Pinkman Revamped Vlad's VG 10ml 3mg

Overview

The Pinkman Revamped Vlad's VG 10ml 3mg by Vlad's in Pinkman Revamped at 20mg. Free UK delivery over £20, same-day dispatch on weekday orders before 4pm.

Overview: what Vlad's VG Pinkman Revamped 10ml 3mg is

Vlad's VG Pinkman Revamped is a 10ml bottle of nicotine e-liquid at 3mg/ml (0.3%), sold for refilling open-system vape devices such as sub-ohm tanks, refillable pod kits and pen-style starter kits. It is a freebase nicotine liquid, not a nicotine salt, and that single detail shapes almost everything about how it behaves: the way the nicotine feels in the throat, the kind of device it suits and how much vapour you can reasonably expect from each puff.

The name carries three pieces of information. Vlad's is the brand. VG points to a vegetable glycerine-led recipe, which is the thicker, slightly sweet base that produces dense vapour and a soft throat feel. Pinkman Revamped is the flavour, and the 'Revamped' tag tells you this is an updated take on an earlier Pinkman recipe. If you vaped the older version, expect the same general theme but do not be surprised if the balance of sweetness, tartness and body has shifted a little.

What arrives is simple: one sealed 10ml plastic bottle with a child-resistant cap, a tamper-evident ring and a narrow nozzle, labelled with the ingredients, nicotine strength, batch information and health warning that UK rules require. There is no battery, no coil and no charger in the package, because this is a consumable liquid and not a device. When this page discusses batteries, coils and mesh, it is describing what your device needs so that the liquid performs the way it should.

A few headline points before the detail:

• Volume: 10ml, which is the maximum bottle size for nicotine-containing e-liquid sold in the UK.
• Strength: 3mg/ml, so one full bottle holds 30mg of nicotine in total.
• Style: a sweet, fruit-forward flavour with a smooth, VG-led body.
• Suits: sub-ohm tanks and refillable pod systems that cope well with a thicker liquid.
• Age restriction: sold to adults aged 18 and over only, and intended for existing smokers or vapers.

One thing worth saying plainly: nicotine is addictive, and vaping is not risk-free. The position taken by UK public health bodies is that vaping is substantially less harmful than smoking for adults who switch completely, and that it offers nothing worthwhile to people who do not already use nicotine. If you do not smoke or vape, this is not a product for you. If you do smoke and want to cut down or stop, a low-strength liquid like this one is a common stepping stone, and the NHS runs free stop smoking support that works well alongside vaping.

Specifications at a glance

Below is the specification as we can reasonably state it for this product, written so that you can check it against the label when the bottle arrives. Where a detail can vary between batches or is not something we can confirm from the listing, we say so rather than guess.

• Product type: freebase nicotine e-liquid for refilling open-system vapes.
• Bottle size: 10ml, the largest bottle permitted for nicotine e-liquid under UK rules.
• Nicotine strength: 3mg/ml, which is 0.3% by volume. A full bottle holds 30mg of nicotine in total.
• Base: VG-led blend. The exact propylene glycol to vegetable glycerine split is shown on the label or batch information, and it is worth checking if you are matching the liquid to a specific coil.
• Flavour: Pinkman, Revamped recipe, a sweet pink-toned fruit and candy style.
• Bottle and closure: plastic bottle with a narrow nozzle, child-resistant cap and tamper-evident ring.
• Typical device pairing: sub-ohm tanks, refillable pod kits with a low-resistance coil, and pen-style kits with a wide wicking port.
• Not for use in: single-use disposables (these are pre-filled and cannot be refilled), or closed pod systems that accept only their own sealed cartridges.
• Age restriction: 18+, with age verification at checkout.

Reading the numbers is straightforward once you know the units. 3mg/ml means three milligrams of nicotine in every millilitre of liquid. A 10ml bottle therefore contains 30mg in total. UK rules limit refillable tanks to 2ml, so one bottle fills a standard tank about five times, and each full 2ml tank holds around 6mg of nicotine. That last figure is a handy way to compare strengths: a tank of 3mg liquid holds half the nicotine of a tank of 6mg liquid, and a quarter of a tank of 12mg liquid.

The UK nicotine strength ceiling is 20mg/ml, and it applies both to e-liquid and to disposable vapes. At 3mg/ml this liquid sits far below that cap, towards the lower end of what is commonly sold. Strengths at or near the cap are normally nicotine salt products designed for low-power, mouth-to-lung devices, which is a different category with a different feel.

