FreeMax Fireluke M Coils (Pack of 5)

Overview

The FreeMax Fireluke M Coils (Pack of 5) by Freemax in Mesh 0.15Ohm at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

FreeMax Fireluke M Coils Pack of 5: What You Are Buying

The FreeMax Fireluke M coils (pack of 5) are replacement mesh coil heads made by Freemax for the Fireluke M tank system. Each pack contains five individual coil heads, which for most people works out at somewhere between two and four months of use, depending on how often you vape, which wattage you run and what kind of e-liquid goes through them. If you already own a Fireluke M device and the flavour has started to flatten out, or the vapour has become noticeably thinner than it used to be, a fresh coil is the single most effective thing you can do to bring the setup back to how it behaved when it was new.

Freemax is a Shenzhen-based manufacturer known for mesh coil tanks and sub-ohm hardware, and the Fireluke range is one of its longer-running lines. The M in the name points to the mesh-based coil architecture. Instead of a single round wire wrapped around a cotton core, a mesh coil uses a thin, perforated sheet of resistance material folded into a shape that sits against the wicking cotton. That sheet touches far more of the cotton than a wire would, which is the whole reason this format exists: more surface area, more even heating and a more consistent result puff after puff.

This is a consumable product, not a device. You cannot vape with the coils on their own, and they are only intended for tanks designed to accept the Fireluke M coil head. Before you buy, check the model name printed on the base of your tank or on the original box. If it says Fireluke M, you are in the right place. If it says a different Freemax model, such as a Mesh Pro or Maxluke tank, those use different coil heads and the Fireluke M coils will not fit.

The listing offers two variants. In coil terms, variants normally differ by resistance, and resistance changes everything about how a coil behaves: how much power it wants, how warm or cool the vapour feels, how quickly it uses up liquid and how long it lasts. We cover how to choose between them in the sections below, so you can match the variant to your device, your wattage preference and your usual e-liquid.

A quick note on what this page is and is not. It is a plain-English guide to the coils written for UK vapers who want to know what they are paying for. It does not make health claims, and these products are intended for adults only. If you do not already vape, nicotine products are not a good idea to start. If you are a smoker looking to switch, speak to your local stop smoking service or pharmacist about the options available to you.

Performance and Vapour Delivery

Performance with a mesh coil is easiest to describe in terms of consistency. A conventional round-wire coil heats along a narrow strip, so the part of the cotton closest to the wire gets hot first and the outer cotton lags behind. A mesh coil heats a wider band almost at once. In everyday use that shows up as faster ramp-up when you press the fire button, fewer dry or harsh puffs when you chain vape, and a smoother vapour temperature across the length of a draw.

What you can realistically expect from the Fireluke M coils:

• Quick response. The coil reaches working temperature within a fraction of a second of pressing the button, so there is very little of the delay that some older coil designs had.
• Dense, even vapour. A lower resistance variant, run at the upper end of its recommended power range, produces a thick, cool cloud that suits direct-to-lung inhaling. A higher resistance variant, run lower, produces a tighter, warmer draw.
• Steady output over the life of the coil. Mesh tends to hold its performance for most of the coil life and then decline fairly sharply at the end, rather than fading gradually from day one.
• Predictable liquid use. Lower resistance and higher wattage means you will go through e-liquid faster. That is not a flaw; it is simply the cost of bigger vapour.

It is worth being honest about the trade-offs. A coil designed for high power will use more liquid and more battery than a coil designed for gentle, mouth-to-lung vaping. If you are used to a small pod device and move to a sub-ohm style tank, the first few days can feel like a lot: warmer, bigger puffs and a bottle that empties quicker than you expected. Start at the low end of the wattage range printed on the coil, take a few test puffs, and move up in small steps of one or two watts until the draw feels right.

Always use the wattage range printed on the coil base or on the pack. Running a coil well below the minimum gives a lukewarm, muted draw and can cause the cotton to gurgle and flood. Running it well above the maximum burns the cotton, shortens coil life dramatically and produces a harsh, burnt taste that will not go away. The recommended range exists because the coil, the cotton and the airflow have all been tuned together, so staying inside it is the simplest way to get the performance the coil was built to deliver.

