Geekvape E100 Kit Rainbow

Overview

The Geekvape E100 Kit Rainbow by Geekvape in Rainbow at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Geekvape E100 Kit overview

The Geekvape E100 Kit is a reusable, refillable vape kit built around a rechargeable battery, a swappable pod and a replaceable coil. Geekvape is a long-established hardware maker best known for its Aegis range of rugged devices, and the E100 sits in the more compact, carry-everywhere part of its catalogue. The '100' in the name points to a maximum output in the region of 100W, which tells you who the kit is for: someone who wants more control and more headroom than a basic auto-draw pod stick offers, without stepping up to a full box mod with removable cells and a tank to build and maintain.

This page is a plain-English guide to what the kit does, who it suits and where it falls short. We have kept the claims grounded. Where a figure depends on the batch or the regional edition, we say so, and you should treat the product listing and the printed box as the final word on exact numbers. What we can do here is explain what those numbers mean in daily use, which is the part spec sheets usually leave out.

A note on the UK context, because it shapes the whole market. Single-use vapes have been banned for sale in the UK since 1 June 2025, which has pushed most adult vapers towards refillable kits like this one. Refillable devices are also subject to UK rules on pod and tank size (2ml maximum) and on e-liquid strength (20mg/ml nicotine maximum). The E100 is designed for that environment. You fill it from a bottle, you recharge it over USB-C, and when the hardware reaches the end of its life you take it to a proper drop-off point instead of putting it in the bin.

What this guide covers:

• The specifications that matter, and how to read them without being misled by puff-count marketing
• Performance, vapour delivery and how the kit behaves at different power settings
• Flavour: how the coil shapes taste, and which e-liquid profiles pair well with it
• Design, build quality, battery life, charging and recycling
• Pods and coils, nicotine strength, setup, troubleshooting and value for money
• Honest comparisons with rival kits, including when you should buy something else

If you are moving over from disposables, read the nicotine strength and setup sections before your first fill. If you already use a refillable system, skip ahead to the coil, performance and comparison sections.

Specifications and what the numbers mean

Specifications are only useful if you know how to read them. Here is how the E100 breaks down, with the practical meaning of each figure. Exact values can differ slightly between production batches and regional editions, so confirm against the product listing and the box before relying on any single number.

• Output ceiling: the name points to roughly 100W maximum. Most vaping happens far below the ceiling. The headroom matters because a device that is not working near its limit tends to run cooler, hold its voltage better and behave more consistently as the battery drains.
• Battery: a built-in rechargeable lithium cell charged over USB-C. Compact devices in this class commonly carry somewhere between 1,500mAh and 3,000mAh. Check the listing for the exact figure on your variant.
• Pod capacity: UK rules limit refillable pods and tanks to 2ml, so UK-market pods hold up to 2ml. Larger pods exist in other countries but should not be sold here.
• Coil: a replaceable coil head. Geekvape's current pod systems favour mesh-style coils, with resistances for kits in this class typically sitting between about 0.2 and 0.8 ohm depending on the coil you choose.
• Nicotine: accepts standard e-liquid up to the UK limit of 20mg/ml. Both nicotine salt and freebase liquids work, with some caveats covered in the nicotine section.
• Activation: devices in this class use a draw sensor, a fire button, or both. Check your variant's manual so you know which you have.

A worked example for battery life. A 2,000mAh cell at a nominal 3.7V stores about 7.4Wh of energy. If you vape at an average of 25W and lose roughly 15 per cent to conversion losses, you get around 6.3Wh of usable output, or about 15 minutes of total firing time. At three seconds a puff that is roughly 300 puffs per charge. Move to 40W and the same battery gives you closer to 190 puffs. Move down to 15W and it stretches past 500. Your own result will fall inside that kind of range, and it is a far more honest guide than a headline number.