An ingredients note: UK regulations require the label to list ingredients, and nicotine liquids carry a health warning. If you have a known sensitivity to propylene glycol, vegetable glycerine or flavourings, read the label before buying and stop using the product if you develop a rash, wheeze or persistent sore throat. Nothing in this listing is medical advice, and anyone with a heart condition, who is pregnant, or who is unsure whether nicotine is suitable should speak to a GP or pharmacist first.

Flavour profile: what Pinkman Revamped tastes like

Pinkman is a flavour theme rather than a single ingredient, and the name points towards a sweet, pink-toned profile: berry-led fruitiness backed by a soft, candy-like sweetness. That is the general territory this liquid occupies, and it is a familiar one for UK vapers who like sweets, pick-and-mix and fruit-cordial style flavours. Because flavour recipes are proprietary and a 'Revamped' version can differ from the original, treat any flavour notes on the bottle or product listing as the authority and treat this description as a guide to the general character.

On the inhale, expect the fruit to arrive first. With a VG-led liquid the fruit tends to feel rounded rather than sharp, so a gentle tartness is more likely than a sour bite. On the exhale, the sweeter, candy-like layer usually takes over and lingers briefly on the tongue. Nothing in the name suggests menthol or ice, so a strong cooling effect is not something to expect. If cooling matters to you, check the label rather than assume.

Several things change how the flavour comes across in your own device:

• Power: lower wattage keeps the vapour cooler and the flavour more defined. Higher wattage warms the vapour, makes it sweeter and heavier, and can flatten the lighter top notes.
• Airflow: a tighter airflow concentrates the flavour. Wide-open airflow gives more vapour but a slightly more diluted taste.
• Coil condition: sweet liquids leave residue on coils, and a tired coil mutes fruit notes first. If Pinkman suddenly tastes flat, change the coil before blaming the liquid.
• Nicotine: at 3mg the nicotine adds only a light throat presence, so the flavour is not overpowered by any peppery bite. This is one reason low strengths appeal to flavour-focused vapers.

Sweet profiles are also where vaper's tongue shows up most. This is a temporary dulling of taste that comes from vaping the same flavour all day. If the taste seems to fade after a few days, rotating to a different flavour for a day or two, drinking water and not chain-vaping usually restores it.

It is also worth being honest that sweetness is subjective. One person's pleasantly sweet is another person's too sugary. If you normally prefer tobacco, menthol or dry flavours, a sweet pink fruit liquid may feel cloying after a few tanks. If you enjoy sweets and berry flavours, it should sit comfortably in that corner of the market. Finally, remember that storage affects taste: a bottle kept somewhere cool and dark holds its flavour well, while one left on a sunny windowsill or in a hot car can darken and drift in flavour over time.

Performance and vapour delivery

This is a VG-led liquid, and that is the biggest single factor in how it performs. Vegetable glycerine produces thicker, denser vapour than propylene glycol and carries sweet flavours smoothly. In practical terms you get plenty of visible vapour and a soft throat feel, particularly in devices designed with generous airflow.

Pair that with a 3mg strength and you get what many vapers call a direct-to-lung (DTL) experience: a long, slow, open-airflow draw in which the vapour goes straight to the lungs rather than being held in the mouth first. Low nicotine matters here because DTL puffs move a lot of vapour, and the nicotine delivered per puff rises with the volume of that vapour. At 3mg each puff stays gentle, and you can take larger draws without the harshness that a higher strength would bring.

Real-world numbers depend entirely on your device and habits, so treat the following as rough guidance rather than a guarantee:

• Sub-ohm tank at 30 to 60W: roughly 100 to 150 puffs per millilitre, which puts a 10ml bottle at about 1,000 to 1,500 puffs.
• Refillable pod kit with a 0.6 to 1.0 ohm coil at low power: roughly 200 to 300 puffs per millilitre, or around 2,000 to 3,000 puffs per bottle.
• Typical daily consumption: 2 to 4ml for lighter pod use and 4 to 8ml in a sub-ohm tank, so a bottle can last anywhere from a day and a half to about a week.

Throat hit is light at this strength. Ex-smokers who found stronger liquids harsh often welcome that, while vapers who like a sharp, noticeable hit may find 3mg too soft and prefer a higher strength. Vapour temperature has a bigger effect on perceived hit than most people expect, so before changing strength it is worth trying a slightly lower wattage to see whether a cooler, crisper draw suits you.

