Mrs Red Ohm Brew Badass Blend 50ml

Overview

The Mrs Red Ohm Brew Badass Blend 50ml by Ohm in Mrs Red at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Ohm Brew Badass Blend Mrs Red 50ml: overview

Ohm Brew Badass Blend Mrs Red is a 50ml shortfill e-liquid from the Ohm Brew range, one of the colour-coded character flavours in the Badass Blend line alongside names such as Mr Blue and Mr White. It is supplied as nicotine-free base liquid at 0mg, which means you can vape it exactly as it comes, or you can add a nicotine shot to the bottle to reach a strength that suits you. This guide explains what you are buying, what the flavour is likely to deliver, which devices suit it, how to mix it, how to fix common problems and how it compares with other 50ml options sold in the UK.

The Badass Blend family is built around big-bottle value. Rather than selling a small 10ml bottle at a premium, the range puts a large volume of liquid in a bottle that is meant to be refilled into a tank over several days. The Mrs Red variant sits in the red-toned part of the line-up. The name points towards a red fruit direction, although brands rarely publish exact flavour recipes, so we describe it in general terms later in this guide and ask you to treat the listing and the bottle label as the final word.

A shortfill is the standard way to buy larger e-liquid volumes in the UK. Nicotine-containing e-liquid is limited by law to 10ml bottles and a maximum strength of 20mg/ml, so a 50ml bottle cannot legally contain nicotine at the point of sale. The 50ml of liquid arrives in a larger bottle (commonly 60ml) with headroom left over, and you add a 10ml nicotine shot yourself if you want nicotine. If you vape at 0mg, the bottle is ready to use straight away.

Everything on this page is aimed at adult UK vapers. Vaping products are strictly 18+ and are intended for adults who already smoke or vape. If you do not currently use nicotine products, there is no reason to start, and the 0mg format is the only reasonable choice for you if you simply enjoy flavour.

Key specifications and what is in the bottle

Because Ohm Brew does not publish a detailed technical sheet for each flavour, the specification list below combines the confirmed listing details with category-level facts that apply to shortfills of this type. Where a figure is typical rather than confirmed, we say so and suggest you check the printed label on the bottle you receive, since brands can adjust recipes between batches.

• Brand: Ohm Brew (listed under Ohm)
• Range: Badass Blend
• Flavour name: Mrs Red
• Liquid volume: 50ml of e-liquid
• Nicotine as supplied: 0mg/ml (nicotine-free)
• Bottle capacity: typically 60ml, leaving room for one 10ml nicotine shot
• Base: shortfills in this style are usually a high-VG blend, commonly 70VG/30PG, so check the label for the exact ratio
• Intended hardware: sub-ohm tanks, mesh coil tanks and any open-airflow device built for thicker liquid
• Flavour type: fruit-led, with a sweet profile
• Age restriction: 18+ only

What does the VG/PG ratio actually mean in practice? VG, or vegetable glycerine, is a thick, slightly sweet liquid that produces dense vapour and a soft, rounded throat feel. PG, or propylene glycol, is thinner, carries flavour sharply and delivers a firmer throat hit. A 70VG/30PG blend leans towards smooth, cloud-friendly vaping, which is why shortfills in this category are paired with larger coils and airflow-heavy tanks rather than tight, restrictive pod devices.

The thickness of a high-VG liquid also matters for wicking. Thicker liquid moves through cotton or mesh more slowly, so a coil designed for it has bigger wicking openings and a larger heating surface. Using a high-VG juice in a very small, tight-wicked pod coil is a common reason for dry or burnt hits, which we cover in the troubleshooting section.

Inside the box or bag you receive the sealed bottle, normally with a tamper-evident cap, a child-resistant mechanism and a narrow dripper tip for filling tanks cleanly. A nicotine shot is not included, because a shot is a separate product with its own age and strength rules. Buy one at the same time if you want a nicotine-containing mix, so that you can fill your tank the moment the parcel lands.

Flavour profile: what Mrs Red is likely to taste like

Mrs Red is a fruit-led flavour, and the name steers the expectation towards red-toned fruit rather than tobacco, dessert or menthol. Exact ingredient lists are not published, so the description here is a general reading of how red fruit blends in this style behave, based on the name and on the way the rest of the Badass Blend line is positioned. If the product description on this page names specific fruits, that wording takes priority over anything inferred here.

