OXVA Xlim Go 2 Pod Kit Weave Black

Overview

The OXVA Xlim Go 2 Pod Kit Weave Black by Oxva in Weave Black at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Overview of the OXVA Xlim Go 2 Pod Kit

The OXVA Xlim Go 2 Pod Kit is a compact, refillable pod system for adult smokers and existing vapers who want more control over flavour and nicotine than a sealed device can offer, without stepping up to a box mod. It belongs to OXVA's Xlim line, a family that has built its following on slim bodies, simple draw-activated firing and a pod and coil range that covers both tight mouth-to-lung (MTL) vaping and looser restricted direct-to-lung (RDL) vaping. The Go 2 name points to the second generation of the easy-going Xlim Go format: you fill it, click the pod in and vape, with very little to learn.

A pod kit is a different proposition from the single-use devices many people started on. You buy the hardware once, then buy 10ml bottles of e-liquid and replacement pods as you go. That means you choose the flavour, you choose the nicotine strength, and you are not throwing a battery-powered device in the bin every few days. In the UK, that matters more than it used to: single-use vapes were banned from sale in June 2025, so rechargeable and refillable hardware is now the normal route for anyone who wants a grab-and-go experience.

This page covers the Xlim Go 2 in the detail a buyer actually needs. We look at the specification, the way it delivers vapour, which e-liquid styles suit it, the build, the battery, the pod and coil, nicotine strength guidance, who it suits and who should look elsewhere, how to set it up, how to fix common faults, and how it stacks up on price against similar kits.

The listing for this kit includes 15 variants. With a kit, variants normally refer to colour and finish rather than a different flavour, because e-liquid is bought separately. The hardware inside is the same across the range, so pick the look you like and check the in-box contents shown in the product gallery before you order.

One honest note before we go further. OXVA revises its pod and coil lineup between generations, and specifications can differ slightly between batches. Where this guide gives figures, they are the typical values for this class of device and for the Xlim family. Treat the specification table on this page and the printed leaflet in the box as the final word on any single number.

Key specifications at a glance

Specifications decide whether a pod kit fits your habits, so here is the summary, followed by what each line means in daily use. Figures are typical for the Xlim Go format and should be confirmed against the specification table on this page.

• Device type: refillable pod kit, draw-activated with a manual fire option on many Xlim models
• Battery: built-in rechargeable cell of roughly 1000mAh
• Charging: USB Type-C, typically 45 to 75 minutes from empty
• Pod capacity: 2ml, which is the legal maximum for a refillable pod or tank sold in the UK
• Output: low to mid power, in the region of 15 to 25W depending on the coil fitted
• Coil resistance: the wider Xlim pod family runs from roughly 0.4 ohm to 1.2 ohm; check which resistance is supplied in the box
• Filling: side or top fill port with a silicone bung, suitable for standard 10ml bottles
• Airflow: adjustable or semi-adjustable on the base or side, depending on the pod supplied
• Expected life per fill: roughly 250 to 500 puffs per 2ml pod, depending on coil, nicotine strength and how you draw

Reading these in order: a 1000mAh battery is a sensible middle ground for a pocket pod. It is large enough to get through a normal day for a light to moderate vaper, and small enough that the body stays slim. The 2ml pod is fixed by UK law, so every compliant refillable pod you can buy here has the same ceiling. What varies is how efficiently the coil uses that 2ml, which is why the coil resistance line is the one to pay attention to.

Output of 15 to 25W is the range that suits nicotine salt e-liquids and freebase liquids with a high VG share in restricted-style pods. Higher is not better here. Turning a small pod up hard tends to burn through liquid and flatten flavour, so the Xlim Go 2 is happiest at the lower and middle part of its range.

Finally, the puff estimate is deliberately a range. A tight, slow draw on a higher-resistance coil with a 20mg nicotine salt can stretch a 2ml pod toward the top of that range. A fast, open draw on a lower-resistance coil with a low-nicotine liquid will use it faster. If someone quotes you a single precise puff count for a refillable pod, treat it as marketing rather than measurement.