Airflow matters just as much as power. Open the airflow ring fully for cooler vapour and a looser draw. Close it down for a warmer, more concentrated draw and stronger flavour. Because mesh coils tend to run cooler than wire coils at the same wattage, many users find they can run slightly higher power than they expect without the vapour becoming uncomfortable.

Flavour Profile: What a Mesh Coil Does to Your E-Liquid

A coil does not have a flavour of its own, but it has a large say in how the e-liquid you put through it tastes. With the Fireluke M coils, the usual description is clean and well rounded rather than sharp or aggressive. The wide heating surface vaporises the liquid at a more even temperature, and that tends to keep delicate top notes, such as citrus peel, mint or light berry, intact instead of cooking them off.

Here is how that plays out in practice across common e-liquid styles:

• Fruit and fruit ice. Mesh coils tend to handle these well. You get the sweetness and the fruit character without the muddy, over-toasted note that a coil running too hot can produce.
• Menthol and mint. Cooler vapour keeps the cooling sensation crisp. If you find menthol too sharp, open the airflow a little and drop the power by a watt or two.
• Desserts, custards and bakery blends. These are higher in sweeteners and flavouring, which means they build residue faster. Expect shorter coil life with these liquids, and consider choosing the higher resistance variant to reduce the load on the cotton.
• Tobacco styles. These are more delicate than they look. A slightly warmer draw, from a higher resistance coil or a more closed airflow, usually gives a fuller tobacco character.

Several habits make a measurable difference to flavour. Prime the coil properly before the first puff, which we explain in the how-to section. Keep the tank above the minimum level so the cotton never runs dry. Avoid switching constantly between very different flavours in the same coil, because a coil that has run a heavy dessert liquid will carry some of it into the next bottle for a while. If you like to rotate flavours, either accept a short crossover period or fit a fresh coil when you change to something quite different.

Sweeteners are the main enemy of a coil. Liquids with a lot of sucralose or heavy dessert flavourings caramelise on the mesh, leaving a thin film that dulls the flavour and eventually causes a burnt taste. This is why two people can get very different coil lifespans from the same pack: one runs light fruit and gets weeks from each head, while the other runs thick dessert blends and finds the flavour fading in a few days. Neither is wrong, but it is a useful reason to buy coils in a multipack, because you will use them at your own pace and the cost per coil drops accordingly.

Design and Build Quality

The Fireluke M coil is a self-contained head made up of a metal housing, a resistance mesh element, organic-style cotton wicking and a sealed base with the electrical contact. The housing slots into the tank base and sits against the airflow channel. Liquid enters through wicking holes in the side of the housing, soaks the cotton and then reaches the mesh, where it is heated and turned to vapour.

What to look at when you open a pack:

• Clean, even mesh. The mesh should look uniform with no visible kinks, bends or gaps. Small differences in appearance are normal because the element is folded by hand or by machine, but anything crushed or lopsided suggests damage in transit.
• Tidy cotton. The wick should be neatly seated, not spilling out of the housing or visibly frayed.
• Intact seals. The silicone ring or seal around the head should be present and sit flat. A missing or torn seal is the most common cause of leaking after a coil change.
• Clearly marked specifications. The resistance and the recommended wattage range should be printed on the base or the housing. If you cannot find them, check the pack insert.

Build quality in this category is about consistency between coils as much as about any single coil. A five-pack of mesh coils from a mainstream manufacturer generally has a low dud rate, but it is never zero. Occasionally a coil will gurgle, spit or taste off from the first puff even after a proper prime. If that happens, try a second coil from the pack before deciding that something is wrong with the tank. If more than one coil in the same pack behaves the same way, contact us and we will help sort it out.

Keep the packaging until you have used all five heads. The pack tells you which resistance you bought, and mixing up resistances is one of the easiest mistakes to make when you have a drawer full of loose coils. A good habit is to write the install date on a small label on the pack each time you fit a new one, so you can see how many days each coil lasts and judge when the next one is due.

