Smok Helmet CLP 0.6Ohm (Pack of 5)

Overview

The Smok Helmet CLP 0.6Ohm (Pack of 5) by Smok in 0.6 Ohm at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Smok Helmet CLP 0.6Ohm (Pack of 5): what you are buying

Smok Helmet CLP 0.6Ohm (Pack of 5) is a set of five replacement coil heads from Smok, listed from £3.85. Every coil in the pack has a resistance of 0.6 ohm. This is a consumable part, not a complete vape, so it only makes sense if you already own a Smok device that takes this coil. If you do, it is one of the least expensive ways to keep that device tasting the way it did on day one.

A coil head is the small component that actually makes vapour. Inside the casing sits a length of resistance wire in contact with a wick. When you draw on the device or press its button, the battery sends current through the wire, the wire warms, and the e-liquid held in the wick turns to vapour. Every pod, tank and cartridge system contains some version of this arrangement, and every one of them wears out. Residue from sweeteners builds up, the wick darkens, and flavour drifts from clear to muted to burnt. Swapping in a fresh head is the quickest fix, and it costs far less than most people expect.

At £3.85 for five, the sum comes to roughly 77p per coil. A pack of five also means you can keep spares in a drawer, so a worn coil never leaves you without your device while you wait for a delivery. The sections below cover how to confirm the coil fits, what 0.6 ohm means, how it behaves in use, how to prime and fit it, what to do when something goes wrong, and how the price stacks up against other coil packs in our coils collection.

The quick facts, so you can decide whether the rest is worth your time:

• Product: Smok Helmet CLP 0.6Ohm (Pack of 5)
• Type: replacement coil heads, sold as an accessory part
• Resistance: 0.6 ohm
• Quantity: five coils per pack
• Price: from £3.85, about 77p per coil
• Needs: a compatible Smok device; you must be 18 or over to buy
• Delivery: free standard UK delivery on orders over £20

One note on scope. The listing gives the name, the resistance and the pack size. It does not publish the wire material, the wick, the wattage range or a lifespan figure, so where this guide discusses those things it describes coils in general and says so, rather than pinning invented numbers on this particular product. For manufacturer figures, read the printed packet when it arrives.

Matching the coil to your device before you order

Coils are the part of vaping where wrong orders happen most often, and the reason is simple. Manufacturers run many coil families at once, the names look alike, and the heads are physically similar. Smok alone has produced coil and pod designs across its Nord, Novo, RPM, Nfix and other lines, and a head built for one will usually not seat, seal or connect in another. The only reliable check is to read the name on the part you are replacing.

Before ordering Smok Helmet CLP 0.6Ohm (Pack of 5), run through this list:

• Read your current coil. The name, or at least a code, is normally printed on the coil casing or on the packet it came in. You are looking for the words Helmet and CLP, and for a resistance figure.
• Check the original box or manual. Device packaging usually names the coil family it uses and lists the resistances it supports.
• Look up the device. Our Smok collection groups the Smok kits and parts we stock, and each listing names the pod or coil it uses.
• Compare resistance. If the coil you are replacing says 0.6 ohm, this pack is a like-for-like swap. If it says something else, read the next section before deciding.
• Ask before you open. If you cannot tell, send a photo of the coil and the device through our contact page and we will point you the right way.

It helps to know what a mismatch looks like. A head with the wrong base may not seat at all. A head that seats but belongs to another family can leak, fire poorly or trigger a short-circuit warning on the screen or the LED. None of that is dangerous once you stop and remove the part, but it wastes time and money. Treat an opened coil as used. Our delivery and returns page explains that faulty items can be returned within 30 days and that opened e-liquids, disposables and pods cannot be, so check the fit before you open the packet rather than after.

Some Smok parts we stock carry similar-sounding names. The Smok Spirals Tank 0.6Ohm (Pack of 5) shares this pack's resistance and pack size, but it is a differently named part. The SMOK Replacement Coils listing covers other fitments again. A matching resistance is not a matching fitment, so never treat the number alone as confirmation.

