Freemax REXA SQ Pod Kit Silver

Overview

The Freemax REXA SQ Pod Kit Silver by Freemax in Silver at 0mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Freemax REXA SQ Pod Kit Black: Overview and Specifications

The Freemax REXA SQ Pod Kit in Black is a compact, refillable pod system from Freemax, the Shenzhen-based hardware maker that UK vapers know mainly for its mesh-coil tanks and pocket pod kits. It sits in the part of the market where you pour in your own e-liquid, replace a coil-equipped pod when the flavour fades, and charge a small built-in battery over USB-C, rather than throwing away an entire device after a few days.

If you are leaving disposables behind, a kit like this is the logical next step. A disposable gives you a fixed flavour, a fixed nicotine strength and a battery that is binned with the rest of the unit. A refillable pod kit gives you control over all three. You choose the juice, you choose how strong it is, and you only replace the consumable parts. For anyone who vapes daily, that usually works out cheaper over a month, and it produces noticeably less waste.

The REXA line is Freemax's slim, everyday pod range. The SQ model in black follows the same philosophy: a pen-sized body that slips into a jeans pocket, a simple draw-activated or one-button experience, and a mesh coil designed to give a smooth, even vape without a long learning curve. It is not built for tinkering. There are no wattage menus to learn and no tanks to rebuild. You fill the pod, wait a few minutes, and vape.

In this guide we cover everything a UK buyer is likely to ask before purchasing: the specifications, how it performs in real use, what flavour to expect from the mesh coil, how the build quality holds up, how long the battery lasts, which nicotine strength to choose, who the kit suits and who should look elsewhere, how to fill and use it, how to fix common faults, and how it compares on value with similar kits from other brands.

A quick note on legality before we begin. You must be 18 or over to buy or use any vape product in the UK. Nicotine e-liquid sold in the UK is capped at 20mg/ml (2%), and refillable tanks and pods are capped at 2ml capacity. Everything described below assumes you will fill the pod with a UK-legal 10ml bottle of e-liquid at or below 20mg.

Exact figures can change between production batches and revisions, so always cross-check the printed specification on the pack when your kit arrives. The details below describe what a Freemax REXA-series pod kit of this type is built around, and they are the numbers that matter when you are comparing it with other kits.

• Type: refillable pod kit with a built-in rechargeable battery
• Pod capacity: 2ml, which is the maximum allowed for refillable tanks and pods sold in the UK
• Coil: mesh coil built into the replaceable pod, in a resistance suited to mouth-to-lung (MTL) or restricted direct-to-lung vaping
• Battery: built-in lithium-polymer cell in the roughly 800 to 1000mAh class, which is the normal range for pen-style pod kits
• Charging: USB-C port on the base of the device
• Activation: draw-activated, with button support depending on revision
• Fill method: side or top fill port on the pod, sealed with a silicone plug
• Colour: Black, a matte or soft-touch style finish that is less prone to showing fingerprints than polished colours
• Recommended nicotine: 10mg to 20mg nic salt for MTL use, or 3mg to 6mg freebase for lower-strength restricted DTL

In the box you should expect the device itself with a pod pre-installed or packed alongside, a USB-C charging cable, and a printed user manual and warranty card. Some kits are shipped with a spare pod, others with a single pod only. Check the item listing and your delivery contents so you know whether to order spare pods straight away.

Importantly, the kit is shipped empty. It does not come with e-liquid, so you will need to buy a bottle separately. A 10ml bottle will fill a 2ml pod five times, which gives you a rough idea of how long a bottle will last you.

Because the pod is the part that holds the coil, the pod is the part that wears out. Freemax-style pods are sold as replacements, usually in packs of two or three, and they can be swapped in seconds without tools. The battery and body are meant to last through many pod changes, which is why the kit format works out cheaper than disposables once you have used it for a few weeks.

For anyone who likes to know exactly what they are buying, it is worth keeping the packaging until you have checked the pod resistance printed on the coil label. Resistance is the number that tells you how the pod will feel when you draw on it, and we explain it fully in the coil section below.

Performance and Puff Delivery

Pod kits in this class are tuned for steady, consistent output rather than raw power. The REXA SQ is built to deliver a smooth, medium-warm vape from the first draw to the last drop of liquid in the pod. That consistency is the main reason mesh coils became the standard in pod systems: they heat across a larger surface area than an old-style wire coil, so there are fewer hot spots and the flavour stays steadier through the life of the pod.