Storage matters too. Keep unused coils in their sealed packaging, away from heat, direct sunlight and damp. Cotton absorbs moisture from the air, and a coil that has been sitting in a humid bathroom or a hot car can behave oddly on first use. A cool drawer is all they need.

Battery, Charging and Power Pairing

The coils themselves contain no battery. The power comes from the device they are fitted to, and the way you manage that battery has a direct effect on how the coil performs. A mesh coil at its recommended wattage draws a meaningful amount of current, so a tired battery shows up as weak vapour, a delayed response or the device cutting out, long before the coil is actually worn.

Practical points for pairing the coils with your device:

• Match the wattage to the variant. Check the range printed on the coil and set your device inside it. If your device has a fixed output, make sure that output falls inside the range for the variant you choose.
• Charge before the battery is flat. Lithium-ion cells prefer to be topped up regularly rather than run to zero. A device that is allowed to go fully flat repeatedly will lose capacity faster.
• Use the right charger. Charge through the USB-C or micro-USB port using a reputable charger and a good-quality cable. Avoid cheap unbranded chargers, which can deliver unstable voltage.
• Never charge unattended or under a pillow. Charge on a hard, non-flammable surface and stop charging if the device becomes hot, swollen or smells odd.
• Do not leave a device charging overnight. Unplug it once it is full.

If your device uses removable cells, treat them with the same care you would any lithium-ion battery. Use only the cell type specified by the manufacturer, keep the cells in a case when they are not in the device, and never carry loose cells in a pocket with keys or coins. Replace any cell with a torn wrapper straight away.

How much battery should you expect? That depends entirely on the device, the wattage and your vaping style. As a general guide, a single full charge of a typical built-in battery gives a day of moderate use at around 30 to 40 watts, but a lower resistance coil at higher power will empty the same battery in half the time. If you are noticing a sharp fall in battery life after a coil change, the new coil is probably drawing more power than the old one, which usually means you changed variants or the wattage setting has changed.

When a battery reaches the end of its life, do not put it in household rubbish. Take disposable batteries and vape devices to a recycling drop-off point, such as a household waste recycling centre or a participating retailer. The same applies to used coils: they contain small amounts of metal and are better recycled than binned.

Mesh Coil Technology Explained

Understanding what a mesh coil is makes it much easier to choose the right variant and to get the most out of each head. The idea is simple. Instead of heating a round wire wound around a cotton core, the coil uses a flat strip of woven or perforated resistance alloy, folded or rolled into a shape that presses into the wicking cotton. Because the mesh makes contact over a wide area, the heat is spread more evenly and the e-liquid is vaporised across a larger surface.

The practical benefits of the mesh approach are:

• Larger heating area. More contact with the cotton means more liquid vaporised per second without needing extreme wattage.
• Faster ramp-up. The thin material heats quickly, which is why the response feels almost instant.
• Even temperature. Hot spots are less likely, so the cotton is less prone to scorching in one place.
• Better flavour retention. A more even temperature protects delicate flavour compounds.

There are also trade-offs. Mesh coils are often more sensitive to wattage than round-wire coils. Push them too high and the thin material overheats quickly. They also tend to be more sensitive to residue build-up, because a film across the mesh has a bigger effect on heat transfer than a film on a thin wire. And because they are built to vaporise a lot of liquid, they can flood if the airflow is too tight or if the tank is overfilled.

Resistance is the number you will see on the coil, measured in ohms. The lower the resistance, the more current the coil draws at a given voltage, and so the more heat and vapour it produces. In rough terms, lower-resistance mesh coils are the choice for large, cool, direct-to-lung inhales, while higher-resistance variants suit a tighter draw, a lower wattage and a lighter battery load. If you are not sure which suits you, think about what you are replacing: if your current coil gives you the kind of draw you like, buy the same resistance again. If you want a warmer, tighter draw, move one step up in resistance. If you want more vapour, move one step down.