Puff counts. Disposable vapes were sold on large puff claims, but those figures never translated neatly into real life, and refillable kits do not have a manufacturer puff rating at all. How many puffs you get from one 2ml pod depends on power, coil resistance and how long you draw. As a rough guide, a mouth-to-lung style setup at low wattage can stretch a 2ml fill across about 150 to 250 puffs, while a more open, higher-wattage setup will use the same 2ml in perhaps 70 to 120. Treat these as ballparks, not promises.

Resistance and wattage together. Lower resistance coils draw more current at a given wattage and produce a warmer, denser vapour. Higher resistance coils run cooler and tighter. Each coil is rated for a wattage window, usually printed on the coil head or its packaging. Stay inside that window. Running a coil above its rated range scorches the cotton and shortens its life, and running it far below the range gives a weak, airy vape that tastes flat.

Performance and vapour delivery

The point of a kit with a high output ceiling is not to run it flat out. It is to give you a wide, usable range, so one device covers a restrained, tight draw on a quiet afternoon and a fuller, warmer pull when you want it. In practice, the E100 is a device you tune rather than one you simply pick up and puff.

At the low end of a coil's wattage window you get a cooler vapour, a firmer throat hit and less cloud. This is where most former smokers settle, particularly with nicotine salt liquids at higher strengths. The draw feels closer to a cigarette, flavour is concentrated, and you use less liquid and less battery. At the middle of the window the vapour warms up, flavour opens out and cloud increases noticeably. At the top of the window you get dense, warm vapour and the most output, but battery drain rises sharply and liquid consumption climbs with it.

Because the pod holds only up to 2ml in the UK, running at the top of the range is a trade-off. A small reservoir and a hungry coil can drain a fill quickly, and a coil that outpaces its wicking will start to taste dry or scorched. If you find yourself refilling twice in an afternoon, the answer is usually to drop the power by five or ten watts rather than to refill faster.

What to expect from the draw:

• Ramp-up: a well-built chipset delivers power almost immediately, so there is little delay between pressing the button or drawing and feeling the vapour.
• Consistency: output should stay steady from a full charge down to the low-battery stage. If a device sags badly in its last quarter, it is usually a sign you are running too high for the cell size.
• Airflow: adjustable airflow, where fitted, lets you shift between a restricted mouth-to-lung draw and a looser lung inhale. A tighter draw boosts flavour and throat hit, while an open draw cools and thins the vapour.
• Throat hit: controlled by nicotine strength and VG/PG ratio far more than by the hardware. PG-heavy liquids hit harder, VG-heavy liquids are smoother.

It is worth being straightforward about what a pod-sized device cannot do. It will not match a full sub-ohm tank on a large mod for sheer volume of vapour, and it is not trying to. The aim is a satisfying, adjustable vape in a body you can carry in a jeans pocket. If your priority is the largest possible cloud, a box mod and a sub-ohm tank is a different category of product. If your priority is a flexible daily device with real power available when you want it, this is the right category.

One more practical point. Wattage is not the only lever. Airflow, coil choice and e-liquid ratio all change the experience, so if a setting feels wrong, change one thing at a time. Raise the power by two or three watts, take a few puffs, and then decide. Jumping straight to a high setting is how most people end up with a burnt coil in their first week.

Flavour and the seven variants

A refillable kit has no flavour of its own. The taste comes entirely from the e-liquid you put in the pod, and the hardware's job is to deliver that flavour cleanly. This is the biggest practical difference from a disposable, and it is the reason refillable systems give you so much more choice.

The listing offers seven variants of the E100. On a hardware kit these are normally colour and finish options rather than anything that changes how the device vapes, so choose the one you like the look of. Check the variant selector on the product page for the current line-up and stock. Every variant takes the same pods and coils, and the flavour you taste will be the same whichever finish you pick.

Mesh-style coils are popular because they spread heat over a wide surface, which tends to give an even, fairly accurate rendering of a liquid's flavour with good consistency from puff to puff. They are less forgiving of very sweet, sugary liquids, which can build up residue faster, but they reward a well-made liquid with clean, defined flavour.