Thickness has a trade-off. A VG-heavy liquid flows more slowly through cotton, so a coil that is run too hard, or a device with small wicking holes, can struggle to keep up. The symptoms are a hot or dry taste on the first puffs after a refill or towards the end of a long session. The fix is almost always to let the coil soak after filling, to use sensible wattage for the coil rating, and to avoid chain-vaping so the cotton has time to re-saturate. A liquid like this also coats coils faster than a thinner one, which affects how long each coil lasts, covered further below.

Design and build quality of the bottle

For a liquid, design means the bottle, the closure and the label, and these matter more than they seem. The 10ml bottle is plastic and slightly squeezable, with a narrow nozzle that fits the fill ports of most modern tanks and pod kits. The thin tip lets you aim liquid at the fill port instead of the surrounding glass, which cuts down on spills and sticky fingers. A few tanks have very small fill ports, and for those a slow squeeze and a steady hand does the job.

The cap is child-resistant, which is a UK requirement for nicotine e-liquid, and it is paired with a tamper-evident ring that breaks when the bottle is first opened. If the ring is already broken when the parcel arrives, do not use the bottle and contact the shop. Child-resistant does not mean childproof: any nicotine liquid needs storing out of reach of children and pets, ideally in a drawer or cupboard that closes, and never in a bag or pocket where the cap can loosen.

The label is where you check the facts that count:

• Nicotine strength: printed clearly as 3mg/ml, so you can confirm you have the right bottle at a glance.
• Ingredients: the list of base liquids, flavourings and nicotine.
• Batch or lot number: useful if you ever need to report a problem or ask about a recall.
• Health warning: the statutory notice that the product contains nicotine, a highly addictive substance.
• Contact details: the responsible company, as UK notification rules require.

On build quality, plastic e-liquid bottles from established UK brands are generally consistent, and a well-made bottle should not weep at the neck or leave residue under the cap. Check for a firm seal when you open the box, and keep the bottle upright. If liquid has crept around the shoulder or the label is sticky, wipe it clean and let us know if the loss looks significant.

One design point specific to VG-led liquids: they are thick, and in cold weather they thicken further, which can make the flow from a narrow nozzle slow. Warming the bottle in your hand for a minute loosens it up. Avoid heating it in hot water or near a radiator, as that can degrade flavour and damage the plastic. Keep the bottle away from direct sunlight too, since light and heat are the two main enemies of e-liquid flavour.

Battery and charging: what your device needs

The liquid itself has no battery, so there is nothing to charge in the bottle. What matters is the device you put it in, because a liquid with a thicker VG-led body performs more consistently when the battery can deliver steady, consistent power. A weak or half-flat battery produces cooler, thinner vapour and can leave the coil only partly heated, which makes thick liquid taste muted and can cause a gurgling, spitting draw.

As a rough guide to what to look for in a matching device:

• Pen-style and compact sub-ohm kits: built-in batteries of around 1,000 to 1,500mAh, suited to 20 to 40W use with a day's moderate vaping or less.
• Box-style kits with a single removable cell: usually an 18650 or 21700 battery of roughly 2,500 to 4,000mAh, delivering 40 to 80W with room to spare.
• Refillable pod kits: smaller batteries of around 400 to 1,000mAh, matched to coils that run at low power, so a charge typically lasts most of a day.

Charging habits protect both the device and your safety. Use the cable that came with the kit, or a reputable USB-C equivalent, and plug it into a standard USB wall adapter rather than an unknown high-output charger. Do not leave a vape charging overnight or while you are out, do not charge on a bed, sofa or any soft surface, and stop using a device that gets hot, swells or smells odd. If your device uses removable cells, carry spares in a plastic case and not loose in a pocket with keys or coins.

Disposal is where UK rules are practical rather than abstract. Single-use disposable vapes were banned from sale across Great Britain from 1 June 2025, which is one reason refillable kits and bottled e-liquid like this have become the mainstream route. Older disposables you still have, and any refillable vape you retire, count as waste electrical equipment. Retailers that sell vapes must offer take-back, and many supermarkets, convenience stores, vape shops and council recycling centres also have collection points. The Recycle Your Electricals postcode finder will show your nearest drop-off. Loose lithium cells go to battery recycling bins, not household rubbish or normal recycling, because damaged cells can cause fires in bin lorries and sorting plants.