Puff count is the question most buyers ask first, and honest answers need caveats. A 2ml pod is a small reservoir. As a rough guide, many users find that a full 2ml pod lasts somewhere between half a day and a full day of moderate use, and figures of roughly 400 to 600 puffs per fill are commonly quoted for pods of this size. Your own number will be higher if you take short, light draws on a higher-resistance coil, and lower if you take long draws or use a low-resistance coil that vaporises more liquid per second.

Draw feel depends on which pod resistance you choose. A higher-resistance mesh pod, typically in the 0.8 to 1.0 ohm area, gives a tighter, cigarette-like mouth-to-lung draw with a noticeable throat hit at higher nicotine strengths. A lower-resistance pod, in the 0.6 ohm area, opens the draw slightly and produces more vapour and a warmer inhale. If you are a former smoker, the tighter option is usually the more satisfying one. If you are coming from a larger vape and miss the cloud, the looser pod is worth trying.

Throat hit and vapour production are also influenced by the e-liquid. Nicotine salts are smoother at 10mg to 20mg and are designed for low-power devices like this. Freebase nicotine at 3mg to 6mg works too, but it is a different sensation, with a thinner, less warm hit at the same strength. For most people who are switching from smoking, nic salts are the easier route in a device of this type.

Draw activation means the device only fires when you inhale, which keeps the experience simple and helps preserve battery. In practice, the response should be near-instant once the coil is primed. If you notice a delay on the first few puffs of a fresh pod, that is normal, because the cotton around the mesh needs time to absorb liquid fully before the coil can fire cleanly.

Overall, expect an easy, low-fuss performer. It will not match a larger box mod for cloud size, and it is not meant to. What it does offer is dependable day-to-day vaping in a package small enough to carry anywhere.

Flavour Profile

The kit itself has no flavour, since the flavour comes from the e-liquid you pour in. What the device contributes is how faithfully that flavour reaches your palate, and this is where mesh coils earn their reputation. Because the heating surface is wide and the temperature is even, you tend to get cleaner top notes and less of the burnt, flat taste that can creep into older coil designs as they age.

In a pod of this kind, you can usually expect a medium-warm vapour temperature. That temperature suits fruit, candy and dessert profiles well. Berries and sweet fruits stay bright without turning sticky, and menthol or ice blends keep their cooling edge without feeling harsh. Heavier custard and bakery flavours also work, though thicker, high-VG liquids can slow the wicking, so it is best to stick to e-liquids sold as suitable for pod systems.

For the best flavour, choose an e-liquid with a balanced ratio, usually 50VG/50PG or a nic salt mix designed for pods. Very thick liquids, such as 70VG or 80VG blends designed for sub-ohm tanks, can starve the coil and cause a dry, hot taste. A thinner liquid soaks into the cotton faster and keeps the flavour clean from the first puff.

It is also worth knowing that mesh coils are sensitive to sweeteners. Heavily sweetened liquids caramelise on the coil faster, which shortens pod life and can turn the taste dark or bitter after a few days. If you like sweet profiles, you will get a longer-lasting pod with lighter-sweetness juices, or by rotating between sweet and non-sweet flavours.

When you swap flavours, change the pod if you want a completely clean taste. Cotton holds on to flavour, and a pod that has been used with a strong menthol will leave a trace in your next fruit flavour. If you do not want to replace the pod, you can empty the remaining liquid, rinse the pod with lukewarm water, dry it completely, and refill, but a fresh coil gives the cleanest result. Many vapers keep two pods on rotation, one for fruit and one for menthol or tobacco, so they never have to compromise.

Stick with this approach and the REXA SQ will reproduce your chosen flavour accurately for the full life of the coil, which for most users is somewhere between one and two weeks of regular use.

Design and Build Quality

Freemax designs the REXA range to be slim, light and pocketable, and the black finish keeps the SQ looking understated. Black is a practical colour choice for a device that lives in pockets and bags. It hides minor scuffs and does not show vape residue as readily as a white or pastel body.

