Heisenberg No Ice Vlad's VG 10ml 3mg

Overview

The Heisenberg No Ice Vlad's VG 10ml 3mg by Vlad's in Heisenberg No Ice at 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Product overview

Vlad's VG Heisenberg No Ice is a 10ml bottle of nicotine e-liquid at 3mg/ml, made for refillable vape kits rather than as a ready-to-use disposable. The 'No Ice' part of the name tells you this is the plain fruit version of the flavour, with no menthol or cooling agent layered on top. The result is a warmer, sweeter vape that keeps the fruit in front instead of chilling it. The VG in the range name points to a vegetable-glycerine-led blend, the style of formulation built for dense vapour and a smooth inhale on sub-ohm and mid-power setups.

Here are the headline specifications at a glance:

• Bottle size: 10ml, the largest size allowed for nicotine-containing e-liquid in the UK
• Nicotine strength: 3mg/ml, which works out to 30mg of nicotine across the whole bottle
• Base: VG-dominant blend (always confirm the exact VG and PG split printed on the label of the bottle you receive)
• Nicotine style: a low-strength, freebase-style liquid suited to a smooth, warm inhale
• Flavour: Heisenberg, a blue-fruit style profile, in its No Ice version
• Intended hardware: refillable tanks and pod kits fitted with coils that handle a thicker liquid

Heisenberg is a blue-fruit flavour. The name nods to the colour rather than to a single fruit, and most vapers read the profile as a sweet blue raspberry candy with a rounded berry body. Brands interpret flavour names differently, so treat that description as a guide and check the label and product listing for the exact notes before you buy.

Because this is a nicotine product, it is for adults aged 18 or over only. UK rules cap e-liquid strength at 20mg/ml, limit nicotine bottles to 10ml and require child-resistant, tamper-evident packaging, so every bottle sold legitimately in Britain follows the same basic format. At 3mg/ml this liquid sits at the lower end of the strength range, which makes it a sensible choice for vapers who run powerful hardware or who have already stepped down from higher strengths. The sections below cover how it performs, how it tastes, which hardware suits it and where it sits against the alternatives, so you can decide whether it fits your setup before it lands on your doormat.

Performance and vapour delivery

High-VG e-liquid behaves differently from the thinner, PG-heavy liquids many vapers start on, and Vlad's VG Heisenberg No Ice follows that pattern. Vegetable glycerine is thicker and produces more visible vapour, with a softer, rounder feel in the throat. Propylene glycol carries flavour well and gives a sharper throat sensation. A VG-led blend therefore leans towards vapour volume and smoothness, and at 3mg/ml the throat hit stays gentle even when you push the wattage up.

How the liquid performs depends heavily on the device it goes into. As a rough guide:

• Sub-ohm tanks at 30 to 60W: dense vapour, full flavour and a warm draw. This is the setup a VG-dominant liquid is designed around, and it is where the 3mg strength makes the most sense.
• Mid-power pod kits at 15 to 30W: a balanced middle ground with decent vapour, good flavour definition and lower liquid consumption than a sub-ohm tank.
• Low-power mouth-to-lung pod kits at 8 to 15W: workable if the kit is built for thicker liquids, but check the manufacturer's guidance first, because some small pod coils wick a high-VG liquid slowly.

A 10ml bottle holds 10ml of liquid and 30mg of nicotine in total. Real-world puff counts are an estimate rather than a fixed figure, because they depend on puff length, wattage and coil. As a working estimate, expect roughly 1,000 to 1,600 puffs per bottle on a low-power pod kit at 10 to 15W with short draws, and roughly 300 to 600 puffs on a sub-ohm tank at 40 to 50W with longer, deeper draws. Heavier users on powerful kits will get through a bottle in a couple of days. Lighter users on pod kits may stretch one to a fortnight or more.

The UK limit on tank capacity is 2ml, so a 10ml bottle will refill a standard tank about five times. Nicotine intake per puff is modest at this strength. At 3mg/ml and a typical sub-ohm puff using perhaps 0.02 to 0.04ml of liquid, you are looking at roughly 0.06 to 0.12mg of nicotine per puff before absorption losses. That is why 3mg is usually paired with large, airy draws rather than tight, restricted ones.