Red fruit e-liquids usually work in three stages. On the inhale you can expect a juicy, sweet opening, often reminiscent of ripe berries or a fruit-candy style red note. Through the middle of the draw, a gentle tartness commonly appears to stop the sweetness becoming heavy. On the exhale, the flavour tends to settle into a rounder, syrupy finish that lingers for a short time. A high-VG base softens the sharper edges of all three stages and generally makes a fruit blend taste smoother and a little sweeter than the same recipe would in a high-PG base.

• Sweetness: moderate to high, in line with other fruit-candy style blends
• Acidity: mild tartness to balance the sugar notes
• Coolness: do not assume any menthol or ice; if you want a cooling finish, look at a flavour that names it explicitly
• Aftertaste: a sweet, fruity finish that fades gradually
• Complexity: a blended fruit profile rather than a single flat note

Flavour perception depends heavily on the hardware. In a mesh-coil tank at moderate wattage, fruit juices tend to show their top notes clearly and keep a defined tartness. At higher wattage the same liquid warms up, the sweetness comes forward and some of the sharper top notes can flatten. At lower wattage the flavour is cleaner but lighter. If the first few tank fills seem muted, try adjusting power in small steps rather than changing liquid straight away.

Adding a nicotine shot also changes the taste slightly. Nicotine itself carries a mild peppery bitterness, and a typical 3mg mix is subtle, but at higher strengths the throat feel becomes more noticeable and can compete with delicate fruit notes. If you prefer to taste the fruit above everything else, the lower end of the strength range will serve you better.

One more practical point: red fruit and berry flavours tend to stain tank glass and drip trays slightly over time, and they can leave a sweet residue on the coil faster than a lighter flavour would. This is normal for sweetened e-liquids and is managed by changing coils on a regular schedule, which is covered below.

Performance: vapour production and throat hit

Performance with a shortfill depends on three things working together: the VG/PG ratio of the liquid, the coil and tank you put it in, and the power you run. The liquid contributes vapour density and throat feel. The hardware determines how efficiently that liquid is turned into vapour. When people describe a bad experience with a shortfill, it is usually the hardware pairing that is off rather than the juice itself.

Vapour production. With a high-VG base, Mrs Red should produce dense, soft vapour in a sub-ohm or mesh coil tank. The cloud size is a function of airflow and wattage, not just the liquid, so a wide-open airflow setting at a suitable power will give visibly larger exhales than a tight draw. If you only want a gentle, discreet vape, close the airflow ring partially and reduce the wattage.

Throat hit. A 0mg liquid has no nicotine throat hit, and a high-VG base is naturally gentle on the throat. The result is a smooth draw with no harshness from the liquid itself. If you add a 3mg shot, the throat feel is mild; at 6mg it becomes noticeable; beyond that it is a firm sensation that most shortfill users do not need. Remember that a bigger, airier draw delivers more liquid per puff, so a low nicotine strength goes a long way.

Flavour delivery. Flavour on a high-VG liquid is typically rounder and softer than on a thin, high-PG liquid. In a fresh coil, flavour is usually at its strongest in the first few days and drifts down as the coil ages. Sweetened fruit juices tend to caramelise on the coil faster, which is why a coil that tasted vivid on Monday can taste muted by the following weekend. A coil change usually restores it.

Consistency. Because the liquid is thick, it is worth letting a freshly filled tank sit for five to ten minutes before the first puff. This lets the cotton or mesh saturate fully and reduces the chance of dry hits. Priming the coil with a few drops of liquid directly onto the wicking holes, then waiting, is a good habit with any new coil.

In general terms, the experience should suit adults who want a smooth, fruit-forward everyday vape in a larger device, and it is less suited to tiny pod hardware designed for thinner liquid or for nicotine salts.