The body is typically built from a zinc alloy or similar metal-based shell, with a plastic pod that clicks into the top. This is the standard approach for pod kits at this price, and it gives a solid in-hand weight without making the device feel heavy. Zinc alloy is durable enough for everyday carry, but it is not immune to dents if dropped on a hard floor, so a lanyard or a small pouch is a sensible low-cost extra.

The pod connection is the part to inspect when the kit arrives. Pods in this family generally sit on magnetic or friction-fit contacts and should seat firmly with a distinct click. A loose pod is a common cause of misfiring, so make sure it is pushed fully home. The mouthpiece on the pod is usually a rounded, slightly flat design that is comfortable on the lips and fits easily between teeth for MTL vaping.

The fill port is usually protected by a silicone bung. This bung is easy to lose and it matters, because an uncovered port is the main route for leaks. Fill slowly, press the bung fully back in, and wipe away any liquid from the exterior before clicking the pod into the device.

On the base you will find a USB-C port. USB-C is a quality-of-life feature worth noting: the cable can go in either way up, charging speeds are faster than older micro-USB, and the same cable you use for your phone will work. Many kits also have a small LED indicator that signals battery level and firing, though the specific light behaviour varies between models and revisions.

Everything considered, the build is what you should expect from a modern budget-to-mid-range pod kit: practical, tidy, and made to be used every day. It is not a premium machined device and it does not claim to be, but it is made to a standard where, with sensible handling, it should keep working through many pod changes.

Battery and Charging

Slim pod kits rely on a small built-in battery, typically in the 800 to 1000mAh range. That is not a large capacity in raw numbers, but it is matched to the low power draw of a mesh pod system. Because the device runs at modest wattage and only fires while you inhale, a battery of this size usually lasts a full day for light to moderate users.

As a rule of thumb, a typical user who vapes steadily through the day will want to charge the kit once every day, usually overnight. Light users may get two days from a single charge. Heavy users, especially chain vapers on a low-resistance pod, may find they need a top-up during the day. Because charging is by USB-C, a top-up from a power bank or a laptop port is simple.

Charge time for a battery of this size is usually in the region of an hour to an hour and a half from empty. You can speed up charging by using a decent phone wall adapter rather than a slow USB port on an old computer, but there is no need for a high-wattage fast charger, and plugging this device into a very large charger does not make it charge much faster, as the device itself controls the charging rate.

Here are a few practical habits that extend battery life:

• Avoid leaving the device charging for days at a time. Charge, unplug, and use.
• Do not charge in direct sun, in a hot car, or on a radiator. Heat is the main enemy of small lithium cells.
• Use a reputable charger and a good cable. A damaged or very cheap cable can cause slow or unstable charging.
• Store the device somewhere cool and dry, and avoid leaving it fully drained for long periods.
• Stop using the device if the casing becomes unusually hot, swells, or smells odd, and contact the retailer.

If the device flashes or refuses to fire, check the battery first. A very low battery can cause a flickering light and a weak response even when the coil is fine. Plug it in for ten minutes and try again before assuming the pod is faulty.

Battery cells do wear. After many months of daily charging, you may notice the device holds a little less charge than it did on day one. That is normal for lithium batteries of every kind. When you reach the point where the battery no longer lasts a day, the responsible thing to do is recycle the whole device, which we cover in the UK rules section below.

Mesh Coil Technology Explained

The coil is the heart of any pod kit, and mesh is the technology that defines this generation of devices. A traditional round-wire coil is a spiral of resistance wire wrapped around cotton. A mesh coil is a flat sheet of fine metal mesh, usually folded or curved, that sits against the cotton. Because the surface is a grid rather than a single wire, it heats a larger area at the same time.

That has three practical effects. First, flavour is more consistent, because the liquid is vaporised evenly rather than in a few hot spots. Second, warm-up is faster, so the device responds sooner when you draw. Third, coil life is typically better, because the heat is spread out and individual points are less likely to burn out quickly.

Coil resistance, measured in ohms, is the number to watch when you buy pods. Lower resistance means more current flows through the coil and it heats up more quickly, generally giving a warmer, larger vape. Higher resistance gives a cooler, tighter vape that uses liquid more slowly. In pod kits aimed at MTL vaping, you will commonly see resistances somewhere between about 0.6 and 1.2 ohms. Check the coil label on the pod you buy so you know which you have.