Flavour profiles that tend to suit a kit like this:

• Menthol and mint: cool, clean and easy for a mesh coil to render. A reliable choice for ex-smokers and for anyone wanting a crisp finish.
• Blue raspberry: sweet and tangy with a slightly candied edge. Works well at moderate wattage, but sweet profiles will shorten coil life a little.
• Strawberry ice: a bright fruit note with a cooling finish. Fruit and ice blends are among the most popular profiles in the UK.
• Tobacco: a smooth, dry tobacco profile. Good for smokers who want continuity and do not want sweetness.
• Mango: rich and tropical. Does well at slightly higher power where the sweetness can open up.
• Cola: a familiar fizzy profile that holds up well under heat.
• Apple: crisp and slightly tart. Often paired with ice or with other fruit.
• Vanilla custard: a dessert profile. Very sweet, so use lower wattage and replace the coil sooner.

Avoiding ghosting. Cotton holds on to whatever flavour has been through it. If you switch between a menthol and a fruit liquid on the same coil, the old flavour lingers and muddies the new one. The tidy approach is to run one flavour family per coil, or to change the coil when you change profile. If you like variety, buy a pack of coils and treat them as consumable.

Choosing a VG/PG ratio. A 50/50 blend flows easily, gives a better throat hit and suits lower-power use. A 70/30 VG-leaning blend is smoother and produces more vapour, but is thicker and can starve a small coil if the wicking is not generous. If a coil is gurgling or tasting dry, a thinner liquid is often the fix. Always check the coil packaging for its recommended liquid range.

Design and build quality

Geekvape has spent years building devices that are meant to be dropped, pocketed and used every day, and that thinking shows in the E100's approach. Compact kits in this class are typically built around a metal alloy body with a coated finish, a small display or indicator, a single fire button and a pod that seats into the top of the device. The aim is something that sits comfortably in the hand and survives life in a bag or coat pocket.

What to look for when the kit arrives:

• Pod fit: the pod should seat firmly with a positive click or a magnetic hold, with no wobble. A loose pod is the most common cause of intermittent firing and leaks.
• Fire button: it should feel decisive, with a clear travel and no rattle. Mushy buttons are a sign of poor assembly.
• Finish: coated surfaces can show wear at the edges after months in a pocket with keys. That is cosmetic and normal for any coated device. A case or a separate pocket keeps it tidy.
• Charging port: the USB-C port should accept a cable without wiggle. Always use a good-quality cable.
• Leak resistance: check the airflow slots and the pod base. Wipe away any condensation after refilling.

Water and shock resistance. Geekvape's Aegis-branded devices are the ones known for dust, water and shock protection. Do not assume the E100 carries the same rating unless the product listing says so. Treat it as a regular electronic device: keep it out of rain, never rinse the body, and dry any spilled liquid from the contacts straight away.

Ergonomics. A device with a 100W-class ceiling usually runs slightly larger than a minimal pod stick, because of the cell and the circuitry. That extra size is the reason you get the extra battery life and power. It also means a slightly more comfortable grip than the very slim, pen-style devices, which many people find fatiguing over a long session.

Care. Wipe the body with a dry or barely damp cloth. Keep the pod contacts clean, since e-liquid residue on contacts is a quiet cause of misfires. Store the device upright when you can, with the pod fitted, and avoid leaving it in a hot car, where heat can degrade the battery and thin the liquid enough to leak.

Overall, you should expect a solid, well-assembled everyday device that is more robust than a typical disposable but is not designed as an outdoor, rugged tool. If you need extreme durability for work or outdoor use, look at Geekvape's Aegis line instead and check the specific ingress rating on the listing.

Battery life, charging and recycling

Battery life is the most variable part of any vape, because it depends on how you use it. As the worked example earlier showed, a built-in cell of around 2,000mAh gives roughly 300 puffs at 25W, and the figure rises or falls with your settings. Rather than trusting a headline number, think in terms of how many pods you can empty from one charge. At typical settings, most users in this class report between one and three pods per charge. A day of moderate vaping often means a charge every evening.

