Slush Brew by Ohm Brew 10ml

Overview

The Slush Brew by Ohm Brew 10ml by Slush at 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Slush Brew by Ohm Brew 10ml at a glance

Slush Brew by Ohm Brew is a 10ml e-liquid sold on vapeshoponline.co.uk for adult vapers who want a chilled, slush-style flavour in the standard UK refill bottle size. It is listed under the Slush name and credited to Ohm Brew, and it is made to be poured into a refillable pod, tank or other compatible device rather than used straight from the bottle. Ten millilitres is the largest container UK rules allow for a nicotine-containing e-liquid, so you will not find this product in a bigger nicotine bottle.

This guide covers what to expect from the liquid, how it behaves in different devices, how to choose a nicotine strength, and what to do when something goes wrong. Where we describe general behaviour, such as puffs per millilitre or coil pairing, we are giving working estimates based on how 10ml liquids of this type usually perform, not lab-tested figures for one specific batch. Always check the product page for the exact flavour name, nicotine strength and VG/PG ratio of the variant you are buying, because those details differ between options and can change between batches.

• Format: 10ml bottle with a narrow nozzle designed for filling pods and small tanks.
• Product type: e-liquid for refillable devices, not a ready-to-use disposable.
• Nicotine ceiling: 20mg/ml is the UK legal maximum for nicotine e-liquid, and the same 20mg cap applies to the liquid inside any disposable vape. Many variants are sold at lower strengths.
• Base: 10ml nicotine salt liquids are commonly 50/50 VG/PG, but read the label on your chosen variant to confirm.
• Packaging: child-resistant, tamper-evident cap, with the nicotine warning and ingredient list printed on the label.
• Age: for adults aged 18 and over only. It is illegal to sell nicotine vaping products to anyone under 18 in the UK.

The rest of this page follows the order in which most buyers ask their questions: performance, flavour, bottle design, devices, strengths, suitability, use, troubleshooting, value and comparisons.

Performance and puff delivery

The most useful way to judge any 10ml e-liquid is puffs per millilitre, because bottle size alone says little about how long it lasts. On a low-power mouth-to-lung pod kit running a nicotine salt at roughly 10 to 12 watts, many vapers land at around 250 to 350 puffs per millilitre. That puts a full 10ml bottle at an estimated 2,500 to 3,500 puffs. On a direct-to-lung setup with a lower-resistance coil and higher wattage, consumption climbs sharply, often to 100 to 150 puffs per millilitre, so the same bottle delivers closer to 1,000 to 1,500 puffs. Treat these as planning figures. Your draw length, power setting and coil condition will move them in either direction.

For context, a typical 2ml single-use vape is marketed at about 600 puffs, which works out to a similar puffs-per-millilitre figure. A 10ml bottle therefore holds the equivalent of roughly five of those units, but it is poured into a reusable device rather than thrown away after one use.

In everyday use, performance shows up in four places:

• Throat hit: a nicotine salt at 20mg/ml gives a smooth but noticeable hit at low power. Lower strengths and freebase options feel gentler. Pushing the wattage up makes any strength feel harsher.
• Vapour volume: a 50/50 base produces moderate clouds suited to discreet mouth-to-lung vaping. It is not designed for large-cloud chasing, and a higher-VG base would be needed for that.
• Consistency from first puff to last: flavour should stay recognisable across the whole bottle, provided the coil is fresh and the pod is not run dry. A fading taste usually points to the coil, not the liquid.
• Warm-up and response: thinner 50/50 liquids wick quickly, so there is little delay between pressing the button or inhaling and getting vapour.

One practical point is that sweet, slush-style liquids contain more sweeteners than plain tobacco or menthol flavours. Sweeteners caramelise on the coil faster, which can shorten coil life and slowly dull flavour. That is a characteristic of the whole category, not a fault, and a routine of changing the coil every week or two keeps performance steady.