Pods have to be primed before first use. New cotton is dry, and firing a dry coil burns it instantly. After filling, let the pod sit for at least five minutes, and ideally ten, so the cotton is fully saturated. Take a few gentle draws without pressing any button before going to normal vaping. This step does more to protect coil life than any other habit.

Coil life varies with the liquid you use and how you vape. As a guide, a mesh pod in everyday use will typically last between one and three weeks. Signs that the coil is nearing the end include a burnt or muted taste, a loss of vapour, gurgling, or a harsh throat hit. When these appear and a refill does not fix them, swap in a new pod.

Because the coil is built into the pod, there is no rebuilding, no wicking and no dripping, which is a major reason pod kits suit beginners. You simply buy compatible pods and click them in. Always buy pods that are listed as compatible with your kit, because pods designed for other devices will not necessarily fit or fire correctly.

Nicotine Strength Guidance

Choosing the right nicotine strength makes the difference between a satisfying switch and a frustrating one. Because the REXA SQ is a low-power MTL-style pod kit, the standard advice for nicotine applies: match the strength to how much you smoked or vaped before, and use nic salts for the smoothest experience at higher strengths.

The UK sets a maximum of 20mg/ml for nicotine e-liquid. It is a common misconception that this cap applies only to disposables. It covers all e-liquid sold in the UK, including refill bottles for devices like this one. Disposable vapes sit under the same strength limit and a separate limit of 2ml for their liquid capacity. If you see a bottle advertised as higher than 20mg, it is not a UK-legal product.

• 20mg nic salt: for heavy smokers, those who smoked 15 or more cigarettes a day, or anyone who finds lower strengths leave them craving. It gives a firm throat hit, so it works best on a tighter, higher-resistance pod.
• 10mg to 12mg nic salt: a sensible starting point for moderate smokers, or those who smoked around 10 cigarettes a day. This is also where many experienced vapers settle after stepping down from 20mg.
• 5mg to 6mg nic salt: for light smokers and steady vapers who want a gentle hit and longer sessions.
• 3mg freebase or lower: suited to people who vape mostly out of habit, or who prefer a larger, warmer draw on a lower-resistance pod. Freebase nicotine is harsher than salts at equal strength, which is why the number is lower.
• 0mg: available for people who have finished with nicotine and want to continue the habit without it.

A low-power device delivers nicotine differently from a cigarette, and your first few days may involve some trial and error. If you find yourself vaping constantly and still feeling unsatisfied, the strength is probably too low. If you feel dizzy, queasy or get a very harsh throat hit, it is probably too high. Move up or down one step and try again rather than making big jumps.

If you are not currently smoking or vaping, you do not need nicotine and should not begin. Vaping is intended for adults who already smoke and want an alternative. Nicotine is addictive, and the health advice from UK public health bodies is that vaping is much less harmful than smoking for those who switch, but it is not risk-free and is not recommended for non-smokers, young people, or pregnant women unless advised by a clinician.

Who the REXA SQ Is For

No single device suits everyone, and a pod kit like this one fits some vapers far better than others. Here is a plain look at who is likely to be happy with it and who should look elsewhere.

Good fit:

• Smokers switching to vaping. The MTL draw, simple operation and nic salt support are all designed for people moving across from cigarettes. A tight mesh pod gives a similar draw to a cigarette.
• Disposable vapers who want to spend less. If you are going through two or three disposables a week, a refillable kit with a bottle of e-liquid will usually cost noticeably less over a month and gives you far more flavour choice.
• People who want something simple. There are no menus, no coil building and no wattage settings to learn. Fill, wait, vape.
• Anyone who values portability. The slim body is easy to carry and discreet.
• Vapers who want a backup device. A small pod kit is a handy second device to keep in a bag or glovebox.

Not the best fit:

• Cloud chasers. If you want large, dense vapour, a sub-ohm kit with a bigger battery and a larger airflow is a better match.
• Heavy all-day vapers. A 2ml pod and a battery under 1000mAh mean frequent refills and a daily charge, which can become tiresome for people who vape constantly.
• People who want to tinker. If you enjoy adjusting wattage, changing airflow, or rebuilding coils, an adjustable mod or rebuildable system will be more rewarding.
• Non-smokers and under-18s. These products are not for you, and it is illegal to sell them to anyone under 18.