Consistency matters as much as peak performance. A VG-heavy liquid wicks more slowly than a thin one, so a coil that is fully saturated at the start of a session can run a little dry if you chain puffs quickly at high wattage. Leave a few seconds between draws and keep the tank at least a third full. Do that and the liquid should give even flavour and steady vapour from the first fill to the last, without the sudden thinning-out that tends to signal a coil running short on liquid.

Flavour profile

Heisenberg No Ice is a sweet blue-fruit flavour built around a candy-style raspberry character with a rounded berry body underneath. Think of the flavour as arriving in three stages, which is a useful way to judge any fruit liquid.

• On the inhale: a bright, sugary blue-fruit note that arrives quickly. Because there is no menthol, the first impression is sweet rather than cold, and the fruit has room to show its tangy edge.
• On the exhale: a softer, jammier berry body takes over, with the candy sweetness lingering at the back of the mouth. High-VG blends tend to add a thick, smooth texture here that makes the flavour feel fuller.
• The aftertaste: a clean, lightly sweet finish. There is no heavy cream, no tobacco and no bitterness, so the flavour fades without a coated feeling if you drink water between sessions.

The 'No Ice' tag matters. Many blue-fruit liquids are sold with a cooling layer, and some vapers find that the cooling flattens the fruit or numbs the palate after a few tanks. Without it, the sweetness and the berry tang stay in the foreground. The trade-off is that on a warm sub-ohm setup the sweetness can feel richer and heavier than the chilled version, so if you like a crisp finish you may prefer to look for an iced variant in the same range.

Wattage changes the flavour noticeably:

• Lower wattage: the candy sweetness leads and the vapour is cooler and gentler. Flavour definition is usually clearest here.
• Mid-range wattage: the berry body fills out and the flavour tastes rounder and more complete. Most vapers settle in this window.
• High wattage: vapour is hotter, the sweetness intensifies and some of the finer fruit detail can blur. Very high settings can also push a sweet liquid towards a caramelised, slightly burnt edge.

Sweet blue-fruit liquids contain flavourings that can leave a film on the coil, an effect usually called gunking. It shows up as a muted or slightly sour taste after a week or so on one coil. It is a property of sweet liquids in general rather than a fault with this one, and changing the coil on time fixes it. Steeping, meaning leaving the bottle somewhere cool and dark for a day or two with the cap closed, can soften the edges of a freshly made liquid, though most vapers find it ready to use straight away. If you are new to the flavour, vape a tank at mid-range power before you judge it, and give your palate a few minutes to adjust, because the first few puffs of any sweet liquid can taste sharper than the rest.

Bottle design and build quality

With an e-liquid, the build quality you are judging is the packaging rather than a device, and it matters more than people expect. A bottle that leaks, glugs or cracks open turns a routine refill into a mess and wastes liquid you have paid for. UK rules require nicotine e-liquid bottles to be child-resistant and tamper-evident, and well-made 10ml bottles meet that with a simple set of features.

• Soft plastic body: 10ml nicotine bottles are normally made from squeezable plastic, which lets you control the flow and push liquid out in small amounts.
• Fine-tip nozzle: a long, narrow tip is designed to fit the fill ports on most tanks and pod cartridges without drips.
• Child-resistant cap: the cap usually needs to be pressed down while turning, which small children generally cannot manage. It is also the reason the first opening can feel stiff.
• Tamper-evident ring: a break-away band that snaps when the cap is first opened, so you can tell the bottle was sealed when it left the factory.
• Printed label: the label carries the required health warning, the nicotine strength, the ingredient list and a batch code. Keep the batch code if you ever need to contact the supplier about a bottle.

Check the bottle when it arrives. The tamper ring should be intact, the cap should sit square, and the label should match what you ordered, including the 3mg strength and the No Ice name. If a bottle is damp, cracked or already open, do not use it and contact the shop straight away with the batch number.

A few handling habits keep a 10ml bottle in good condition. Store it upright, away from direct sunlight and heat, because warmth and light degrade flavour and nicotine over time. Wipe the nozzle after filling so residue does not build up around the cap. Always keep nicotine liquid out of reach of children and pets, and never decant it into drinks bottles or unmarked containers. If liquid gets on your skin, wash it off with soap and water.

