a worn coil, a low wattage setting, or what vapers call vaper's tongue, where your palate gets used to a single flavour. Try a new coil, move the wattage up by one step, or take a day off the flavour and switch to something different to reset.
• Leaking: check the pod is seated fully, the fill port is closed, and the pod has not been overfilled. Temperature changes and pressure shifts on flights can also push liquid out, so carry the device upright and ideally empty on a plane.
• Harsh throat hit: power may be too high, airflow too tight, or the strength too much for you. Turn the wattage down, open the airflow slightly, or consider a 5mg salt.
• Weak throat hit or poor satisfaction: the opposite problem. Try a tighter airflow, slightly more power within the coil's range, or step up in strength if you are consistently under-served.
• No vapour at all: check the battery charge, make sure the pod is seated properly and the contacts are clean, and confirm the coil is the right type for the device. If the device flashes a warning, consult the manual for what that pattern means.
• Sticky residue on the device: sweet liquids can leave a film on the mouthpiece and pod. Wipe with a slightly damp cloth, dry thoroughly and keep liquid away from the charging contacts.
• Liquid has darkened: mild darkening with age is normal for nicotine liquids. If the taste is still fine, it is usually fine to use, but if it smells or tastes off, replace it.

If you have tried these fixes and the problem remains, contact us with your device model, the coil type and a short description of what is happening, and we will help you work out whether it is the hardware, the coil or the bottle. Please do not continue to use a device that is hot, damaged or leaking from the battery compartment.

Value for money

Refillable vaping is generally cheaper per puff than pre-filled systems, and a 10ml salt bottle is a good example of why. Exact pricing changes, so check the current price on the product page, but the arithmetic below shows how to judge it for yourself.

Take a worked example, for illustration only. If a 10ml bottle costs about £4 and yields around 2,500 puffs in a typical pod kit, that works out at roughly 16p per 100 puffs. A pre-filled 2ml pod at about £3 that delivers 500 puffs works out at roughly 60p per 100 puffs. The refillable route is therefore several times cheaper on running costs, once you have the device.

• Upfront cost: you need a refillable pod kit, typically from around £10 to £30 depending on features. That outlay pays back within a few bottles for most users.
• Running costs: coils are the other regular expense. Expect to replace one every one to two bottles, so budget accordingly.
• Waste and convenience: a refillable system generates less electronic waste than any pre-filled approach, because the device lasts for months or years and only the coil and bottle are consumed.
• Price per ml: divide the bottle price by ten. This is the figure to compare against other 10ml salts, which are limited to the same bottle size in the UK.

It is fair to point out where value can slip. If you use the wrong coil or run the wattage too high, a bottle can empty far faster than it should. If you buy a single bottle at a time and pay for delivery each time, shipping adds to the effective price, so it often makes sense to buy several bottles in one order if you are happy with the flavour. Multi-buy deals, where offered, can reduce the per-bottle price further.

Finally, think about what you would otherwise spend. For an adult smoker who is switching, vaping typically costs a fraction of cigarettes over a month, and 10mg salt in a fruity flavour is among the more affordable ways to do it. That is not a health claim, simply a cost comparison. If you have questions about the health aspects of switching, speak with your GP or a stop smoking adviser.

How it compares with the alternatives

No single liquid suits everyone, so here is a fair look at where Mix Lab Salts Pink Lemonade sits against the options most people consider.

• Versus the same flavour at 20mg: the 20mg version is aimed at heavier smokers and delivers a firmer throat hit and stronger effect. The 10mg version is smoother and lasts longer in use because you can take more puffs before feeling you have had enough. Neither is better in general; it depends on your habit. If you are unsure, 10mg is the safer first choice, since you can always step up.
• Versus freebase nicotine in a 50/50 or 70/30 liquid: freebase has a sharper throat hit and works well in higher-powered devices. Salts are smoother at higher strengths and quicker to satisfy a craving. If your kit is a low-power pod, salt is typically the better technical match. If you use a sub-ohm tank, freebase shortfills are the right category instead.
• Versus pre-filled pod systems: pre-filled pods are tidier and there is no filling step, but running costs are higher and flavour choice is limited to what the manufacturer sells. A refillable kit with a 10ml salt gives you more choice and lower cost, in return for a little more fuss.
• Versus former disposables: single-use disposables are no longer sold in Great Britain, so this is less a choice than a replacement. Refillable salts offer similar nicotine levels, since disposables were also capped at 20mg/ml, but with far less waste.
• Versus other pink lemonade nic salts: several UK brands sell a pink lemonade salt at 10mg, and they differ mainly in sweetness, in how much berry sits behind the lemon, and in whether a cooling agent is added. Sweetness and cooling are matters of taste, so a different brand may suit you better. We suggest comparing the product pages for the flavour descriptions, and trying one bottle at a time.

Where Mix Lab Salts Pink Lemonade is less strong: it is a single-flavour bottle, so it does not suit anyone who wants a menthol or ice profile. It also asks for a compatible device and the small amount of upkeep that comes with refillable hardware. Those are trade-offs rather than faults, and they are worth knowing before you buy.

Where it does well: a moderate 10mg strength, a sessionable tart-sweet profile, a standard 10ml format that fits virtually every refillable pod kit, and a running cost that sits well below pre-filled alternatives. For an adult smoker who wants a fruit-led switch, it is a sensible and practical choice.