What 0.6 ohm means: resistance, power and coil construction

Resistance, measured in ohms, describes how hard a coil resists the flow of electricity. For a given battery voltage, a lower resistance lets more current through, which produces more heat and, in turn, more vapour. The relationship is simple physics: power equals voltage squared divided by resistance. As an illustration only, a device delivering 3.7 volts to the coil would push about 22.8 watts through a 0.6 ohm coil, about 17.1 watts through a 0.8 ohm coil, and about 91 watts through a 0.15 ohm coil. Most modern devices regulate their output, so what a real device delivers depends on its chip and settings and not on this sum alone. The point of the sum is the pattern, not the exact figure.

Where does 0.6 ohm sit? Strictly speaking, anything under 1 ohm is called sub-ohm, but in everyday use the word is reserved for low-resistance coils such as 0.15 or 0.2 ohm that are built for big clouds at high wattage. A 0.6 ohm coil lands in the middle. It gives a warmer, fuller draw than the 0.8 to 1.2 ohm heads used for tight, cigarette-style inhaling, without the airflow demands and e-liquid appetite of the very low resistances. To feel the contrast for yourself, compare the Smok Nfix Pod 0.8Ohm (Pack of 3) at the tighter end with the Smok RPM160 Meshed 0.15Ohm (Pack of 3) at the high-power end.

A rough guide to how resistance changes the experience:

• 0.8 to 1.2 ohm: tighter draw, lower power, cooler vapour, longer battery and e-liquid life.
• 0.5 to 0.7 ohm: a balanced middle with a looser draw, warmer vapour and noticeably more output than the tighter heads.
• 0.15 to 0.3 ohm: airy draw, high wattage, large clouds, fast battery drain and heavy e-liquid use.

Coil construction is the other half of the story. Coil heads are commonly built from round wire, from mesh, or from a ceramic element, almost always with a cotton wick in the first two cases. Mesh spreads heat across a larger surface and is often chosen for even flavour. Round wire is simple and widely used. The listing for this pack does not say which construction the Helmet CLP uses, and the abbreviation CLP is Smok's own designation that the listing does not expand, so we will not guess. The packet will carry the manufacturer's details.

Power, battery and charging: how a coil fits into the picture

A coil does not have a battery and does not charge. It draws its energy from the device it sits in, so everything to do with charging time, runtime and button behaviour belongs to the Smok device and not to this pack. That said, coil and battery are in constant conversation, and understanding it explains several faults that people wrongly blame on one or the other.

The relationship runs in one direction: lower resistance asks more of the battery. If you fit a 0.6 ohm head to a device that previously ran a 0.8 or 1.0 ohm head, expect the battery to drain a little faster, because the same voltage pushes more current through a lower resistance. Move the other way and the battery tends to last longer, but the vapour is cooler and lighter. Neither choice is wrong. It is a straight trade between runtime and output, and the device's own manual will name the resistances it supports.

Some practical points on the power side:

• Charge with the right lead. Use the cable that came with the device, or a reputable charger of the type the manufacturer specifies. This pack has no battery capacity to quote because a coil has none, and you should be wary of any page that claims otherwise.
• Do not leave a device charging unattended overnight. The usual care around rechargeable lithium cells applies to every vape, whichever coil is fitted.
• A low battery looks like a bad coil. As the cell sags, vapour thins and flavour dulls. Before blaming a coil you have only just fitted, charge the device fully and test again.
• A fresh coil can feel like a recharge. A head coated in residue needs more energy to vaporise the same amount of liquid, so a new one often makes the device feel livelier than it was.
• Keep contacts clean. A film of e-liquid on the connection between coil and device can interrupt the circuit. Wipe it with a dry cotton bud when the device is switched off.

If you are still choosing a device, the vape kits collection lists kits with their own capacity and charging details. Examples from the brand include the SMOK Nord 6 Pod Kit and the SMOK Novo 6 Pod Kit. Those are illustrations of the range, not confirmation that either takes the Helmet CLP coil, so always match the coil name as described earlier.