A useful way to think about it: if your goal is to stop smoking, or to stop paying for disposables, and you want the least complicated route, this style of kit is a good place to start. If you already know you want more power, more airflow or more control, you will outgrow it quickly and should look at a larger kit.

How to Use the Kit: First Fill to Daily Routine

Setting up a refillable pod kit takes about five minutes, and getting the first fill right protects the coil. Follow these steps the first time, and every time you fit a new pod.

• Charge the device. Give it a short charge before first use if the battery is low. Charging is done over USB-C.
• Remove the pod. Pull the pod gently out of the top of the device. Take off the mouthpiece cover if there is one.
• Open the fill port. Lift or pull out the silicone bung covering the fill hole on the pod.
• Fill slowly. Tilt the pod slightly and run the e-liquid down the side of the fill port, so it does not form air bubbles. Stop before the liquid reaches the top. Do not overfill, and never fill through the central airflow tube.
• Close the port. Push the silicone bung fully back in. Wipe any spilled liquid from the pod.
• Prime the coil. Stand the pod upright and let it sit for five to ten minutes, so the cotton can soak up the liquid.
• Fit the pod. Click it into the device until it sits firmly.
• Take gentle first puffs. Take a few short, soft draws before vaping normally.

For everyday use, the routine is simple. Take slow, steady draws of two to three seconds. Pause for twenty to thirty seconds between puffs if you are vaping continuously, to let the cotton re-saturate. Avoid very long draws, because they pull liquid faster than the cotton can replace it, which leads to dry hits.

Refill when the liquid level is about a quarter of the way up the pod. Letting a pod run completely dry is the fastest way to burn out the coil. If you see bubbles rising, or the vapour gets thin, top up before you continue.

If the device has a lock function, it is usually activated by pressing the button several times in quick succession. This is worth using when the device is in a pocket or bag, to prevent accidental firing. Check your manual for the exact button sequence on your revision.

Keep the device clean. Wipe the pod connectors and mouthpiece with a dry cloth from time to time. If any liquid gets on the contacts, dry them with a tissue before reinserting the pod, as liquid residue can interfere with the electrical connection.

Troubleshooting Common Problems

Most problems with pod kits are simple and fixable at home. Here are the faults UK vapers report most often, and what usually solves them.

• Device does not fire. Check the battery by charging for ten minutes. Make sure the pod is fully seated and the contacts are clean and dry. If the device has a lock mode, make sure it has not been activated.
• Burnt or harsh taste. This usually means the coil is dry or worn. If you have just filled the pod, you may not have primed it long enough, so wait another few minutes. If the pod has been in use for a couple of weeks, it is probably time to replace it.
• Weak vapour or muted flavour. This is a sign of a tired coil, a nearly empty pod or a liquid that is too thick. Refill, or try a thinner e-liquid. If the issue persists, change the pod.
• Leaking. Check that the silicone bung is fully inserted, and that you have not overfilled. Leaks also happen when the pod is stored on its side, or when pressure changes, for example when travelling by air. Keep the device upright and carry a tissue.
• Gurgling noise. Often caused by condensation or by liquid sitting in the airflow channel. Remove the pod, blow gently through the mouthpiece, wipe it dry, and refit.
• Dry hits. Dry hits come from taking draws that are too long or too close together, or from running the pod too low. Slow your draws, wait between puffs, and refill earlier.
• Flashing light. The pattern depends on the model, but flashing usually means low battery, a short circuit, or a missing or faulty pod. Consult the manual for the exact meaning.
• Slow charging, or no charging. Try a different cable and a different power source. Check the USB-C port for dust or lint, which you can remove carefully with a wooden toothpick.
• Pod will not click in. Check there is no residue on the connector, and that the pod orientation is correct.

If none of these steps work, and you believe the device is faulty, stop using it and contact the retailer, quoting your order number. Do not attempt to open the device, as the battery inside is not designed to be user-serviced. A hot, swollen or damaged device should be taken out of use immediately.

Value for Money and How It Compares

Value is more than the price on the box. It is a combination of upfront cost, running cost, convenience and how long the device lasts. Pod kits like the REXA SQ sit in the entry-level to mid-range price band, and the cost per week is where they tend to beat disposables.