What affects your battery life:

• Wattage: the biggest factor. Dropping from 40W to 20W can nearly double the number of puffs per charge.
• Puff length: long draws burn through the cell far faster than short ones.
• Coil resistance: low-resistance coils pull more current to hit the same wattage.
• Temperature: cold weather reduces usable capacity. A device kept in a cold pocket in winter will show shorter run times.
• Battery age: lithium cells lose capacity gradually over hundreds of charge cycles. After a year or two of daily use, expect a noticeable drop.

Charging. The E100 charges over USB-C. Use a quality 5V charger from a reputable maker with a short, undamaged cable. Avoid unbranded fast chargers that supply more current than the device is designed for. A full charge typically takes somewhere between one and two hours, depending on the cell size and the charger. Do not leave any lithium device charging unattended overnight on a soft surface such as a bed or sofa. Place it on a hard, non-flammable surface where you can see it, and unplug it when it is done.

Using it while it charges. Many devices in this class allow pass-through use, but it is better avoided. It heats the cell, adds wear and, if the cable is loose, can cause intermittent contact. If you have run flat, give it ten or fifteen minutes on charge and then unplug it before you use it.

Safety signs. Stop using the device and take it out of circulation if the body swells, if it gets unusually hot, if it smells of burning or if liquid leaks around the charging port. Do not try to open the case or replace the cell yourself.

Recycling. Vapes contain lithium batteries and electronics, and these must not go in your household bin or kerbside recycling. In the UK, devices and batteries can be taken to a household waste recycling centre, or to a retailer that offers take-back for small electricals and batteries. Many shops that sell vape products are required to accept used equipment, so ask when you buy a replacement. Empty any remaining liquid first, remove the pod if you can, and dispose of old e-liquid bottles and pods in line with local guidance. Recycling matters because a damaged lithium cell in a bin lorry or waste plant is a genuine fire risk, which is exactly why the UK moved away from single-use vapes.

Pods and coil technology

The pod and coil are the working heart of the kit, and understanding them saves money and frustration. The pod is the reservoir that holds your e-liquid. The coil is the replaceable heating element, wrapped or packed with cotton, that turns liquid into vapour. Both are consumables, but they wear at very different speeds.

How a mesh coil works. Instead of a round wire wrapped around a cotton wick, a mesh coil uses a thin sheet of metal mesh pressed against the cotton. Because the heating surface is wider, the liquid is warmed more evenly, which reduces hot spots, helps flavour consistency and speeds up the response when you press the button. The trade-off is that the cotton behind the mesh is thinner and can dry out if you chain-vape or run the power too high.

Priming. A new coil needs time for the cotton to soak up liquid. After fitting a fresh coil and filling the pod, wait five to ten minutes before your first puff, and take two or three gentle draws without firing to pull liquid into the wick. Skipping this is the cause of most burnt first hits and most short-lived coils.

How long does a coil last? It varies. As a rough guide, coils in this class last between one and three weeks of regular use, and sweeter, thicker liquids at higher power are at the shorter end. Signs that a coil is nearing the end:

• Flavour turns flat, muddy or faintly burnt even with a fresh fill
• Vapour production drops at the same power setting
• You get gurgling or spitting that did not occur before
• The throat hit changes, or you notice a sharp, acrid edge

Replacing the coil. Pull the pod, remove the coil head, fit a new one and prime it. Always use coils intended for this pod. Mixing coil types can lead to poor contact, leaks or wrong resistance readings. Buy coils in multi-packs for better value, and keep spares so you do not have to vape a dying coil while waiting for a delivery.

Looking after the pod. Rinse the pod in warm water every few refills, shake out the water and let it dry completely before refilling. Never rinse a coil head. Replace the pod if it develops cracks, because a cracked pod leaks and can let air in where it should not. Fill only up to the maximum line, and keep the fill hole clear of the central airflow tube to avoid flooding the coil.