Performance and vapour delivery

The Xlim Go 2 is built to deliver smooth, consistent vapour at modest power rather than to chase cloud size. In practice that means the first draw after filling is predictable, the throat hit is controlled, and the device does not demand any adjustment between sessions. For a first pod kit or a step up from a disposable, that predictability is the main selling point.

The vapour delivery depends heavily on which pod and airflow setting you use. With a higher-resistance pod (around 0.8 to 1.2 ohm) and the airflow closed down, the draw is tight and cigarette-like, which is what most people moving from smoking need. The hit is stronger with nicotine salts, and a small amount of vapour goes a long way. With a lower-resistance pod (around 0.6 ohm or below) and the airflow opened up, the draw loosens, the vapour is warmer and thicker, and you get a more relaxed lung-style experience, though still modest by box-mod standards.

Here is how to think about it in three profiles:

• Tight MTL: higher-resistance coil, airflow mostly closed, 10 to 20mg nicotine salt. Expect a draw similar to a cigarette, quick nicotine delivery and long pod life.
• Loose MTL or restricted lung: mid-resistance coil, airflow half open, 6 to 12mg nicotine salt or 3 to 6mg freebase. Expect a softer draw and more visible vapour.
• Open restricted DTL: low-resistance coil, airflow fully open, 3 to 6mg. Expect the most vapour from this kit, shorter battery life and faster liquid use.

Ramp-up is quick. Draw-activated firing means there is no button to press, and in normal use the coil reaches working temperature within about a second. The vapour tends to stay at a similar temperature across a long inhale because the output is stable rather than spiking at the start. As the battery nears empty, expect a slight drop in vapour warmth before the device cuts out or flashes its low-battery indicator.

It is worth being realistic about the ceiling. This is not a high-wattage, sub-ohm cloud device, and it is not meant to be. If you want a large, cool, dense lungful of vapour, a pod mod or a kit with a larger battery and a wider coil range is the better tool. If you want a neat, steady inhale that you can use at a bus stop, a desk or a pub garden without thinking about it, this is the right tier of device.

Flavour profile and what to fill it with

The kit does not come with a flavour of its own. Flavour depends on the e-liquid you put in the pod, and the Xlim Go 2 is an accommodating vehicle for most mainstream styles. Because the output is moderate and the coil is small, the device tends to render flavour accurately without overheating it, which means fruit, mint and dessert profiles all taste clean rather than burnt or muted.

These are the e-liquid styles that tend to work particularly well in a pod of this size, along with a note on why:

• Blue raspberry: a popular sweet-and-sharp profile that stays vivid at low to mid power and does not turn syrupy.
• Strawberry ice: the cooling agent comes through cleanly, and the fruit keeps its character on a mid-resistance coil.
• Mint and menthol: crisp and consistent. Mint liquids are forgiving on higher-resistance coils and are a common choice for people moving off menthol cigarettes.
• Mango and tropical blends: thicker fruit flavours that benefit from a slightly lower resistance coil and a half-open airflow.
• Cola and soft-drink profiles: they hold their carbonated edge well at moderate wattage.
• Tobacco: a good match for tight MTL setups, particularly with 10 to 20mg nicotine salt for smokers who want a familiar throat hit.
• Vanilla custard and bakery styles: richer liquids that can clog a small coil faster, so prefer a lower-sugar formulation and avoid running the device at the top of its power range.

Two practical points help with flavour quality. First, liquids with a higher PG share tend to carry flavour more strongly and wick more reliably in small pods, while higher VG blends are smoother but thicker and can starve the coil if the wick opening is narrow. A 50/50 or 60/40 PG/VG blend is a safe starting point, and nicotine salt liquids are usually already balanced for this type of hardware. Second, very sweet dessert liquids leave residue sooner. If flavour fades after a few days on a new pod, that is usually coil build-up and not a fault with the kit.

