SMOK Arco E1 Pod Kit Purple Gradient

Overview

The SMOK Arco E1 Pod Kit Purple Gradient by Smok in Purple Gradient at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

SMOK Arco E1 Pod Kit overview

The SMOK Arco E1 Pod Kit is a compact, refillable pod vape built for adults who want a straightforward mouth-to-lung (MTL) experience without paying extra for features they will never use. It pairs a built-in 1300mAh rechargeable battery with a 2ml top-fill pod, inhale activation, adjustable airflow and a Smart Mode that chooses an output for you, up to a ceiling of 30W. At £7.95 the kit sits firmly in the entry-level bracket of the refillable market, and it is sold here in seven colours: Black, Blue Cyan, Blue Gold, Mineral Green, Pink, Purple Gradient and Silver.

SMOK has made pod and tank hardware for many years, and the Arco family reflects that experience in a deliberately uncomplicated way. Alongside the Arco E1 you will find the SMOK Arco Digi Pod Kit and a bundle that adds pods and nicotine salt e-liquid, so you can start with the cheapest option and move up later if you want more control. The Arco E1 is the simplest of the three: put e-liquid in the pod, click it into the body, and draw.

It helps to be clear about what this product is and is not. The kit is a reusable, rechargeable device. It does not contain e-liquid and it does not contain nicotine. You buy the e-liquid separately, in a UK-legal bottle of no more than 10ml, in whichever flavour and nicotine strength suits you, and you fill the 2ml pod yourself. That is the trade-off with any refillable system: a little more effort in exchange for far more choice, and a lower cost per millilitre than most prefilled alternatives.

This page is a detailed guide written for UK adults aged 18 or over. It covers the following ground so you can decide whether the Arco E1 fits the way you vape:

• The headline specifications and what each number means in practice
• How the kit performs, how long a pod lasts and what to expect from the draw
• Flavour pairing, since the device itself has no flavour of its own
• Design, colours and build quality at this price
• Battery life, charging and sensible charging habits
• Pod and mesh coil technology, including the 0.6 ohm and 0.8 ohm choices
• Nicotine strength guidance under the UK 20mg limit
• Who the kit suits, who should look elsewhere, setup, troubleshooting and value

Please note: nicotine is addictive. This kit is intended for adult smokers and existing vapers. It is not suitable for non-smokers, for anyone under 18, or for anyone who has been advised by a medical professional to avoid nicotine.

SMOK Arco E1 specifications at a glance

Before going into detail, here is a plain summary of the hardware. These figures come from the manufacturer and retailer listings for the Arco E1 range, and where a detail is not published we say so rather than guess.

• Battery: 1300mAh, built in and rechargeable. It is not designed to be swapped out by the user.
• Charging: USB-C. The listing for the Arco E1 bundle quotes roughly 60 minutes for a full charge and notes that the cable is sold separately, so have a USB-C cable ready.
• Output: Smart Mode, which automatically adjusts the wattage to suit the pod fitted, up to a maximum of 30W.
• Activation: inhale (draw) activated, with no need to hold a fire button while you vape.
• Airflow: adjustable, covering a tight MTL draw through to a looser restricted direct-to-lung (RDTL) draw.
• Pod capacity: 2ml, the maximum allowed for refillable pods sold in the UK.
• Fill method: top fill, designed to be clean and leak-resistant.
• Coil: built into the pod. A 0.6 ohm mesh pod is supplied with the kit, and replacement pods are available in 0.6 ohm and 0.8 ohm versions.
• Colours: Black, Blue Cyan, Blue Gold, Mineral Green, Pink, Purple Gradient and Silver.
• Price: £7.95 for the kit on its own.
• Nicotine content: none. The kit ships without e-liquid.

A quick word on how to read these numbers. Milliamp-hours (mAh) describe how much charge the battery can store, so a larger figure generally means more vaping between charges. Watts describe how hard the device drives the coil, which affects vapour temperature, vapour volume and how quickly e-liquid is used. A ceiling of 30W is modest by the standards of larger mod-style devices, but it is well matched to a 2ml pod with a small mesh coil, where pushing much harder would simply scorch e-liquid.