Performance in everyday use: vapour, draw and throat feel

People searching for a coil sometimes look for a puff count, because that is how disposables are sold. A coil has no puff rating. A disposable's figure reflects how much e-liquid and battery are packed inside the body, whereas a coil is judged by how many days or weeks it stays clean-tasting. For Smok Helmet CLP 0.6Ohm (Pack of 5), the useful measure is therefore how long each head lasts you, and how consistent the vapour is until it does not.

As a rule of thumb for regular daily use, many vapers change a coil somewhere between one and two weeks, which would make a pack of five last roughly five to ten weeks. That is a general guide and not a promise for this product. Heavy use, chain vaping, very sweet liquids and high power all shorten it. Light use, savoury or menthol flavours and moderate power stretch it. You will quickly learn your own pattern, and the first sign is almost always a change in taste long before the vapour itself fails.

What does a 0.6 ohm coil deliver while it is healthy? In general terms:

• Vapour volume: a visible, medium-to-generous cloud, more than a tight 1.0 ohm head and well short of a high-power low-resistance build.
• Draw: a looser pull than a cigarette-style inhale, usually described as restricted lung or relaxed mouth-to-lung, depending on how the device's airflow is set.
• Throat feel: smoother at low nicotine strengths, and sharper at higher strengths as more power reaches the liquid.
• Consistency: steady from the first puff to the last when the coil is primed and the pod or tank is kept topped up.

What shortens performance? The main culprits are a coil that was never properly primed, a pod run close to empty, very thick high-VG liquid on a coil that wicks slowly, and constant back-to-back draws that do not let the cotton re-saturate. Each one produces the same symptom, a hot, harsh, slightly burnt taste, and the fix is nearly always to stop, refill, wait and try again with shorter draws. If the burnt taste survives a refill and a wait, the coil has reached the end of its life and the next one in the pack is ready.

Compared with single-use products, a refillable setup using a pack like this tends to be steadier across its life, because you control when the coil is replaced. With single-use vapes now restricted in the UK, reusable systems with replaceable parts are where this kind of product naturally sits. Browse more parts in our vape accessories collection.

Flavour profile: what a 0.6 ohm coil does to your e-liquid

A coil has no flavour of its own. What it does is shape how your chosen e-liquid tastes, and 0.6 ohm is a sensible resistance for doing that well. The coil runs warm rather than hot at moderate power, which keeps the more delicate top notes in fruit, menthol and dessert profiles intact, while still producing enough vapour for the body of the flavour to register. Very low-resistance coils at high wattage can scorch those delicate notes. Very high-resistance coils can feel thin. The middle ground is where Smok Helmet CLP 0.6Ohm (Pack of 5) sits.

How different families of flavour tend to behave on a coil of this kind:

• Fruit and ice: clean and distinct, with the cooling note arriving a moment after the fruit. Sweeteners are the main thing that wears the coil, so expect fruit-heavy liquids to age a head faster.
• Menthol and mint: crisp and long-lived. Menthol liquids are usually kinder to a coil than dessert profiles.
• Tobacco: warm and rounded at moderate power, and often a good match for the slightly looser draw of this resistance.
• Desserts and creams: rich and full, but they contain the most sugar-like compounds, so the coil darkens sooner and flavour mutes sooner.

There is one more thing worth knowing about flavour and coils, and it is ghosting. A used coil holds a faint memory of the last liquid it handled. Switch from a heavy dessert to a sharp menthol on the same head and the menthol will carry a trace of cream. At 77p a coil, it can make sense to keep a head for one flavour family and swap it when you change direction, rather than stretching one coil across everything you vape. If you like variety, fit a fresh head whenever you move to a very different profile.

The coil also interacts with the liquid's PG and VG balance. Higher-PG liquids wick quickly and carry flavour crisply, while higher-VG liquids are thicker, smoother and produce more cloud but can wick slowly on a coil running at modest power. A balanced blend generally suits a 0.6 ohm head. Explore flavours by category in our e-liquids collection or look at nicotine salt e-liquids, which suit this type of draw particularly well.