Flavour swaps are straightforward. To change liquid, empty and rinse the pod with warm water, dry it fully, and refill. If you are moving between very different flavours, such as from mint to a fruit, it is cleaner to fit a fresh pod, since coil cotton retains some taste from its previous life. Keep a spare pod for each flavour family if you swap often, and you will notice the difference immediately.

Design and build quality

Physically, the Xlim Go 2 follows the Xlim brand's usual approach: a slim, rounded rectangle that disappears into a trouser pocket or a small bag. The body is lightweight and the surface finish is smooth enough that it feels like a product rather than a prototype. The colourways on this page vary in finish, with some in solid colour and others in a more textured or gradient style, so the physical feel can differ slightly from one variant to the next.

The things that matter in daily use are the details, and these are the ones to look for when you unbox it:

• Pod seating: the pod should click in with a firm, even fit and no wobble. A well-seated pod is also what makes the electrical contact reliable.
• Fill port: a silicone bung that is snug but not stiff. If it is hard to lift with a fingernail, it is also likely to hold a seal well.
• Charging port: a Type-C socket on the base, with enough room that a standard cable seats fully.
• Indicator light: a simple LED that shows firing and battery state. There is no screen, which keeps the price and the failure points down.
• Mouthpiece: a rounded, moulded tip that is comfortable for long sessions and does not feel sharp on the lips.

The strengths of the build are weight, size and simplicity. With no screen and no menu, there is little to break and nothing to learn. The trade-off is that you get less feedback from the device. You cannot see exactly how much battery is left or what wattage is being delivered, so you rely on the LED and your own habits.

As with any slim plastic and metal pod device, it is best treated with moderate care. Do not leave it in a hot car, do not carry it loose with keys that could scratch the finish, and do not charge it overnight on a bed or sofa. A pocket without loose coins, or a small sleeve or lanyard case, is a cheap way to keep it looking new. The contacts under the pod should be wiped dry if a leak occurs, because moisture there is the most common cause of a device that stops firing.

Battery life and charging

A battery of roughly 1000mAh holds around 3.7Wh of energy. At a typical average draw of 12 to 15W while firing, that works out to somewhere between 15 and 20 minutes of active vaping per charge once losses are accounted for. If an average puff lasts about three seconds, you are looking at somewhere in the region of 300 to 450 puffs per charge, which is roughly one to two 2ml pods in normal use.

What this means for different users:

• Light user (a few sessions across the day): a full charge can cover two days.
• Moderate user (replacing about ten cigarettes a day): expect to charge once every day, often in the evening.
• Heavy user (chain vaping or replacing a pack a day): you will probably want to top up midday or carry a power bank and a short cable.

Charging is by USB Type-C. A standard 5V phone charger or a computer USB port is fine, and a basic cable is all you need. Charging a 1000mAh cell from empty typically takes about 45 to 75 minutes, depending on the charger's output. There is no need for a fast charger, and higher-current wall adapters will not make the device charge faster than its own limit allows. The indicator light usually changes colour or goes out when charging is complete.

To get the most from the battery over time, a few habits help. Avoid running it flat on a regular basis, because lithium cells age faster when repeatedly fully drained. Avoid leaving it on charge for many hours once full. Do not charge a device that feels warm, wet or swollen. Keep it out of direct sunlight and away from very cold or very hot environments.

Many pod kits can be vaped while charging, a feature often called pass-through. It works, but it generates more heat and is not recommended as a regular habit. If you must use it, do so briefly, on a hard surface.

When the battery eventually stops holding a useful charge, which for a cell of this type usually takes a year or more of regular use, do not put the device in household waste. Lithium batteries and electronic devices are covered by waste electrical regulations in the UK. Retailers that sell vape products are generally required to take back old devices, and local recycling centres also accept them. Many supermarkets and electrical shops run drop-off points for small electricals. Remove the pod, empty any remaining liquid, and drop the whole device at a drop-off point. This keeps a lithium cell out of the bin lorry, where it is a fire risk.