We have deliberately not quoted a puff count. Prefilled vapes advertise one because the e-liquid quantity is fixed. With a refillable kit the number depends entirely on your e-liquid, your resistance choice, your airflow setting and your draw length, so any single figure would be marketing rather than information. The performance section below gives a realistic planning guide instead.

Performance and puff delivery

The Arco E1 is an MTL-first device. You draw slowly and steadily, hold the vapour briefly in your mouth, then inhale. With the airflow tightened, the draw feels close to a cigarette: some resistance, a warm and fairly concentrated vapour, and a throat sensation that suits nicotine salt e-liquids. Opening the airflow gives a looser, cooler and airier draw, which is where the RDTL description comes from. It will never behave like a sub-ohm tank, and it is not trying to.

Because the device is draw-activated, vapour begins as soon as you inhale. There is no button to hold and no temperature or wattage to set. Smart Mode reads the pod fitted and applies a sensible output, up to the 30W ceiling. For a newcomer this removes the most common source of bad experiences with refillables, which is setting the wattage too high and burning a fresh coil.

How many puffs should you expect? As a rough planning guide, a 2ml pod filled with nicotine salt e-liquid gives somewhere in the region of a few hundred puffs, and a moderate user will often get half a day to a full day from one fill. Heavy users may refill twice a day. These are estimates, not specifications, and several factors move the figure up or down:

• Resistance: a 0.6 ohm pod runs warmer and uses e-liquid faster than a 0.8 ohm pod, so it empties sooner.
• Airflow: a more open setting produces bigger, cooler puffs and tends to use more e-liquid per draw.
• Draw length: long, hard pulls drain the pod and the battery faster than short, gentle ones.
• E-liquid thickness: a 50/50 or PG-leaning liquid wicks quickly through a small mesh coil, whereas a very thick, high-VG liquid can struggle to keep up.
• Pod age: a coil nearing the end of its life delivers less flavour and less vapour for the same effort.

Consistency is good provided you keep the pod reasonably topped up. A mesh coil needs a steady supply of e-liquid, and drawing on a pod that is almost empty is the quickest route to a dry, harsh hit. As a habit, refill once the liquid drops to about a third of the pod rather than waiting for it to run dry.

What the Arco E1 does not do is also worth stating plainly. It does not produce large clouds, it has no manual wattage control, and it will not suit anyone who enjoys a warm, loose, high-volume draw. If that describes you, a sub-ohm kit is a better match than this one.

Flavour profile and choosing the right e-liquid

The SMOK Arco E1 has no flavour of its own. Everything you taste comes from the e-liquid you put in the pod, and the job of the hardware is to deliver it cleanly. The colour names on the product page (Black, Blue Cyan, Blue Gold, Mineral Green, Pink, Purple Gradient, Silver) describe the body of the kit, not a taste, so choose them for looks and choose your flavour separately.

Mesh coils spread heat across a wide surface, which generally gives a more even vaporisation than a single round wire. In practice that tends to mean clearer, more defined flavour with less of the muddy or burnt note that appears when a coil is overdriven. Paired with the modest 30W ceiling, the Arco E1 is well suited to light, crisp e-liquids. These are the flavour families that work comfortably in an MTL pod:

• Menthol and mint: clean and cooling, and a common choice for adults moving away from tobacco taste.
• Ice-based fruits: fruit with a cooling finish keeps its character well in a small mesh pod.
• Strawberry: sweet and familiar, available in many blends from simple to layered.
• Blue raspberry: a bright, tangy profile that comes through clearly at MTL temperatures.
• Watermelon: light and juicy, pleasant at both 0.6 ohm and 0.8 ohm.
• Banana: creamier and softer, often blended with ice or berry.
• Tobacco: for those who want something closer to what they are leaving behind.

Thick dessert, custard and cream liquids deserve a note of caution. They are fine to enjoy, but their sweeteners and heavier bases build up on a small coil faster than fruit or menthol blends, so a pod running dessert flavours may need replacing sooner. If you love that style, keep a spare pod handy and replace at the first sign of dullness.