Why it matters in the UK. The 2ml pod limit means you will refill more often than you would on a large tank. Get used to carrying a small bottle of e-liquid, and keep the pod filled rather than letting it run dry. Running a coil dry is the quickest way to ruin it, because the cotton scorches and cannot be saved.

Nicotine strength guidance

In the UK, nicotine e-liquid is capped at 20mg/ml (2 per cent), and bottles are limited to 10ml. This applies to refillable e-liquid as well as pods and was the standard that disposables followed before they were banned. The cap is a ceiling, not a recommendation. Most adult vapers do better on something lower, and the right choice depends on how much you smoked, what type of liquid you use and how hard you draw on the device.

Nicotine salt versus freebase. Nicotine salt liquids are smoother at high strengths and deliver nicotine more quickly, which is why they are the usual choice at 10mg and 20mg. Freebase nicotine is harsher at high strengths, so it is normally used at 3mg to 6mg in larger-volume, lower-resistance setups. For a pod-sized kit, nicotine salts are the natural starting point, with freebase worth considering if you run the device at higher power.

A starting guide for adults who smoke:

• 20mg/ml nic salt: for heavy smokers, roughly 20 or more cigarettes a day, or anyone who finds lower strengths leave them reaching for a cigarette. Best used at lower wattage with a tight draw.
• 10mg to 12mg/ml nic salt: for moderate smokers, roughly 10 to 15 a day, or as a step down from 20mg.
• 5mg to 6mg/ml: for light smokers, or for people who have stepped down and want a gentler throat hit.
• 3mg/ml freebase: for people who vape for the habit more than the nicotine, or who use higher wattage and longer draws.
• 0mg: for people who want to continue the ritual without nicotine, usually as the last step of a reduction plan.

Why power matters. A device that produces more vapour per puff also delivers more nicotine per puff. If you move from a low-power setting to a high one without changing the strength of your liquid, you are effectively taking in more. That is why a kit with a 100W-class ceiling often calls for a lower nicotine strength than a basic pod stick would. If you run the E100 at the upper end of its power range, step the strength down.

Signs the strength is too high: dizziness, nausea, headache, a racing heart, a harsh throat hit or a sense of feeling unwell after a few puffs. If you have any of these, stop and drop to a lower strength. Signs it is too low: chain-vaping, constant cravings and returning to cigarettes. Raise the strength a step instead of pushing the wattage up.

The aim for most users is to stay on the lowest strength that stops you from smoking, then reduce gradually over time. If you want help, the NHS and local stop-smoking services offer support, and a vape kit works best as part of a plan. This guide is general information and not medical advice. Vaping is not risk-free and is intended for adults who smoke or already vape. If you do not smoke, do not start. Nicotine products are for people aged 18 and over.

Who the E100 suits and who should skip it

No kit suits everyone. Here is an honest breakdown of who gets the most from the Geekvape E100 and who is better served elsewhere.

The E100 makes sense if you are:

• A smoker or recent switcher who wants a controllable device: adjustable power lets you start low with a strong nic salt and adjust as your habit changes.
• A disposable user moving to refillable: since single-use vapes can no longer be sold in the UK, a kit like this is the logical next step, and it works out cheaper over time.
• A vaper who has outgrown a basic pod stick: if you find fixed-output pods thin or short on battery, extra headroom and a bigger cell are useful upgrades.
• Someone who wants one device for varied use: a quieter mouth-to-lung draw in the morning and a warmer, fuller pull later in the day, all from the same device.
• A person who values flavour choice: because you pick the e-liquid, you are not tied to one manufacturer's flavour range.