Pod and coil technology

The pod is where the kit's character comes from. Replacement pods for the Xlim line are built around a small replaceable coil head, with cotton wicking and a wire element that heats the liquid. Depending on the pod type, the coil is either a conventional round-wire design or a mesh design, where a thin sheet of mesh gives a larger heating area. The wider Xlim pod family has used resistances that range from about 0.4 ohm to 1.2 ohm. Check the pod printed on the box and on this listing to confirm which resistance your kit includes.

This is the practical guide to resistance:

• 0.8 to 1.2 ohm: best for nicotine salts and tight draws. Lower power use, longer battery life, longer pod life, cooler vapour and a firmer throat hit at higher nicotine strengths.
• 0.6 to 0.8 ohm: a middle ground. A little more vapour and warmth, slightly shorter life, and suitable for 6 to 12mg salts or low-strength freebase.
• 0.4 to 0.6 ohm: looser, warmer and more vapour-heavy. It suits lower nicotine strengths, and it is the setting where the battery and the liquid are used fastest.

Coil life is the other part of the equation. A coil in a small pod will normally last between one and three weeks for an average user, but it depends on the liquid. Sweet, thick or heavily flavoured liquids shorten coil life because sugars and additives caramelise on the heating element. Menthol, tobacco and thinner fruit liquids tend to be kinder. The usual signs that a coil is finished are a burnt or flat taste, a harsh hit, reduced vapour or a gurgling sound, and none of these are cured by turning the power up.

Priming matters more than most people expect. After fitting a fresh pod, fill it, then let it sit for five to ten minutes before the first draw so the cotton can saturate. Take a few gentle draws without firing if the device allows it. A dry-burnt coil is the single most common reason a new pod tastes wrong, and it cannot be recovered once it happens.

Because the pod is a consumable, running costs are low but not zero. Plan on a new pod every couple of weeks for regular use. Stocking a spare pod of each resistance you like is a sensible way to avoid being caught short. Only use pods designed for the Xlim Go format. Pods from other ranges that look similar can fit loosely, leak or fail to make contact, and they are not worth the risk.

Choosing a nicotine strength

Nicotine strength is the decision that most affects whether a pod kit works for you. In the UK, nicotine e-liquid is capped at 20mg/ml, and refill bottles are capped at 10ml. Anything you buy from a reputable UK shop will be inside those limits. The same cap applies to the pods and liquids sold for refillable kits as to the nicotine in the old single-use devices, which is why 20mg is the strongest option you will see on the shelf. Nicotine products are for adults aged 18 and over only.

As a guide, there are two kinds of nicotine to consider. Nicotine salts are smoother at higher strengths and deliver nicotine more quickly, which is why they suit small, low-power pod devices like this one. Freebase nicotine has a harsher throat hit and is more usual in lower strengths in higher-power devices.

A starting point by smoking habit:

• Ten or more cigarettes a day, or the first cigarette within thirty minutes of waking: 18 to 20mg nicotine salt, tight MTL setup.
• Five to ten cigarettes a day: 10 to 12mg nicotine salt.
• Social or occasional smoker: 5 to 6mg nicotine salt or 3mg freebase.
• Existing vaper stepping down: reduce by a small step and give it a week before adjusting again.
• Never smoked or vaped: this is not a product for you. Nicotine is addictive, and vaping is intended for adults who already smoke.

Signs you have the wrong strength are fairly reliable. If you cough, feel dizzy, get a racing heart, or feel nauseous after a few puffs, the strength is too high for you or the draw is too hard. If you feel unsatisfied, take lots of short puffs, or reach for a cigarette in between, the strength is too low. Move one step at a time, and give each change a few days before judging.

Higher power and looser airflow also deliver more nicotine per puff, so a strength that is comfortable on a tight, high-resistance coil can feel overwhelming on an open, low-resistance one. If you change coil resistance, consider changing strength with it.

If you are using vaping to quit smoking, the NHS and local stop smoking services can provide free support and advice, and they are worth contacting. A vape on its own is a tool, and combining it with a plan to reduce strength over time improves the odds of success.

Who the Xlim Go 2 suits and who should skip it

No device suits everybody, so here is a direct view of who gets the most from this kit and who is better served elsewhere.