Switching flavours is simple but not entirely clean. A pod holds onto traces of the previous liquid in its cotton, so moving from a strong menthol to a delicate fruit in the same pod will leave some ghosting for a while. The tidy solution is one pod per flavour family: a menthol pod, a fruit pod, and so on. Replacement pods are inexpensive enough that this is a realistic habit.

When you do notice flavour fading, work through the simple checks first: is the pod topped up, is the airflow set sensibly, and is the e-liquid a suitable thickness? If those are fine, a tired coil is the usual explanation and a fresh pod restores the taste.

Design, build quality and colours

The Arco E1 is compact and pocket-friendly, designed to slip into a jacket or a bag without the bulk of a mod-style device. The body holds the battery and electronics, and the 2ml pod seats into the top, so the overall shape is a slim, easy-to-grip rounded rectangle rather than a cylinder. We do not quote exact dimensions or weight here because they are not stated consistently across listings, but the photographs on the product page give a good sense of scale, and it is comfortably a one-hand device.

Seven colours are offered, and they split naturally into two groups:

• Understated: Black and Silver are the low-profile choices, easy to live with and least likely to look dated.
• Colour-forward: Blue Cyan, Blue Gold, Mineral Green, Pink and Purple Gradient add personality. The gradient and two-tone finishes in particular look striking in photographs and in daylight.

On build quality, expect what a roughly £8 device honestly delivers. The finish is clean and the body feels solid enough for daily carrying, but it is not a premium, machined product. Glossy and gradient surfaces show fingerprints and fine scratches sooner than matte ones, and anything kept loose in a pocket or bag with keys or coins will pick up marks. A small pouch or a separate pocket solves this at no cost.

The pod is the part that sees the most handling. It clicks into the body, and it is worth getting into the habit of pressing it home fully every time you refill. A pod that is slightly out of seat is behind a surprising number of fire failures and leaks, and the fix costs nothing. The fill port is designed to be accessible without taking the pod apart, which keeps refilling tidy.

The adjustable airflow is the other design feature that matters. Having a physical control for the draw lets one device serve two styles: tighten it for a cigarette-like MTL pull, open it for something airier. It is simple, there are no menus, and there is nothing to configure, which is exactly the point for a first refillable device.

Finally, remember that this is a built-in battery device. Treat it with the care you would give any rechargeable gadget: keep it out of heat, avoid dropping it on hard floors, and keep it dry. The device is not waterproof, so a quick wipe with a dry cloth is the right cleaning method, not a rinse.

Battery life and charging

The built-in battery is rated at 1300mAh. For a device that tops out at 30W and spends most of its time at a much lower effective output, that is a generous allowance for a pod kit at this price, and it is one of the main reasons to choose the Arco E1. Many users report that a battery of this size lasts a full day of moderate vaping before it needs attention, although heavier use, a lower battery temperature and an open airflow all reduce that.

Charging is by USB-C, which is the most convenient connector to live with because the same cable probably already charges your phone, headphones or laptop. The bundle listing for the kit quotes around 60 minutes for a full charge. Please note that the same listing states the cable is sold separately, so check what is in your basket and have a suitable cable to hand before the parcel arrives.

A few sensible habits will keep the battery healthy and safe:

• Use a standard 5V USB adapter or computer port. A reputable phone charger is fine. Avoid unbranded or damaged chargers and cables.
• Do not charge unattended or overnight on soft furnishings. Charge on a hard, clear surface where you can see the device.
• Do not vape while it is plugged in. Let it charge, then unplug before use.
• Avoid heat. A parked car in summer or a spot next to a radiator is a poor place to leave any lithium battery.
• Top up before it hits empty. Regular partial charges are gentler on a lithium cell than repeatedly running it completely flat.
• Stop using it if it swells, gets unusually hot or smells odd. Move it somewhere safe and away from anything flammable, and contact the retailer.

You can stretch each charge in a few simple ways. A 0.8 ohm pod draws less power than a 0.6 ohm pod, so it generally gives longer battery life. Shorter draws use less than long ones. Keeping the airflow a little tighter lowers the amount of e-liquid vaporised per puff, which also eases the load.