Finally, remember that every coil is a wearing part. The mesh slowly oxidises, the cotton gradually breaks down and residue builds up. None of this can be reversed, which is why coils are sold in multipacks and why trying to clean a mesh coil rarely helps beyond the first week or so.

Nicotine Strength Guidance for Mesh Coil Vaping

The coil does not contain nicotine, but it has an important influence on how strong a given e-liquid feels, so nicotine strength is worth thinking about when you pick a variant. In the UK, nicotine e-liquid is capped at 20mg/ml, and bottles are limited to 10ml, while refillable tanks are limited to 2ml in size. Single-use disposable vapes can no longer be sold in the UK as of 1 June 2025, which is one reason more adults have moved to refillable systems and replacement coils like these.

Here is a sensible way to think about strength:

• Lower-resistance coils with high power (direct-to-lung). These produce a lot of vapour per puff, so each puff delivers more nicotine. Most people use low strength here, typically 3mg/ml to 6mg/ml of freebase nicotine, or a low-strength nicotine salt. Using a 20mg liquid in a high-power setup is likely to feel harsh and overwhelming.
• Higher-resistance coils with moderate power (restricted lung). Smaller puffs and a warmer draw suit higher strengths. Nicotine salts at 10mg/ml to 20mg/ml are the usual choice in this style.
• Switching from smoking. People who smoked heavily often need a higher strength to begin with, then reduce gradually as they settle in. Be guided by how you feel rather than a rule. If you get headaches, nausea, dizziness or a very harsh throat hit, drop the strength.

Throat hit also depends on the liquid base. A higher proportion of propylene glycol gives a sharper throat hit; a higher proportion of vegetable glycerine gives smoother, thicker vapour. Mesh coils generally prefer a balanced or VG-leaning liquid, because very thin, PG-heavy liquids can pass through the cotton so quickly that the wick struggles to keep up.

If you find the throat hit too strong at your current setting, there are three easy fixes that do not involve switching liquids. Lower the wattage by a couple of watts. Open the airflow a little further. Or take shorter puffs. All three reduce the amount of vapour per puff and so reduce the amount of nicotine delivered.

Nicotine is addictive, and it is not suitable for children, non-smokers, pregnant or breastfeeding women, or people with certain medical conditions. If you are not sure, ask your pharmacist or GP. You must be 18 or over to buy from us, and we may ask for age verification at checkout or on delivery.

Who These Coils Are For (and Who Should Skip Them)

These coils are a straightforward fit for one group of people: anyone who already has a Fireluke M tank and needs replacement heads. Beyond that, they suit a few specific kinds of vaper better than others.

They are likely to be a good match if you:

• Already use a Fireluke M device and want to keep running it without buying a new tank.
• Prefer a smooth, flavour-led draw over the sharp, hot vapour that some older coil styles produce.
• Want to buy in bulk. A pack of five lowers the cost per coil and means you always have a spare when a coil fails on a Sunday evening.
• Vape regularly. Daily vapers get the most value because they will use all five coils before the cotton ages in the packaging.
• Like to adjust your setup. Two variants let you move between a tighter draw and a bigger cloud depending on your liquid.

You may want to think twice if you:

• Do not own a compatible tank. The coils are useless on their own, and they will not fit tanks from other ranges.
• Vape only occasionally. If a coil lasts you three months or more, a five-pack may be more than you need, because cotton that sits for a long time can pick up moisture. Occasional vapers may be better off buying smaller quantities.
• Prefer very small, discreet devices. Mesh coils are built for substantial vapour. Small pod systems with built-in coils are a better fit.
• Are a complete beginner. Someone who has never vaped before should get advice at a local vape shop or from a stop smoking service rather than starting with a sub-ohm style setup.

A final category worth mentioning is people who are curious about vaping without smoking. Vaping is not risk free, and nicotine is addictive. If you do not currently smoke, there is no health benefit to starting, and we would encourage you not to. These coils are intended for adult smokers and existing vapers.