It is a good fit for:

• Smokers switching to vaping: a draw-activated, no-fuss device with a tight MTL option is close to what a cigarette feels like, and the nicotine salt options suit that switch.
• Disposable users looking for a rechargeable replacement: with single-use vapes now off the shelves, this is a refillable equivalent that tends to cost less per week and produces much less waste.
• People who want a pocketable second device: a spare kit for the car, desk or travel bag, paired with a bigger device at home.
• Anyone who dislikes menus and settings: there are no screens, modes or wattage adjustments to learn.
• Cost-conscious vapers: a pod kit with a 2ml refill has a lower running cost than buying a new device each week.

You should probably skip it if:

• You want large clouds: a sub-ohm pod mod or tank kit with a bigger battery is the better tool.
• You want to fine-tune wattage: this is a fixed-output device and it is not built for tweaking.
• You vape very heavily all day: a 2ml pod and a 1000mAh battery will need frequent attention. A device with a larger tank and battery will be less of a chore.
• You use thick, high-VG, heavily sweetened liquids as your main diet: small pods can struggle to wick these, and coils will have a short life.
• You have never smoked: no vape is recommended for non-smokers.
• You want a sealed, no-refill product: a pod kit needs filling, rinsing and coil changes. If that sounds like too much, a pre-filled pod system may be easier, although it will cost more per millilitre.

The balance is simple. If you want a small, tidy, affordable way to vape every day with minimal maintenance, the Xlim Go 2 fits the brief. If you want maximum vapour, maximum battery or a feature list, you will outgrow it quickly.

How to fill, activate and use the kit

Setting up the Xlim Go 2 takes about five minutes. These steps cover the whole process, from the box to the first draw.

• Step 1, unbox and check: remove the device, pod and cable. Look for loose parts and check that the pod is intact. Remove any protective film.
• Step 2, charge it first: plug the device into a USB charger using the supplied cable and let it charge fully. This is good practice for a new battery, and it avoids a dead device during priming.
• Step 3, fill the pod: pull the pod out of the body, open the silicone bung on the fill port, and fill slowly with the nozzle of the e-liquid bottle against the side of the port. Do not fill past the maximum line, and avoid the central tube, since liquid in the airway causes gurgling and leaks. Close the bung firmly.
• Step 4, wait: let the filled pod stand for five to ten minutes so the cotton saturates fully. This is the step people skip, and it is the main reason new coils burn.
• Step 5, fit the pod: push the pod firmly into the body until it clicks.
• Step 6, draw: take a slow, gentle first draw to confirm that the device fires. It is draw-activated, so there is no button to press unless your version includes one.

Day-to-day use is just as simple. Inhale to fire, release to stop. Take draws of two to four seconds, with a short pause of 15 to 30 seconds between draws on a new coil so it keeps wicking. If your version has a lock, it is normally activated by clicking the button several times in quick succession. The LED will show you it has locked or unlocked. Check the leaflet for the exact click count for your model.

Maintenance is minimal but worth doing regularly:

• Wipe the pod contacts and the pod base with a dry tissue once a week.
• Refill before the pod runs fully dry. Running a pod empty is the quickest way to burn a coil.
• Keep the device upright when not in use, with the pod tilted away from the contacts where possible.
• Replace the pod when the taste turns flat or burnt, and not before.
• Rinse the empty pod body, never the coil head, if you are changing flavour. Let it dry fully before refilling.

Store the kit and your liquids out of reach of children and pets. Nicotine liquid is poisonous if swallowed or absorbed through the skin in quantity, and bottles should be kept closed and upright.

Troubleshooting common problems

Most problems with a pod kit have simple causes. Work through these before assuming the device is faulty.

The device does not fire when you draw. First check the battery by plugging it in. If the LED responds, remove the pod, wipe the contacts on both the pod and the body with a dry tissue, and re-seat the pod firmly. Make sure the pod is seated all the way down. If it still does not fire, try a different pod, because a faulty pod is more common than a faulty body. If the problem follows the body, contact us for help.