At the end of its life, the battery cannot be removed by the user, so the whole device needs recycling. Never put a vape in household waste or kerbside recycling bins, because lithium batteries can start fires in refuse vehicles and sorting plants. Use a household waste recycling centre or a retail drop-off point for small electricals and batteries, and remember that shops which sell vapes in the UK are expected to offer a take-back route. Empty any remaining e-liquid from the pod first.

Pod and mesh coil technology

The Arco E1 uses a pod with the coil built in. In other words, the pod is both the e-liquid reservoir and the heating element, and when the coil wears out you replace the whole pod rather than fitting a new coil head. For the user this is a major convenience: there is no coil priming ritual with loose heads, no tiny parts to lose and no risk of fitting the wrong coil.

Inside the pod is a mesh coil rather than a traditional round wire. A mesh coil is a thin, perforated sheet of resistance metal that sits against the cotton. Because the heating surface is wide and flat, e-liquid is heated more evenly, which supports consistent flavour and quick warm-up. The pods are described with organic cotton wicking, which is a common choice for clean, neutral flavour delivery.

Two resistance options are available:

• 0.6 ohm: the pod supplied with the kit. It runs warmer, produces a fuller vapour, and brings out sweeter flavours well. It uses more e-liquid and more battery, and it suits those who want a looser, more generous draw.
• 0.8 ohm: a slightly tighter and cooler option that sips e-liquid and battery more slowly. It is the better choice for an MTL purist and for stronger nicotine salt strengths.

Wording on retailer pages varies slightly between a 0.6 ohm mesh description and a 0.6 ohm dual-coil description for the replacement pods, so always read the variant name when you order replacements and match it to what you want.

How long does a pod last? There is no fixed figure, but a typical range for a built-in coil pod is one to three weeks of regular use. Several things shorten that:

• Very sweet or dessert-style e-liquids, which leave residue on the mesh
• Thick, high-VG liquids, which wick slowly and encourage dry hits
• Frequently running the pod close to empty
• Chain vaping, which gives the coil no time to recover and re-wet

Filling is straightforward. Fill to just below the maximum mark, avoiding the central airflow tube, and allow a few minutes for the cotton to soak before the first draw. This priming step prevents the single most common cause of a burnt first puff. Never overfill, because excess e-liquid can flood the airflow path and leak out of the base.

Remember also that UK rules limit a refillable pod to 2ml, which is why the Arco E1 pod holds exactly that. The limit is a regulation, not a flaw in the product, and it applies equally to every competing pod kit sold here.

Choosing a nicotine strength

The SMOK Arco E1 itself contains no nicotine. Strength is determined entirely by the e-liquid you choose, and in the UK that is capped by law at 20mg per ml (2%) for any nicotine e-liquid or prefilled pod. Bottles are also limited to 10ml for nicotine-containing liquids. This cap is the same whether the liquid is sold for refillable kits, prefilled pods or other vapes in the range.

The most useful distinction for this kit is between nicotine salts and freebase nicotine:

• Nicotine salts: usually sold at 10mg and 20mg. They are smoother at higher strengths, absorb quickly, and are the natural pairing for a compact 2ml MTL pod. Most people using the Arco E1 will be choosing between these two strengths.
• Freebase nicotine: commonly sold at lower strengths such as 3mg, 6mg and 12mg. It is harsher at higher levels and generally better suited to larger, higher-wattage devices.
• Nicotine-free (0mg): an option for flavour-only vaping or for people who have stopped using nicotine and want to keep the habit of the device.

As a starting point, many adults moving away from regular smoking begin with 20mg nicotine salt, because it is the strength that most closely matches the intensity they are used to. People who smoke lightly, who already vape, or who find 20mg too sharp in the throat usually settle on 10mg. There is no universal correct answer, and the right strength is the lowest one that stops you needing to chain vape to feel satisfied.

Resistance interacts with strength in a useful way. A 0.6 ohm pod delivers more vapour per puff, so each draw carries more nicotine. Someone using a 0.6 ohm pod will often be comfortable on 10mg, whereas the tighter, lower-output 0.8 ohm pod pairs naturally with 20mg. If a combination feels harsh, drop the strength or open the airflow before changing anything else.