Design, packaging and build quality

For an e-liquid, design and build quality means the bottle, the cap, the labelling and the way the product protects its contents. Shortfills from Ohm Brew use the usual soft plastic bottle with a long, narrow nozzle. The softness of the bottle lets you squeeze liquid out in controlled amounts, and the narrow tip fits most tank fill ports without spilling. The cap is child-resistant, so you press and turn rather than simply unscrewing it, which is a legal requirement for e-liquids sold in the UK.

Colour-coded labelling is a feature of the Badass Blend range. The Mrs Red label follows the same layout as its siblings, with the flavour name, volume, nicotine content and the required warnings. Legally required information includes an age warning, ingredients, batch details and the statement that a shortfill contains no nicotine as supplied. Always read the label on the bottle in your hand rather than relying on a product page, because that is the version that applies to the batch you are using.

• Bottle type: soft plastic with a narrow dripper tip
• Cap: child-resistant and tamper-evident
• Extra headroom: the bottle is larger than the liquid volume so a shot can be added
• Labelling: includes the required health warning and 18+ notice

Storage matters more than most people expect. Keep the bottle upright, away from direct sunlight and heat, and tightly capped. Heat and light degrade flavourings and darken liquid over time, and a bottle left on a sunny windowsill or in a car will age faster than one stored in a drawer. A cool, dark cupboard is ideal. Always keep e-liquid out of the reach of children and pets, and never decant it into unlabelled containers.

If you mix a nicotine shot into the bottle, it is sensible to label the bottle with the new strength and the date, using a marker or sticker. This avoids confusion if you own several bottles, and it protects anyone else in the household from picking up a nicotine-containing bottle by mistake.

Finally, packaging should arrive intact. If a bottle is cracked, the seal is broken or the label is missing, do not use it. Contact the shop with your order number and a photo, and see the delivery and returns answers in the FAQ section.

Battery, charging and device pairing

An e-liquid has no battery of its own, so charging concerns belong to the device you pair it with. That said, the battery in your kit has a direct influence on how Mrs Red tastes and how long a day of vaping lasts, so it is worth treating the pairing properly.

Shortfills like this are designed for devices that draw meaningful power. A sub-ohm tank on a regulated box mod or a mid-power pen kit will normally run somewhere between about 30W and 80W, depending on the coil. At those power levels, the battery drains faster than it would with a low-power pod kit. If you run a single internal battery, expect to recharge once a day or more with regular use. Kits using removable 18650 or 21700 cells let you carry a spare so that you can swap and keep going.

• Internal-battery pen kits: convenient and compact, charged via USB-C on most current models; plan on a daily top-up
• Box mods with removable cells: flexible and easy to run for a full day with a spare battery
• Low-power pod kits: a poor match for a thick shortfill unless the kit is explicitly rated for high-VG liquid

Charging safely is not optional. Use the cable supplied with your device or a reputable replacement, avoid charging overnight on a soft surface, and do not leave batteries in a hot car. If you use removable cells, keep them in a case, never loose in a pocket with keys or coins, and replace any cell with a torn wrapper. Pay attention to the maximum continuous discharge rating of the cell against the power your coil demands.

Battery life also affects flavour consistency. When a battery is nearly empty its output can sag, so the coil heats less effectively and the flavour thins out. If Mrs Red seems muted late in the day, a recharge may fix it before you suspect the liquid or the coil.

When a battery, cable or device reaches the end of its life, do not put it in the household bin. Lithium cells are a fire risk in waste collection vehicles. Take them to a battery recycling bin at a supermarket or a household waste recycling centre, and dispose of vaping devices through electrical waste (WEEE) drop-off points. Many UK retailers that sell vaping products are required to take back small electrical items, so ask in store if you are unsure. Empty plastic e-liquid bottles can usually go in household plastic recycling once rinsed and fully empty, but check your local council's guidance.

Coil and mesh tech: matching resistance and wattage

Coil choice is the single biggest factor in how a high-VG shortfill behaves. A coil is the heating element and the wicking material in a replaceable head. The two main families you will meet are traditional wire coils with cotton wicking, and mesh coils, which use a flat sheet of metal mesh with a cotton or organic wicking layer behind it. For thick liquids, mesh has become popular because the large surface area heats evenly and wicks quickly.