Nicotine strength guidance for a 0.6 ohm coil

The coil contains no nicotine. Your choice of strength is made in the e-liquid, but the coil changes how that strength feels, so it belongs in any honest write-up about this pack. The UK limit for nicotine-containing e-liquid is 20mg per millilitre, which is 2 per cent, and retail bottles of nicotine e-liquid are capped at 10ml. Those rules apply to every product we sell, and you must be 18 or over to buy. Nicotine is addictive, and if you do not currently use nicotine there is no reason to start.

With that said, here is how strength and a 0.6 ohm coil tend to pair up for adults who already use nicotine:

• Nicotine salts at 10mg: smooth and light. A common choice for a looser draw, because the extra vapour carries more nicotine with each pull.
• Nicotine salts at 20mg: the strongest legal level, popular with adults switching from smoking who want a satisfying hit from a small pod. On a 0.6 ohm coil this can feel firm, so a lower strength is worth trying first if you take long draws.
• Freebase at 3mg to 6mg: a more traditional liquid with a stronger throat feel. Suits those who prefer bigger inhales and a looser airflow.
• Freebase at 12mg to 18mg: better matched to a tighter draw than a 0.6 ohm coil provides.
• 0mg: available for those who like the ritual and flavour without nicotine.

A simple way to calibrate is to remember that a lower-resistance coil gives you more vapour per puff, and more vapour means more nicotine per puff at the same strength. If you move to 0.6 ohm from a 0.8 or 1.0 ohm head and everything suddenly feels stronger, step down one level in the bottle you use rather than blaming the liquid. If you feel unsatisfied, step up one level or take shorter draws more often. Change one thing at a time so you can tell what made the difference.

The lawful size of the tank or pod matters too. In the UK, refillable tanks and pods cannot hold more than 2ml, which is why top-ups happen more often than many newcomers expect. Shop the ranges by strength in our 20mg e-liquids collection, or look through refills and pods if you need the pod itself rather than just the coil. None of this is medical advice. If you have health concerns related to nicotine, speak to a doctor or pharmacist.

Build, packaging and what a pack of five really gives you

A coil head looks like a small thing because it is one, but it is a more carefully made part than its size suggests. The typical head has a metal casing that holds the heating element and wick, small inlet ports where the e-liquid soaks in, a silicone seal at the base that stops liquid leaking past the coil into the device, and electrical contacts at the bottom. When you hold Smok Helmet CLP 0.6Ohm (Pack of 5), you are looking at five of those assemblies, and the quality of the seal and the contacts matters more to how it behaves than any marketing wording.

What to check when the pack arrives:

• The packet is intact. The coils should be sealed together or individually, with no visible damage to the casing and no sign that liquid has already been in them.
• The name matches. Compare the print on the packet with the coil you are replacing. This is your last chance to catch a mismatch before opening.
• The seal is seated. The silicone ring at the base should sit flat and unbroken. A pinched or displaced seal is a leak waiting to happen.
• The contacts are clean. Bright, undamaged metal at the base indicates a good connection.

On the question of five coils, think of the pack as a stock of time. At the typical replacement interval discussed earlier, five heads cover a good few weeks of vaping. Because the per-coil price is low, it is easier to replace at the first sign of fade, which is the habit that keeps flavour good, instead of squeezing every last day out of a tired head. Keep two or three in reserve so a worn coil never leaves the device idle.

Storage is simple. Keep unused coils in their packet, in a dry place at room temperature, away from direct sunlight and radiators, and well away from open bottles of e-liquid. Unused coils are stable for a long time under those conditions, so there is no pressure to use the whole pack quickly. Never store a used coil, because the wick will dry and crust and cannot be reused reliably once removed.

If you want to pair this pack with other consumables in one order, the SMOK Replacement Pods listing covers pods for other Smok systems, and the accessories collection holds spare parts from many brands. Adding either to the basket can also help you reach the free-delivery threshold, covered further down.