Some practical cautions apply. If you find yourself dizzy, nauseous or with a racing heart, stop and choose a lower strength. Do not use nicotine if you are pregnant, breastfeeding or have been told by a doctor to avoid it without taking professional advice first. Keep all e-liquid in its original child-resistant bottle, away from children and pets, because nicotine can be harmful if swallowed or absorbed through the skin. If you are an adult smoker looking for support, your pharmacist or local stop smoking service can talk through the options.

Who the SMOK Arco E1 suits, and who should look elsewhere

The Arco E1 is a very specific kind of product, and it is easier to judge once you know the sort of user it was designed around.

It is a sensible choice for:

• Adult smokers moving to vaping. The tight, draw-activated MTL experience is the closest match to the way a cigarette is used, and nicotine salts at 10mg or 20mg suit that style.
• First-time refillable users. Smart Mode removes wattage guesswork, the pod is simple to fill and the entry price is low enough that mistakes are cheap.
• Budget-conscious vapers. At £7.95 for the kit, and with pods and e-liquid to buy separately, the running cost is lower than buying prefilled devices repeatedly.
• People who want a back-up device. It is small enough to keep in a bag or glove box as a second device.
• Flavour explorers. A refillable pod lets you try a wide range of e-liquids, which prefilled devices cannot offer.

You may want to look elsewhere if:

• You want large clouds. A 30W ceiling and a small mesh pod are not built for that. A sub-ohm kit is a better fit.
• You want manual control. There is no user-set wattage here. If you like to fine-tune power, look at a more adjustable device. The SMOK Arco Digi Pod Kit, listed at £11.95, is the step up within the same family, and its product page sets out the extra features.
• You want zero maintenance. Refilling a pod, replacing pods and recharging all take a little effort. If you want to open a box and vape with no filling at all, a prefilled pod system is simpler, though it usually costs more over time.
• You do not smoke or vape already. Nicotine vapes are for adult smokers and existing vapers only.
• You are under 18. It is illegal to sell nicotine vaping products to anyone under 18 in the UK, and we do not do so.

If you are new to the category and want everything in one order, the Arco E1 Pod Kit Bundle is the more convenient route. According to its listing it adds a pack of refillable pods and three 10ml nicotine salt e-liquids to the kit, at a price that works out cheaper than buying the pieces separately. If you already have e-liquid at home, the kit on its own is all you need.

Setting up and using the kit

Getting started takes only a few minutes. Follow these steps in order the first time, and the whole process will become second nature.

• Step 1, check and charge. Remove all packaging and plastic film from the device and the pod. Plug in a USB-C cable and charge the battery fully before first use. Allow around an hour.
• Step 2, fill the pod. Remove the pod from the body. Open the fill port, then fill slowly with e-liquid, keeping the bottle tip clear of the central airflow tube. Stop just below the maximum line, because the pod holds a maximum of 2ml. Close the port firmly.
• Step 3, let it soak. Wait three to five minutes so the cotton is completely saturated. Skipping this is the most common reason for a burnt first puff.
• Step 4, seat the pod. Press the pod firmly into the body so it sits flush. A loose pod will not fire correctly.
• Step 5, set the airflow. Start with the airflow in a middle position, and adjust until the draw feels comfortable. Tighter is more cigarette-like, and more open is cooler and airier.
• Step 6, take gentle first draws. Take three or four slow, short puffs without inhaling deeply to finish priming the coil. Then vape normally. Because the device is inhale activated, you simply draw on the mouthpiece and vapour follows.

A few tips make the experience better. Pace yourself with the first pod, because a fresh coil benefits from a brief settling period. Take puffs of two to four seconds rather than long, hard pulls. Pause between puffs when you are vaping continuously to let the cotton re-wet. Keep the device upright when you are not using it, and store it with the pod mostly empty if you will not touch it for several days.

To change e-liquid, remove the pod, empty any remaining liquid, rinse the pod body briefly if you want to reduce ghosting, let it dry completely, and refill. Do not rinse the device body or the electrical contacts. Smart Mode handles the output automatically once the new pod is fitted, so there is nothing to reset.

When it is time to replace the pod, simply remove the old one, fit the new one and prime it as described above. Keep spare pods in a drawer, not in a hot bag or car, and keep them in their packaging until needed so the cotton stays clean.