How to Install, Prime and Use the Coils

Fitting a new coil takes about five minutes if you follow the steps in order. Most flavour and leaking complaints trace back to skipping the priming stage, so it is worth taking your time.

The steps, in order:

• 1. Empty and unscrew. Turn the device off, empty any remaining liquid from the tank and unscrew the base. Remove the old coil by pulling or unscrewing it straight out of the base.
• 2. Clean the tank. Rinse the tank, base and airflow ring in warm water and dry them thoroughly with a lint-free cloth or kitchen paper. Any old residue left in the base can taint the flavour of the new coil.
• 3. Check the new coil. Make sure the seal is in place and the resistance matches what you ordered.
• 4. Fit the coil. Push or screw the new head firmly into the base. It should sit flush with no gap.
• 5. Prime the cotton. Put three or four drops of e-liquid directly onto the cotton through the wicking holes. Do not drown it, but make sure the visible cotton is damp all the way around. Then let the coil rest for at least five minutes, ideally ten, so the liquid can saturate the wick.
• 6. Refill the tank. Reassemble, fill the tank to just below the maximum line and wait another few minutes.
• 7. Take a few dry pulls. Without pressing fire, draw gently on the mouthpiece a few times to pull liquid through the wick. This is the step most people skip.
• 8. Start low. Fire the device at the bottom of the recommended wattage range for a few puffs, then increase in steps of one or two watts until the draw feels right.

Day-to-day habits that extend coil life:

• Keep the tank at least a third full. A coil that runs low on liquid dries out and burns.
• Take pauses between puffs when you are chain vaping. Thirty seconds lets the cotton refill.
• Do not press the fire button without inhaling, which heats the coil without cooling it with airflow.
• Avoid leaving the tank on its side or in a hot place, which encourages leaking.

Never vape or charge a device if it is damaged, and never modify the coil or the tank. Keep your vaping equipment out of reach of children and pets. Liquid that contains nicotine is toxic if swallowed and can be absorbed through skin, so wipe up spills promptly.

Troubleshooting Common Coil Problems

Almost every coil problem has a simple cause. Work through the checks below before assuming that the coil is faulty.

• Burnt taste straight after a coil change. The coil was not primed properly. Remove it, add more e-liquid to the cotton, wait ten minutes and try again at a lower wattage.
• Gurgling or spitting. The coil is flooded. Wipe the drip tip, blow gently back through the mouthpiece with the airflow open to clear the chimney, and take a few lower-power puffs. If it keeps happening, check that the coil is seated properly and the seal is intact.
• Leaking from the airflow slots. The most common causes are a worn or missing seal, an overfilled tank or a coil that is not screwed down fully. Dismantle, dry everything, reseat the coil and refill to just below the maximum line.
• Weak vapour or muted flavour. Either the coil is nearing the end of its life or the wick is not getting enough liquid. Try more priming time. If the problem returns within a day or two, change the coil. A low battery can also cause thin vapour.
• Dry hits (hot, harsh puffs). The wick is running short of liquid, usually from a low tank, too much power or a very thick liquid. Refill, reduce power and let the coil rest. If you get a dry hit once, the coil may be fine. If you get it repeatedly, the cotton has probably burnt and the coil needs replacing.
• Device shows an atomiser or short circuit error. Unscrew the tank, check that the coil is making proper contact with the base and clean the contact points gently. If the error persists with a second coil, the fault is likely in the device or the tank thread.
• Gunk or black residue on the mesh. This is normal late in a coil life. Residue builds on the mesh from sweeteners and flavourings, and it is the main reason flavour fades.

How do you know when to replace a coil? Look for a combination of signs: flavour dulling that priming does not fix, a burnt or metallic note, thin vapour at normal power, or dry hits that return. One of those signs on its own is not conclusive. Two or more together almost always mean it is time to fit the next coil from the pack.

If you work through these steps and the problem remains on more than one coil, stop using it and get in touch. We will help you establish whether it is a coil batch issue, a tank fault or simply a setting that needs adjusting.