Mrs Red is suited to sub-ohm style coils, usually from about 0.15 to 0.6 ohm. Lower resistance means more power, more vapour and faster liquid consumption. Higher resistance means gentler, cooler vaping and better efficiency. Your tank's coil packaging prints a recommended wattage range, and you should always start at the lower end of that range, then raise it in small steps until the flavour is where you like it.

• Low power (around 40 to 50W with a suitable mesh coil): cooler vapour, cleaner flavour and slower liquid use; a sensible starting point
• Mid power (around 50 to 65W): fuller flavour and denser vapour, with a warmer draw
• High power (65W and above): big vapour and heat, faster liquid use, and a higher chance of burnt notes with a sweetened fruit liquid

These bands are general guidance rather than a rule for every coil. A coil's own printed range always overrides a generic number from an article. If you are using a 0.8 ohm or higher coil in a tank that supports restricted lung inhalation, treat the liquid as a thicker-than-usual choice and consider choosing the lowest nicotine strength.

Breaking in a new coil. Fit the coil, prime the wicking holes with a few drops of liquid, fill the tank, and wait five to ten minutes. Take a few gentle, low-power puffs first, then increase to your target wattage. This prevents the cotton scorching on the very first draw, which is the most common cause of a burnt taste on a new coil.

Coil lifespan. Sweetened fruit liquids leave more residue on the coil than lighter flavours. Depending on power and usage, a coil can need replacing as often as weekly, or it might last two or three weeks at lower wattage. Signs of an ageing coil include a muted or sweet-burnt taste, gurgling, and a darkening of the cotton visible through the wicking holes.

Pod systems are a different matter. Some modern pod kits accept 0.6 to 1.0 ohm pods and handle 70VG liquids reasonably well, but many are tuned for nicotine salts at 50VG or lower. If you plan to use Mrs Red in a pod kit, check that the manufacturer lists support for high-VG liquid before buying.

Nicotine strength guidance and shot maths

Mrs Red arrives at 0mg. This section explains how to move from 0mg to a nicotine-containing strength safely and how to choose a level that fits your habits. It is general information for adult vapers, not medical advice, and anyone with questions about nicotine should speak to a pharmacist or healthcare professional.

The UK limit for nicotine in e-liquid is 20mg/ml, and nicotine-containing bottles are limited to 10ml. A nicotine shot is a 10ml bottle of high-strength nicotine in a PG/VG base, typically sold at 18mg/ml or 20mg/ml. You pour the shot into the headroom of your shortfill, close the cap and shake to blend. The maths is simple: the total nicotine in the shot is spread across the whole new volume.

• 50ml of 0mg plus one 10ml shot at 18mg/ml: 60ml total at 3mg/ml
• 50ml of 0mg plus one 10ml shot at 20mg/ml: 60ml total at about 3.3mg/ml
• 50ml of 0mg plus one 10ml shot at 10mg/ml: 60ml total at about 1.7mg/ml
• 40ml of 0mg plus two 10ml shots at 18mg/ml: 60ml total at 6mg/ml (this requires removing 10ml of base first, so only do it if you can measure accurately)

Choosing between these depends on how you vape. A rough, general guide used by many shops is as follows. A 0mg mix suits flavour-only users and anyone who has already stepped down. A 3mg mix is the usual choice for adults moving from lighter smoking habits to a sub-ohm device. A 6mg mix is common for adults who previously smoked more heavily and find 3mg unsatisfying in a restricted draw. Few sub-ohm users need more than 6mg, because large airflow delivers more liquid per puff.

If you feel dizzy, queasy or get a racing heart after vaping, stop, drink water and step down in strength. These are signs of too much nicotine. If you are unsure which strength is right for you, start low. It is easy to add nicotine later but impossible to take it out of a bottle once mixed.

Remember that nicotine salts and freebase nicotine are different forms. The shots sold for shortfills are freebase and are meant for larger, high-VG setups. Nicotine salts, which are usually used at 10mg to 20mg in small pod devices, should not be added to a shortfill to hit those levels. The resulting concentration would be far too high for a sub-ohm tank.

Finally, nicotine is addictive. Vaping is intended for adults who already smoke or vape, and anyone under 18 must not buy or use these products.