For the liquid, an empty bottle should be drained as far as possible, capped and handled according to your local council's guidance on small plastics. Never tip leftover nicotine liquid down a drain or into the garden.

Coils, mesh and wicking: matching the liquid to your tank

The coil is where the liquid becomes vapour, so it has more influence over your experience than any other part of the device. Because this liquid is VG-led, the safest approach is to choose coils designed for thicker liquids: those with large wicking ports in the coil head and a resistance and power rating that suits direct-to-lung or relaxed restricted-lung use.

The main coil types you will meet, and how they suit this liquid:

• Mesh coils (typically 0.15 to 0.4 ohm): a flat sheet of mesh with a large surface area, giving fast heat-up, even flavour and strong vapour. They handle thick VG-led liquids well and are common in modern sub-ohm tanks, usually rated for around 40 to 80W. Always check the wattage printed on the coil.
• Round-wire sub-ohm coils (typically 0.3 to 0.6 ohm): a simpler wound-wire design, generally less flavour-dense than mesh but more forgiving at lower power.
• Regulated-draw or loose-draw pod coils (typically 0.6 to 1.0 ohm): intended for gentler, lower-power use in pod kits at roughly 12 to 25W, and a reasonable match for a lighter, 3mg style of vaping.
• High-resistance mouth-to-lung coils (1.0 ohm and above): designed for thinner, higher-PG liquids. A very thick VG-heavy liquid can wick slowly through these, so check the PG and VG split on the label before using one.

Wicking is the process by which the cotton draws liquid to the heating element, and it is the reason for the most common mistake with new coils: vaping before the cotton has soaked. After fitting a new coil, drip a little liquid directly onto the exposed cotton through the wicking ports, fill the tank, and wait five to ten minutes. Then take a few gentle, low-power puffs before moving up to your normal setting. Skipping the wait is the most common way to burn a fresh coil within the first tank.

Sweet liquids produce more residue than plain ones, which shortens coil life. Plan on a coil lasting anywhere from about one to three weeks, depending on how heavily you vape and how high you run the power. Signs of a tiring coil are a muted or slightly burnt flavour, a darkened coil head, spluttering, or the need to keep turning the power up to recover the taste.

If you are not sure which coil your tank takes, check the tank's name and model printed on its base or in the manual, because coil heads are not interchangeable between brands. Matching the coil to the manufacturer's stated wattage range is more reliable than any rule of thumb.

Nicotine strength guidance: is 3mg right for you?

Choosing a nicotine strength is about balance. Too little and you may keep reaching for the device, or drift back to cigarettes. Too much and you can feel lightheaded, nauseous or jittery. At 3mg/ml this liquid is a low-to-moderate freebase strength, and it suits devices that produce a lot of vapour per puff.

As a general starting framework used by many UK vape shops, and not a prescription:

• 0 to 3mg: large, airy sub-ohm draws, usually for vapers who have already reduced their nicotine intake or who vape mainly for habit and flavour.
• 3 to 6mg: sub-ohm users who still want a little nicotine, or former light smokers.
• 6 to 12mg: sub-ohm use for moderate smokers, or tighter-draw devices for lighter ones.
• 10 to 20mg nicotine salts: low-power mouth-to-lung pod devices for heavier smokers. 20mg/ml is the UK maximum for e-liquid and disposables alike.

Strength interacts with how you vape. A DTL puff pulls roughly three to five times as much vapour as a mouth-to-lung puff, so a lower strength is appropriate for open-airflow tanks. If you switch from a tight pod to a wide-open sub-ohm tank without lowering the strength, you will usually get too much nicotine and feel it quickly.

Signs that 3mg may be too low for you: persistent cravings, chain-vaping, irritability, or still smoking cigarettes alongside. In that case, move up one step to 6mg rather than jumping to a high strength, and give it a week. Signs that it is too high: headaches, dizziness, a racing heart, nausea or a burning throat. Reduce your intake, drink water, and if you feel unwell, stop and seek advice.

Remember that the aim for most people moving to vaping is to leave cigarettes behind completely. Part-smoking and part-vaping keeps most of the health risk of smoking, so pick a strength that lets you stop smoking altogether, then step down gradually over time. The NHS Better Health service and local stop smoking services can help you plan the step-down and offer support that increases your chances of success.