Plastic bottles are recyclable in many areas, but the rules vary by council. Rinse the empty bottle, check your local guidance, and treat the cap and nozzle according to the same rules. Tank cartridges, pods and batteries are different and need to go through electrical recycling rather than your household bin, which the battery and charging section covers in more detail.

Battery and charging: what your device needs

E-liquid has no battery of its own, so the battery and charging question here is really about the hardware you pair it with. A VG-led liquid at 3mg/ml works best with a device that can deliver steady power, and that comes down to battery capacity and the quality of the charging setup.

• Low-power pod kits (about 400 to 1,000mAh): suited to 8 to 15W use. Expect a full day for a light user and charging every evening for a heavier one. Charge through USB-C where available.
• Mid-size pen and pod mod kits (about 1,000 to 2,000mAh): a good fit for 15 to 40W use, giving a full day for most people.
• Sub-ohm kits with a built-in battery (about 2,000 to 3,000mAh): suited to 30 to 60W vaping. These deliver strong performance but need charging daily, and some need charging twice for heavy use.
• Removable-cell mods (usually 18650 or 21700 cells): offer the most flexibility, since you can carry a spare charged cell. They require you to understand the cell's current rating and use a proper external charger.

Battery life depends on wattage. A 2,000mAh battery at 40W lasts far less time than the same battery at 15W, and a larger tank of high-VG liquid will often outlast a small battery. If you run through a battery before you run through a tank, drop the wattage a little or move to a kit with more capacity.

Safe charging habits matter with any lithium cell:

• Use the cable and plug that came with the kit, or a reputable replacement rated for the same output.
• Do not charge overnight or leave a charging device unattended.
• Do not charge on soft furnishings such as beds or sofas, where heat cannot escape.
• Stop using any device with a swollen, hot or damaged battery, or with a damaged wrap on an external cell.
• Keep loose cells in a case, not loose in a pocket with keys or coins.

When a battery or device reaches the end of its life, do not put it in household rubbish or the general recycling bin, because lithium cells can start fires in collection vehicles and sorting plants. Take it to a vape-recycling drop-off point instead. In the UK, many vape shops and large retailers that sell vapes accept old devices and batteries, and household waste recycling centres run by councils take small electricals. A recycling-locator service for electrical items, run by the electrical industry, can also point you to your nearest drop-off point. The same applies to pods and tank parts that contain metal or electronics.

Coil and wicking compatibility

Coil choice is where a high-VG liquid either works well or causes trouble. A thicker liquid needs a coil with enough wicking surface and large enough wick openings to draw liquid in quickly. Match the coil to the liquid and the experience is smooth. Mismatch them and you are likely to get dry hits or a burnt taste.

• Mesh coils (about 0.12 to 0.2 ohm): wide, flat heating surfaces with large wicking area. They handle VG-heavy liquids well, heat up quickly and tend to give even, rounded flavour at 40 to 80W. They are a common choice for sub-ohm tanks and are well matched to this liquid.
• Sub-ohm round-wire coils (about 0.2 to 0.6 ohm): a long-established option for 30 to 60W. They suit thicker liquids provided the wicking holes are large.
• Higher-resistance coils (about 0.6 to 1.0 ohm): intended for 12 to 25W and used in many pod and starter kits. Look for coils marked as suitable for high-VG liquid.
• Mouth-to-lung coils (about 0.8 to 1.2 ohm): designed for lower power and a tighter draw. A very thick liquid may wick slowly in these, so only use them if the maker lists them as high-VG compatible.
• Ceramic coils: often found in pod systems. They tend to wick evenly and have a clean taste, but check the maker's guidance on VG ratio.

Always stay inside the wattage range printed on the coil. Running a coil below its minimum starves flavour, and running it above its maximum risks dry hits and shortens its life.

Priming is the step that decides whether a new coil lasts. Drip a few drops of liquid directly onto the cotton through the coil's wicking holes, fit the coil into the tank, fill the tank, and then wait five to ten minutes for the cotton to soak through before you fire the device. Cotton that is not fully saturated burns on first use, and a burnt coil rarely recovers. When you fire the device for the first time, start at the lower end of the wattage range and work upwards.