The LED flashes and the device cuts out. Flashing is usually a signal for low battery, a short circuit or a dry coil, depending on the pattern. Charge the device, then check the pod is not empty and the contacts are clean. The leaflet in the box lists the flash codes for your model.

Burnt or harsh taste. This is almost always one of three things: a dry coil from insufficient priming, a coil nearing the end of its life, or an overly sweet liquid. Refill the pod, wait ten minutes and try again. If the taste persists after a full priming, replace the pod.

Leaking from the pod or the airflow slots. Common causes are overfilling, filling into the central airway, a loose bung, or a pod that is not seated. Remove the pod, wipe everything dry, check that the bung is fully closed, and avoid filling above the line. Temperature and pressure changes can also push liquid out, so on flights or in hot cars, keep the device upright and the pod only part filled.

Gurgling or spitting. Condensation or flooded airflow. Blow gently through the mouthpiece, with the pod removed, to clear the airway. Reduce the amount of liquid and try a thinner PG-heavy liquid.

Weak vapour or poor flavour on a new pod. Probably not primed. Leave it for another few minutes and take gentle draws. If the liquid is very thick, the wick openings may be struggling, and a 50/50 blend will help.

Short battery life. Check the airflow setting, since a more open setting uses more power, and look at the age of the device. A battery that gives much less than it did a few months ago is wearing out. Use a different charger and cable to rule out a poor cable.

The device feels hot. Stop using it immediately, unplug it if it is charging, and let it cool on a hard surface away from anything flammable. Do not use it again if it is swollen, if it smells strongly, or if it gets hot while idle. Contact us and do not charge it.

If none of this solves the problem, get in touch with your order number and a short description. A clear photo of the pod and the contacts speeds things up.

Value for money and how it compares

Value in a pod kit is the sum of the upfront price, the cost of pods and e-liquid, and how long the hardware lasts. The Xlim Go 2 sits in the entry to mid-priced bracket for refillable pod kits, and on a per-week basis it generally costs less than disposable-style products ever did. A 10ml bottle of nicotine salt costs a few pounds and fills a 2ml pod about five times. A pod replacement every two weeks or so adds a small amount. Over a month, the running cost of a moderate user is typically lower than buying single-use devices at their old pricing, and a fraction of the cost of smoking.

It also makes sense to compare it with its direct rivals honestly. These are fair comparisons, and in each case we say where the other product has the edge:

• Vaporesso XROS series: the closest rival in size and approach. XROS kits have a broad range of pods, similar battery capacity in the popular models, and adjustable airflow on some versions. They are very capable alternatives, and if you already like XROS pods, there is little reason to switch. The Xlim Go 2 is the more compact option in most comparisons.
• Voopoo Vmate and Vmate-style kits: similar draw-activated design and flavour. Some versions have a slightly larger battery. They are close to the Xlim Go 2 in price and use, so choose on colour, availability and which pods you can find.
• SMOK Novo series: long established, with a huge pod range. Some Novo kits offer larger batteries and more power, though the bodies can be thicker. A good option if you want more output.
• Geekvape Wenax series: sturdy, compact and well-liked. Slightly different pod format, and similar performance. Some models in the line offer a higher wattage.
• Larger OXVA kits such as the Xlim Pro or the Xlim SE line: these offer more power options, bigger batteries or more adjustment. If you want more control, they are the natural step up. If you want simplicity and a smaller body, the Go 2 is the more suitable choice.

Where the Xlim Go 2 does well is in being small, simple and low-cost to run, with a pod family that is easy to find in the UK. Where it falls short is power and adjustability: if you want a bigger battery, a screen or wattage control, you should look at larger kits. No fixed ranking applies to everyone, because the right device is the one that fits how you vape.

A few tips to improve value. Buy your e-liquid in 10ml bottles and use nicotine salt strengths that match your use, so you are not wasting liquid. Buy pods in multi-packs when they are available. Keep the device clean and avoid overfilling, which reduces leaks and extends pod life. And when the device reaches the end of its life, recycle it at a drop-off point instead of throwing it in the bin.