Troubleshooting, care and recycling

Most problems with pod kits have simple causes. Work through these before assuming something is faulty.

• The device will not fire. Check the battery has charge, then remove the pod and press it back in firmly. Wipe the contacts between the pod and the body with a dry cotton bud. Make sure the airflow is not fully blocked, and that the pod is filled and primed.
• Gurgling or spitting. The pod may be overfilled, or condensation has built up. Take the pod out, tilt it gently, and clear the mouthpiece with a tissue. Fill a little lower next time.
• Leaking. Common causes are overfilling, a pod not fully seated, or a hot environment that expands the liquid. Wipe the device dry, reseat the pod and keep it upright. If a pod keeps leaking, replace it.
• Burnt or acrid taste. This is usually a dry coil from vaping with low e-liquid or from skipping the priming wait. Refill, wait, and take gentle puffs. If the taste persists, the coil is spent and the pod needs replacing.
• Weak flavour or thin vapour. Check the liquid level, try a more open or more closed airflow, and consider whether the e-liquid is too thick. A worn pod is the likeliest explanation if none of that helps.
• The device will not charge. Try a different cable and adapter, and check the USB-C port for lint with a wooden toothpick, being careful not to damage the contacts.
• Fires on its own or warns of a short. Unplug anything attached, remove the pod, and check for moisture around the contacts. Dry thoroughly before reuse. If the fault continues, stop using the device and contact the retailer.

For ongoing care, keep the device away from water and heat, wipe the mouthpiece with a clean dry cloth, and avoid carrying it with a full pod in a pocket that gets squeezed, as pressure can push liquid out.

Recycling matters, and the rules are clear. Do not put vapes, pods or batteries in household refuse or kerbside recycling. Take the device to a household waste recycling centre, or to a retailer drop-off point for small electrical items and batteries. Empty the pod of e-liquid before disposal, and keep leftover e-liquid and empty bottles out of reach of children and pets.

Value for money and how the Arco E1 compares

The strongest case for the SMOK Arco E1 is price. At £7.95 the kit costs less than many single prefilled vapes, yet it is a reusable device with a 1300mAh rechargeable battery that you can keep using for months. The ongoing costs are pods and e-liquid. The replacement pods are listed on this site at £6.95, and you should check the listing for the exact pack contents. E-liquid in 10ml bottles is typically a few pounds each, which means a refillable kit generally works out cheaper per millilitre than a prefilled alternative once you have bought the hardware.

Within the SMOK range, the choices break down like this:

• SMOK Arco E1 Pod Kit, £7.95: the kit alone, for people who already have e-liquid or want to choose their own.
• SMOK Arco E1 Pod Kit Bundle, £18.95: per its listing, the kit with a pack of refillable pods and three 10ml nicotine salt e-liquids, at over 20% off buying them separately.
• SMOK Arco Digi Pod Kit, £11.95: the step-up model in the same family for people who want more than the E1 offers.

Fair comparisons with other makers need some care, because specifications change between generations. In the same price and 2ml MTL pod bracket you will find kits from brands such as Vaporesso, Uwell and OXVA. Several of these are quoted around 1000mAh or a little less, so the Arco E1's 1300mAh battery is a reasonable advantage on paper, though you should check current listings because figures change. Rivals may offer more pod resistance choices, different pod designs, or a wider range of accessories and colours, and some have larger ecosystems of replacement pods. The Arco E1's strengths are its low price, its simple operation and its battery size. Its limitations are the absence of manual power control and the fact that, like every MTL pod kit, it is not built for big clouds.

Against prefilled devices, the picture is mixed. A prefilled vape needs no filling and no pod replacement, which is genuinely easier. The cost is a higher price per millilitre, a fixed flavour, and a device that is thrown away or recycled sooner. If you vape daily and care about running costs or flavour variety, the refillable route usually pays for itself quickly. If you vape only occasionally and want no effort at all, prefilled may suit you better.

Delivery adds to the value. Orders over £20 qualify for free UK delivery, and orders placed before 4pm are dispatched the same working day. A kit, a pack of pods and a bottle of e-liquid will usually take a basket past that threshold, and every product is genuine stock supplied to adults aged 18 or over.