Coil life with a sweet blue-fruit liquid is generally one to two weeks of regular use, or around one to three bottles, though it varies with wattage and how much you vape. Flavour dulling, a slightly sour or burnt note, or a gurgling sound that does not clear are all signs that it is time to change the coil. Replacing the coil before it fails is cheaper than the wasted liquid and unpleasant puffs that come from running one into the ground.

Nicotine strength guidance

Nicotine strength is the decision that has the biggest effect on whether a liquid suits you, and 3mg/ml sits near the bottom of the range. For context, the UK caps e-liquid at 20mg/ml, and the same 20mg limit applies to the pre-filled liquid inside disposable vapes, which are also limited to a 2ml capacity. Most refillable e-liquids are sold in a range of strengths, commonly 0mg, 3mg, 6mg, 12mg and 18mg, so 3mg is a step above nicotine-free.

A general guide to where 3mg sits:

• 0mg: nicotine-free, used by people who vape for flavour only or have completed a step-down.
• 3mg: low strength. Suitable for sub-ohm vaping, for people stepping down, and for those who vape frequently through the day on big draws.
• 6mg: medium-low. Often chosen by vapers who found 3mg left them wanting more on a sub-ohm kit, or who use mid-power kits.
• 12mg: medium. A common choice for mouth-to-lung pod kits among people who previously smoked a moderate amount.
• 18mg: high strength, usually vaped on very low-power, tight-draw devices.

The relationship between strength and power is the key point. The more liquid you pull per puff, the less nicotine concentration you need. Sub-ohm tanks at 40 to 60W produce large volumes of vapour per draw, so 3mg usually delivers a satisfying amount of nicotine. A tight mouth-to-lung pod at 10W delivers far less liquid per puff, and 3mg on that setup tends to feel weak. If you are moving from a pod kit to a sub-ohm tank, drop the strength rather than keeping the same number.

Signs the strength is wrong:

• Too low: you vape constantly, finish a tank quickly, feel restless soon after your last session, or find yourself reaching for the device without enjoying it.
• Too high: a harsh throat hit, light-headedness, nausea, or a racing heartbeat after a few puffs.

If you are a smoker switching to vaping, 3mg alone is unlikely to be enough on a low-power kit, and a higher strength or a nicotine salt liquid in a pod device may suit you better. The NHS and local stop-smoking services can advise on quitting, and this page is not medical advice. Do not use this liquid if you are under 18, pregnant, or have a heart condition without speaking to a health professional first. Because nicotine is addictive, 3mg is a good option mainly for people who already use nicotine, not for non-smokers.

Who this e-liquid is for

Vlad's VG Heisenberg No Ice suits a fairly specific group of vapers, and being clear about that saves wasted money.

It is a good fit for:

• Sub-ohm vapers: anyone running a sub-ohm tank or mesh coil at 30W or above who wants a smooth, warm, sweet fruit liquid at a low nicotine strength.
• Vapers stepping down: people who have been using 6mg or 12mg and want to reduce their nicotine in steps without changing flavour.
• Fans of sweet, candy-style flavours: if you like blue raspberry sweets or fruit-heavy liquids, this fits that taste.
• People who dislike menthol: the No Ice version keeps the profile warm and fruity, without any cooling layer.
• Refillable-kit users who want a single-bottle flavour: anyone who prefers to refill their own kit rather than replace a disposable every few days.

It is probably not the right choice for:

• Heavy smokers coming straight off cigarettes: 3mg is unlikely to satisfy cravings on a low-power kit. A higher strength or a nicotine salt may work better, and a stop-smoking adviser can help you choose.
• Users of very small, low-power pod kits: check that your pod or coil is rated for high-VG liquid, because a thick liquid can wick poorly in some of them.
• People who want a cooling finish: if you prefer a chilled exhale, look for an iced variant of the flavour instead.
• Anyone wanting a ready-to-use device: this is a liquid only. You need a refillable tank or pod kit, coils and a battery.
• Non-smokers and under-18s: nicotine is addictive, and the product is not for either group. UK law prohibits the sale of nicotine vapes to anyone under 18.

If you are new to refillable vaping, a simple starter kit with a pen-style battery and a mesh-coil tank pairs well with this liquid. If you already own a sub-ohm kit, you can start using it today with whatever coil you have fitted, provided that coil is rated for high-VG liquid and is not close to the end of its life.