Flavour profile

The name points to the iced, sweet-drink family of flavours: a fruit-led sweetness delivered with a cooling finish, in the manner of a frozen slush drink. The specific fruit or flavour combination is shown on the label and in the variant name on the product page, so check it before ordering. What follows describes how liquids in this style usually unfold, so you know what to expect rather than being surprised on the first fill.

A slush-style profile tends to move through three stages on each puff:

• Inhale: the sweet, fruit-forward notes arrive first, often with a light sharpness that mimics the tang of a frozen drink. At low power the flavour is clean and fairly light. At higher power it becomes denser and sweeter.
• Exhale: the cooling element comes through, usually felt at the back of the throat and across the tongue. In this style the cooling is meant to read as crushed-ice freshness, not a sharp menthol blast, though intensity is a matter of personal taste.
• Aftertaste: a lightly sweet, cool residue lingers for a few seconds. Some vapers enjoy that. Others find it clings, in which case a sip of water between sessions resets the palate.

Because the flavour leans sweet and cool, it suits people who prefer dessert, candy or fruit profiles over tobacco or plain menthol. It is less suited to anyone who dislikes any cooling effect at all, since that element is part of the identity of the style. If you are sensitive to coolants, start with a lower-strength bottle at a lower wattage and see how it feels before committing to more.

Two tips improve the taste noticeably. First, let a freshly filled pod rest for at least five minutes so the coil is fully saturated; an under-soaked coil gives a muted or burnt first few puffs that unfairly colour your opinion. Second, avoid mixing this liquid with the remains of a different flavour in the same pod. Residual liquid blends in unpredictable ways, and cooling agents in particular linger in the cotton. Run the pod down, rinse it if the manufacturer allows, and let it dry before changing flavours.

Finally, expect some flavour fatigue. Sweet liquids are known for it, sometimes called vaper's tongue, where the same flavour seems to fade after a few days. Keeping a second, different flavour on hand to rotate with is a simple fix.

Bottle design and build quality

The 10ml bottle follows the usual UK format: a soft plastic body that can be squeezed gently to dispense liquid, a thin nozzle sized for common pod fill ports, and a child-resistant outer cap that must be pressed and turned to open. A tamper-evident ring on the cap shows whether the bottle has been opened. These features are required for nicotine e-liquid sold in the UK, and they are worth understanding because they affect everyday handling.

• Nozzle fit: the narrow tip suits most refillable pods, but a few wide-bore tank fill ports are easier to use with a blunt-tip bottle. If a fill port looks tight, take the time to line the nozzle up, and squeeze slowly rather than forcefully.
• Squeeze control: soft bottles give good control, but they also trap air. Squeezing, then releasing before pulling the nozzle away, helps prevent a surprise drip.
• Labelling: the label should show the nicotine strength, ingredient list, batch information and the mandatory health warning. If a label is damaged, smudged or missing, contact the shop before using the bottle.
• Light and heat resistance: the plastic is not a strong barrier against sunlight. Keep the bottle in its box or a drawer rather than on a window sill or a car dashboard.

The bottle is a consumable, so build quality is judged on whether the cap seals reliably and whether the nozzle remains leak-free during storage. Store it upright with the cap fully closed and engaged in its child-resistant position. Keep it out of the reach of children and pets at all times: nicotine liquid is hazardous if swallowed or absorbed through the skin, and any spill on skin should be washed off promptly with soap and water.

When the bottle is empty, do not pour leftover drops down the sink. Let the last of the liquid dry out with the cap off in a safe place away from children, then check your local council guidance for plastic recycling, since rules differ between areas. Batteries and electronic parts must be handled differently. Under UK waste electrical rules, shops that sell vaping devices are expected to offer a take-back service, and household waste recycling centres also accept small electricals. The Recycle Your Electricals postcode finder lists local vape-recycling drop-off points. Never place a vape device, rechargeable battery or pod kit in household rubbish or ordinary recycling, because damaged lithium cells are a known cause of fires in bin lorries and waste plants.