Finally, note that you cannot add a nicotine shot to a full 10ml bottle. If you want a different strength, buy the matching bottle instead of trying to adjust this one, since the bottle is sold filled and sealed to the stated strength under UK rules.

Who Vlad's VG Pinkman Revamped is for

This liquid is a sensible fit for a specific group of adult vapers, and being clear about that is more useful than pretending it suits everyone.

It is a good match for:

• Smokers who have switched and are reducing nicotine: 3mg is a common step-down strength for sub-ohm vapers who started higher.
• Sub-ohm and relaxed-draw users: anyone with a tank or pod system that handles a VG-led liquid and wants dense vapour with a gentle throat feel.
• People who like sweet, fruity flavours: the Pinkman theme is built around berry sweetness and candy tones.
• Vapers who prefer to refill rather than throw away: a 10ml bottle keeps costs and waste down compared with single-use products, and fits a quick refill routine.
• Flavour-chasers who rotate bottles: 10ml is a convenient size for trying a flavour without committing to a 50ml.

It is probably not for:

• Non-smokers, under 18s and anyone who has never used nicotine: nicotine is addictive and there is no benefit in starting.
• Pregnant or breastfeeding women, and people with heart conditions who have not taken medical advice.
• Heavy smokers using tight-draw pod devices: 3mg freebase is unlikely to satisfy cravings in a low-vapour mouth-to-lung setup, where a nicotine salt at 10 to 20mg is the usual route.
• Vapers who like cooling, menthol or tobacco flavours: this is a sweet fruit profile.
• Anyone using a closed or pre-filled pod system: if your device only accepts its own sealed cartridges, this bottle will not work in it.
• People who want a hard throat hit: 3mg in a smooth VG base is soft by design.

If you are new to vaping and unsure where to start, a local independent vape shop can match a device, coil and strength to your smoking history, and that advice is worth getting at least once. If you are already settled on a device, the questions are simpler: does the coil suit a VG-led liquid, is 3mg the right strength for the airflow you use, and do you like sweet berry flavours. If the answers are yes, this liquid fits the brief.

It also helps to be realistic about expectations. No single bottle will stop you smoking by itself. What helps is the combination of the right device, a strength that stops cravings, a flavour you enjoy enough to prefer over tobacco, and a plan. This liquid covers one of those four pieces.

How to fill, use and store it

Using e-liquid is easy, but a handful of habits keep the experience clean, safe and consistent.

Filling a tank or pod:

• Turn the device off or lock the fire button, and wash and dry your hands so no oil or residue gets near the fill port.
• Remove the tank top or open the fill port as the manufacturer instructs. Many tanks twist off or slide aside; some pods have a silicone plug.
• Squeeze the bottle slowly and aim the nozzle at the inside wall of the tank, not straight at the central chimney. Leave a small air gap at the top, since filling to the brim causes flooding when you inhale.
• Close the fill port firmly, wipe off any spills and let the coil soak for five to ten minutes before vaping.

Vaping habits that work well with a VG-led liquid:

• Take slow, steady draws of two to four seconds with a short pause between puffs to let the cotton re-saturate.
• Start at the lower end of the wattage range printed on the coil, then raise power in small steps if you want warmer, fuller vapour.
• Use a smooth, relaxed inhale for sub-ohm tanks rather than a sharp pull.
• Do not vape a nearly empty tank. Refill when the liquid drops to about a quarter to avoid dry hits.

Storage: keep the bottle upright, capped and in a cool, dark place out of reach of children and pets. Do not store it near heat or in a vehicle. Sealed bottles keep their quality for a long time, but once opened it is sensible to use the liquid within a few months to keep the flavour true, because exposure to air and light gradually alters it.

Safety and spills: nicotine can be absorbed through the skin and is harmful if swallowed. If liquid gets on your skin, wash it off with soap and water. If it gets into your eyes, rinse with plenty of clean water and seek medical advice. If a child or pet swallows any, treat it as an emergency: call 999, or contact NHS 111 or a poison information service for advice, and keep the bottle to show them the strength and ingredients.

Disposal: empty bottles should be disposed of in line with your local council's rules for small plastics, and you should never pour leftover liquid down a sink or drain. Devices and batteries belong at a vape-recycling or electrical recycling drop-off point, as covered in the battery section above.

Troubleshooting common problems

Most problems that look like a faulty liquid are really about how the liquid, coil and power interact. Here are the usual culprits and what normally fixes them.