How to use it

Using a 10ml bottle is straightforward, but doing it carefully saves leaks, wasted liquid and bad coils. Follow these steps for a first fill.

• Check your kit: make sure the battery is charged, the tank is clean and dry, and the coil is suitable for a high-VG liquid. If the coil is new, prime it as described in the coil section.
• Switch the device off or lock it: this prevents it firing in your hand while you work.
• Shake the bottle gently: a quick shake mixes the flavour and nicotine evenly, especially if the bottle has been lying on its side in transit.
• Open the child-resistant cap: press down while turning. The tamper ring will break the first time, which is normal.
• Locate the fill port: on most tanks you either slide the top cap open or unscrew the top section. Many modern tanks have a fill port at the side.
• Fill slowly: aim the nozzle at the side wall of the tank, not straight down the centre tube, and squeeze gently. Avoid covering the airflow holes and the central chimney, because liquid in there will flood the coil.
• Stop below the maximum: leave a small air gap at the top. UK tanks hold up to 2ml, so you will have liquid left in the bottle.
• Close everything up: reassemble the tank, wipe off any spilled liquid and replace the bottle cap firmly.
• Wait before the first puff: let the tank sit for a few minutes so the coil can wick up liquid. This protects a fresh coil.

For the first few puffs, start at the lower end of the coil's recommended wattage and take gentle, medium-length draws. A good draw lasts about two to four seconds on a sub-ohm kit. Increase the wattage in small steps until the flavour is full and the vapour is warm but not hot. If the vapour feels too hot, drop the power slightly.

A few further habits help:

• Keep the tank above a third full, so the coil never runs dry.
• Take a short break between long strings of puffs to let the wick catch up.
• If you change flavour, empty the tank, rinse it with warm water, dry it fully and fit a fresh coil. This avoids flavour ghosting from the previous liquid.
• Store the bottle upright, capped and away from heat and sunlight. Once opened, a bottle is best used within a few months, as the flavour slowly fades.
• Keep everything out of reach of children and pets.

Troubleshooting common problems

Most problems with a refillable setup come down to the coil, the wattage or the way the tank was filled. These are the issues vapers meet most often with a sweet, high-VG liquid, and what to try.

• Burnt or acrid taste: usually a dry or worn coil. Check the tank is not nearly empty, lower the wattage, and give the wick time to saturate between puffs. If the taste persists, change the coil, because a burnt coil does not recover.
• Weak or muted flavour: often a coil gunked with sweetener residue. Replace the coil, and check you have not turned the power too low or too high. Check that your palate is not fatigued, which happens when you vape one sweet flavour for long stretches.
• Gurgling or spitting: too much liquid is reaching the coil, or the tank is overfilled. Blow gently back through the mouthpiece, wipe away excess liquid, and consider filling slightly less.
• Leaking from the tank: check the seals and the coil are seated correctly, the tank is not overfilled and the airflow is not blocked. Rubber seals can wear, so replace them if they look worn or stretched.
• Dry hits with a full tank: a thick liquid in a coil that cannot wick it quickly enough. Lower the wattage, take shorter draws, wait between puffs, or choose a coil with larger wicking openings, such as a mesh coil.
• Harsh throat hit: the wattage may be too high, the nicotine strength may be too high for you, or the coil may be burnt. Drop the power first and see if it improves.
• Sore or dry throat and mouth: often caused by dehydration. Drink water regularly. If symptoms continue, stop vaping and speak to a pharmacist or GP.
• Bottle too stiff to squeeze: a cold bottle is firmer. Leave it at room temperature for a few minutes. Do not squeeze so hard that liquid sprays out.
• Coil that will not fire: check the coil is screwed in properly and the contacts are clean and dry. Wipe them gently with a dry cloth or cotton bud.
• Sticky residue on the device: wipe the tank and battery connection with a damp cloth, and let everything dry before reassembling.

If a problem persists after a new coil, a clean tank and a sensible wattage, the cause is more likely to be the hardware than the liquid. Check the tank's manual or the manufacturer's support pages. If you think the liquid itself is faulty, for example if it looks cloudy, smells wrong, has separated or is different from what the label describes, stop using it and contact the shop with the batch code from the bottle.