Coil Lifespan and Value for Money

Value with a consumable comes down to cost per week of vaping, not the sticker price of the pack. A five-pack gives you five replacement heads, and what each one is worth to you depends on how long it lasts in your hands.

Typical lifespan, as a rough guide rather than a promise:

• Light fruit or tobacco liquids at moderate power: around one to three weeks per coil for a daily vaper.
• Sweet dessert or heavily flavoured liquids: often one week or less, because residue builds faster.
• High power at the top of the range: shorter, because the mesh and cotton are working harder.
• Careful priming, low-to-mid power and a clean tank: noticeably longer.

If a coil lasts you ten days, a pack of five gives you around fifty days of use. That is why a multipack is the sensible way to buy: the per-coil price is lower than buying single heads, you are covered for a replacement over the next few weeks and you avoid paying extra delivery on small orders.

There is also a hidden cost in running an old coil. A worn coil makes you chase flavour by increasing power, which uses more battery and more liquid. Replacing a coil at the right time often pays for itself in saved e-liquid. On the other hand, replacing a coil too early is wasteful, so it is worth trusting your senses: if the flavour is good and the vapour is steady, the coil still has life in it.

Compared with a single-use disposable, which can no longer be sold in the UK anyway, a refillable system with replaceable coils is generally cheaper per week for anyone who vapes daily and produces much less waste. A coil head is small, and a pack of five is a modest amount of material compared with the many disposables a regular vaper might have gone through in the same period.

Finally, think about total cost across the whole system: tank, coils, e-liquid, power. If you already own the tank, coil packs are the main recurring expense apart from liquid, and a five-pack from a mainstream manufacturer sits in the mid-range for the category. You are paying for tested hardware, consistent quality and the reassurance of a coil designed for your specific tank, rather than a cheaper unbranded alternative that may not fit as accurately or perform to the same standard.

How the Fireluke M Coils Compare With Alternatives

Choosing coils is rarely about finding a single winner. Different systems have different strengths, and it is fairer to compare on the things that matter to you. Here is how the Fireluke M coils sit against the main alternatives UK vapers consider.

• Against Vaporesso GTX and similar mesh coil ranges. Both are mesh-based and both aim at smooth flavour and quick response. Vaporesso has a very wide range of resistances and a large installed base, so you will find its coils in more shops. Freemax coils are generally competitive on price, and the best choice is usually whichever tank you already own.
• Against Voopoo PnP coils. PnP is one of the most widely used plug-and-play formats, with many resistance options and broad availability. Fireluke M coils belong to a narrower range, so the choice of resistances is smaller, but you still get the core mesh benefits.
• Against Smok mesh coils. Smok has a long track record and a huge catalogue. Its coils are easy to find. The Freemax range is less sprawling, which some people prefer because there is less to get wrong when ordering.
• Against Geekvape and Uwell pod coils. Pod systems with replaceable coils are smaller and simpler, and they suit lower power and tighter draws. The trade-off is lower output and less flexibility than a tank system.
• Against generic or unbranded copies. Cheap compatible coils may fit and may even work, but quality varies widely. Poor wicking, off-spec resistance and weak seals are the usual complaints, and some can be a safety risk. We would suggest sticking to the original manufacturer.

Being fair, there are situations where another system is the better call. If you want the widest possible choice of coil resistances, a larger platform such as GTX or PnP gives you more options. If you want maximum simplicity, a closed pod system with a sealed coil is easier still. And if you want the lowest possible running cost, a rebuildable atomiser with hand-made coils will beat any pre-made head, though it demands skill, equipment and care.

Where the Fireluke M coils make sense is simple: you own the tank, you want a straightforward replacement, and you like a smooth mesh draw without fuss. In that situation, there is little reason to look elsewhere, and a five-pack keeps you supplied for a good while at a reasonable cost.

Whichever route you take, remember that used coils, batteries and old devices should go to a proper recycling point, not into household rubbish. Many household waste recycling centres and some retailers accept them, and it is worth a few minutes to find your nearest drop-off.