• Burnt or acrid taste: usually a dry coil from vaping too soon after a refill, running too much power, or a coil that has reached the end of its life. Let a fresh coil soak, drop the wattage and change the coil if the taste persists.
• Dry or weak hits with a full tank: thick liquid wicking slowly. Reduce the power slightly, take longer pauses between puffs, check that the coil's wicking holes are not blocked by the fill level, and make sure the coil is rated for thicker liquids.
• Gurgling or spitting: condensation or flooding in the airflow. Do not overfill, tilt the device and blow gently through the mouthpiece with the power off, then wipe the drip tray or condensation area.
• Leaking from the tank or pod: a loose seal, a cracked tank, a damaged O-ring or an overfilled chamber. Tighten the parts, replace worn seals, avoid filling to the top, and do not store the device on its side.
• Flat, muted flavour: a tired coil or vaper's tongue. Change the coil, rotate to a different flavour for a day, and rinse your mouth with water.
• Harsh throat hit: too much power for the coil, an overly high nicotine strength for your airflow, or a very dry coil. Lower the wattage, open the airflow a little and check that you are using the right strength.
• Liquid pours slowly from the bottle: VG is thick, especially when cold. Warm the bottle in your hand and squeeze gently.
• Colour has darkened: liquid darkens naturally with age and exposure to light or heat. A mild change is normal; if the smell or taste has clearly changed, stop using the bottle.
• Sweet residue and sticky fingers: wipe the nozzle and fill port after each refill. Sugary flavours leave tacky deposits that can attract dust.
• Coils dying quickly: sweet, thick liquids clog coils faster. Lower the power, take fewer back-to-back puffs and change the coil as soon as the flavour drops, not after it has burnt.

If you have tried these fixes with a fresh coil and a charged battery and the liquid still tastes wrong, check the batch number on the label, note the symptoms and get in touch with the shop. A genuine fault with a sealed bottle is covered by the Consumer Rights Act 2015, and we would rather hear about it than have you put up with a bad bottle.

Value for money and fair comparisons

Value in e-liquid is partly price per millilitre and partly how well the product suits your habits. On pure price per ml, 10ml bottles cost more than larger formats, which is the nature of the size. What you pay for is convenience: a ready-to-use strength, no mixing, a pocketable bottle and the freedom to try a flavour without spending on a large bottle. Check the price on the product page for the current figure, and compare it with the cost per ml of other formats.

Here is how this product stacks up against the alternatives UK vapers usually weigh up:

• Versus 50ml shortfill plus nicotine shots: shortfills are cheaper per ml and a good fit for sub-ohm users who go through a lot of liquid. The downsides are the mixing, the need to buy shots separately, and a bulkier bottle. A 10ml bottle at 3mg is simpler, more portable and avoids mixing mistakes. If you vape more than about 5ml a day, a shortfill will likely cost less over a month.
• Versus 10ml nicotine salts: nicotine salts at 10 to 20mg are smoother at high strengths and better for low-power, mouth-to-lung pod kits. For a sub-ohm or relaxed-draw device, a 3mg freebase is generally the more appropriate choice, and a nicotine salt in a high-power tank would be too strong. They are different tools for different devices rather than better and worse options.
• Versus other sweet berry or candy liquids: there are plenty of pink-fruit and candy flavours from other UK brands, and all vary in sweetness, tartness and body. If you already have a favourite, this will not necessarily beat it. What it offers is a VG-led body and a low strength in a 10ml bottle, for anyone who enjoys the theme.
• Versus closed or pre-filled pods: proprietary pods are convenient but you pay a premium per ml and are tied to one brand's flavours. A bottle gives more flavour choice and lower running costs once you own a refillable device.
• Versus single-use disposables: these are no longer legally sold in Great Britain, and in any case a refillable kit with bottled liquid produces far less waste and is cheaper per puff over time.

For a typical sub-ohm user taking 4ml a day, one bottle covers roughly two and a half days. That adds up if you rely on 10ml bottles alone, so many experienced vapers keep a larger bottle for daily use and use 10ml bottles for flavour variety and travel. If you vape lightly in a pod kit, one bottle can last most of a week, and then the cost per day is easy to justify.

In short, this is fair value if you like the flavour, use a device that suits a VG-led liquid, and want 3mg without mixing. If your priority is the lowest possible cost per millilitre, consider a shortfill instead. That is an honest trade-off, and which side of it you land on depends on how much you vape.