You might want to skip it if you are:

• Looking for the simplest possible vape: if you want to pull a stick from your pocket with no filling, no priming and no coils to replace, a closed pod system with pre-filled cartridges is easier.
• Chasing the biggest possible cloud: a 2ml pod device is limited by its reservoir and size. A sub-ohm tank on a larger mod is the right tool for that.
• After a ruggedised outdoor device: unless the listing confirms a water and shock rating, look at a purpose-built tough device instead.
• On the tightest possible budget: kits cost more upfront than a pack of basic pods, and while the running cost is lower, the initial outlay is higher.
• Uncomfortable with maintenance: you will need to refill, prime, rinse and replace coils. It is not difficult, but it is not zero effort.

Who should not use a vape at all. Nicotine vapes are for adults aged 18 and over, and specifically for adults who smoke or already vape. They are not for non-smokers, young people, or anyone who is pregnant unless advised by a healthcare professional. If you have a heart condition or other health concerns, speak to a doctor or pharmacist before switching.

If you fall into the first group, the E100 is a sensible, adjustable kit that will do the job for years with sensible care. If you fall into the second, be honest with yourself about the trade-offs before you buy.

Setting up and using the kit

Setup takes about ten minutes, most of which is waiting for the coil to prime. Follow these steps for the best first impression and the longest coil life.

• Step 1, unbox and inspect. Check that the body, pod, coil and charging cable are all present, and look for cracks or damage. Read the quick-start card for the exact button commands on your variant.
• Step 2, charge first. Give the battery a full charge over USB-C before the first use. This sets a good baseline and avoids low-battery errors at the start.
• Step 3, fit the coil. If the coil is not already installed, push it firmly into the pod base until it is fully seated. A half-seated coil leaks and misfires.
• Step 4, fill the pod. Open the fill port, tilt the pod and run the liquid down the inside wall to avoid air bubbles. Stop at or below the max line. Do not fill into the central tube.
• Step 5, wait. Leave the pod to stand for five to ten minutes so the cotton soaks through. This is the single most important step for coil life.
• Step 6, fit the pod. Seat the pod in the device until it clicks into place.
• Step 7, power on. Many devices in this class turn on with five quick presses of the fire button, but follow the manual for your variant. A display or LED will confirm that it is on.
• Step 8, set a low power. Start at the low end of your coil's wattage range, then increase in small steps until the flavour and warmth suit you.
• Step 9, take gentle first puffs. Short, slow draws first, then settle into your normal pace.

Everyday handling. Refill when the liquid drops to about a quarter of the pod. Letting it run completely dry risks a dry hit and damages the cotton. Keep the device upright when stored. If your device has a lock function, switch it on before putting the kit in a bag or pocket, to prevent accidental firing. Most devices use a repeated press of the fire button to lock and unlock.

Changing coils. When the flavour fades, pull the pod, swap in a fresh coil, fill and wait the full priming time again. It is quicker than it sounds once you have done it a couple of times.

First-time liquid advice. If you are coming from disposables, start with a nicotine salt liquid in a 50/50 or 60/40 blend at 10mg or 20mg, depending on your smoking habit. Keep the wattage low. Once you are comfortable, experiment with power and airflow.

Travel. Carry liquid in its original bottle, tightly closed, in a sealed bag. Lithium batteries and vapes should go in your hand luggage, not in checked baggage, when flying, and you should check the airline's rules on use and carriage before you travel.

Troubleshooting common problems

Most issues with refillable kits have simple fixes. Work through the likely causes in order before assuming the device is faulty.