Battery and charging: the device side of the setup

E-liquid itself has no battery, so the charging question is really about the device you pour it into. The right kit makes a large difference to how this liquid tastes and how long a bottle lasts, so it is worth spending a few minutes on the specifics.

For a 10ml nicotine salt in a 50/50 base, the common choice is a compact refillable pod kit with a built-in rechargeable battery. Capacities in this class generally run from about 400mAh in very slim pens to around 1,000mAh in larger pod devices. A 1,000mAh battery will usually carry a moderate user through a full day at 10 to 15 watts, while a 400mAh to 600mAh battery tends to need topping up once a day or more. Larger box-style devices that use removable 18650 cells, commonly rated around 3,000mAh each, are overkill for this type of liquid and are better suited to higher-power setups.

• Charging port: most modern pod kits use USB-C. Use the cable supplied or a reputable replacement, and a standard 5V phone-style adapter or computer port.
• Charging time: small pod batteries typically need 30 to 90 minutes from low to full, depending on capacity and charge rate. Check the manual for your specific model.
• Overnight charging: avoid leaving any vape charging unattended or overnight. Charge it on a hard, non-flammable surface where you can see it.
• Pass-through use: many pods allow vaping while charging, but doing so heats the battery and is best avoided.
• Battery condition: stop using any device whose casing is swollen, hot to the touch while idle, or showing damage, and take it to a recycling point.

A note on disposables: single-use disposable vapes were banned from sale in Great Britain from 1 June 2025, and the UK nicotine ceiling of 20mg/ml applied to them just as it does to refill liquids. A refillable kit with bottled liquid is now the standard route for vapers who previously relied on disposables, and it brings an environmental benefit as well, since you keep the battery and body for many months instead of discarding them after a few days.

Matching battery size to power is also a question of taste. If you run your device at the low end of its range, you get longer battery life, longer coil life and smoother nicotine delivery from a salt. Cranking the wattage to the maximum shortens all three.

Coil and mesh technology for this liquid

The coil is where the liquid becomes vapour, and the coil you pick decides how this e-liquid tastes. For a 10ml nicotine salt in a 50/50 base, the suitable range is generally a coil of about 0.6 to 1.2 ohms for mouth-to-lung vaping, run at roughly 10 to 15 watts. Lower-resistance coils below 0.6 ohms are built for direct-to-lung use and are better paired with a higher-VG freebase liquid. Always follow the wattage range printed on the coil or in the device manual, since that range is set by the manufacturer for that specific part.

There are two main coil constructions you will meet in pod kits:

• Traditional wire coils: a wire wrapped around cotton. They are simple, inexpensive and widely available, and they give a warm vape with a steady, rounded flavour. They respond well to the lower wattages preferred for nicotine salts.
• Mesh coils: a thin sheet of perforated metal formed into a cylinder that contacts more cotton. The larger heating surface warms the liquid more evenly, which often gives faster ramp-up, a sharper flavour and denser vapour at similar wattage. Mesh coils are common in current refillable pods and are a good match for fruit and iced flavours, but they can be more sensitive to sweeteners and may need replacing a little more often.

Typical coil life with a sweet, iced liquid is about one to two weeks of regular use, though heavy users may replace coils sooner. Signs that it is time to change include a burnt or scorched taste, a muted flavour even after fresh liquid, a crackling sound that was not there before, or a coil that looks dark and crusted when you remove it from the pod.

To prime a new coil properly, follow these steps. Fill the pod to the maximum line without covering the central airflow tube. Wait five to ten minutes so the cotton soaks completely. Take three to five gentle draws without pressing the fire button, so liquid is pulled through the wick. Only then start vaping at the lowest recommended power and increase gradually. Skipping this step is the single most common cause of dry hits and burnt coils on a new setup.

Many popular refillable pod systems on the UK market take a standard range of coils at varying resistances, so check which coil your own device uses. If your device offers several resistances, the higher end, around 0.8 to 1.2 ohms, is generally the better choice for this style of e-liquid.