Fitting, priming and caring for a new coil

Fitting a coil takes a couple of minutes, and priming it correctly is the single habit that most improves how long it lasts. Skipping the priming step is the most common reason a brand-new coil tastes burnt on the first day. The exact release mechanism depends on your device, so follow its manual for removal. The general sequence is the same for nearly every system:

• Step 1, switch off and empty. Turn the device off. If it is a refillable pod or tank, pour out any remaining e-liquid and remove it from the body.
• Step 2, remove the old coil. Pull or unscrew the head according to your device design. Do not force it. Note how the old one sat so the new one goes in the same way.
• Step 3, inspect the seat. Look for dried residue or flooded liquid in the socket. Wipe it dry with a cotton bud.
• Step 4, seat the new coil. Push or screw the head into place until it is firm and level. A coil that sits crooked will leak.
• Step 5, prime. Add a few drops of your e-liquid directly onto the wick through the inlet ports, if your coil design exposes them. Then fill the pod or tank to the fill line and no higher.
• Step 6, wait. Leave the device standing for five to ten minutes so the liquid can soak through the cotton fully. This is the step people skip.
• Step 7, take gentle first puffs. Start with short, unhurried draws and, if your device has adjustable power, begin at the lower end of its range before raising it.

Day-to-day care keeps a coil alive. Keep the pod or tank above about a quarter full, because a coil run dry will burn in seconds. Avoid chain vaping, since the cotton needs a few moments between puffs to re-wet. Do not press the button without drawing, which is called dry firing. If you change flavours, flush the pod with warm water, dry it fully, then refill.

Know when to retire it. The three signs are a muted flavour that does not recover after a refill, a darkened or burnt taste, and a gurgling or spitting sound from the coil. At that point the next head in the pack is the answer. A new coil is part of the routine, much like changing a razor blade. For more on Smok systems and parts, the Smok RPM5 Pods (Pack of 3) page shows another pod format from the same brand, useful if you are mapping out which parts belong to which device.

Troubleshooting: when the coil is the problem and when it is not

Most vape faults produce one of a handful of symptoms, and several of them look identical even though the causes differ. Before you condemn a coil, work through the likely culprits in order. The list below pairs each symptom with its most probable cause and the first thing to try.

• Burnt or acrid taste straight after fitting. Usually an unprimed coil. Turn the device off, add a few drops to the wick, refill, wait ten minutes and try gentle draws. If it persists after that, the head may be faulty.
• Flavour has slowly gone flat over weeks. Normal ageing. Residue from sweeteners has built up and the coil has reached the end of its life. Fit the next one.
• Weak vapour but the taste is fine. Check the battery first. Charge fully and test again. Then check that the coil is seated firmly and the airflow is not blocked.
• Gurgling or spitting. Often caused by excess condensation or by a pod filled above the line. Wipe the mouthpiece, remove any extra liquid and take slower draws.
• Leaking from the base. Check that the seal is flat and the head is seated straight. A pod filled past its line, or a pod that has been left in a hot place, will also weep.
• Device shows a short-circuit or no-atomiser warning. The coil is not making contact. Remove it, clean the contacts with a dry cotton bud and refit. If the warning stays, the coil may be the wrong type for the device.
• Hard draw or no airflow. Look for liquid blocking the airflow channel and blow gently through the mouthpiece with the coil removed.
• Hot, harsh vapour after a long session. The wick has not had time to re-wet. Pause, take shorter pulls and wait between them.

A few diagnostic principles save a lot of frustration. First, change one variable at a time, otherwise you will never learn which fixed it. Second, test with a different e-liquid if you suspect the juice, because a thick or very sweet liquid can mimic a failing coil. Third, remember that a new coil in a worn-out pod will still leak and a new coil on a flat battery will still underperform.

If you have fitted a coil that is correct for your device, primed it properly and it still fails within days, it may be faulty. Our delivery and returns page allows faulty items to be returned within 30 days for a replacement or refund, and you can start that process on our contact page. Our FAQ page covers general ordering questions as well.