Who Mrs Red is for, and who should look elsewhere

Every product suits some vapers better than others. This section is deliberately honest so that you can decide quickly.

Mrs Red is a good fit if you:

• own a sub-ohm tank, mesh coil tank or high-VG compatible device and want a larger bottle at a modest cost per millilitre
• enjoy sweet, fruit-forward flavours and prefer them without menthol
• vape at 0mg, or at a low strength of about 3mg to 6mg after adding a shot
• go through a lot of liquid and want to refill less often than you would with 10ml bottles
• like trying several flavours from one range, since the Badass Blend line includes multiple variants at the same format

You should probably look elsewhere if you:

• use a small pod kit that only accepts nicotine salts at 50VG or lower, because a thick 70VG liquid may wick poorly
• want a high nicotine strength of 12mg or above in a ready-made bottle; a shortfill is the wrong format, and a 10ml nic salt or high-strength freebase bottle is a better route
• dislike sweet liquids, or want a tobacco, menthol or dessert style instead of a fruit profile
• prefer the convenience of a disposable and do not want to handle tanks, coils or shots
• are under 18, or do not already use nicotine products and are looking to try vaping out of curiosity

If you currently smoke and are curious about vaping, a 50ml shortfill is not usually the easiest first step, because mixing a shot and managing a sub-ohm tank adds steps. Many adults start with a simple pod kit and ready-mixed 10ml liquid, then graduate to a shortfill setup once they have settled on a flavour and strength. Our team can point you towards starter kits if you ask.

If you are shopping for a household with more than one vaper, a shortfill can be economical but also requires care: label bottles clearly, and do not leave nicotine-containing mixes next to nicotine-free ones, since they look identical.

How to use: adding a nicotine shot and filling your tank

Using a shortfill takes a few minutes of preparation the first time and becomes routine quickly. Follow the steps below in order and work over a clean surface with good light.

Before you start, check that you have the Mrs Red bottle, a nicotine shot if you want nicotine, and a clean tank with a suitable coil installed.

• Step 1, decide on your strength. Choose 0mg (no shot), 3mg (one 18mg shot) or another level from the maths above.
• Step 2, open the bottle. Press and turn the child-resistant cap, then remove the nozzle plug if your bottle has one.
• Step 3, add the shot. Squeeze the full contents of the 10ml shot into the headroom. Do not overfill; the bottle is sized for exactly this.
• Step 4, close and shake. Reseat the nozzle, close the cap firmly and shake the bottle for at least 30 seconds, turning it upside down a few times to blend.
• Step 5, let it settle. Wait several hours, or overnight if you can, so the nicotine blends fully. You may notice small bubbles, which are harmless.
• Step 6, fill the tank. Remove the tank top cap, tilt the tank slightly, and gently squeeze liquid down the side of the central chimney, avoiding the airflow tube. Stop before the maximum fill line.
• Step 7, wait and prime. Let the coil soak for five to ten minutes before your first puff.
• Step 8, vape at low power first. Take a few gentle puffs, then raise to your usual wattage.

Never fill the tank above the maximum line, and never block the central airflow tube with liquid, because this causes leaking through the airflow slots. Wipe any spills off the tank threads before reassembling, so the seals sit cleanly.

Shake the bottle gently before each refill for the first few days after adding a shot. A properly mixed bottle stays consistent, but a quick turn before pouring does no harm.

Store the opened bottle upright with the cap on. Once you add a nicotine shot, finish the bottle within a reasonable period, as most e-liquids keep best for a few months after opening, and sooner if exposed to heat or light. A nicotine-free mix is less sensitive to ageing but still benefits from careful storage.

Dispose of empty bottles and shots responsibly. Rinse empty plastic bottles, let them dry, and check whether your local council accepts them with household plastics. Nicotine shot bottles often contain residue, so treat them with care and keep them away from children until they are fully disposed of.

Troubleshooting common problems

Most problems with a shortfill setup have simple causes. Work through the likely culprits before deciding that the liquid or the kit is faulty.