Nicotine strength guidance

Picking a nicotine strength is the most important decision you will make with any e-liquid. The product page lists the strengths available for this item; the guidance below explains how to choose between them. This is general information for adult smokers and vapers, not medical advice. If you are unsure, an NHS stop smoking service or a pharmacist can talk through options.

• 20mg/ml nicotine salt: this is the UK legal maximum. It is generally aimed at people who smoked around 15 or more cigarettes a day and are vaping at low power through a mouth-to-lung pod. Nicotine salts are smoother than freebase at the same strength, which is why this level is workable, but it can still feel strong to anyone who is not used to it.
• 10mg/ml nicotine salt: a common middle step for light to moderate smokers, around 10 cigarettes a day or fewer, and for people who found 20mg too intense. It is also a frequent choice for those stepping down gradually.
• Freebase options such as 3mg, 6mg or 12mg: these suit larger tanks and higher-power devices, where you take bigger, longer puffs and so inhale more liquid per draw. Lower strengths feel proportionally harsher at high wattage.
• 0mg: nicotine-free, for people who have finished with nicotine entirely and want to keep the habit and flavour.

Several rules of thumb help. First, match strength to device. A salt at 20mg/ml in a high-power sub-ohm tank delivers far more nicotine per puff than the same bottle in a small pod at 10 watts, and symptoms of too much nicotine can follow. These include dizziness, nausea, headache, sweating and a racing heart. If you feel any of these, stop vaping, drink water, get some fresh air, and choose a lower strength next time.

Second, if you are switching from smoking, consider starting with a strength that feels satisfying but not overwhelming rather than the highest available. Too little nicotine leads to chain vaping and cravings; too much leads to nausea. Many people adjust within the first week.

Third, do not combine strengths unless you understand the arithmetic. Pouring two bottles into one pod to split the difference is possible but gives uneven results and is not recommended with sweet liquids that already strain the coil.

Finally, remember that vaping is intended for adults who already smoke or use nicotine. It is not recommended for non-smokers, young people, or anyone who is pregnant or breastfeeding, who should seek advice from a healthcare professional before using any nicotine product.

Who Slush Brew is for, and who should skip it

This liquid is aimed at a clear group of adult buyers. It will not suit everyone, and it is better to know that before you order than after.

It is a good fit for:

• Adult smokers moving to a refillable pod kit who want a sweet, cool flavour that does not taste like tobacco.
• Former disposable users who now want a reusable device and need a 10ml liquid to match the fruity, iced flavours they were used to.
• Experienced vapers who like a rotation of flavours and want a modestly priced 10ml bottle to try something different without committing to a larger size.
• Anyone running a low-power mouth-to-lung device, where a 50/50 base and a nicotine salt work well together.

It is probably not for:

• Anyone under 18. It is illegal to sell nicotine vaping products to under-18s in the UK, and we will not knowingly do so.
• Non-smokers. If you do not already use nicotine, there is no health reason to start.
• People who dislike any cooling sensation. The iced element is part of the style.
• Cloud chasers who want very large vapour output. A 50/50 base is built for flavour and nicotine delivery, not volume.
• Anyone with a sensitivity to propylene glycol, which makes up around half of a 50/50 base. If you notice throat irritation or a rash after vaping, stop and seek advice.
• People who are pregnant or breastfeeding, or who have a heart condition or other medical concern, unless advised otherwise by a healthcare professional.

It is also worth being honest about the realistic alternative for each buyer. If your goal is to stop smoking, the NHS and local stop smoking services offer free support and can combine a vape with behavioural help, which significantly improves your chance of success. A liquid is a tool, and results are stronger when you set a plan: a start date, a nicotine strength you intend to reduce over time, and a backup for difficult moments.

Finally, remember that the choice is not just about the liquid but about the device. A liquid designed for low-power use will disappoint in a high-power tank and vice versa, so match the two before you judge the flavour.

How to fill and use Slush Brew

Filling a pod is simple once you have done it a few times. Follow these steps to avoid leaks, flooding and dry hits.