Value for money

Value with e-liquid comes down to cost per millilitre, how long a bottle lasts, and how much you spend on coils. A 10ml bottle of branded e-liquid sells at a higher price per ml than a 50ml or 100ml shortfill, because you are paying for the small, nicotine-ready format. At 3mg/ml you get a ready-mixed, ready-to-vape liquid with no nicotine shots or mixing required, which is the main advantage of the 10ml format.

To compare fairly, work out your own running cost with a simple method:

• Cost per ml: divide the bottle price by 10. As an illustration only, a bottle at four pounds works out at 40p per ml.
• Bottles per week: a light pod user might use one bottle every one to two weeks, and a heavy sub-ohm user may use one every two to three days.
• Coil cost: add the cost of a coil every one to two weeks. A pack of five mesh coils, spread over the weeks it lasts, adds a modest amount per week.

On those numbers, a light vaper using 10ml a fortnight spends a small amount on liquid. A heavy sub-ohm vaper using 10ml every three days will find a larger bottle format more economical. If you vape heavily, it is worth checking whether the same flavour is available as a 50ml or 100ml shortfill, which has a lower price per ml, and which you would top up with nicotine shots. The 10ml pre-mixed format costs more per ml but removes the extra step and the equipment.

Compared with disposables, refillable vaping is generally cheaper in running costs. A typical disposable offers around 600 puffs from a 2ml capacity and is thrown away afterwards, so the cost per puff and the environmental cost are both higher. A 10ml bottle gives several times that volume of liquid, and the kit you refill lasts for years with new coils. The upfront cost of a starter kit is the main hurdle, and it typically pays itself back within a few weeks for regular vapers.

Value is also about not wasting what you buy. Store the bottle properly, fill your tank sensibly, change coils before they burn out, and use the bottle within a few months of opening. Do those things and a 10ml bottle will give you the full number of puffs the liquid is capable of delivering. Finally, consider the cost of returns and mistakes. Buying a strength or flavour you do not like is the most common source of wasted money, which is why the 3mg strength and No Ice detail in this product's name are worth checking before you order.

How it compares with alternatives

It is fairer to compare Vlad's VG Heisenberg No Ice with categories of product than to claim it beats named competitors on flavour, because taste is personal and brand formulations change. Here is how it sits against the main alternatives UK vapers consider.

• Other 10ml high-VG fruit liquids from UK brands: many established UK brands sell similar blue-fruit and berry flavours in 10ml bottles at 3mg and above. The main differences are sweetness, the VG and PG split, the quality of the flavouring and the price per bottle. If you already like a brand's house style, a comparable flavour from them may suit you equally well. Trying a single bottle is the only reliable way to compare.
• Nicotine salt 10ml liquids: these use a different form of nicotine and are normally sold at 10mg and 20mg strengths for low-power pod kits. They give a smoother hit at higher strengths, but they are not meant for sub-ohm tanks and are not interchangeable with a 3mg freebase liquid.
• Shortfills with nicotine shots: a 50ml or 100ml shortfill with shots gives a lower price per ml and flexible strength, but requires mixing and larger bottles. It suits heavy users more than occasional ones.
• Disposable vapes: disposables need no setup, but they are capped at 20mg/ml and 2ml in the UK, they cost more over time, and they produce more electronic waste. Many people find a refillable kit better value and more flexible once they are past the learning curve.
• Ice versions of the same flavour: if you prefer a cooling finish, an iced variant would suit you better than No Ice. If you want to taste the fruit without menthol, No Ice is the better of the two.

Fairly, this liquid is not for everyone. Its strengths are a smooth VG-led body, a straightforward sweet blue-fruit flavour with no cooling, and a low nicotine strength that suits sub-ohm hardware. Its limitations are the usual ones for a thick liquid. It needs a compatible coil, it can gunk a coil faster than a thinner liquid, and it will not satisfy a heavy smoker on a low-power kit at 3mg.

For most buyers the practical question is whether the flavour matches what they want and whether the hardware matches the liquid. If both answers are yes, this is a sound, ordinary choice in a crowded category. If either answer is no, there are alternatives in the same range or from other brands that will fit better, and checking the price per ml against a comparable bottle takes only a minute before you order.