Value for money and how this pack compares with other coils

The sensible way to judge a coil pack is price per coil, then whether those coils suit your device. Smok Helmet CLP 0.6Ohm (Pack of 5) is listed from £3.85, which is about 77p for each head. Here is how that compares with other five-coil and similar packs we stock, using the current from-prices on each listing:

• This pack: from £3.85 for five, about 77p per coil.
• Smok Spirals Tank 0.6Ohm (Pack of 5): £5.00 for five, about £1.00 per coil. See the Smok Spirals Tank listing.
• Smok Vape Pen 22 Core 0.3Ohm (Pack of 5): from £5.57, about £1.11 per coil. See the Vape Pen 22 Core coil pack.
• Innokin Jem Coils (Pack of 5): from £7.95, about £1.59 per coil. See the Innokin Jem coils.
• Aspire AF Replacement Coils (Pack of 5): from £9.99, about £2.00 per coil. See the Aspire AF coils.
• Vaporesso GTX Replacement Coils (Pack of 5): from £9.99, about £2.00 per coil. See the Vaporesso GTX coils.
• Geekvape M Series Coils (Pack of 5): from £15.90, about £3.18 per coil. See the Geekvape M Series coils.
• Uwell Valyrian 2 Coils (Pack of 2): from £9.95, about £4.98 per coil. See the Uwell Valyrian 2 coils.
• OXVA Unicoil (Pack of 5): from £1.99, about 40p per coil. See the OXVA Unicoil pack.

Read that list fairly. Coils are made for specific devices, so you cannot swap an Aspire head into a Smok device to save a pound. The comparison is useful for running cost when you are choosing which ecosystem to buy into, and as a reality check on whether 77p is reasonable. It is. Only the OXVA Unicoil is cheaper per head in this set, and it belongs to a different system. Higher-priced coils are often built for larger tanks and higher power, so a higher price does not always mean waste, and a lower price does not always mean better.

The annual arithmetic is easy. If you replace one coil every two weeks, you will use about 26 a year, a little over five packs. At 77p each that comes to roughly £20, or £23.10 if you buy six packs. Even replacing weekly keeps the yearly cost modest next to the e-liquid itself.

One buying tip. Standard UK delivery on orders under £20 costs £2.99, so a single £3.85 pack on its own effectively costs more like £1.37 per coil once delivery is counted. Six packs come to £23.10 and qualify for free standard delivery, which puts 30 coils in your drawer at the 77p rate. If you only need one pack, pair it with something else you were going to buy, such as e-liquid from our vape deals or a bargain from the sale collection.

Who this pack suits, UK rules, delivery and disposal

Smok Helmet CLP 0.6Ohm (Pack of 5) is built for a particular reader, and being clear about that saves everyone time.

It suits:

• Adults who already own a Smok device that uses the Helmet CLP coil and want to restock cheaply.
• Vapers who like a medium, warm draw and a looser airflow than a tight 1.0 ohm head provides.
• People who change flavours often and want a fresh coil for each direction.
• Anyone who keeps spares so a worn coil never leaves them stuck.

It does not suit:

• Anyone who is not sure which coil their device uses. Check first, using the steps above.
• People who want a ready-to-use product with liquid already inside. Look at our pod kits or disposable-style range for that.
• Anyone who prefers a very tight cigarette-style draw or, at the other end, very high wattage and huge clouds.
• Anyone under 18, and anyone who does not currently use nicotine and has no reason to start.

On UK rules: you must be 18 or over to buy, and we use age-verified checkout. Nicotine e-liquid is capped at 20mg per millilitre, bottles are limited to 10ml, and refillable tanks and pods to 2ml. We do not make health claims about vaping, and neither should you rely on any page that does.

On delivery: standard UK delivery is free on orders over £20 and takes two to three working days. Under £20 it is £2.99, and next-day delivery is £4.99 when you order before 4pm Monday to Friday. Full details sit on the delivery and returns page. For range browsing, the Smok collection and the new arrivals are worth a look.

On disposal: used coil heads contain metal and a cotton wick but no battery, and they are small enough to forget about. Do not put them in kerbside recycling, and check your council's guidance on how it wants small metal and electrical items handled. Devices and batteries should never go in household bins. Take them to a recycling drop-off point, which is usually a household waste recycling centre or a retailer offering electrical take-back.