• Check the device first. Make sure the battery has some charge, the pod is seated firmly and the coil is not due for replacement.
• Shake the bottle gently. Even a ready-made liquid can settle slightly, so a short shake helps keep the flavour and nicotine evenly mixed.
• Open the cap. Press down and turn, as required by the child-resistant closure. Keep the bottle upright while you do it to avoid spills.
• Fill slowly. Locate the fill port, line up the nozzle and squeeze gently. Stop at or just below the maximum line. Avoid covering or flooding the central airflow tube.
• Close the port and the bottle. Wipe away any drips from the pod and the bottle neck, and re-fit the cap firmly until it clicks into its child-resistant position.
• Wait. Leave the filled pod standing for five to ten minutes so the cotton is fully saturated.
• Prime. Take a few gentle draws before pressing the fire button, then start at the lowest recommended power.

For the vaping itself, take slow, steady draws of around two to four seconds for mouth-to-lung devices. Short, light pulls give a cleaner flavour than long, hard ones. Pause between puffs so the coil can re-wet, especially when chain vaping. If you notice the flavour weakening or a hot, dry feeling, stop and check that the pod has liquid and that the wick is wet.

Storage and safety matter just as much as technique:

• Store bottles upright, in a cool, dark place, away from direct sunlight and heat sources.
• Keep all e-liquid and devices out of the reach of children and pets.
• Never refill a pod while it is charging or while the device is switched on and firing.
• If liquid gets on your skin, wash it off with soap and water. If it gets in the eyes, rinse with water and seek medical advice. If swallowed, contact NHS 111 or emergency services immediately.
• Avoid mixing nicotine liquids with any other substance, and do not add flavour concentrates or other additives to a bottled liquid.

Used within its best-before date and stored properly, a 10ml bottle typically stays in good condition for many months. Check the date printed on the label, and discard any liquid that has noticeably darkened, separated or taken on an unpleasant smell.

Troubleshooting common problems

Most problems with a refillable setup trace back to a handful of causes, and the fixes are usually quick. Work through the list below before assuming the liquid is at fault.

• Burnt or scorched taste: usually an old coil, a coil that has not been primed, or a pod that was allowed to run low. Replace the coil, prime it properly, and keep the pod above the minimum level. Sweet liquids make this more likely, so shorter coil intervals help.
• Dry hit: the wick is not saturated. Wait longer after filling, take a few unpowered draws, and lower the wattage. Do not keep pressing the button on a dry coil.
• Gurgling or spitting: too much liquid has reached the coil or the airflow channel. Remove the pod, blow gently through the mouthpiece away from your face, wipe dry, and refit. Next time, fill to a slightly lower level.
• Leaking: check the pod is fully seated, the fill port bung is closed, and the pod is not cracked. Overfilling and temperature changes, such as leaving a device in a hot car or taking it on a flight, are common triggers. Store devices upright.
• Weak or flat flavour: change the coil first. If the new coil also tastes muted, you may be experiencing vaper's tongue. Switch to a different flavour for a few days, drink water and avoid strong food or drink just before vaping.
• Harsh throat hit: the wattage may be too high or the strength too strong. Reduce power, or move to a lower nicotine strength.
• Dizziness or nausea: this can indicate too much nicotine. Stop vaping, sit down, drink water and eat something. Choose a lower strength next time.
• Sticky residue on the device: sweeteners and glycerine can leave a film. Wipe the exterior with a dry or very slightly damp cloth, allow it to dry, and clean the metal contacts with a dry cotton bud.
• Device will not fire: this is a hardware issue, not a liquid issue. Check the battery charge, that the pod is clicked in properly, and that the contacts are clean. If it still fails, refer to the device manufacturer.

If none of the above helps, keep the bottle, note the batch number on the label and contact our customer service team with a description and, where relevant, a photo. We can check whether the issue relates to the liquid or the setup. Do not continue to use a liquid that smells off, looks unusually cloudy or has separated, and never use a bottle with a missing or broken tamper-evident ring.