• Dry or burnt taste. Usually caused by a coil that is not fully saturated or has reached the end of its life. Prime a new coil properly, wait after refilling, reduce wattage, and take shorter puffs. If the taste persists with a fresh coil, lower the power further.
• Gurgling or spitting. Typically a sign of too much liquid around the coil. Check that you have not overfilled the tank, tilt and wipe the chimney, and open the airflow slightly. Some tanks gurgle when the coil is flooded, which usually clears after a few puffs.
• Leaking from the airflow slots or fill port. Often the result of overfilling, loose threads or a damaged seal. Disassemble, dry all parts, check the silicone rings and reassemble firmly but without forcing.
• Muted flavour. Sweet fruit liquids can coat a coil quickly. Replace the coil, check that the battery is charged, and make sure you have not accidentally lowered the wattage. A change of tank is rarely needed.
• Throat harshness after adding a shot. The mix may be too strong for your device, or the shot may not be fully blended. Shake again, wait, and consider using a lower-strength shot next time.
• Liquid seems too thick to wick. A high-VG liquid can struggle in very small or very high-resistance coils. Use a sub-ohm mesh coil, or move to a lower-VG liquid for pod kits.
• Bubbles or cloudiness after mixing. Normal after shaking. They settle within a few hours and do not affect the liquid.
• Strange smell or colour change. Liquid darkens slightly with age and warmth, which is not usually a problem. A sharp chemical smell, however, is a reason to stop using the bottle.

For hardware faults, such as a device that will not fire or charge, consult the manufacturer's instructions first. Inspect the 510 connection and the battery contacts for liquid residue, which can interrupt the connection. A quick wipe with a dry cloth or cotton bud often solves it.

If you have tried these steps and the issue remains, contact the shop with your order number, the device model and a description of the problem. A photo helps. Our customer service team can usually confirm whether it is a hardware or liquid issue and advise on the next step.

Value for money and how it compares with other 50ml shortfills

Value in a shortfill is not just the price on the label. It includes how long the bottle lasts, how consistent the flavour is, how much it costs per millilitre and whether the liquid works in the hardware you already own. Mrs Red is listed at the entry end of the price range for 50ml shortfills, and the exact live price is shown on this page. To work out your cost per millilitre, divide the price by 50 and compare it with whatever you currently pay for 10ml bottles.

A 50ml bottle holds the equivalent of five 10ml bottles, so a single order can cover several weeks for a typical sub-ohm user. Heavy users may get through 5ml to 10ml a day at higher wattage, which makes a 50ml bottle last five to ten days. Lighter users at low power can stretch it to a few weeks. The bottle is also easy to mix with a shot, so one purchase gives you a ready supply at your chosen strength.

How it compares in general terms. Entry-priced shortfill ranges like Badass Blend are built for approachable, everyday vaping. They tend to offer straightforward flavour profiles, consistent quality and low cost per bottle. Premium boutique shortfill brands, which are priced higher, often use more complex recipes and slightly more refined ingredients, and some vapers feel the extra cost is worth it for layered flavours. Neither approach is wrong; it depends on how much you value subtle detail compared with price.

• Against other low-cost 50ml ranges: flavour quality is broadly comparable, so choose by flavour preference and what is in stock
• Against premium dessert and boutique shortfills: expect a simpler recipe in exchange for a lower price
• Against 10ml nic salts: a nic salt in a small pod kit gives a stronger throat hit and a more discreet vape, but costs more per millilitre and does not suit large tanks
• Against disposables: a shortfill needs a tank and a battery device, but over time it usually costs less per day of vaping and produces less electrical waste

The same Mrs Red flavour name also appears in the Ohm Brew nic salt format as a separate listing. If you own a compact pod kit rather than a sub-ohm tank, that is the format to look at. The two products share a name but are different liquids built for different hardware, so do not swap them.

Buying and delivery. VapeShopOnline ships across the UK, with free UK delivery on orders over £20 and dispatch the same day when your order is placed before 4pm. Products are sourced from genuine suppliers. A date of birth check applies at checkout, and orders are for adults aged 18 and over only. Combining several flavours from the Badass Blend range in one order is an efficient way to pass the free delivery threshold.

Recycling. Empty plastic bottles go in household plastic recycling if your council accepts them. Batteries and vaping devices must go to proper drop-off points, not the general bin.