• The device will not turn on or fire: check the battery first. Charge it for at least fifteen minutes. If it still will not respond, confirm you are using the correct on-off sequence for your variant. Clean the pod contacts with a dry cotton bud, since residue is a common cause of poor connection.
• The device reports a coil or pod fault: remove the pod, check that the coil is fully seated, and refit. Wipe the contacts. If the message persists with a new coil, try a different pod in case the first is damaged.
• A burnt taste: usually a dry coil. The causes are an unprimed coil, running the pod too low, chain-vaping, or power set too high. Refill, wait, drop the wattage and try again. If the burnt taste persists after a fresh fill and priming, replace the coil.
• Leaking from the pod or device: check the fill level, since overfilling is the commonest cause. Check that the coil and pod are seated properly, and that the pod is not cracked. Avoid leaving the device in a hot place, and store it upright. Clean away residue before use.
• Gurgling or spitting: condensation or flooded airflow. Blow gently through the mouthpiece to clear the airway, wipe it dry and drop the power slightly. Thinner liquids reduce the problem.
• Weak or flat flavour: the coil is likely worn, or the power is too low. Try a small increase first. If that does not help, replace the coil. Also check that you are not mixing flavours on the same coil.
• Dry hits with liquid still in the pod: the coil is not wicking quickly enough. Lower the power, use a thinner liquid or let the coil rest. If it persists, the coil is probably spent.
• Short battery life: lower the wattage, check the cell is not ageing, and avoid use in cold conditions. Charge fully and let the battery run down before recharging occasionally.
• The device will not charge: try a different cable and a different charger. Check the port for debris and clean it with a dry wooden toothpick, never metal. If it still fails, contact the retailer.
• The pod feels loose: clean the contact area and check for pod damage. A pod that is persistently loose should be replaced.
• Hot device: stop using it immediately, let it cool and lower the power. If it heats up unusually quickly, stop using it altogether and contact the retailer.

When to contact support. If you have tried a fresh coil, a fresh pod, a clean contact, a different cable and still have a fault, the device may be defective. Keep your order details and photos of the fault, and contact the retailer promptly. Consumer rights in the UK give you protection for goods that are faulty or not as described, so you do not need to put up with a defective device.

Value for money and how it compares

The sticker price of a kit is only part of the story. To judge value, look at running costs over a few months and compare them with what you would otherwise spend.

Working out the cost. Take the kit price and divide it across the months you expect to use it. Add the cost of coils, which you replace every one to three weeks, plus pods when needed. Then add e-liquid. A refillable bottle usually costs far less per millilitre than the equivalent in disposable form, and because you refill from a bottle, there is no throwaway device each time. Prices change, so check current figures on the shop. The pattern holds, though: refillable systems cost more on day one and less on day sixty.

For someone who used to buy disposables every few days, a switch to a refillable kit typically pays for itself within the first month or two. For someone who vapes lightly, the saving is smaller but the environmental benefit is still real, since you are no longer producing a steady stream of electronic waste.

Comparing with rival kits. The pod-mod space is crowded, and several rivals are worth knowing about. In general terms:

• Vaporesso XROS range: usually smaller and simpler, with a strong following among mouth-to-lung users. A good fit if you want something minimal. The E100 offers more headroom and a larger power range, at the price of more bulk.
• Voopoo Vinci and Argus families: comparable adjustable pod mods with their own coil systems. These are close competitors and the decision often comes down to coil availability, design preference and price.
• Smok Nord and Novo ranges: widely stocked with a very broad coil catalogue. A solid choice for people who like having many resistance options and easy availability of replacements.
• Uwell Caliburn range: a simple, approachable system aimed squarely at beginners and mouth-to-lung vapers. It is easier to use but gives you less room to grow.
• OXVA Xlim family: a popular, compact option with good flavour. Choose it when pocket size is the priority.

None of these is universally better. Which suits you depends on how much power you want, how big a device you will tolerate and which coils are easy to buy where you live. The E100's case rests on its adjustability and battery headroom, so if you do not plan to use either, a simpler kit may serve you just as well and cost less.

Other things worth weighing. Check how easy it is to buy replacement coils and pods before you commit, because a kit is only as good as its consumables are available. Look at the warranty terms, the shop's returns policy and the quality of the customer support. A lower price from an unknown seller is no bargain if you cannot get a replacement coil in three months.

Our verdict. For adults who smoke or already vape and want a flexible, rechargeable, refillable device with room to adjust, the Geekvape E100 Kit is good value when you factor in running costs. For people who want the simplest possible experience or the biggest cloud, other products fit better. Buy it for the control, not for a headline number.