Value for money

The simplest way to judge value is cost per millilitre and cost per day. Divide the price shown on the product page by ten to get the cost per millilitre, then multiply by the number of millilitres you expect to use daily. A typical mouth-to-lung user going through around 1 to 3ml a day will find a 10ml bottle lasts between three and ten days, depending on the device and power setting. That makes the bottle price easy to compare with your current weekly spend on tobacco or disposable vapes.

Several factors shape the real cost beyond the bottle price:

• Multi-buy offers: 10ml bottles are often sold in bundles or discounted multipacks. Check the product page and basket for current promotions, which can bring the per-bottle price down noticeably.
• Coils: budget for a coil roughly every one to two weeks. A pack of coils costs a few pounds and is a small but regular expense, especially with sweet liquids.
• Device: a reusable pod kit has an upfront cost, but spread across months of use, it works out cheaper than repeatedly buying single-use devices.
• Waste: using a refillable device reduces the number of batteries and plastic bodies you throw away, which has both cost and environmental benefits.

Compared with disposables, bottled liquid generally costs less per puff once you account for the reusable hardware. Compared with larger shortfill bottles, 10ml nicotine salt bottles are priced higher per millilitre, but they are the only way to buy ready-nicotined liquid in the UK, since shortfills are sold without nicotine and require you to add a separate nicotine shot. For many buyers, the convenience of a ready-to-use 10ml bottle outweighs the small per-millilitre premium.

Delivery matters too. We dispatch orders from the UK, and the available delivery options, costs and any free-delivery threshold are shown at checkout. Age verification applies to all orders containing nicotine products. Since the value of a purchase depends partly on how easily you can re-order when you run out, it makes sense to buy a few bottles at once if you have found a flavour you like, provided you store them properly and use them within the best-before date.

On balance, Slush Brew represents reasonable value for an adult vaper who wants a sweet, iced flavour in a standard bottle, as long as the device, strength and coil are matched properly. It does not promise to outperform every other liquid, and the cheapest bottle is not always the one that suits your setup.

How it compares with other 10ml e-liquids

No single 10ml liquid suits every vaper, so a fair comparison focuses on trade-offs. Below is how Slush Brew sits against other common options in the UK market. We have kept the comparisons general, since ranges, strengths and formulations change over time.

• Versus other 10ml nicotine salt ranges from brands such as Elfliq, IVG Salts, Hayati or Dinner Lady: most of these lines offer a wide set of fruit, candy and iced flavours in the same 10ml format and similar 50/50 bases. Some are closely tied to particular disposable flavours, which may suit you if you want to replicate one. Others have larger catalogues or distinctive dessert profiles. Slush Brew's selling point is its slush-style iced identity. If you want a specific flavour from another brand, check that range first.
• Versus freebase 10ml liquids: freebase liquids in the 3mg to 12mg range are designed for bigger tanks and higher power. They produce more vapour and a different throat hit. A nicotine salt like this suits compact pods and low wattage better, while freebase is more at home in sub-ohm and higher-wattage devices.
• Versus 50ml shortfills: shortfills are cheaper per millilitre and typically use a higher-VG base for bigger clouds, but they contain no nicotine and need a separate nicotine shot if you want nicotine. They are bulkier and are aimed at more experienced vapers using sub-ohm tanks. A 10ml bottle is simpler, more portable and ready to use.
• Versus the old disposable route: single-use vapes are now banned in Great Britain, and a refill kit offers more flavour choice, lower running costs and less waste. The trade-off is a little more effort: filling, priming and changing coils.

Where Slush Brew is genuinely competitive is in giving an easy-to-recognise sweet and cool profile at an approachable bottle price. Where it is less compelling is for people who want tobacco, plain menthol or heavy dessert flavours, for whom other ranges offer a closer match. It is also not the right pick for those who want a very high-VG, cloud-focused experience.

If you are unsure, the most sensible approach is to buy one bottle at a modest strength, try it in your own device for a week, and compare it with what you are already using. A single 10ml bottle is a low-risk way to find out whether this flavour style suits you before ordering more.