Consider the running costs. A disposable vape with a 20mg nicotine strength and a 2ml capacity is a fixed-price purchase that typically lasts a few days for a regular user. If you buy two or three a week, that spend adds up quickly. A refillable kit has a higher first cost, but once you own it, your ongoing spend is a bottle of e-liquid, which fills a 2ml pod five times, and a replacement pod every week or two. Most regular vapers find this noticeably cheaper after the first month, though the exact saving depends on how much you vape and which liquid you buy.

There is an environmental advantage too. Disposables contain a lithium battery and plastic that are thrown away after only a few days. A rechargeable kit reduces that waste significantly, and the UK now has a ban on the sale of single-use disposable vapes, which has pushed many people towards refillable systems.

How it compares with alternatives. It would not be fair to pretend there are no good rivals, so here is a balanced comparison with other well-known pod kits that UK vapers frequently consider.

• Vaporesso XROS series: a popular family of slim pod kits, typically in a similar 2ml, mesh-coil, USB-C format with a battery around the 1000mAh mark. The XROS range has a broad pod selection and often offers adjustable airflow, which gives it an edge for people who want some control over the draw. The REXA SQ is more basic, which suits those who prefer fewer choices.
• OXVA Xlim series: well regarded for build quality and a strong pod ecosystem, with a battery in a similar range. These can cost slightly more, and some versions offer wattage or mode options. Choose the Xlim if you want a little more flexibility, or the REXA SQ if simplicity and price matter more.
• Uwell Caliburn series: a long-established pod range with a reputation for consistent flavour and a smooth MTL draw. The Caliburn is a strong alternative if you already like that brand's pods.
• SMOK Novo series: another widely stocked family, often offered with a range of pods and colours. A reasonable comparison for buyers who like a familiar brand.
• Geekvape Wenax series: sturdy and often water and dust resistant on some models. A good choice if you need a tougher, more weather-ready device.

In summary, the Freemax REXA SQ is a straightforward, competitively priced option in a crowded category. Its strengths are simplicity, portability and the consistent flavour of a mesh coil. Its limits are those of the category: a small pod, a modest battery, and little room for adjustment. If those trade-offs suit you, it represents sound value. If you want adjustable airflow, wattage control or a larger battery, you will find more capable kits for a little more money.

UK Rules, Safety and Recycling

Buying and using a vape in the UK comes with a few rules that are worth knowing, both to keep you on the right side of the law and to keep you safe.

Age. You must be 18 or older to buy, or to be sold, any nicotine vape product. Retailers are required to refuse sales to under-18s, and reputable online shops will ask you to confirm your age. It is also an offence for an adult to buy vapes on behalf of a person under 18.

Nicotine strength. The maximum strength for nicotine e-liquid sold in the UK is 20mg/ml, which is 2%. This applies to disposables and to refill bottles alike. Refillable tanks and pods are limited to 2ml, and bottles of nicotine e-liquid to 10ml. The REXA SQ pod follows this size limit, and so you should buy your e-liquid in 10ml bottles or smaller.

Battery safety. Lithium batteries are safe when they are treated sensibly. Use the supplied or a reputable USB-C cable, do not leave the device charging unattended for long periods, and do not charge it on a bed, sofa or other soft surface. Do not carry it loose in a pocket with keys or coins. If the device is damaged, swollen, or unusually hot, stop using it and do not charge it.

Storage. Keep the device, the pods and the e-liquid out of the reach of children and pets. Nicotine is toxic if swallowed, and e-liquid bottles should have child-resistant caps. Store the e-liquid in a cool, dark place, away from direct sunlight.

Recycling. Vapes contain a lithium battery and electronic components, and they must never go in household bins or standard recycling. Under UK waste electrical rules, retailers that sell vapes are required to take back old vapes for recycling. You can drop off a used device, whether or not you bought it from that shop, at most vape shops and at many supermarkets and household waste recycling centres that offer small electricals collection. Check your local council website or a recycling locator for your nearest drop-off point. Used pods, once drained, should go in with small electricals as well, as they contain a coil and electronic contacts.

Being a responsible vaper takes very little extra effort, and a rechargeable pod kit makes it easier, because you throw away far less than you would with a pile of disposables.